El Fri, Feb 11, 2000,
Antonio Lara Quirós...
Buenas, pues eso... alguien sabe de recursos por ahi
sueltos sobre ACPI y algo parecido al Dual Monitor de
windows (dos tarj. graficas dos monitores y poder abrir
una consola en cada uno, o tambien poder llegar a hacerlo
con
El Wed, Feb 09, 2000 at 02:09:44PM +0100,
Fernando Sanchez dijo:
On Wed, 9 Feb 2000, Roberto Henriquez Laurent wrote:
Yo movi el directorio /usr entre dos particiones usando la vieja (según
tar cvf - . | (cd /usr2; tar xvf -)
(cd $1; tar cf - . ) | (cd $2; tar xvpf -) es más fino:
Cesar wrote:
Pookie wrote:
por el mensaje que pone parece que tengas que poner unos : entre el host i
el directorio es decir:
192.168.0.3:/mnt/PC1 en lugar de 192.168.0.3 /mnt/PC1
No he usado nunca NFS, asi que no se si sera eso.. :P pero prueba, y si es
eso pos dimelo :)
-
Saludos colisteros
Estoy intentando que mi X-Win de Debian Hamm (2.0.34)
abra una serie
de ventanas de inicio en mi flamante WindowMaker
por medio del archivo~/.xinitrc .
Mi pregunta es la siguiente ¿ Es posible que
Hola a todos/as:
Desde hace algún tiempo se viene discutiendo aquí sobre los problemas
y beneficios que conlleva el que personas no suscritas a la lista
envíen correo a la misma.
Yo quería dar mi opinión sobre lo que entiendo que debe ser una lista
de correo:
1.- Una lista de correo es un medio
El viernes 11 de febrero de 2000 a la(s) 11:34:28 +0100, Conrado Badenas
contaba:
4b) rdate, con su opción -a, usa la llamada al sistema adjtimex(2) para
ir cambiando gradualmente la hora, lo cual es importante por el tema de
los crons.
¿Y cuánto tarda? Lo digo porque una vez mi
Hola a todos!
Tengo el siguiente problema compilando programas gtk (en este caso,
rep-gtk para el sawmill)
checking for gtk-config... (cached) /usr/bin/gtk-config
checking for GTK - version = 1.2.0... no
*** Could not run GTK test program, checking why...
*** The test program failed to compile
El Sun, Feb 13, 2000 at 01:55:35PM +0100, Juan Ignacio Llona dijo:
Hola a todos!
Tengo el siguiente problema compilando programas gtk (en este caso,
rep-gtk para el sawmill)
[./configure no encuentra GTK=1.2, y está instalado libgtk1, 1.1 y 1.2]
Alguien me puede decir qué es lo que está
Está disponible en: http://quark.fe.up.pt/orca
Una critica: ¡¡¡Hay que ver como se lo curran algunos!!! :-
Un temor: Me temo lo peor, el dibujo de la ORCA, ¿lo has hecho en
postcript? ;-)
Un comentario: Del diccionario i2e aparece Alfredo Casademunt como autor. ¿No
lo hizo tambien
El jueves 10 de febrero de 2000 a la(s) 16:07:59 +0200, [EMAIL PROTECTED]
contaba:
En mi equipo tengo dos discos duros, /dev/hda con 6 GB. y /dev/hdb con 4
GB. el caso es que tengo instalado la partición Linux en el /dev/hdb y
dentro de poco me ocmpro un nuevo equipo sin disco duro y quiero
El viernes 11 de febrero de 2000 a la(s) 13:48:56 +0100, Tejada Lacaci, Antonio
contaba:
En el propio site de nVidia tienes los servidores X y las GLX para
todas las tarjetas de nVidia.
¿Qué es GLX? Yo estuve buscando información sobre esto por
sites de nvidia y tal,
El sábado 12 de febrero de 2000 a la(s) 00:07:15 +0100, Andres Herrera contaba:
Me parece que la svgalib esta muy infrautilizada, eclipsada por las X y por la
proliferacion de aplicaciones en modo grafico (para las X).
A mí lo que me mosquea de svgalib es que los programas que las
Por fin me acorde de enviarles este correo, pero bueno, mas
vale tarde que nunca.
En http://reinhold.bachrain.de/lilo.patch.html pueden encontrar
un parche para lilo 20 que mostrará una imagen en vez del texto
plano que vemos siempre. Pueden encontrar algunas imagenes en:
I have now experienced problems with two different computers using old
versions of Phoenix BIOS, when booting the Debian 2.1 rescue floppy. One
was a Packard Bell system at a free Linux Install our LUG did a couple
months ago... the other is a Gateway system. Both 486's.
It gets give the
A couple people have suggested that, but isn't it just easier to
do a dpkg --purge xdm?
You may want to connect from another X machine to your local machine,
and login via XDMCP ; in this case, all that is required is to tell
xdm not to start an xserver on your machine, but to continue to
I reall need help for this:
I have standard Debian GNU/Linux (Slink) 2.1. Since I have installed it (I
tried to reinstall 3 times to get rid of it), I get following error in couple
of X applications:
No type converter registered for String to Bitmap conversion.
This shows when I run
The libforms 88 can be downloaded from Debian site.
Use the apt method in dselect, go in Selection, type / and libform, type
+, go out, and choose Install.
Marko
repl: bad addresses:
@murphy.debian.org,
[EMAIL PROTECTED] [EMAIL PROTECTED] -- no sub-domain
in domain-part of
I have Slink 2.1.
When I start X, either via XDM or via startx, switch to konsole, switch back
to X and in the same time move my mouse vigorously (or accidentaly) my X
crashes.
If I leave the mouse while switching to X for couple of seconds, everything is
alright.
I have ps/2 mouse and it
Hi there,
again a question form someone how has changed from SuSE to Debian:
- after building my RAID-Array I need to know how to mount it
automatically at bootup? In SuSE there is a file in
/sbin/init.d/boot.local where I can place my own commands which are
run at bootup time. The path might be
Hi,
it's me again. There are still a lot of questions but I hope someone
will help me again.
- Is there an easy way to define directory colors for the use in any
virtual console? For example every executable script should be listed in
red, any directory in blue, and so on
Thanks in
On Sun, Feb 13, 2000 at 02:03:01AM +0100, [EMAIL PROTECTED] wrote:
Hi,
it's me again. There are still a lot of questions but I hope someone
will help me again.
- Is there an easy way to define directory colors for the use in any
virtual console? For example every executable script should
- Is there an easy way to define directory colors for the use in any
virtual console? For example every executable script should be listed in
red, any directory in blue, and so on
Put this in your ~/.bashrc
export LS_OPTIONS='--color=auto'
eval `dircolors`
alias ls='ls -F
I realize this is a volunteer project and all, but the search engine
on the Debian web site has been down since April of 1999, and the Y2K
problem on the mailing list archive search engine hasn't been fixed,
either. Is anyone working on these?
I'd volunteer if I knew anything about maintaining
On Sun, Feb 13, 2000 at 01:59:23AM +0100, [EMAIL PROTECTED] wrote:
Hi there,
again a question form someone how has changed from SuSE to Debian:
- after building my RAID-Array I need to know how to mount it
automatically at bootup? In SuSE there is a file in
/sbin/init.d/boot.local where I
This depents.
On my old slink system using mdutils, md devices got started
automatically by
/etc/rcS.d/S25mdutils
Now on my potato system I'm using the new raidtools 0.90 wich need a
kernel patch. With them the kernel autodetects the md devices if the
partitions have type 0xfd.
I
On Sat, Feb 12, 2000 at 03:48:58AM +0100, Marko Cehaja wrote:
I have Slink 2.1.
When I start X, either via XDM or via startx, switch to konsole, switch back
to X and in the same time move my mouse vigorously (or accidentaly) my X
crashes.
If I leave the mouse while switching to X for
On Sat, Feb 12, 2000 at 05:59:28PM -0600, Jonathan Hall wrote:
I have now experienced problems with two different computers using old
versions of Phoenix BIOS, when booting the Debian 2.1 rescue floppy. One
was a Packard Bell system at a free Linux Install our LUG did a couple
months ago...
For the last couple days, I can't compile programs that depend on some X
libs. At first, I thought it was a problem with the first program I
tried, but now another program that I've compiled before is giving the
same exact complaints:
/usr/bin/ld: warning: libXi.so.6, needed by
Try doing a search for lame or notlame on freshmeat.net...
On 10-Feb-2000 Shadow_OF_Darkness wrote:
i want to get a wav to mp3 convertor ...
On Sat, Feb 12, 2000 at 06:27:52PM -0800, Eric G . Miller wrote:
For the last couple days, I can't compile programs that depend on some X
libs. At first, I thought it was a problem with the first program I
tried, but now another program that I've compiled before is giving the
same exact
David J. Kanter wrote:
On Sat, Feb 12, 2000 at 08:49:22AM -0600, John Foster wrote:
I have Debian Potato using Enlightenment set up on my server. I want to
try out the KDE applications with the Enlightenment connections. I would
appreciate tips suggestions etc. from anyone using these
hello,
I would like to know where can I download a binary format of potato
kernel version 2.2.13 so that I may use it to recompile my kernel.
thank you.
I want to use the KDE Settings in Enlightenment to utilize the KDE apps.
You mean you want to adjust the setting in KDE Control Center for the
programs you use withine Ice-Gnome/Enlightenment? Have you tried
running something like kcontrol or kcontrolcenter? Something similar
out to do it.
I do
Felipe Alvarez Harnecker wrote:
Hi,
It's there any decent e-commerce package that runs on debian??
I don't care if it is commercial.
I know intershop runs on Suse but never succeded to install it under debian.
any pointer would be great.
On Sat, Feb 12, 2000 at 09:53:44PM -0500, Ben Collins wrote:
Check the perms on /etc/ld.so.conf and make sure they 644. If not them
chmod 644 /etc/ld.so.conf and rerun ldconfig.
Sure enough they were 600. Is that a Debian default or did some package
change them for me?
--
On Sat, Feb 12, 2000 at 08:02:39PM -0800, Eric G . Miller wrote:
On Sat, Feb 12, 2000 at 09:53:44PM -0500, Ben Collins wrote:
Check the perms on /etc/ld.so.conf and make sure they 644. If not them
chmod 644 /etc/ld.so.conf and rerun ldconfig.
Sure enough they were 600. Is that a Debian
Bart Szyszka wrote:
It sounds like you want nothing from KDE, then, except to possibly be
able
to run KDE programs? What happens when you try to run them?
That is exactly what I want to know :-))??
--
AdVance-Computing Systems
I have a sparc 5, which I've set up as an imap server through a ssl
tunnel (using stunnel) and it is very unstable. Its running potato. It
boots up, runs stunnel and ssh a daemons, the rest of the standard stuff
though inetd, and everything works fine. Eventually, in a matter of
hours, things
In a nut shell,
I am running Win98. (early flaky pirate version)Trying to
install Debian 2.1.
I have a 4gig hd with one partition that includes Win98 in the
fat32 format.
fdisk shows the full 4gigs but Win98 only shows 2gig. (1gig
used and 1gig free)
It would be labor and cost intensive to
I just did an apt-get dist-upgrade to the newest frozen packages; upgrading ppp
REMOVED ppp-pam. Now I cannot connect to the Internet via Debian. I've got to
use Mandrake instead.
Is this some wierd dependency problem?
--
David Kanter
Northwestern University
Evanston, Illinois USA
[EMAIL
On 13-Feb-2000 S. Salman Ahmed wrote:
DK == David Kanter [EMAIL PROTECTED] writes:
DK I just did an apt-get dist-upgrade to the newest frozen
DK packages; upgrading ppp REMOVED ppp-pam. Now I cannot connect to
DK the Internet via Debian. I've got to use Mandrake instead.
DK
hello, I went serching through many of the mirrored and primary ftp site,
and I really had no idea where I was supposed to be looking to find
debian itself, can you please help me out? (possibly give me the exact
link for it)
I am executing a Linear Program program I wrote and
compiled. It terminates without generating output (but creates the output file)
with a "Segmentation fault"
I'm trying to convert programs to run under g++
which I previously developed using Visual c 5.0 and would appreciate any help in
Anton Emmerfors [EMAIL PROTECTED] writes:
Hello,
I have a problem:
Since a few days something is sending out IGMP packages to 224.0.0.1
When my family added an iMac to our internal network I started getting
a few IGMP packets each time the iMac powers up; don't remember the
dest. address,
Hi,
I had a similar problem and with X suddenly crashing...
Even after updating the xfree86 version, I still had X suddenling
crashing on me.
I later realized that it was my video card that had gone bust! Once I
replaced my video card, my X windows has never been more stable.. :)
But this
On Sun, 13 Feb 2000, davidturetsky wrote:
davidt I am executing a Linear Program program I wrote and compiled. It
terminates without generating output (but creates the output file) with a
Segmentation fault
davidt
davidt I'm trying to convert programs to run under g++ which I previously
On 13-Feb-2000, davidturetsky [EMAIL PROTECTED] wrote:
I am executing a Linear Program program I wrote and compiled. It
terminates without generating output (but creates the output file)
with a Segmentation fault
A segmentation fault occurs when you attempt to access memory that you
are not
On Sat, Feb 12, 2000 at 11:47:24PM -0500, Ben Stine wrote:
In a nut shell,
I am running Win98. (early flaky pirate version)Trying to install Debian 2.1.
I have a 4gig hd with one partition that includes Win98 in the fat32 format.
fdisk shows the full 4gigs but Win98 only shows 2gig. (1gig used
Hi folks,
sorry to bother you. I received a virus which is Pretty Park.exe.
I think I had accidentally activated it and spread it out to everyone
on my addresses book. Quickly deleted it and don't open that.
Sorry again!
From
Jit Chien
I Just recieved this file, I'm sorry if it had
Thanks, Pete
I see from further investigation that gcc wants me to be more actively
concerned with memory management than was required under Visual C, and I was
logging on to apologize for bothering the list. I posted because this code
ran cleanly under Visual C, so I thought I ran into a Linux
On Fri, Feb 11, 2000 at 10:19:44PM -0500, Fabien Ninoles generated a stream of
1s and 0s:
On Mon, Jan 17, 2000 at 01:59:25PM +, Mario Jorge Nunes Filipe wrote:
Hi
I wonder if there is any open-source project-management (à lá
MS-Project) tool available, even if not debianized?
Check
I used to have a Debian test-based logon screen with a red swirl logo on
the left composed of ASCII characters. I can't for the life of me
remember the name of the package to re-install it. I have searched
www.debian.org with all manner of words -boot, debian-boot and so on but
I can't find it.
On Sun, Feb 13, 2000 at 10:05:00AM +, Phillip Deackes wrote:
I used to have a Debian test-based logon screen with a red swirl logo on
the left composed of ASCII characters. I can't for the life of me
remember the name of the package to re-install it. I have searched
www.debian.org with all
On Thu, Mar 20, 2036 at 11:31:14PM -0800, Steve Winston wrote:
Nor does my slink have TKinter. Why, o why?
We , or at least I, should read our Python for dummies.
Glob, fnmatch eo rside in python-misc, and it was not installed.
I believe Tkinter is another .deb
egbert
--
Egbert Bouwman -
Without spending another $50 for partition software, can I split the
current partition?
If so, how?
Try Partition Manager from http://www.paragon.ru/;. We are using this
for a long time for all of our workstations and servers and also for all
our clients computers whitout any problem.
Uwe
what does this mean?
kernel panic: can't mount root fs on 01:00
many thanks in advance,
~rick
[EMAIL PROTECTED] (davidturetsky) wrote:
I see from further investigation that gcc wants me to be more actively
concerned with memory management than was required under Visual C, and I was
logging on to apologize for bothering the list. I posted because this code
ran cleanly under Visual C, so I
I had the same problem. What happened is that the latest version of ppp
now includes ppp-pam, so ppp-pam is removed when upgrading to ppp
2.3.11-1.
However, there was an entry in /var/lib/dpkg/diversions that I think was
supposed to be removed when ppp-pam was removed but wasn't. In fact I
saw an
I have EZDrive installed in order to have full access to my two 10-gig
drives. I've found a way to run Win NT without EZDrive, but I'm
wondering whether Linux (and Win 98, for that matter) needs it to
access the drives fully.
Do you know? If it's possible, how does one remove EZDrive without
Hi there,
does anybody know if there is a problem using TAR for backup if the
length of severel paths are nearly 1024 characters long?
Thanks in advance,
Uwe
I've never been able to connect to the Internet with Debian Linux,
even though I don't have that problem with Corel Linux. Another
message leads me to ask this question: Is the pam stuff needed for ppp
(pon and wvdial) to work?
If so, what do I tell apt-get in order to install what's missing? (I
On Sun, 13 Feb 2000, Eric G . Miller wrote:
On Sun, Feb 13, 2000 at 10:05:00AM +, Phillip Deackes wrote:
I used to have a Debian test-based logon screen with a red swirl logo on
the left composed of ASCII characters. I can't for the life of me
As far as I can tell, it was included with
Lane Lester said:
I have EZDrive installed in order to have full access to my two 10-gig
drives. I've found a way to run Win NT without EZDrive, but I'm
wondering whether Linux (and Win 98, for that matter) needs it to
access the drives fully.
That's a function of your BIOS more than anything
On Sun, 13 Feb 2000, Dave Sherohman wrote:
split your system up across multiple partitions anyhow. I've got a 17Gb drive
in this machine, and setting it up was a breeze, although mke2fs choked when
I tried to make a 17Gb partition, so it's set up as an 8Gb and a 9Gb
instead...)
I have a
Hello,
I am trying to install the current frozen potato 2.2.6 but I don't seem
to be able to use the floppy install.
I do not have a regular floppy on my system. I only have an LS-120 disk
drive. It boots fine from the rescue disk but then is unable to read
the root disk.
Is
On 13-Feb-2000 George Bonser wrote:
Anyone know of an irdp ( ICMP Router Discovery Protocol ) client for
Linux? It is called rdisc or in.rdisc on most systems. There was a message
posted in August 1998 on the LRP list about someone that managed to dig up
the source code. Any clues where to
Henrique M Holschuh [EMAIL PROTECTED] wrote:
apt-get source linuxlogo and a look at linuxlogo-3.0.2/debian shows a
swirl
ASCII logo, in file ascii_debian.h. Is that the logo you two are
looking
for? I must say it looks neat, will install in my system as well :-)
Yes, that's the one. Why
When balsa runs by non root user, it crashes with segmentation fault
this does not happen when root runs balsa.
I have the latest potato packages.
Thanks
Oz Dror
--
NAME Oz Dror, Los Angeles, California
EMAIL [EMAIL PROTECTED] Linux since 8/15/94
PHONE
Yes, quite right. I was not being critical of gcc, but of my own coding
orientation. I've reached similar conclusions as you outline
There is a rather large body of material I desperately need to read and
absorb. That's exactly the problem I'm trying to contend with in trying to
convert my work
On Sun, Feb 13, 2000 at 10:05, Phillip Deackes wrote:
I used to have a Debian test-based logon screen with a red swirl logo on
the left composed of ASCII characters. I can't for the life of me
remember the name of the package to re-install it. I have searched
www.debian.org with all manner of
HELP - I've royally screwed up my dselect package listing. I was working in
dselect to get rid of packages that I never use on my server (games, xemacs,
etc) and had a finger slip that removed a required package and exited to the
menu. Now almost every package is set to remove. How can I get
Le 2000-02-11 01:28:24 +0200, Shadow_OF_Darkness écrivait :
i want to get a wav to mp3 convertor ...
GOGO is a good option.
http://www.kurims.kyoto-u.ac.jp/~shigeo/gogo_e.html
It is available in RPM, and is easy to convert to
DEB.
Hope it helps.
--
Jean-Philippe Guérard
Hi Chris,
HELP - I've royally screwed up my dselect package listing. I was working in
dselect to get rid of packages that I never use on my server (games, xemacs,
etc) and had a finger slip that removed a required package and exited to the
menu. Now almost every package is set to remove.
The most recent boot-floppies build available for downloading can be
found at http://www.debian.org/~joeyh/bf/feb11/;, it is a 2.2.7 test
build and is much better than 2.2.6. In a day or two there should be an
even better 2.2.7 build available in the main ftp archive (but that
really depends on
Actually the web site is now here
http://homepage1.nifty.com/herumi/gogo_e.html
Jean-Philippe Guérard wrote:
Le 2000-02-11 01:28:24 +0200, Shadow_OF_Darkness écrivait :
i want to get a wav to mp3 convertor ...
GOGO is a good option.
http://www.kurims.kyoto-u.ac.jp/~shigeo/gogo_e.html
It
If you have only just done this, and not played with dselect since,
then a
cp /var/lib/dpkg/status{.old,}
command will set things right. It would be a good idea to look at the
status.old file first (more, less, your favorite text editor), just to
make sure it has what you want.
If you
When should we expect to have the new Debian release?
Thanks,
Antonio.
Ack, sure enough, they are status-old and status.yesterday.0,
status.yesterday.1.gz, etc.
That is what I get for going online with only 1/2 a cup of coffee in me.
--
On Sun, 13 Feb 2000, Bruce Sass wrote:
If you have only just done this, and not played with dselect since,
then a
cp
Lane writes:
I've never been able to connect to the Internet with Debian Linux, even
though I don't have that problem with Corel Linux
What have you tried? What happened? Did you run pppconfig?
Is the pam stuff needed for ppp (pon and wvdial) to work?
No.
--
John Hasler
[EMAIL PROTECTED]
Hi,
I'm still using slink, just curious if anyone has begun work packaging
some sslwrapper software (sslwrap, stunnel). I'd like to have pop-3s from
an apt-getted .deb as opposed to doing the whole search and destroy thing.
Hopefully this is already in potato?
--
Mark
This works. It REALLY slows down the performance. Is there anything else
that may help to speed it back up?
Robert
Thus spake sgaerner ([EMAIL PROTECTED]):
I had the same strange look when I used an ATI Rage 128 based
graphicsadapter. When I
switched the hardware acceleration off, the
I was =sure= I installed every library I was likely to need, but I
can't even get nedit to run. It says it's missing libm.so.5 and of
course, apt-get says there's no such package as libm.
I sometimes suspect that's one of the Linux Standards: no library file
can have a name that's even similar to
On Sun, Feb 13, 2000 at 02:14:54PM -0500, Lane Lester wrote:
I was =sure= I installed every library I was likely to need, but I
can't even get nedit to run. It says it's missing libm.so.5 and of
course, apt-get says there's no such package as libm.
I sometimes suspect that's one of the Linux
Where is accessing IOmega 100mb floppies
documented?
David
davidturetsky == davidturetsky [EMAIL PROTECTED] writes:
davidturetsky Where is accessing IOmega 100mb floppies
On my system, at /usr/share/doc/HOWTO/en-txt/mini/ZIP-Drive.txt.gz
If you didn't install the HOWTO's, you should probably try
URL:http://linuxdoc.org.
HTH,
john.
--
On Sun, Feb 13, 2000 at 06:36:01AM -0500, Tom Pfeifer wrote:
I had the same problem. What happened is that the latest version of ppp
now includes ppp-pam, so ppp-pam is removed when upgrading to ppp
2.3.11-1.
However, there was an entry in /var/lib/dpkg/diversions that I think was
supposed
Dear All,
There are plenty of tools to encode WAV - MP3.
I use bladeenc (just download and compile from its home).
Whats about back convertion (decoding). MP3-HOWTO only covers
encoding process if I am right. Is there a debiantized packages
already ?
---
Regards,
Pavel Epifanov.
[EMAIL
I recently upgraded my server to frozen, however now I cannot telnet in as
root from my local network. In my old login.access I had:
+:root:LOCAL
What is the equivalent for login-PAM?
Thanks,
Chris
mpg123 -o file.wave file.mp3
Thus spake Pavel Epifanov ([EMAIL PROTECTED]):
Dear All,
There are plenty of tools to encode WAV - MP3.
I use bladeenc (just download and compile from its home).
Whats about back convertion (decoding). MP3-HOWTO only covers
encoding process if I am right.
On Sat, 12 Feb 2000, Lane Lester wrote:
=I did a fair amount of reading and asking first, but now I've tried
=my first kernel recompile. make xconfig wouldn't work, and it seemed
=to be because it couldn't find the tk stuff. make config worked OK,
=but make dep wouldn't, and it seemed to be
On Sun, Feb 13, 2000 at 08:46:00AM -0800, Pann McCuaig was only escaped
alone to tell thee:
ftp.ourmanpann.com/pub/pann/linuxlogo_3.0-3_i386.deb
Just a reminder (no, there's nothing funny about this package). You
should think twice about installing packages that you don't get from an
Hi-
I'm attempting to install debian for the first time (i'm a long time redhat
user who recently got fucked over with some crackers and wants to try a real
distro) and I was having a bunch of questions. I've searched the faqs and
online docs but to no avail, any assistance you could offer
On Sun, Feb 13, 2000 at 02:00:32PM -0600, Chris R. Martin wrote:
I recently upgraded my server to frozen, however now I cannot telnet in as
root from my local network. In my old login.access I had:
+:root:LOCAL
Comment out the line with pam_securetty.so from /etc/pam.d/login.
--
Speaking of logons, what control character may I write in the
/etc/issue file so the screen is cleared and text writing begins in
the upper left of the vc screen? I tried Ctl-L but it didn't work;
I looked in the archives, no good, man pages getty and issue also
ng.
clear file
Ciao,
-BEGIN PGP SIGNED MESSAGE-
Actually' you'll probably want to use:
mpg123 -w file.wav file.mp3 rather than the -o switch. This will make
absolute sure it writes .wav output to the .wav file.
Jacob Schmude
[EMAIL PROTECTED]
ICQ: 53401220
email for public PGP key
On Sun, 13 Feb 2000,
A long time ago, in a galaxy far, far way, someone said...
Where is accessing IOmega 100mb floppies documented?
Probably in the ZIP-HOWTO (or something like that) at the Linux
Documentation Project and on this list - I've set up IDE and parallel port
drives under Linux.
--
Whenever I try to connect to my ISP I get:
Cannot open /dev/ttyS1 : Input/output error
How can I get this solved?
TIA-Pee
On Sun, 13 Feb 2000, Phillip Deackes wrote:
gsmh I used to have a Debian test-based logon screen with a red swirl logo on
gsmh the left composed of ASCII characters. I can't for the life of me
gsmh remember the name of the package to re-install it. I have searched
gsmh www.debian.org with all
Is anyone using Ghostscript (aladin, etc) to print to an HP printer?
Can you send me a listing of the gs packages installed and a copy of
your printcap?
Robert
:wq!
---
Robert L. Harris| Low quality in a
1 - 100 of 114 matches
Mail list logo