Dotan Cohen:
>
> A fellow student has Debian and Windows 7 on his laptop. I installed
> Windows first so that the Debian installer could configure grub
> properly, but after installing and setting up the system (which
> required a trip to the faculty technical support to set up printing
> and MatLa
Mark wrote:
>>On Thu, Dec 3, 2009 at 7:52 PM, Stefan Monnier
>>wrote: Agreed, in case you have a choice, go for
>>the SATA controller. OTOH, I use one of those frankenstein adapters in a
>>small box (wl700ge home router) where the SATA controller is not an
>>option, and it works just great for tha
Dotan Cohen wrote:
> A fellow student has Debian and Windows 7 on his laptop. I installed
> Windows first so that the Debian installer could configure grub
> properly, but after installing and setting up the system (which
> required a trip to the faculty technical support to set up printing
> and
On Sat, Dec 05, 2009 at 09:31:56PM +0200, Micha Feigin wrote:
> If you're going for a USB DAC, how about this one:
> http://www.usbdacs.com/
> :drooling: ...
I own one of those...
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact
After my problems with CUPS --- discussed in a previous thread
http://lists.debian.org/debian-user/2009/07/msg01157.html --- I
decided to move to LPRng for print job spooling.
The shift itself was easy; it didn't take more than an hour to remove
CUPS, install LPRng and configure it to work. But
Hey everyone,
I've realized that while the graphics card supports up to 1500x*, the actual
LCD screen in the laptop only supports 1024x768. A Seiko screen.
Thanks to everyone for the help!
tomislav
2009/12/5 Alexander Kaphuk
> Please see an email below for a solution to a similar problem I ha
On Monday, 07 December 2009 23:35:20 +0100,
godo wrote:
> >>does anybody have problem with 2.6.31-1-686 and eth0 (Broadcom
> >>Corporation NetLink BCM5906M)?
> >>
> >>I have up to date Sid on Lenovo ideapad S10e and approximately every
> >>20 min. eth0 break's and little Tux from kerneloops.org no
On Mon, Dec 7, 2009 at 12:42, Daniel Bareiro wrote:
> Hi Kelly.
>
> On Monday, 07 December 2009 11:57:56 -0800,
> Kelly Clowers wrote:
>
>> > After to have updated my installation of Debian GNU/Linux testing in
>> > my worstation, whenever I want start KDE with startx, the screen
>> > remains in b
2009/12/6 Paul Cartwright :
> I just got this error message back from my rkhunter cron job:
> Warning: Application 'exim', version '4.69', is out of date, and possibly a
> security risk.
> Warning: Application 'gpg', version '1.4.9', is out of date, and possibly a
> security risk.
> Warning: Applic
Problem Solved tonight by adding this on startup :
sysctl -w "net.bridge.bridge-nf-call-iptables=0"
So netfilter on dom0 is the source of the problem... But i don't know
why just on some service/websites.
--
Guillaume
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a
Daniel Bareiro wrote:
On Monday, 07 December 2009 16:53:58 +0100,
godo wrote:
Hi folks,
Hi, Goran.
does anybody have problem with 2.6.31-1-686 and eth0 (Broadcom
Corporation NetLink BCM5906M)?
I have up to date Sid on Lenovo ideapad S10e and approximately every
20 min. eth0 break's and lit
Mark wrote:
>On Thu, Dec 3, 2009 at 7:52 PM, Stefan Monnier
mailto:monn...@iro.umontreal.ca>> wrote:
>Agreed, in case you have a choice, go for the SATA controller.
>OTOH, I use one of those frankenstein adapters in a small box (wl700ge
>home router) where the SATA controller is not an optio
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 5-12-2009 14:45, Paul Cartwright wrote:
> I just got this error message back from my rkhunter cron job:
> Warning: Application 'exim', version '4.69', is out of date, and possibly a
> security risk.
> Warning: Application 'gpg', version '1.4.9', is
Hi Kelly.
On Monday, 07 December 2009 11:57:56 -0800,
Kelly Clowers wrote:
> > After to have updated my installation of Debian GNU/Linux testing in
> > my worstation, whenever I want start KDE with startx, the screen
> > remains in black.
> >
> > I've trying manually modifying the xorg.conf file
On Mon, Dec 07, 2009 at 03:13:46PM -0500, Frank McCormick wrote:
> On Mon, 07 Dec 2009 11:14:18 -0800
> Andrew Sackville-West wrote:
>
> > On Mon, Dec 07, 2009 at 07:40:53PM +0100, Nick Douma wrote:
> > > On 7-12-2009 19:33, Andrew Sackville-West wrote:
> > [... snip resolution to dns delays...]
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 7-12-2009 21:13, Frank McCormick wrote:
> On Mon, 07 Dec 2009 11:14:18 -0800
> Andrew Sackville-West wrote:
>
>> On Mon, Dec 07, 2009 at 07:40:53PM +0100, Nick Douma wrote:
>>> On 7-12-2009 19:33, Andrew Sackville-West wrote:
>> [... snip resoluti
A fellow student has Debian and Windows 7 on his laptop. I installed
Windows first so that the Debian installer could configure grub
properly, but after installing and setting up the system (which
required a trip to the faculty technical support to set up printing
and MatLab in Windows, not somethi
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Mon, 07 Dec 2009 11:14:18 -0800
Andrew Sackville-West wrote:
> On Mon, Dec 07, 2009 at 07:40:53PM +0100, Nick Douma wrote:
> > On 7-12-2009 19:33, Andrew Sackville-West wrote:
> [... snip resolution to dns delays...]
> > >>
> > >> How did you go a
Daniel Bareiro wrote:
> Hi all!
>
> After to have updated my installation of Debian GNU/Linux testing in my
> worstation, whenever I want start KDE with startx, the screen remains in
> black.
Might be worth checking if you have compositing turned on - that has the
same effect on my machine, thoug
On Mon, Dec 7, 2009 at 02:05, Daniel Bareiro wrote:
> Hi all!
>
> After to have updated my installation of Debian GNU/Linux testing in my
> worstation, whenever I want start KDE with startx, the screen remains in
> black.
>
> I've trying manually modifying the xorg.conf file and using the
> privat
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Andrew Sackville-West wrote:
> On Mon, Dec 07, 2009 at 07:40:53PM +0100, Nick Douma wrote:
>> On 7-12-2009 19:33, Andrew Sackville-West wrote:
> [... snip resolution to dns delays...]
How did you go about checking this? I use OpenDNS as dns server
On Mon, Dec 07, 2009 at 07:40:53PM +0100, Nick Douma wrote:
> On 7-12-2009 19:33, Andrew Sackville-West wrote:
[... snip resolution to dns delays...]
> >>
> >> How did you go about checking this? I use OpenDNS as dns servers and no
> >> other firewall than what comes with Debian by default.
> >
>
Dave Witbrodt:
>
> The error message is a warning: it only affects the 'hplip' package,
> and a bug report has already been filed
I had a few rules using the old syntax as well, so it pays off to look
closely what files udev complains about. I still have to test whether my
rules still work, th
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 7-12-2009 19:33, Andrew Sackville-West wrote:
> On Mon, Dec 07, 2009 at 10:41:35AM +0100, Nick Douma wrote:
>> On 7-12-2009 1:15, Andrew Sackville-West wrote:
>>> On Sun, Dec 06, 2009 at 04:08:11PM -0800, Andrew Sackville-West wrote:
On Mon, De
Often I need to make changes to Debian source files, so I was
thinking of having my own partial source mirror
I have been reading on how to do that and I have found some
inconsistencies between the German version of Debian docs (6.11.2
"Partieller Spiegel", which I read and annotated some time a
On Monday, 07 December 2009 16:53:58 +0100,
godo wrote:
> Hi folks,
Hi, Goran.
> does anybody have problem with 2.6.31-1-686 and eth0 (Broadcom
> Corporation NetLink BCM5906M)?
>
> I have up to date Sid on Lenovo ideapad S10e and approximately every
> 20 min. eth0 break's and little Tux from k
On Mon, 07 Dec 2009, Nick Douma wrote:
> > Have you ever heard of any Windows AV that filters *outgoing* email?
>
> Actually, most that I know do. At work, NOD32 integrates with Outlook
> and Thunderbird, and scans everything, even already delivered mail. I'm
> not sure if that last feature is rea
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
>>> Of course, your linux server does not need an antivirus to protect
>>> itself, but to prevent your users to be infected. And remember that by
>>> centralizing the anti-malware checking in one point (your e-mail server)
>>> you are saving not just r
On Mon, Dec 07, 2009 at 10:41:35AM +0100, Nick Douma wrote:
> On 7-12-2009 1:15, Andrew Sackville-West wrote:
> > On Sun, Dec 06, 2009 at 04:08:11PM -0800, Andrew Sackville-West wrote:
> >> On Mon, Dec 07, 2009 at 01:56:06AM +0200, Andrei Popescu wrote:
[..]
> >>>
> >>> This sounds like an ipv4/ipv
This is a general warning to those using Debian Squeeze, and Debian Sid.
Debian Etch and Debian Lenny users are NOT affected.
The IANA port allocated for ManageSieve is 4190/tcp, and the old port used
by timsieved and other managesieve software in many distros (2000/tcp) is
allocated for Cisco SC
Hi Thierry.
On Monday, 07 December 2009 12:26:23 +0100,
Thierry Chatelet wrote:
> > After to have updated my installation of Debian GNU/Linux testing in
> > my worstation, whenever I want start KDE with startx, the screen
> > remains in black.
> >
> >[.]
> maybe unrelated, I had the proble
On Mon, 07 Dec 2009, Sthu Deus wrote:
> > I think ClamAV should run as "clamav" user, not "root" and the same
> > remains for many other services that use their own user.
>
> I think the same. But! In Debian all/most the mail-related services are
> run under the root user... I was asking here how
Dear users,
I am the maintainer of the youtube-dl package and, unfortunately, due to
a decision of the release team, it won't migrate to the testing
distribution (and, as a consequence, it will not be part of a stable
release).
The package is, OTOH, quite stable, and I use it everyday, without an
Low-end HP ink-jets are problematic since the mechanism is in the cartridge.
After experimenting with hplip setup parameters to try to fix some color
problems, I cannot get back to the former, default settings. While the GUI
shows everything as default values, I am in some strange printing mode.
So after some days of research I tough the problem come from xen
I've just forgot to tell you the system was running on Xen. Really big
mistake sorry :)
I configure on my dom0 the pppoe connection and it works fine. All
wget on all websites where i have access problem works fines. It
looks l
> Should I expect it to work out of the box?
Yes, always. If something doesn't work out of the box, it's usually one
of 2 things:
- a bug in GNU/Linux
- a proprietary/crappy piece of junk
Stefan
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsu
Sthu Deus schreef:
I think ClamAV should run as "clamav" user, not "root" and the same
remains for many other services that use their own user.
I think the same. But! In Debian all/most the mail-related services are run
under the root user... I was asking here how I can change it - seems nobod
Hi folks,
does anybody have problem with 2.6.31-1-686 and eth0 (Broadcom
Corporation NetLink BCM5906M)?
I have up to date Sid on Lenovo ideapad S10e and approximately every 20
min. eth0 break's and little Tux from kerneloops.org notice me that he
will sent message about kernel problem.
WiFi
On Mon, 07 Dec 2009 22:13:17 +0700, Sthu Deus wrote:
> Thank You for Your time and answer, Camaleón:
>
>> I think ClamAV should run as "clamav" user, not "root" and the same
>> remains for many other services that use their own user.
>
> I think the same. But! In Debian all/most the mail-related
David Baron wrote:
Getting a lot of warnings about this on recent udev upgrades. I tried
substituting in some of the rules files but might have caused problems. Fact
is that this was tested with the recent broken udev and problems were (also?)
from udev itself.
Should ATTR be simply substitut
Thank You for Your time and answer, Camaleón:
> I think ClamAV should run as "clamav" user, not "root" and the same
> remains for many other services that use their own user.
I think the same. But! In Debian all/most the mail-related services are run
under the root user... I was asking here how
Getting a lot of warnings about this on recent udev upgrades. I tried
substituting in some of the rules files but might have caused problems. Fact
is that this was tested with the recent broken udev and problems were (also?)
from udev itself.
Should ATTR be simply substituted for SYSFS?
Should
On Sun, Dec 06, 2009 at 12:37:08PM -0800, Sergio Padrino wrote:
>
> Hi!
>
> I have Debian Unstable and sometimes there are some (typical) errors in my
> partitions:
>
> /dev/sda7: Superblock last mount time is in the future
> /dev/sda7: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
>
> and I was
On Tue, 20 Oct 2009, mess-mate wrote:
Hi,
suddently i get this message on startup:
udev: deprecated sysfs layout; update the kernel or disable
CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
My.config looks like: CONFIG_SYSFS_DEPRECATED=y
Must it be commented (#) or s
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
I finally did it!
Fix "Superblox last write time is in the future" error"
Open "/etc/default/rcS" and make sure the following options are set:
# Set UTC=yes if your system clock is set to UTC (GMT), and UTC=no if not.
UTC=yes
# Set FSCKFIX to "yes" if you want to add "-y" to the fsck at startup
It just happened!
It wasn't random this time as there were electrical problems in my house and
my computer shut down :-\
Here you have a picture: https://dl.dropbox.com/u/1040020/SNC00056.jpg
--
View this message in context:
http://old.nabble.com/Running-fsck-automatically-on-boot-tp26668778p2
On Mon,07.Dec.09, 07:05:19, Daniel Bareiro wrote:
> Hi all!
>
> After to have updated my installation of Debian GNU/Linux testing in my
> worstation, whenever I want start KDE with startx, the screen remains in
> black.
>
> I've trying manually modifying the xorg.conf file and using the
> privati
On Sun,06.Dec.09, 19:17:37, Celejar wrote:
>
> I keep seeing this mentioned, and I suppose I ought to finally look
> into it. I have been using vi for years, but I haven't *really* learned
> it, and I still don't feel all that comfortable with it.
When you restart iceweasel after activating it (
First, thank you for all your answers :D
My PC is dual-boot and I sometimes use Windows XP, but my sister's PC only
has Debian Unstable installed. Both PCs suffer this problem, so it seems
that it's not Windows related :-\
Klistvud wrote:
>
> Dne, 06. 12. 2009 23:02:46 je Sergio Padrino napisa
Hi,
suddently i get this message on startup:
udev: deprecated sysfs layout; update the kernel or disable
CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
My.config looks like: CONFIG_SYSFS_DEPRECATED=y
Must it be commented (#) or setted to "n" ?
B.R.
Hi all!
After to have updated my installation of Debian GNU/Linux testing in my
worstation, whenever I want start KDE with startx, the screen remains in
black.
I've trying manually modifying the xorg.conf file and using the
privative driver of nvidia and I even reach the same result.
This is my
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 7-12-2009 1:15, Andrew Sackville-West wrote:
> On Sun, Dec 06, 2009 at 04:08:11PM -0800, Andrew Sackville-West wrote:
>> On Mon, Dec 07, 2009 at 01:56:06AM +0200, Andrei Popescu wrote:
>>> On Sun,06.Dec.09, 15:39:59, Andrew Sackville-West wrote:
>>>
Try to use lenny-backports repository. I had that problem some days ago.
Naumov Sergey
kom...@uvt.cz пишет:
Hi
I have installed stable and i have to change to testing but i always get
this error
sysresccd:/# aptitude install mysql-server
Reading package lists... Done
Building dependency tree
R
Hi All
I have a x86 Lenny servers and amd64 Etch servers. I am setting up
SNMP V3 on those servers I did run the following command on all
servers:
/etc/init.d/snmpd stop;net-snmp-config --create-snmpv3-user -ro -a MD5
-A XYZ ZXY;/etc/init.d/snmpd restart
Then I run the following test:
snmpget
55 matches
Mail list logo
