On Thu, 25 Mar 2021 12:05:19 +0800
Jeremy Ardley wrote:
> lsusb
...
> Bus 001 Device 006: ID 0a12:0001 Cambridge Silicon Radio, Ltd
> Bluetooth Dongle (HCI mode)
It doesn't hurt to search on the word Linux and the USB ID:
https://duckduckgo.com/?q=linux+0a12:0001
That should give you some
On Wed, 24 Mar 2021 22:52:31 -0500
David Wright wrote:
> ... [W]e haven't yet been shown any direct evidence of
> which module drives the 8723, nor of what firmware it uses.
> (These can easily be determined from dmesg when the installed
> system is running.)
Also, more detail from
I've just got a new bluetooth dongle that says V5.0 on the case. I think
it uses Cambridge Silicon Radio
lsusb
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 0c45:6340 Microdia Camera
Bus 003 Device 002: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial
On Wed 24 Mar 2021 at 17:58:58 (-0400), Cmdte Alpha Tigre Z wrote:
>
> I saw the bug report. Mr. Charles Curley provided relevant information
> about the installation process stored on log files. Perhaps it would be good
> to follow Mr. David Wright's advice, you could help with bug-fixing
El jue, 25 de mar. de 2021 a la(s) 00:21, Ignacio Martirén (
simarti...@gmail.com) escribió:
> Hola lista. Soy usuario Debian, ahora en Buster, tengo que instalar una
> placa de red por USB en una compu de escritorio. El elemento que quiero
> comprar es este
>
>
>
Hola lista. Soy usuario Debian, ahora en Buster, tengo que instalar una
placa de red por USB en una compu de escritorio. El elemento que quiero
comprar es este
https://www.venex.com.ar/componentes-de-pc/placas-de-red/tp-link-tl-wn822n.html
que es 3.0 pero mi maquina es vieja y los puerto USB son
On 3/24/21 2:14 PM, Dominic Knight wrote:
On Tue, 2021-03-23 at 09:26 -0500, Richard Owlett wrote:
I've been use MATE almost since it came out.
IIRC I used to use a series of mouse clicks to determine the file
name
{including path} of the current icon.
On my current systems {one Stretch, one
On 3/24/21 2:44 PM, Charlie Gibbs wrote:
$ cat /etc/debian_version
10.8
Okay -- that is current.
$ uname -a
Linux cjglap2 4.19.0-14-amd64 #1 SMP Debian 4.19.171-2 (2021-01-30)
x86_64 GNU/Linux
Okay -- that is current.
$ nmcli g status
STATE CONNECTIVITY WIFI-HW WIFI
>
> learning by doing
Theory and practice are both important. It is crucial to understand how IP
networks work, so I'd start with book like "TCP/IP Network Administration"
> During installation
> server software was installed on *ONE* of them. Communication will be
> via WiFi.
Did they get IP
Bonjour,
Comme indiqué de manière très détaillée sur
https://mywiki.wooledge.org/BashFAQ/050 (désolé c'est en anglais), stocker des
commandes dans des variables est très hasardeux.
La façon la moins risquée est de passer par un tableau (d'ailleurs t'avais
évoqué l'idée dans ton message
On Wed, Mar 24, 2021 at 02:44:37PM -0700, Charlie Gibbs wrote:
> I tried removing the 192.168.0.1 line along with the "search telus"
> line. I didn't notice any difference, but could this be because
> this stuff is buffered somewhere? Perhaps I need to kick something
> to make sure the new file
On Wed 24 Mar 2021 at 17:49:11 (-0400), Cmdte Alpha Tigre Z wrote:
> El mié, 24 mar 2021 a las 16:42, Brian () escribió:
> > On Wed 24 Mar 2021 at 20:20:59 +, Joe wrote:
> > > On Wed, 24 Mar 2021 15:08:43 -0500 David Wright wrote:
> > > >
> > > > A new N600 dual band router can be had for $30
> I want to indent when printing a ps file.
> For a text file, it's easy with the "lpr -o page-left option, but
> it doesn't for a ps file. Google didn't help for that.
You can use the command pstops to print a PostScript file with
space added to one margin and subtracted from the opposite
On Wed, 24 Mar 2021 17:13:20 -0400
Cmdte Alpha Tigre Z wrote:
> El mié, 24 mar 2021 a las 10:45, Andrei POPESCU
> () escribió:
> >
> > On Mi, 24 mar 21, 10:34:54, to...@tuxteam.de wrote:
> > > On Wed, Mar 24, 2021 at 09:24:28AM +, Darac Marjal wrote:
> > > >
> > > > On 24/03/2021 05:32,
On 24/03/2021 12:57, Greg Wooledge wrote:
On Wed, Mar 24, 2021 at 12:20:23PM +, pioruns2019 wrote:
You can use DNS Benchmark by Steve Gibson, written like 20 years ago in
assembly language. This will test your various DNS configurations and
diagnose them:
Or, you could simply run
dig
Further to my 20-30 second delay when firing up slrnpull:
Here are some of your responses and my replies:
On Wed Mar 24 13:08:20 2021 wrote:
> On Tue, Mar 23, 2021 at 10:32:27PM -0700, Charlie Gibbs wrote:
>> [contents of /etc/resolv.conf -> /run/NetworkManager/resolv.conf]
>> # Generated by
Hi.
I saw the bug report. Mr. Charles Curley provided relevant information
about the installation process stored on log files. Perhaps it would be good
to follow Mr. David Wright's advice, you could help with bug-fixing process
sending some installation log information to narrow what the
El mié, 24 mar 2021 a las 16:42, Brian () escribió:
>
> On Wed 24 Mar 2021 at 20:20:59 +, Joe wrote:
>
> > On Wed, 24 Mar 2021 15:08:43 -0500
> > David Wright wrote:
> >
> >
> > >
> > > A new N600 dual band router can be had for $30 at Walmart.
> > > I don't know how easy it is to initially
On 24/3/21 12:17, Camaleón wrote:
El 2021-03-24 a las 11:51 -0300, Marcelo Eduardo Giordano escribió:
On 24/3/21 11:33, Camaleón wrote:
(...)
2. Revisa los registros que genera Wine por si tuvieras más datos del
error cuando intentas imprimir.
¿Donde se miran los registros de wine?
On Tue, 2021-03-23 at 09:26 -0500, Richard Owlett wrote:
> I've been use MATE almost since it came out.
> IIRC I used to use a series of mouse clicks to determine the file
> name
> {including path} of the current icon.
>
> On my current systems {one Stretch, one Buster} if I:
I am using Bullseye
El mié, 24 mar 2021 a las 10:45, Andrei POPESCU
() escribió:
>
> On Mi, 24 mar 21, 10:34:54, to...@tuxteam.de wrote:
> > On Wed, Mar 24, 2021 at 09:24:28AM +, Darac Marjal wrote:
> > >
> > > On 24/03/2021 05:32, Charlie Gibbs wrote:
> >
> > [...]
> >
> > > > # Generated by NetworkManager
> > >
Hey there,
Hope you received my below email.
Shall I send you count and cost for the list.
Best Regards,
Nora Lawrence-Marketing Executive
From: Nora Lawrence
Sent: Tuesday, March 23, 2021 12:15 PM
To: debian-user@lists.debian.org
Subject: Discover who your competitors are - Vision Expo East
On Wed 24 Mar 2021 at 20:20:59 +, Joe wrote:
> On Wed, 24 Mar 2021 15:08:43 -0500
> David Wright wrote:
>
>
> >
> > A new N600 dual band router can be had for $30 at Walmart.
> > I don't know how easy it is to initially configure it without
> > an ethernet connection to one of the LAN
On 3/23/21 10:32 PM, Charlie Gibbs wrote:
I read Usenet (including this mailing list via the newsgroup
linux.debian.user) on my laptop. so I can keep up from anywhere.
It works well, but at home it takes 20 or 30 seconds to connect
to my NNTP server, newsguy.com. If I take my laptop to the
On Wed, 24 Mar 2021 15:08:43 -0500
David Wright wrote:
>
> A new N600 dual band router can be had for $30 at Walmart.
> I don't know how easy it is to initially configure it without
> an ethernet connection to one of the LAN ports, but that problem
> can be considered solved by the quotation
On Wed 24 Mar 2021 at 20:06:37 (+0100), basti wrote:
> Am 24.03.21 um 19:38 schrieb Brian:
> > On Wed 24 Mar 2021 at 12:05:38 -0500, Richard Owlett wrote:
> >> On 03/24/2021 11:37 AM, Andrew M.A. Cater wrote:
> >>> On Wed, Mar 24, 2021 at 10:34:53AM -0500, Richard Owlett wrote:
> This is
On Wed, Mar 24, 2021 at 07:20:33PM +0100, Pierre Frenkiel wrote:
> hi,
> I'm fighting with the following stupid problem:
> I want to indent when printing a ps file.
> For a text file, it's easy with the "lpr -o page-left option, but
> it doesn't for a ps file. Google didn't help for that.
> Has
Am 24.03.21 um 19:38 schrieb Brian:
> On Wed 24 Mar 2021 at 12:05:38 -0500, Richard Owlett wrote:
>
>> On 03/24/2021 11:37 AM, Andrew M.A. Cater wrote:
>>> On Wed, Mar 24, 2021 at 10:34:53AM -0500, Richard Owlett wrote:
This is essentially a reading list request.
I have never
On Wed, Mar 24, 2021 at 07:20:33PM +0100, Pierre Frenkiel wrote:
> hi,
> I'm fighting with the following stupid problem:
> I want to indent when printing a ps file.
> For a text file, it's easy with the "lpr -o page-left option, but
> it doesn't for a ps file. Google didn't help for that.
> Has
On 3/24/21 8:20 PM, Pierre Frenkiel wrote:
> hi,
> I'm fighting with the following stupid problem:
> I want to indent when printing a ps file.
> For a text file, it's easy with the "lpr -o page-left option, but
> it doesn't for a ps file. Google didn't help for that.
> Has anybody a solution?
>
>
On Wed 24 Mar 2021 at 12:05:38 -0500, Richard Owlett wrote:
> On 03/24/2021 11:37 AM, Andrew M.A. Cater wrote:
> > On Wed, Mar 24, 2021 at 10:34:53AM -0500, Richard Owlett wrote:
> > > This is essentially a reading list request.
> > > I have never administered a LAN and believe in "learning by
On Wed, 24 Mar 2021 16:56:46 +0100
Sjoerd wrote:
> > Inderdaad, ik zie het. Ik word naar een duitstalige Ubuntusite
> > gestuurd trouwens.
>
> Bij nader inzien, dat 'temporarily offline' duurt nu al twee jaar.
> Dus dat zie ik een beetje somber in.
Ja, want op zich werkt xsane uitstekend. Maar
hi,
I'm fighting with the following stupid problem:
I want to indent when printing a ps file.
For a text file, it's easy with the "lpr -o page-left option, but
it doesn't for a ps file. Google didn't help for that.
Has anybody a solution?
best regards,
--
Pierre Frenkiel
On 03/24/2021 12:22 PM, Reco wrote:
On Wed, Mar 24, 2021 at 12:15:34PM -0500, Richard Owlett wrote:
On 03/24/2021 10:40 AM, Reco wrote:
On Wed, Mar 24, 2021 at 10:34:53AM -0500, Richard Owlett wrote:
I have two laptops with clean installs of Buster. During installation
server software was
On 03/24/2021 10:57 AM, Charles Curley wrote:
On Wed, 24 Mar 2021 10:34:53 -0500
Richard Owlett wrote:
I have never administered a LAN and believe in "learning by doing".
You will. :-)
I have two laptops with clean installs of Buster. During installation
server software was installed on
On Wed, Mar 24, 2021 at 05:17:57PM +, David Pottage wrote:
> On 2021-03-24 12:37, Reco wrote:
> > Hi.
> >
> > On Wed, Mar 24, 2021 at 10:26:49AM +, David Pottage wrote:
> > > Is there a way to assemble the VG and mount those ext4 filesystems in
> > > such a way that read attempts from the
On Wed, Mar 24, 2021 at 12:15:34PM -0500, Richard Owlett wrote:
> On 03/24/2021 10:40 AM, Reco wrote:
> > On Wed, Mar 24, 2021 at 10:34:53AM -0500, Richard Owlett wrote:
> > > I have two laptops with clean installs of Buster. During installation
> > > server software was installed on *ONE* of
On 2021-03-24 12:37, Reco wrote:
Hi.
On Wed, Mar 24, 2021 at 10:26:49AM +, David Pottage wrote:
Is there a way to assemble the VG and mount those ext4 filesystems in
such a way that read attempts from the missing PV will return zeros,
but the rest of the filesystem will work?
Try this:
On 03/24/2021 10:40 AM, Reco wrote:
Hi.
On Wed, Mar 24, 2021 at 10:34:53AM -0500, Richard Owlett wrote:
I have two laptops with clean installs of Buster. During installation
server software was installed on *ONE* of them. Communication will be
via WiFi. Any specific suggestions for
On 03/24/2021 11:37 AM, Andrew M.A. Cater wrote:
On Wed, Mar 24, 2021 at 10:34:53AM -0500, Richard Owlett wrote:
This is essentially a reading list request.
I have never administered a LAN and believe in "learning by doing".
I have two laptops with clean installs of Buster. During installation
On Wed, Mar 24, 2021 at 10:34:53AM -0500, Richard Owlett wrote:
> This is essentially a reading list request.
> I have never administered a LAN and believe in "learning by doing".
> I have two laptops with clean installs of Buster. During installation server
> software was installed on *ONE* of
Richard Lucassen:
> Sjoerd:
> > Richard Lucassen:
> > > Zijn er vergelijkbare progs als xsane?
> >
> > Nou, hier op de site van Sane: http://sane-project.org/sane-frontends.html
> > zie je dat de site van XSane alleen maar 'temporarily' offline is.
>
> Inderdaad, ik zie het. Ik word naar een
On Wed, 24 Mar 2021 10:34:53 -0500
Richard Owlett wrote:
> I have never administered a LAN and believe in "learning by doing".
You will. :-)
> I have two laptops with clean installs of Buster. During installation
> server software was installed on *ONE* of them. Communication will be
> via
On Wed, 24 Mar 2021 14:36:37 +0100
Sjoerd wrote:
> > Zijn er vergelijkbare progs als xsane?
>
> Nou, hier op de site van Sane:
> http://sane-project.org/sane-frontends.html zie je dat de site van
> XSane alleen maar 'temporarily' offline is.
Inderdaad, ik zie het. Ik word naar een duitstalige
Hi.
On Wed, Mar 24, 2021 at 10:34:53AM -0500, Richard Owlett wrote:
> I have two laptops with clean installs of Buster. During installation
> server software was installed on *ONE* of them. Communication will be
> via WiFi. Any specific suggestions for reading?
hostapd, dhcpd, bind
This is essentially a reading list request.
I have never administered a LAN and believe in "learning by doing".
I have two laptops with clean installs of Buster. During installation
server software was installed on *ONE* of them. Communication will be
via WiFi. The MATE panel's network
El 2021-03-24 a las 11:51 -0300, Marcelo Eduardo Giordano escribió:
> On 24/3/21 11:33, Camaleón wrote:
(...)
> > 2. Revisa los registros que genera Wine por si tuvieras más datos del
> > error cuando intentas imprimir.
> ¿Donde se miran los registros de wine? porque quise ejecutarlo desde la
Bonjour,
Merci pour cette réponse très détaillée ! Je comprends mieux maintenant
pourquoi il n'a pas été inclus.
Bonne journée,
Le lun. 22 mars 2021, à 16 h 40, Étienne Mollier
a écrit :
> Louis-Philippe, on 2021-03-22 09:03:06 -0400:
> > Je m'inquiète pour le paquet PHP8 qui est encore et
Dan Ritter wrote:
...
> Next time: verify that you are backing up everything that you
> need to backup. I know it's boring.
it seems like it should be common sense for anyone worried
about redundancy to the extent of having raid to also think
about making sure there is more than one
On 24/3/21 11:33, Camaleón wrote:
El 2021-03-24 a las 07:59 -0300, Marcelo Eduardo Giordano escribió:
Les comento que en Argentina los contadores usamos un sofware llamado Siap
que sirve para las presentaciones ante el fisco. Lamentablemente dicho
software está muy olvidado, hace tiempo que
Hola,
Estoy buscando la forma de activar / desactivar la funcionalidad de la
BIOS WOR (Wake-On-Ring) pero desde el sistema, es decir, algo similar a
lo que permite la herramienta ethtool¹ («ethtool -s wol d») pero para el
puerto RS-232.
Con la BIOS actual WOR se encuentra habilitado y
On 24/3/21 11:31, JavierDebian wrote:
El 24/3/21 a las 07:51, Marcelo Eduardo Giordano escribió:
Hola amigo. Perdonen que toque de nuevo este tema que ya toqué en
otro hilo, pero esta vez tengo otras dudas.
Tengo una máquina nueva para instalar debian y debido a que
seguramente en
On Mi, 24 mar 21, 10:34:54, to...@tuxteam.de wrote:
> On Wed, Mar 24, 2021 at 09:24:28AM +, Darac Marjal wrote:
> >
> > On 24/03/2021 05:32, Charlie Gibbs wrote:
>
> [...]
>
> > > # Generated by NetworkManager
> > > search telus
> > > nameserver 192.168.0.1
> > > nameserver 75.153.171.122
>
lo que hice fue instarlar virtualbox y windows xp o windows 7 solo
para eso
fue y es la mejor solucion hay una empresa que usa una app de la
provincia de Entre Rios... y no hubo forma de que funcione.
por eso opte por lo que comente..
Si no logro solucionarlo voy a intentar esa
El 2021-03-24 a las 07:59 -0300, Marcelo Eduardo Giordano escribió:
> Les comento que en Argentina los contadores usamos un sofware llamado Siap
> que sirve para las presentaciones ante el fisco. Lamentablemente dicho
> software está muy olvidado, hace tiempo que no actualizan y no tiene versión
El 24/3/21 a las 07:51, Marcelo Eduardo Giordano escribió:
Hola amigo. Perdonen que toque de nuevo este tema que ya toqué en otro
hilo, pero esta vez tengo otras dudas.
Tengo una máquina nueva para instalar debian y debido a que seguramente
en cualquier momento sale debian 11, quería
Bonjour
Le 24/03/2021 à 14:59, Olivier a écrit :
Bonjour,
En installant Bind9 sur une machine, j'ai lu plusieurs références à
DNSSEC, sujet que je connais très mal.
1. Par défaut, une machine Debian sous Buster ou Bullseye, est-elle
configurée pour utiliser DNSSEC plutôt que DNS ?
Non.
Le mercredi 24 mars 2021 à 14:41 +0100, Olivier a écrit :
Bonjour,
> J'ai aussi essayé, sans plus de succès, avec:
>
> zone "foo.lan" {
> type master;
> forwarders { 192.168.1.1; }; # Adresse du serveur DNS sur foo.lan
> };
>
> zone "bar.lan" {
> type master;
> file
Bonjour,
j'utilisais ifup down jusque là, mais avec network-manager est-ce identique.
Je vais creuser
Le mar. 23 mars 2021 à 11:07, Erwann Le Bras a
écrit :
> bonjour
>
> je suis perplexe : un tel script n'est pas difficile à faire.
>
> En fait, ça réinitialise toutes les connexions en
On Tue, Mar 23, 2021 at 04:04:29PM -0700, David Christensen wrote:
> On 3/23/21 12:31 PM, Andrew M.A. Cater wrote:
> > On Tue, Mar 23, 2021 at 10:40:01AM -0700, David Christensen wrote:
>
> > > I use Stretch for my daily driver laptop (Dell Latitude E6520) and UniFi
> > > Controller VPS. ...
> >
Bonjour,
En installant Bind9 sur une machine, j'ai lu plusieurs références à DNSSEC,
sujet que je connais très mal.
1. Par défaut, une machine Debian sous Buster ou Bullseye, est-elle
configurée pour utiliser DNSSEC plutôt que DNS ?
2. Qu'implique en terme d'administration, l'utilisation de
Marcelo Eduardo Giordano:
Hola estimados:
Les comento que en Argentina los contadores usamos un sofware llamado
Siap que sirve para las presentaciones ante el fisco. Lamentablemente
dicho software está muy olvidado, hace tiempo que no actualizan y no
tiene versión de linux.
Probé de
J'ai aussi essayé, sans plus de succès, avec:
zone "foo.lan" {
type master;
forwarders { 192.168.1.1; }; # Adresse du serveur DNS sur foo.lan
};
zone "bar.lan" {
type master;
file "/etc/bind/db.bar.lan";
};
À noter que sur le PC émettant les requêtes DNS, resolv.conf vaut:
Richard Lucassen vroeg:
> Zijn er vergelijkbare progs als xsane?
Nou, hier op de site van Sane: http://sane-project.org/sane-frontends.html
zie je dat de site van XSane alleen maar 'temporarily' offline is.
Bovendien zie je hier tal van andere frontends voor Sane, van Kooka tot
SimpleScan.
On Wed, Mar 24, 2021 at 10:00:37AM -0300, Marcelo Eduardo Giordano wrote:
> Roberto:
>
> Gracias por responder.
>
De nada.
> Entonces los repositorios un ejemplo de repositorio seria asi:
>
> deb http://deb.debian.org/debian bullseye main contrib non-free
>
> De esa manera entiendo que cuando
On 24/3/21 08:39, Roberto C. Sánchez wrote:
On Wed, Mar 24, 2021 at 07:51:06AM -0300, Marcelo Eduardo Giordano wrote:
Hola amigo. Perdonen que toque de nuevo este tema que ya toqué en otro hilo,
pero esta vez tengo otras dudas.
Tengo una máquina nueva para instalar debian y debido a que
On Wed, Mar 24, 2021 at 12:20:23PM +, pioruns2019 wrote:
> You can use DNS Benchmark by Steve Gibson, written like 20 years ago in
> assembly language. This will test your various DNS configurations and
> diagnose them:
>
> https://www.grc.com/dns/benchmark.htm
>
> Use Wine to run it.
>
>
Bonjour,
Je souhaite mettre en place un serveur Bind9 avec les points suivants:
La machine qui héberge Bind9 est sous Buster.
Elle possède deux interfaces Ethernet, chacune connectée à un réseau local
(foo.lan et bar.lan).
Elle est client DHCP sur un réseau local (foo.lan), et fait office de
David Pottage wrote:
> At work, there is a fileserver with a failed external drive enclosure. I am
> attempting to recover some data that is probably not on the failed drives.
>
> This file server started out with 36 internal drives (in three RAID-6
> arrays) that formed the initial 3 physical
Hi.
On Wed, Mar 24, 2021 at 10:26:49AM +, David Pottage wrote:
> Is there a way to assemble the VG and mount those ext4 filesystems in
> such a way that read attempts from the missing PV will return zeros,
> but the rest of the filesystem will work?
Try this:
vgchange
You can use DNS Benchmark by Steve Gibson, written like 20 years ago in
assembly language. This will test your various DNS configurations and
diagnose them:
https://www.grc.com/dns/benchmark.htm
Use Wine to run it.
wine DNSBench.exe
It will tell you what's wrong, if anything, with your DNS
On Wed, Mar 24, 2021 at 07:51:06AM -0300, Marcelo Eduardo Giordano wrote:
> Hola amigo. Perdonen que toque de nuevo este tema que ya toqué en otro hilo,
> pero esta vez tengo otras dudas.
>
> Tengo una máquina nueva para instalar debian y debido a que seguramente en
> cualquier momento sale
Ik zag dat xsane verdwijnt uit Bullseye:
xsane (0.999-7) unstable; urgency=medium
Upstream stopped working on xsane some time ago. Now the homepage and
the archive are offline, too.
If the situation doesn't change, xsane will be removed before Bullseye
is released.
-- Jörg
Hola estimados:
Les comento que en Argentina los contadores usamos un sofware llamado
Siap que sirve para las presentaciones ante el fisco. Lamentablemente
dicho software está muy olvidado, hace tiempo que no actualizan y no
tiene versión de linux.
Probé de instalarlo en wine (era la
Victor Sudakov wrote:
> Dan Ritter wrote:
> > Here's a typical non-libvirtd qemu/kvm invocation:
> >
> > cd /var/spool/kvm
> > export VNAME=virtualmachinename
> > export CPUS=2
> > export RAM=4096
> > export MAC=00:15:f1:c1:a2:01
> > export VNC=:1
> > export
Hola amigo. Perdonen que toque de nuevo este tema que ya toqué en otro
hilo, pero esta vez tengo otras dudas.
Tengo una máquina nueva para instalar debian y debido a que seguramente
en cualquier momento sale debian 11, quería instalarlo en su sistema
operativo, para evitar dentro de poco
Hello,
At work, there is a fileserver with a failed external drive enclosure. I
am attempting to recover some data that is probably not on the failed
drives.
This file server started out with 36 internal drives (in three RAID-6
arrays) that formed the initial 3 physical volumes to an LVM
On Wed, Mar 24, 2021 at 09:24:28AM +, Darac Marjal wrote:
>
> On 24/03/2021 05:32, Charlie Gibbs wrote:
[...]
> > # Generated by NetworkManager
> > search telus
> > nameserver 192.168.0.1
> > nameserver 75.153.171.122
> > nameserver 2001:568:ff09:10a::56
> > # NOTE: the libc resolver may
On 24/03/2021 05:32, Charlie Gibbs wrote:
> I read Usenet (including this mailing list via the newsgroup
> linux.debian.user) on my laptop. so I can keep up from anywhere.
> It works well, but at home it takes 20 or 30 seconds to connect
> to my NNTP server, newsguy.com. If I take my laptop to
On 3/24/2021 9:55 AM, didier gaumet wrote:
Le 24/03/2021 à 03:12, Victor Sudakov a écrit :
The relation between qemu and kvm confuses me. "apt install qemu-kvm" is
trying to install a ton of X11 packages including Mesa drivers etc, I
would not really want that. And "apt install kvm" does not
On Mi, 24 mar 21, 09:22:32, Victor Sudakov wrote:
>
> Do you think I can install qemu-kvm without installing the 230 X11
> packages is requires?
It is possible.
It should be relatively easy to do so if some packages are only
recommended instead of depended on.
Does 'apt install
Le 24/03/2021 à 03:12, Victor Sudakov a écrit :
The relation between qemu and kvm confuses me. "apt install qemu-kvm" is
trying to install a ton of X11 packages including Mesa drivers etc, I
would not really want that. And "apt install kvm" does not find such a
package.
QEMU/KVM relationship:
On Ma, 23 mar 21, 11:45:05, David Wright wrote:
>
> If I search on https://packages.debian.org/index for
> linux-image-5.10.0-0.bpo. in buster-backports/any,
> then I see the same six matches for
> linux-image-5.10.0-0.bpo.4…amd64, where, as before,
> "…" stands for cloud, rt, and nothing.
>
>
On Tue, Mar 23, 2021 at 10:32:27PM -0700, Charlie Gibbs wrote:
> I read Usenet (including this mailing list via the newsgroup
> linux.debian.user) on my laptop. so I can keep up from anywhere.
> It works well, but at home it takes 20 or 30 seconds to connect
> to my NNTP server, newsguy.com. If I
On 3/24/2021 6:32 AM, Charlie Gibbs wrote:
I read Usenet (including this mailing list via the newsgroup
linux.debian.user) on my laptop. so I can keep up from anywhere.
It works well, but at home it takes 20 or 30 seconds to connect
to my NNTP server, newsguy.com. If I take my laptop to the
El 2021-03-23 a las 20:41 -0300, Marcelo Eduardo Giordano escribió:
> Les cuento que me compré una impresora Xerox B215 especialmente porque en el
> manual venía bien explicado la instalación en linux que seguí que es esta.
(...)
> Y aunque se instalaron los dos controladores (impresora y
86 matches
Mail list logo
