set up the
system chose the automatic rather than the manual method for package
installation. I find it hard to believe that this was the cause but so be
it.
Thanks for your time on this,
Carlo
On Thu, 20 Feb 2003, Joey Hess wrote:
Carlo U. Segre wrote:
whiptail: error while loading shared
-reconfigure --priority low debconf
Actually, I am not in front of a debian box now, perhaps low should be in
quotes.
I believe there is also an environment variable you can set to do the same
thing.
hth,
-Josh
-Original Message-
From: Carlo U. Segre [mailto:[EMAIL PROTECTED
to uninstall debconf (using --force-depends)
and then reinstalling it to no avail.
Help!
Carlo
--
Carlo U. Segre -- Professor of Physics
Associate Dean for Research, Armour College
Illinois Institute of Technology
Voice: 312.567.3498Fax: 312.567.3494
[EMAIL PROTECTED]http
machine. The compilation
works but the executable does not.
Any ideas?
Carlo
--
Carlo U. Segre -- Professor of Physics
Illinois Institute of Technology
Voice: 312.567.3498Fax: 312.567.3494
[EMAIL PROTECTED]http://www.iit.edu/~segre
on or how to figure out which package might be responsible?
Cheers,
Carlo
--
Carlo U. Segre -- Professor of Physics
Illinois Institute of Technology
Voice: 312.567.3498Fax: 312.567.3494
[EMAIL PROTECTED]http://www.iit.edu/~segre
really simple thing that I am not doing
right, any suggestions?
Cheers,
Carlo
--
Carlo U. Segre -- Professor of Physics
Illinois Institute of Technology
Voice: 312.567.3498Fax: 312.567.3494
[EMAIL PROTECTED]http://www.iit.edu/~segre
.
Cheers,
Carlo Segre
--
Carlo U. Segre -- Professor of Physics
Illinois Institute of Technology
Voice: 312.567.3498Fax: 312.567.3494
[EMAIL PROTECTED]http://www.iit.edu/~segre
1024x768 (this appears to be for a different card) --
Section InputDevice
Identifier
of the best document
editors around, I was wondering if anyone else had worked around this
problem. libforms0.89-bin and libforms0.89-dev are both listed in the
online list of packages, but just plain libforms0.89 is missing. I
cannot apt-get install any of the 3. Suggestions?
--
Carlo U
it. Any suggestions?
Cheers,
Carlo
--
Carlo U. Segre -- Associate Professor of Physics
Illinois Institute of Technology
Voice: 312.567.3498Fax: 312.567.3494
[EMAIL PROTECTED]http://www.iit.edu/~segre
devsel. Fast back-to-back capable. IRQ 11. Master Capable.
Latency=64. Min Gnt=8.
Prefetchable 32 bit memory at 0xe000 [0xe008].
I/O at 0xac00 [0xac01].
Non-prefetchable 32 bit memory at 0xefefc000 [0xefefc000].
--
Carlo U. Segre -- Associate Professor
.
Prefetchable 32 bit memory at 0xe000 [0xe008].
I/O at 0xac00 [0xac01].
Non-prefetchable 32 bit memory at 0xefefc000 [0xefefc000].
--
Carlo U. Segre -- Associate Professor of Physics
Illinois Institute of Technology
Voice: 312.567.3498Fax: 312.567.3494
[EMAIL
it from server
read
sdb.suse.de/sdb/de/html/cg_rage128_63.html
vale
On Mit, 12 Jul 2000, Carlo U. Segre wrote:
Hello All:
Has anyone found a working driver for an ATI Rage 128 Pro AGP card?
I have tried the SVGA and it does not recognize the card, but tries to
operate it and I get a blank
systems but not
others, however, I am at a loss. I am typically getting the problem on
systems which have a relatively fresh frozen installation.
Any ideas?
Carlo
--
Carlo U. Segre -- Associate Professor of Physics
Illinois Institute of Technology
Voice: 312.567.3498Fax: 312.567.3494
or disable various devices but if anyone has come
across this situation and solved, I would most appreciate the insight.
Cheers,
Carlo
--
Carlo U. Segre -- Associate Professor of Physics
Illinois Institute of Technology
Voice: 312.567.3498Fax: 312.567.3494
[EMAIL PROTECTED]http
---
Carlo U. Segre
Associate Professor of Physics
Illinois Institute of Technology
Chicago, IL 60616
Voice:(312) 567-3498
FAX: (312) 567-3494
http://www.iit.edu/~segre
[EMAIL PROTECTED]
to go back to the S3
Virge PCI (no AGP) cards which do work with both the xserver-s3v and
xserver-svga packages (the latter will permit you to install Staroffice
5.0, the former will not).
Cheers,
Carlo
---
Carlo U. Segre
Associate Professor of Physics
Illinois
---
Carlo U. Segre
Associate Professor of Physics
Illinois Institute of Technology
Chicago, IL 60616
Voice:(312) 567-3498
FAX: (312) 567-3494
http://www.iit.edu/~segre
[EMAIL PROTECTED]
---
Carlo U. Segre
Associate Professor of Physics
Illinois Institute of Technology
Chicago, IL 60616
Voice:(312) 567-3498
FAX: (312) 567-3494
http://www.iit.edu/~segre
[EMAIL PROTECTED]
. This same message shows up when I log into
an Irix system and a Solaris system but in the Irix case, pine will
continue to work and in the Solaris case, I am able to use the set term
command to fix the problem.
Is this a bug in the xterm setup?
Cheers,
Carlo
---
Carlo U
On Sat, 18 Jul 1998 [EMAIL PROTECTED] wrote:
I am not using hamm, but is the wrapper /usr/X11R6/bin/X suid root?
yes it is.
Carlo
---
Carlo U. Segre
Associate Professor of Physics
Illinois Institute of Technology
Chicago, IL 60616
Voice:(312) 567-3498
FAX
On Thu, 16 Jul 1998, Michael B. Taylor wrote:
On Thu, Jul 16, 1998 at 04:16:08PM -0500, Carlo U. Segre wrote:
I have been trying to install a new machine with the frozen hamm
distribution and I am running into 2 problems with X11.
1. No user outside root is allowed to start X11
---
Carlo U. Segre
Associate Professor of Physics
Illinois Institute of Technology
Chicago, IL 60616
Voice:(312) 567-3498
FAX: (312) 567-3494
http://www.iit.edu/~segre
[EMAIL PROTECTED]
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
---
Carlo U. Segre
Associate Professor of Physics
Illinois Institute of Technology
Chicago, IL 60616
Voice:(312) 567-3498
FAX: (312) 567-3494
http://www.iit.edu/~segre
[EMAIL PROTECTED]
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
---
Carlo U. Segre
Associate Professor of Physics
Illinois Institute of Technology
Chicago, IL 60616
Voice:(312) 567-3498
FAX: (312) 567-3494
http://www.iit.edu/~segre
[EMAIL PROTECTED]
--
E-mail the word unsubscribe to [EMAIL PROTECTED]
TO UNSUBSCRIBE FROM THIS MAILING LIST
and
serve it to the rest of the network. I have done this with a
non-Jetdirect HP LaserJet but I much prefer the jetdirect solution.
Good Luck,
Carlo
---
Carlo U. Segre
Associate Professor of Physics
Illinois Institute of Technology
Chicago, IL 60616
Voice:(312) 567
files, not just the configuration files
in /etc.
Carlo
---
Carlo U. Segre
Associate Professor of Physics
Illinois Institute of Technology
Chicago, IL 60616
Voice:(312) 567-3498
FAX: (312) 567-3494
http://www.iit.edu/~segre
[EMAIL PROTECTED]
--
TO UNSUBSCRIBE
). Overall, however, I like it quite well.
Carlo
---
Carlo U. Segre
Associate Professor of Physics
Illinois Institute of Technology
Chicago, IL 60616
Voice:(312) 567-3498
FAX: (312) 567-3494
http://www.iit.edu/~segre
[EMAIL PROTECTED]
--
TO UNSUBSCRIBE FROM
.
Carlo
---
Carlo U. Segre
Associate Professor of Physics
Illinois Institute of Technology
Chicago, IL 60616
Voice:(312) 567-3498
FAX: (312) 567-3494
http://www.iit.edu/~segre
[EMAIL PROTECTED]
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe
the relevant documentation. It is
called dhcpd. If you need to connect Linux machines using DHCP, there is
also a DHCP Client package dhcpcd.
I set this package up in less than an hour and it works perfectly.
Cheers
---
Carlo U. Segre
Associate Professor of Physics
you need to do is to put the appropriate file in the /etc/menu directory.
The documentation is in the /usr/doc/menu directory.
Hope this helps,
Carlo
***
*Carlo U. Segre
the nfs method.
Could someone please explain the new methods?
Cheers,
Carlo
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616 *
* Voice: (312) 567-3498 FAX: (312) 567-3494
with this package, however,
so I cannot tell you how complete it might be.
Cheers,
Carlo
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical
,
Carlo
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616 *
* Voice: (312) 567-3498 FAX: (312) 567-3494
in an ISA 486 system for a long time. Any insight
from users out there would be much appreciated...
Cheers,
Carlo
***
*Carlo U. Segre *
* Department
-gate.weizmann.ac.il/Xmgr/
I am trying to figure out how to make Debian packages and then I will
probably make one for this program.
Cheers,
Carlo
***
*Carlo U. Segre
attention to these BIOS settings. Is there any way for me to force it to
pay attention?
Thanks,
Carlo
***
*Carlo U. Segre *
* Department of Biological, Chemical
Hello All:
Does anyone know of a program which writes PDF files under Linux?
Cheers,
Carlo
***
*Carlo U. Segre *
* Department of Biological, Chemical
this problem?
Is there any way to recover the proper inetd.conf (I know that a number of
packages modify this file)?
Thanks
Carlo
***
*Carlo U. Segre
denied'.
Is this a new security feature? Is it possible to switch it off?
Thanks in advance,
Carlo
***
*Carlo U. Segre *
* Department of Biological
.
Sorry for wasting bandwidth :)
Carlo
On Fri, 30 May 1997, Carlo U. Segre wrote:
Hello All:
I just finished upgrading our Debian cluster to the frozen distribution
and now the mechanism we used for synchronizing important system files is
no longer working. With the previous setup we used
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616 *
* Voice: (312) 567-3498
. In general, it is best to run dselect only
from a text console.
Hope this helps and keep asking the list if you have difficulties, usually
the answers are quick and helpful.
Carlo
***
*Carlo U
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616 *
* Voice: (312) 567-3498 FAX: (312
to be rebooted because of this problem. The kernel version
is 2.0.27.
Any help would be appreciated!
Carlo
***
*Carlo U. Segre *
* Department of Biological, Chemical
.
Carlo
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616
will be happy to resubscribe if
need be.
Thanks,
Carlo
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences
.
Cheers
Carlo
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology
be compiled into the
kernel?
Help!
Cheers,
Carlo
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616
gives the most problem.
Cheers,
Carlo
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616 *
* Voice: (312) 567-3498 FAX: (312) 567-3494
Pentium.
Considering the price I got on the board, a good value!
Cheers
Carlo
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences
with no problem as well as the AMD chips.
Cheers,
Carlo
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616 *
* Voice: (312) 567-3498 FAX: (312) 567-3494
the window managers befor xbase is done. Usually, the second time things
work out fine.
Cheers,
Carlo
***
*Carlo U. Segre *
* Department of Biological
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616 *
* Voice: (312) 567-3498
haven't been able to locate any
hard information.
Cheers,
Carlo
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences
On Thu, 12 Dec 1996 [EMAIL PROTECTED] wrote:
On 12 Dec 1996, Rob Browning wrote:
Carlo U. Segre [EMAIL PROTECTED] writes:
Indeed, that is what I meant above by saying that the configuration files
seem OK. Both the Xresources files have valid entries in them for the
'greetColor
) and 'greeting' (Debian Linux (CLIENTHOST)).
Clearly the configuration files are not the problem but something else
must be set improperly.
Cheers
Carlo
***
*Carlo U. Segre
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616 *
* Voice: (312) 567-3498 FAX: (312) 567-3494
U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616 *
* Voice: (312) 567-3498 FAX: (312) 567-3494*
* [EMAIL
.deb
frozen/binary-i386/x11/xmanpages_3.2-1.deb
Cheers
Carlo
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616 *
* Voice: (312) 567-3498 FAX
in advance for any responses.
I have successfully run linux on a Cyrix 6x86 P133+ (120MHz clock). It
works just fine!
Cheers
Carlo
***
*Carlo U. Segre
on the master ftp site?
Cheers
Carlo
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616 *
* Voice: (312) 567-3498 FAX
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616
EtherPower card will not (at least in all the machines I have tried) work
as a loadable module. If I compile it into the kernel it works fine,
however.
Cheers,
Carlo
***
*Carlo U. Segre
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616 *
* Voice: (312) 567-3498
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616 *
* Voice: (312) 567-3498
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616 *
* Voice: (312) 567-3498 FAX: (312) 567-3494
U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616 *
* Voice: (312) 567-3498 FAX: (312) 567-3494*
* [EMAIL
have told me that?
I had the same problem and it went away after reinstalling the procps
package by hand. I think that the library is in the package itself.
HTH
Carlo
***
*Carlo U. Segre
times. The only difference is that on a cold
boot to Windows95, the CDROM was never visible before the change.
Cheers,
Carlo
***
*Carlo U. Segre
and the end of this message in case that
can help anyone figure out what happened.
Ditto here, I noticed the same problem this afternoon!
***
*Carlo U. Segre
. This will then boot LILO properly without
having to write to the MBR. It works...
Carlo
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical
be established so the two would not be loaded together.
Cheers,
Carlo
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences
!)
Carlo
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL
and LILO.
Anyway, just thought I'd lay my experiences out for all to use if they
like...
Carlo
***
*Carlo U. Segre *
* Department of Biological, Chemical
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616 *
* Voice: (312) 567-3498 FAX: (312
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616 *
* Voice: (312) 567-3498
.
Hope this helps!
Carlo
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616 *
* Voice: (312) 567-3498 FAX: (312) 567-3494
you have them, the techniques above should work.
Good point, I have found this to be a problem with some of the SMC cards
with Plug'n'Play as well.
Carlo
***
*Carlo U. Segre
***
*Carlo U. Segre *
* Department of Biological, Chemical and Physical Sciences *
*Illinois Institute of Technology, Chicago, IL 60616
terminating things after a minute of inactivity. I will continue to
investigate and keep you updated.
Carlo
***
*Carlo U. Segre *
* Department of Biological
89 matches
Mail list logo
