i'm not quite understand your problem. Do you want to create a debian
unstable chroot system under a production server which you could chroot
into? if yes, then here is a simple step.
1. create a normal debian chroot system. debootstrap is good for this.
2. when you chroot into this system. set
Once in debian galaxy, I heard Cheryl Homiak say
It's possible this might get more answers on another list, but thought I'd
try here first.
I have a via82c597 rev 4 chipset and an Award bios. I have anabled the
via82cxxx support in my kernel, but perhaps I do not understand what
numbers to
Once in debian galaxy, I heard Peter Jay Salzman say
approximately what would hdparm -tT report when udma is enabled?
rate of data transfer.
mine is roughly 128MB/s for -T and 35 MB/s for -t for 40GB Maxtor drive.
cheers,
Chanop
--
Once in debian galaxy, I heard Tomoo Nmura say
Hello,
I'm using Sid i386.
Currently, I choose Apple USB keyboard.
When touching caps lock key, Linux always goes to freeze.
I reconfigure console-common and set keyboard as qwert, US america,
Apple USB keyboard but the problem still exist.
Once in debian galaxy, I heard Anthony Campbell say
For some time now I've noticed that if by mistake I press Ctrl-s in mutt
it freezes and has to be killed. It's not due to anything in my .muttrc
file because it happens even when this file is not there. Has anyone
else noticed this?
Press
Once in debian galaxy, I heard John Foster say
3. Asus CUV4X-D dual P-III 1.13 Ghz CPU
4. MSI 694D Pro2 dual P-III 1.13 Ghz CPU
For this part I had abit VP6 which has very similar configuration. My
cpus are PII933 stepping cc0.
This board has never anything else besides debian. I pull my old
Hello,
That button is a hidden features (or annoying features if you like) in
windowmaker. It is a language switch button for switching between xkb
keymap. You can turn it on or off in the windowmaker preference tab #5,
Miscellaneous Ergonomic Preference, with the check box on the lower right
Hi,
This is not really debian topic, but since I got the idea from dpkg-scanlibs
thread from debian-devel two months ago.
In vim, what is the setting to use tab for indent and space for alignment? I
couldn't figure it out since vim always try to use tab instead of space.
e.g. when I use ts=4,
Once upon a time, I heard Eric G. Miller say
On Thu, Apr 05, 2001 at 09:37:58PM +1000, Chanop Silpa-Anan wrote:
Hi,
This is not really debian topic, but since I got the idea from dpkg-scanlibs
thread from debian-devel two months ago.
In vim, what is the setting to use tab
Once upon a time, I heard hammack say
In my Debian Distro's I didn't see any Thai Fonts available - did I miss
them? John
Hi,
I have a couple of thai fonts in testing/unstable. These packages have their
name starts with xfonts-thai-. For terminal try xiterm+thai(txiterm), and
Once upon a time, I heard Joshua Kruck say
Hello,
I am trying to upgrade enlightenment to the .16.5 version. when i do
apt-get install enlightenment i get this as a response.
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are
Once upon a time, I heard Joshua Kruck say
does anyone know the correct line to add to apt sources to get the
newest version of enlightenment. The old on i had
deb http://www.debian.org/~ljlane/downloads/ enlightenment/ stopped
working a while back.
Use this one instead,
deb
Once upon a time, I heard [EMAIL PROTECTED] say
Hi !
I am using a Potato system and I have got some problems with the locales : I
would like to enable the french locale so that programs are displayed in
french,
but I cannot.
I have installed the locale package and tried to set the
Once upon a time, I heard Eric Hanchrow say
Foolish me: I'd been happily running ssh 1:2.2.0p1 on my Potato
system, and then I upgraded to ssh 1:2.2.0p1-1.1. (I got both of
those versions from unstable.) Well, that newer version doesn't
work on potato, because it requires a newer libc. I
Stil have the same problem?
Once upon a time, I heard John Travis say
Okay, I am not able to compile a few things I want back after a new install.
They all crap out at glibconfig.h (which is provided by libglib1.2-dev, which
I do have installed). The file is located in
Once upon a time, I heard John Travis say
I just nuked my Storm install (intentionally, but it is a great distro :-),
and did a full reiser-debian install and re-upgraded to Woody. In trying to
get everything back the way it was I have run into a few problems. I can't
seem to compile any
Does anybody know the reason why Debian mirror @ mirror.aarnet.edu.au
has been stop mirroring woody main since late last month?
BTW, where is the nearest mirror, in Australia?
Chanop
--
,-.
| Chanop Silpa-Anan
Once upon a time, I heard Andrew J Cosgriff say
Of course, the advantage of mirror.aarnet being broken all last week
means we missed the whole woody/glibc saga :)
It's only debian (debian-US) that has been stop-working. debian-nonUS
has been fine the last two weeks. I got openssl and heimdal
Once upon a time, I heard Allan Andersen say
I've just reinstalled my debian system. It all works just fine
except my licq.
Congrat.
When I start the licq program I get an error
similar to this:
1:57:14: [WRN] Licq: Ignoring stale lockfile (pid 27928)
11:57:14: [ERR] Unable to load plugin
Once upon a time, I heard John Reinke say
There is a newer version - 4.75, which seems *slightly* less buggy for me.
If you don't already have it, add the security line to your
/etc/apt/sources.list file, and then run:
apt-get update; apt-get upgrade
and it will install the newer
Once upon a time, I heard Robert L. Harris say
Actually I kinda went with 2. With Debian, I installed both the debian
473 and the netscape version of 474 (into /usr/local/netscape per
default) and then just did an update-alternatives to point to this
version. Worked very nice and clean
Once upon a time, I heard Albert Kinderman say
I am using xfs and xfstt. After the most recent apt-get update and
upgrade to frozen, the default fonts in X are huge. X and xfs are at
3.3.6-10.
I bet you have xfonts-100dpi installed somewhere! Try remove the package
or put path to
Once upon a time, I heard Nick Croft say
I've fixed the look of Netscape with some help from a local lad. Wondering
if I might get some help from this list in setting a size for gnome.
I just tried grdb package from helix. It works very good, mimicing gtk-theme
for some motif/lestif
Once upon a time, I heard Nick Croft say
Debian Users,
I've migrated to potato from rh. I changed for philosophical reasons, and
am stoked.
Some things needed customising. Printing and mail were a little
trouble. Only one more major worry: the size of fonts in Netscape menus,
gnome
Once upon a time, I heard Jens Helweg say
Hi,
I am trying to get my PCMCIA networkcard up and running. It came with a
disk that includes
a driver for that card: pcnet_cs
The pcnet_cs.c on the disk looks different than the one that I have in
/lib/modules/2.2.15 - so I need
to compile it.
Once upon a time, I heard Jens Helweg say
Hi,
I've just installed my first debian disrtibution (Potato 2.2) and I
wanted to compile a new kernel but get the
following error message when I execute make menuconfig:
rm -f include/asm
( cd include ; ln -sf asm-i386 asm)
make -C
Once upon a time, I heard FIOL BONNIN Antonio say
I imagine that this question is a FAQ, but I don't know where to find the
answer:
I have Netscape installed, and whenever I try to install a plugin,
netscape stops working (Bus error when trying to start it). The only
solution I have
Once upon a time, I heard Antonio Fiol Bonnํn say
How do I check if my Netscape is a libc6 one?
[EMAIL PROTECTED] apt-cache search communicator-smotif
communicator-smotif-473-libc5 - Netscape Communicator 4.73 (static Motif)
(libc5 version)
communicator-smotif-408 - Netscape Communicator 4.08
Once upon a time, I heard Aaron Maxwell say
I'm running what was CorelOS, pretty much converted to woody (remove
all the packages with corel in them, edit sources.list, then apt-get
update apt-get upgrade).
The correct way to go.
My mouse doesn't work in X, much as if I had
the wrong
Once upon a time, I heard Suresh Kumar.R say
Hi,
When I start emacs in a debian machine, it is not obeying .Xdefaults file
in the home directory. It takes the .Xdefaults file, if it is named as
.Xdefaults-fully.qualified.machine.name
Whereas, in a Redhat linux machine, emacs obeys the
Once upon a time, I heard Ethan Pierce say
Hi, Im having difficulty getting my mouse to work under X
properly...particularly the middle mouse button. xf86config just plain kills
x, but I can get x running with XF86Setup. The problem is the middle mouse
button, what mouse Server to use
Once upon a time, I heard Moore, Paul say
Hi,
I have a PC with APM support at home. I've installed Debian (Potato) onto it
and built my own kernel with APM support compiled in (I needed to build my
own to add the APM real mode calls option, as the default kernel crashes on
a poweroff call).
Once upon a time, I heard Joseph de los Santos say
Hi,
I wanted to try sawfish but it seems that it wants libreadline.so.3 instead
of
what is unstable or woody is using right now (libreadline.so.4).is there a
way
I can get sawfish to use libreadline.so.4 instead of 3? or maybe get
Silpa-Anan #
#gpg @ http://kenji.anu.edu.au/~chanop/chanop.asc#
##
pgpChHZynMThf.pgp
Description: PGP signature
, but not instead of it.
So do you know any possibility that GNOME's login screen lets
me choose the pure WindowMaker session ?
Best regards and thanks for your time,
Oliver
--
##
#Chanop Silpa-Anan #
#gpg @ http
? potato already use glibc 2.1
Package: libc6
Version: 2.1.3-10
Chanop
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| got sparetime ? |
| http
that moment on, log in as cmatheson instead of fatmike.
When you're satisfied nothing else on the system is 'owned' by the user
fatmike:
$ rmuser fatmike
--
##
#Chanop Silpa-Anan #
#gpg @ http
Once upon a time, I heard Kent West say
Chanop Silpa-Anan wrote:
Once upon a time, I heard Brian say
Cameron Matheson said:
Hey,
I want to change my user name from fatmike to cmatheson. Is this
possible?
I think the easierway is edit your /etc/password
or X-strikeforce home page.
In potato, it seems like default term name has been chaged back to xterm.
Chanop
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National
Once upon a time, I heard David Henningsson say
Okay, so I continue to try to get my PCI128 working.
I ran make menuconfig (kernel 2.2.14) and this time, i checked OSS. And then
a lot of new options appeared, and I checked my old card (SB16). And after a
reboot, cat /dev/sndstat started
Once upon a time, I heard Rob say
Hmm.. I have one for 2.2.14, one of the reasons I don't just
go up to .15 ... also a reiserfs patch..
I have been using 2.2.14 reiser patch on 2.2.15 since pre10, for about 2-3
months now, the patch applied cleanly and I haven't found a problem yet.
--
,
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| got sparetime ? |
| http
Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| Tel. +61 2 6279 8826, +61 2 6279 8837 (office hour) |
| +61 2 6249 5240 (home +voice mail
it...?
No.
Chanop
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| got sparetime
have stop ntp by /etc/init.d/ntp stop before use ntpdate to
syncronize the clock. Then /etc/init.d/ntp start after you sync you
clock with /etc/init.d/ntpdate start.
Chanop
--
,-.
| Chanop Silpa-Anan
are still in select menu. X would be your friend (note capital
X)
Exit without altering the database
Isn't this the same thing as above?
Chanop
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED
to try. What
you would like would be a sort of a back button or an undo that would
just back-step one step at a time.
just X when the confict screen appear :), Other options is Q
chanop
--
,-.
| Chanop Silpa-Anan
--
##
#Chanop Silpa-Anan #
#gpg @ http://kenji.anu.edu.au/~chanop/chanop.asc#
##
pgpeU100e2eW7.pgp
Description: PGP signature
! or use dselect and hold the package with = key
Chanop
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University
Once upon a time, I heard Richard Taylor say
On 4/6/2000, 7:31:18 PM, Chanop Silpa-Anan [EMAIL PROTECTED]
wrote
Once upon a time, I heard Viktor Rosenfeld say
I recently switched my working environment from Windows to Debian only
and I've been using Netscape Mail so far. And I
be nothing serious
would happen.
Chanop
--
##
#Chanop Silpa-Anan #
#gpg @ http://kenji.anu.edu.au/~chanop/chanop.asc#
##
pgp71TonHal3h.pgp
Description: PGP signature
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| got sparetime ? |
| http://kenji.anu.edu.au
at this either)
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| got sparetime
too.
Chanop
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| got sparetime
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| got sparetime ? |
| http
.. you will find out :)
I think that's almost everything you didn't do when you skip using boot floppy.
Chanop
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University
,
Chanop
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| got sparetime
a partition and tried booting, but it wants me to
configure them ahead of time. What needs to be done to do that.
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University
for this?
Couldn't remember what is that question for!
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| got
). And
you could bind port of ssh2 to 22 instead of default and make it fork
ssh1d when ssh1 client connects.
Cheers,
Chanop
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National
that file to
.config in /usr/src/linux, then reconfig kernel base on that file.
Cheers,
Chanop
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| got sparetime ? |
| http
--
##
#Chanop Silpa-Anan #
#gpg @ http://kenji.anu.edu.au/~chanop/chanop.asc#
##
pgpcmxq9vypMf.pgp
Description: PGP signature
font before 100dpi font in /etc/XF86Config. It helped me
once or twice with recent potato installation, when I have both fonts intalled.
Chanop
--
##
#Chanop Silpa-Anan #
#gpg @ http://kenji.anu.edu.au/~chanop
X connection to :0.0 broken (explicit kill or server shutdown).
Anyone have any hints on how to fix this?
--
##
#Chanop Silpa-Anan #
#gpg @ http://kenji.anu.edu.au/~chanop/chanop.asc
and
read PLIP howto for detail how set up connection. It's quite easy though.
Then, you could use NFS, ftp, ssh. to transfer the file.
--
##
#Chanop Silpa-Anan #
#gpg @ http://kenji.anu.edu.au/~chanop/chanop.asc
Once upon a time, I heard Nick Barron say
ok first off, it is 'I heard Beavis say' not said u nerd!
Terribly sorry for my bad English, I hope that I get it right this time!
second, translate this into english please:
I'm not sure whether I could translate this into a good English or not.
For Debian user, I suggest install kernel-packge and read
/usr/doc/kernel-package/README.gz
then in /usr/src/linux
Do what README suggest.
Chanop
Once upon a time, I heard Beavis say
the directions to compile a new kernel suck!
this link has inaccurate information
Once upon a time, I heard Nick Barron say
ok, so we everyone is clear
i am trying to get the make bzImage command to write this
/usr/src/linux-2.2.x/arch/i386/boot/bzImage
but it doesn't, it gives me an error
make[1]: as86: Command not found
Is
Once upon a time, I heard [EMAIL PROTECTED] said
hello all,
ok, i havent touched ppp for quite some time now and im having some
problems dialing to an ISP where the line im using is connected behind a
PABX system ...
anybody have any idea what should i add to my chatscript (created
Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| got sparetime ? |
| http://kenji.anu.edu.au
?
Robert
I'd say, just keep your home directory ! wipe the rest out.
Chanop
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University
shou;d use for this?
check hor sync anf ver sync frequency in your /etc/X11/XF86config
BTW, what's your graphic card
Chanop
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National
Once upon a time, I heard Svante Signell said
During a recent update with apt-get my installed
wmaker-[plain,kde,gnome]_0.6.1.1-1 was REMOVED since in
wmaker_0.61.1-4 all these packages were merged into one bigger
package. What is the loqic behind removing my wmaker installation
instead of
let's take a look at keybinding and keyboard output from termial
You could check yours with ^V-keystroke (pressing ctrl-v then press the key)
in linux-console
H = ^[[1~, E = ^[[4~, BS = ^?, del = ^[[3~
for X, debian has a policy that BS should produce ^? and del ^[[3~ so that
it's compatible
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| Tel. +61 2 6279 8826, +61 2 6279 8837 (office hour) |
| +61 2 6249 5240 (home +voice mail
Try xset +fp unix/:7100 or something similar. xfs-xtt use port 7100, same as
xfs.
Chanop
Once upon a time, I heard Bart Szyszka said
Hello,
Someone here suggested getting xfs-xtt to add True Type font support
to Linux. I did that and am getting trouble setting it up. Here are the
steps
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| Tel. +61 2 6279 8826, +61 2 6279 8837 (office hour) |
| +61 2 6249
hesitate with insultingly simple ones, either.
I think you need es1371 probably es1370 in sound section :) That's all you
need for SB PCI128
Chanop
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED
-S filename
Chanop
--
##
#Chanop Silpa-Anan #
#gpg @ http://kenji.anu.edu.au/~chanop/chanop.asc#
##
Once upon a time, I heard Sven Esbjerg said
deinstalling half of the Gnome-stuff. I believe it's Perl thats busting it up
again but I'm not sure.
There are two packages that cause the problem, one is xscreensaver that
recommends perl instead of perl5. And libgtk1.2 which depends on
]
:) Tucson, AZ DM42nh QRP-L #1985 http://www.primenet.com/~nielsen
:)
:)
:)
:) --
:) Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
:)
--
,-.
| Chanop Silpa-Anan [EMAIL
the rest.
Chanop
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| Tel. +61 2 6279 8826, +61 2 6279 8837 (office hour
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| got sparetime ? |
| http://kenji.anu.edu.au
HD with minimal X support. So
don't worry.
Chanop
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| Tel
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| got sparetime
your /etc/X11/Xsession
Chanop
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| Tel. +61 2 6279 8826, +61 2 6279
.
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| Tel
.
No, not in Debian 2.1
It will be possible in Debian 2.2
And how is it possible in potato?
try recent base-config and tasksel packaae
Chanop
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED
?
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| visit my web site |
| http
E: Sub-process returned an error code (1)
check /var/lib/dpkg/info/pgaaccess.prerm content check it with other. Usually
the first line shoule be
#! /bin/bash -e
Chanop
--
,-.
| Chanop Silpa-Anan
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| Tel. +61 2 6279 8826, +61 2 6279 8837 (office hour) |
| +61 2 6249 5240
UUU X X O
Shackles cannot keep me bound | A REAL Man's OS!
forever. I'm outta here. |
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
--
,-.
| Chanop Silpa-Anan
to 800x600 640x480 in 16 bpp mode.
pure 640x480 didn't work for me.
regards,
Chanop
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University
] /dev/null
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| visit my web site (not yet finished
it?
If Linux, as root
edit /etc/lilo.conf
boot=/dev/hda
Then run lilo
Assume that your disk is IDE primary master.
for more detail, consult man lilo.conf
regards,
Chanop
--
,-.
| Chanop Silpa-Anan
libMesaGL to libGL that use HW
acceleration on RIVA chipset. It works fine, but not fast though.
Chanop
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University
if you just wanna use it locally. It gives you with nice face login,
like IRIX on SGI.
cheers,
Chanop
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University
. Any more
ideas?
As user who are running X
#xhost yourhostname
--
,-.
| Chanop Silpa-Anan [EMAIL PROTECTED] |
| Australian National University |
| visit my
1 - 100 of 153 matches
Mail list logo
