On Tue, 16 Apr 2002, Shawn McMahon wrote:
begin Daniel Mashao quotation:
messages (if they were error messages at all :) ). All I want is a
program that will take the address of the mirror site, the dist I want,
and say get woody for me. Have the program get it. Simple.
So
I find debian-cd complicate and I cannot find the reason why it should be.
All I want is to go to my usual mirror site and get woody distribution
files and write them to a cd so that I can go home and update my
computer to woody. 'potato' is just plain old - released in 2000, etc. I
have a scanner
On 3 Mar 2002, james martinez wrote:
Ok I am running Woody and want to get my Handspring Pilot to sync with
my computer under Linux. This is one of the only reasons I still boot
Windows. I am using Gnome with the Enlightenment window manager. When I
go into the Gnome control center to setup
Which program is doing that and how can I stop it from updating my
resolv.conf?
/--/
Daniel J. Mashao
Electrical Engineering[EMAIL PROTECTED]
University of Cape Town
Hi
Can anybody please help
I am trying to setup a network and getting frustrated by the day.
I am dialling in from home (HOME) 192.168.0.4 into my work (WORK)
192.168.0.1 using PPP. I have set a kernel at work with all the
IP stuff in the kernel. Stuff like NAT and so on.
Once I am logged on
On Sat, 21 Jul 2001, Wayne Topa wrote:
Subject: Where do I find NAT for IPTABLES?
Date: Sun, Jul 22, 2001 at 01:43:23AM +0200
In reply to:Daniel Mashao
Quoting Daniel Mashao([EMAIL PROTECTED]):
Is it an option that I need to make a module or insert in the kernel
Is it an option that I need to make a module or insert in the kernel? In
which part of the kernel setting is NAT mentioned? If all I want is just a
simple setting so that I can use my networked computer to surf the net
what should my iptable look like? Where should it be kept?
HELP
I get the following error message
home:/home/daniel# apt-get -f install
Reading Package Lists... Done
Building Dependency Tree... Done
Correcting dependencies... failed.
Sorry, but the following packages have unmet dependencies:
libesd0: Depends: esound-common but it is not installed
E:
On Tue, 6 Mar 2001, Frodo Baggins wrote:
THANK YOU VERY MUCH. IT WAS INSTALLED WITHOUT PROBLEMS. NOW I MUST CHECK
THAT IT WORKS.
On Tue, Mar 06, 2001 at 11:06:24PM +0200, Daniel Mashao scripsit:
Hi,
I cannot install real player because the Debian install program says
You are running in non
Hi,
I cannot install real player because the Debian install program says
You are running in non-interactive mode ...
What? I am running in an interactive mode I thought. Anybody see this
error anywhere?
/--/
Daniel J.
I cannot boot from my harddrive. I made sure the root partition is
bootable according to fdisk. This is a new Debian install using potato
disks. I can boot (slow) from a diskette.
Any ideas?
/--/
Daniel J. Mashao
On Sun, 4 Feb 2001, David B. Harris wrote:
To quote Daniel Mashao [EMAIL PROTECTED],
# I cannot boot from my harddrive. I made sure the root partition is
# bootable according to fdisk. This is a new Debian install using potato
# disks. I can boot (slow) from a diskette.
The error you get
When will Python 2.0 be included in a stable Debian distribution? Do we
have to use 1.5.2 even when 1.6 and 2.0 is out?
/--/
Daniel J. Mashao
Electrical Engineering[EMAIL PROTECTED]
Any advice? I would like to get the latest Python 2.0. It is available for
*.rpm and I would like to get it on my Debian system. Has anybody tried
it?
/--/
Daniel J. Mashao
Electrical Engineering
How can I install Xmysql on a Debian system?
/--/
Daniel J. Mashao
Electrical Engineering[EMAIL PROTECTED]
University of Cape Town http://www.eleceng.uct.ac.za/~daniel
I have a program that I want to compile. According to the INSTALL I need
to run gnumake. And to my suprise I could not find this program anywhere
on the Debian ftp sites. Any help?
/--/
Daniel J. Mashao
On Thu, 17 Feb 2000 [EMAIL PROTECTED] wrote:
check ftp.linuxberg.com /pub/ISO they got isos of most every linux distro
out there corel caldera debian suse slackware stormix redhat mandrake etc.
Check also:
http://linuxos.webprovider.com/;
Once one has downloaded and ISO binaries what
Hi,
I need help with the following.
My disk which had /usr crashed. I was glad that /var and /etc on separate
disks were still okay. But well since I am using Debian I have lots of
problems. Problem #1 is that apt-get refuses to get new applications
because it claims that those applications
I have searched netscape.com to no avail and I am hoping someone can help
me. I used to and still access a site using netscape 4.03 running some
Java scripts program. Now I was foolish to want to install the latest
netscape 4.07 and I am very dissappointed. First I see no improvements
except
On Sun, 5 Dec 1999, Eric Hagglund wrote:
I have not been able to get my printer to print. I
What printer package are you using? Are you using something like apsfilter
or magicfilter? The problem you are describing seems to have somthing to
do with dos vs linuix termination. I remember reading
I am trying to get the beast to work but I am unsuccessful anyone out
there know how to get it to work so I can record CD's?
I get the following messages during booting
paride: epat registered as protocol 0
pcd: pcd
I once did it, but I forgot what I did. Searching the archives I could not
find pine installation messages. Anyone remember? I just can't get used to
mutt. It smells too much like vi and I find vi hard.
/--/
Daniel J.
I am getting emails from some fool saying
Ifwewerehackerswedownyourdumbass
which means If we were hackers we down your dumb ass
The emails are generated from within my system. The problem started when I
logged into one of my old machines and ran last -10. I was suprised to
see a user by
I am trying to install Debian on an old machine (Pentium) but the
installation stops after detecting the SCSI hardrive. I have searched the
old messages on Debian and found differing views as to what one should do
to get it to install.
I was wondering if the final solution has been found? The
I am trying to learn Java and the linux system seemed a good environment.
So I got hold of a tutorial that showed how to test javac and java
programs. I installed, via apt, jdk1.1 and jdk1.1-dev.
Everytime I run javac I get no error messages and nothing works. I trioed
to see what javac was and
Hi,
I once had a problem moving from bo to slink. Many packages were removed
and had to be reinstalled. One of the things that got lost is the
documentation on C functions. For example I used to run man strcpy and
the documentation of the function strcpy will be displayed, now it does
not work.
Yesterday I had to re-install a lot of packages as my system became
'unusable'. The problem began when I tried to fix Star Office after
upgrading. I think my system was slink/potato but I couldn't tell the
percentage of each system. Anyway I thought one way to ensure that the
system works is to
On Wed, 12 May 1999, Johan Pettersson wrote:
Hi!
I have mounted a vfat partion (/dev/hda1 /win vfat defaults 0 2)
But I can not change permissions under /win! Have I missed something
in fstab or is it something else ?
Is it set read/writable by everyone or just root? Are you trying to
On Wed, 12 May 1999, Pollywog wrote:
On 12-May-99 Daniel Mashao wrote:
rebuild it one app at the time.
Which commands did you use with apt-get?
apt-get -f install libc6
There is some discussion in todays emails on the list about upgrading to
libc6_2.2.1 or something and how it breaks
Any help? Unlike the tough guys who have problems with SO in potato, I
have a problem with SO in slink. It worked fine in my previous hamm/slink
setting, now it just Aborts. I have tried some of the suggestions I have
seen for potato but they do not work. Any ideas?
I have checked the recent list messages about StarOffice not working after
upgrading but they all seem different from mine. In my case it just says
Abort and nothing. Any ideas?
/--/
Daniel J. Mashao
I cannot use apt-get at all. It seems to be working but then complains
about a package that it cannot install. It says I must install it first
then remove it. I cannot install the said package (gnotepad+) as the
installer (dpkg) refuses. And finally I am in the chicken and egg
problem.
I have
Subject: Help with apt
I cannot use apt-get at all. It seems to be working but then complains
about a package that it cannot install. It says I must install it first
then remove it. I cannot install the said package (gnotepad+) as the
installer (dpkg) refuses. And finally I am in the chicken and
On 31 Mar 1999, Bud Rogers wrote:
setenv SAL_DO_NOT_USE_INVERT50 true
I read somewhere that using that fix caused problems with other programs.
Have you seen this?
None that I have seen. I also read the same thing but I have not seen any
program that reacts badly to it. The other option is
On Wed, 31 Mar 1999, Ed Cogburn wrote:
I know about PW (Pathetic Writer which is part of SIAG) and
AbiWord (a GTK project), but I'm curious to know if there are any
other WP projects in existence out there, especially if one of the
goals is being able to read and write MS Word
On Thu, 1 Apr 1999, Lev Lvovsky wrote:
Hello,
well, if any of you are wondering, I was able to get debian installed on
the system by low level formatting the IDE drive from BIOS (LILO kept
giving crc errors upon uncompressing Linux).
Now I have another problem...anything that I download
On Mon, 29 Mar 1999, Shawn Nguyen wrote:
Hi,
I am having some problem with Star Office 5.0, could someone shed some
light on the situation? Apparently when I try to update the mail box
Star Office start to freeze up my computer. What's happening is that my
CPU is being overloaded
On Tue, 30 Mar 1999 [EMAIL PROTECTED] wrote:
Hello.
Ok. I have a copy of Debian on disk. I am attempting to install it on an
IBM PS/2 386. When I boot up using the rescue floppy, I can set up to the
point where it asks me to partition the hard drive. I select next, and I
get an error
On Tue, 30 Mar 1999, Shawn Nguyen wrote:
I am using an S3 graphics card. I guess I'm out of luck huh? Thanks for
the info though even though I find it kind of strange that that would be
the case. I guess I should do some research to see if there's any kind of
fix for this problem.
No
On 23 Mar 1999, John Hasler wrote:
Daniel Mashao writes:
Is there any way to send the output of pppd to a file so I can debug what
is happenning.
Sure. Put this in your script:
echo Running /etc/ppp/running
and the string 'Running' will appear in the file /etc/ppp/running
On Wed, 24 Mar 1999, Hogland, Thomas E. wrote:
Am getting ready to reinstall onto my shiny empty 6G drive in a Compaq
Presario 4840, and would like to avoid the only problem I had last time -
the sound wouldn't work. No playing CD's :-( It auto-recognized the ATI Rage
Pro AGP, the Compaq DVD,
On 22 Mar 1999, John Hasler wrote:
Daniel Mashao writes:
My ip-up.d directory is not executed when pppd wakes up.
Pppd runs those scripts with stdout and stderr redirected to /dev/null.
Thanks for responding. But why don't I see the programs running? I
even put in xload script that runs
My ip-up.d directory is not executed when pppd wakes up. How can I debug
this condition. I have tried putting in simple things like xload in the
directory but they do not get executed. I am able to execute the contents
of the directory if I run ./ip-up file in the /etc/ppp directory but not
when
I have a funny nestcape problem on my home machine. i installed netscape
as root and have two accounts (one me and the other my wife's). As me
(daniel) I can run netscape without problem, but I cannot run netscape as
root nor can my wife run it as all. It dies with bus error.
1. How can i debug
On Fri, 12 Mar 1999, Piotr Perko wrote:
Hello,
I'M LOOking for drivers for that Eternet device for Linux Slackware
2.0.34.
Please help me - i don't know where i can find it.
[EMAIL PROTECTED]
[EMAIL PROTECTED]
Piotter.
THX
I do not know anything about Slackware but use NE2000
On Mon, 15 Mar 1999, John Stevenson wrote:
Hello,
I am running a linux print server that is working very nicely
with win95 clients (using samba) but am having trouble
connecting to the printer from linux clients.
I have read the printing howto (see snippet below) and it refers
to the
On Wed, 17 Feb 1999, Robert-Jan Kuijvenhoven wrote:
I have installed Linux and it works just fine, if I log in as root. When I
log in as a 'normal' user a lot of thing don't work. For example I can't use
the pon command when I am not the root. I also can't start X11 when I am not
the root.
I have a problem with 'gnotepad+'. For some reason I cannot remove the
application.
vitasat# dpkg --remove gnotepad+
dpkg: error processing gnotepad+ (--remove):
Package is in a very bad inconsistent state - you should
reinstall it before attempting a removal.
Try to install X on the minimum specifications first and try to improve
it. That is do not select the big numbers but just the smaller ones E.g.
try to get 640x400 mode working first by underspecifying the capabilities
of your system. Also make sure that only your Xserver is installed. It is
On Mon, 15 Feb 1999, Shaleh wrote:
On 15-Feb-99 David Webster wrote:
Any guesses as to what driver to use for this card since it is not
directly supported?
Try NE2000 PCI. That is how I am using it on my system.
I am having trouble tryimng to get sound card installed on my home PC with
an onboard sound card. Windows reports that it is ES1938 with PCI IO BASE
D400. 'lspci' gives the following response
00:0d.0 Multimedia audio controller: ESS Technology: Unknown device 1969
The card works in Windoze. I
Since the GNU has selected windowmaker as whatever I have tried to
install it on my system. The latest Debian version is 0.20 although there
are RPMs for newer versions.
Anyway my problem is in trying to install wmakerconf and wmakerconf-data.
wmakerconf-data says it cannot install/configure
On Tue, 26 Jan 1999, Paul Nathan Puri wrote:
I'm trying to set up my parallel port so that my printer will work properly.
That should be simple to do. Just enable the parallel printer options.
I compiled 2.2 so that all this stuff is in modules that I would now have to
insmod. How do I do
On Tue, 26 Jan 1999, Hamish Moffatt wrote:
On Tue, Jan 26, 1999 at 02:36:22PM +0200, Johann Spies wrote:
I am also a Pine user and last year tried out Mutt for a while. What I
found was that Mutt did not handle mail sent to a lot of users at the same
time very well. I regularly send mail
I would like to drop pine to move to mutt but my main problem is that mutt
does not seem to have a folder listing like pine. I like the folder
listing as it allows me to move through all my folders and see if they
have new messages.
I don't like pine anymore. It gives me bad feeling that they
On Thu, 24 Dec 1998, Jim Foltz wrote:
Daniel,
I think this is a kernel issue, and more specifically related to
multiprocessing (using more than a single cpu.) You might ask in the
kernel discussion group or mailing list.
Thanks for the suggestion. I have searched on the web for Aiee
My one system dies after some time with message: Aiee: scheduling in
interrupt 00125379. Anyone has idea where to look for help.
-Daniel
/--/
Daniel J. Mashao
Electrical Engineering
How can I mount and read a CD created on windows NT. I have parallel port
HP cdriter. I could not install it on Debian so the easiest was to copy
stuff to my fat partition ad then dual boot into NT and copy the files
from there to the CD. I did that, but I cannot mount it on Debian.
On Mon, 21 Dec 1998, iodine wrote:
Just from memory.. next time you reboot that pc.. goto your bios setup.. and
make sure that you have IDE POWER DOWN turned off.. as if you have it on and
APM stuff not in your kernel, this will cause such problems I believe...
Personally I not played
Any advice of what does the following error message mean
hda:hda: set_multmode: status=0x51 {DriveReady SeekComplete Error}
hda: set_multmode: error=0x04 {DriveStatusError}
Is my hardrive dying?
/--/
I am looking for tips of how to get US Robotics Sportster Voice modem to
work as a voicemail system. I have to software to get it work in Windows
but I do not want to go that route.
/--/
Daniel J. Mashao
On Wed, 9 Dec 1998, rick wrote:
In article [EMAIL PROTECTED] you wrote:
What do the following errors mean:
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1640763,
sector=103023
0
end_request: I/O error,
What do the following errors mean:
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=1640763,
sector=103023
0
end_request: I/O error, dev 03:06, sector 1030230
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda:
On Wed, 9 Dec 1998, John Stevenson wrote:
I have been experiencing the same problem with my hard drive. I
believe the problem is that is is simply reaching the end of its
life as I have had it running solid for the last year and have
had it for 3 years before that.
Daniel Mashao wrote
Some how I managed to lose these files. Where are they so I can get them
back into /usr/include?
/--/
Daniel J. Mashao
Electrical Engineering [EMAIL PROTECTED]
University of Cape
On Wed, 2 Dec 1998, Daniel Mashao wrote:
Some how I managed to lose these files. Where are they so I can get them
back into /usr/include?
Spoke too early. The answers is in lib6c-dev packages. I apparently lost
the files when I upgraded to slink libc6*u version since it was the only
one
After some struggles I was able to install a PCMCIA ethernet card. It is
working wonderfully. Unfortunately intslling it affected my modem card.
Now when I dial using the modem it makes a connection but I can no longer
telnet of ping outside. I changed my /etc/init.d/networks file to the old
one
On Fri, 20 Nov 1998, Kent West wrote:
At 11:35 AM 11/20/98 -0500, Richard Hall wrote:
I did try to run the commands as you describe, and still got 'not found',
so, if you suspect the shell, what does that mean? What can I do about
it?
I would think there is something wrong with the bash
On Thu, 19 Nov 1998, Santiago Vila Doncel wrote:
On Wed, 18 Nov 1998, Daniel Mashao wrote:
Any hints what the following error message mean? I am trying to install
ncurses-base.
dpkg: error processing ncurses-base_1.9.9g-8.10.deb (--install):
subprocess pre-installation script
I used to boot NT but now I cannot after playing with upgrading my system.
I need NT to use SAP R/3 (the only thing I still need from Bill Gates :))
Unfortunately the file /boot/any_d.b was erased. How it was erased I do
not know, but all I know is I need that file to be able to boot NT. This
is
On Thu, 19 Nov 1998, Daniel Mashao wrote:
I used to boot NT but now I cannot after playing with upgrading my system.
I need NT to use SAP R/3 (the only thing I still need from Bill Gates :))
Unfortunately the file /boot/any_d.b was erased. How it was erased I do
not know, but all I know
On Thu, 19 Nov 1998, Richard Hall wrote:
I have made it almost all the way through an installation, but I cannot
make Linux bootable from the hard disk. The error message I get is
/target/sbin/lilo: not found. The file is, in fact, there, but I get
the same message even when I try to run
Any hints what the following error message mean? I am trying to install
ncurses-base.
dpkg: error processing ncurses-base_1.9.9g-8.10.deb (--install):
subprocess pre-installation script returned error exit status 1
Errors were encountered while processing:
ncurses-base_1.9.9g-8.10.deb
How can
How does one change the screen depth fro 8 to 16. I tried removing the 8
bit mode but xinit refuses to start. It says the default 8 bit mode is not
set.
/--/
Daniel J. Mashao
Electrical Engineering
On Mon, 16 Nov 1998, Daniel Mashao wrote:
How does one change the screen depth fro 8 to 16. I tried removing the 8
bit mode but xinit refuses to start. It says the default 8 bit mode is not
set.
Asked too soon I guess. There is an option that can be specified in the
XF86Config file
How can I solve the problems of colors on my system. I installed gnome and
it always comes up with pepper noise. Apps such as xearth cannot run as
they do not have enough colors.
/--/
Daniel J. Mashao
On Thu, 12 Nov 1998, Adam Shand wrote:
I am running on a Pentium 233 with 64 Meg and installing StarOffice
crashes my machine too. It crashes everytime I try. I think it damaged
my partition somehow. Now its time to get gwp working.
which x server are you using? i'm in the process of
On Fri, 13 Nov 1998, Shaleh wrote:
The pepper noise is esound loading. The color map issue is probably caused
by some programs in GNOME eating colors. Try loading xearth w/o GNOME running
and see if that helps.
You failed to mention what window manager you are using. it is the window
On Fri, 13 Nov 1998, Shaleh wrote:
Does anyone know how many colors I have if the depth is set at 8. Do not
say 256 because I am not using that many colors to have 256 colors
exhausted.
8bpp == 256 color
16bpp == 16million
32bpp == 32million
The problem w/ colormaps is that some
On Wed, 11 Nov 1998, Adam Shand wrote:
I runs fine here. I am running slink and have tried three different
kernels, 2.0.32, 2.0.35, and 2.1.127, all work fine. Maybe you need
more video RAM? That thing is a resource pig.
damn, i'm running 2.0.35 with a diamond stealth 3d 2000 (4mb
I want to use an apsfilter instead of magicfilter and I cannot find this
package. Anyone know why it is no longer in the Debian packages?
/--/
Daniel J. Mashao
Electrical Engineering
I am trying to transplant a Debian Linux disk to another formerly Debian
machine. Actually it is from a dual pentium to a single pentium machine. I
have been experiencing a lot of crashes with the dual pentium machine so I
now decided it is time I moved to a single pentium machine. The kernel
Hi,
I have had problems before but now I am running Debian Linux on an SMP
machine and it crashes once a week or so. It locks real hard and all I can
do is press the on/off switch to get started.
I suspected the memory but all the tests I know of do not seem to
indicate the problem is with the
I am trying to install gnome from slink. Using all the 'Basic' packages as
shown in http://www.gnome.org/start/getting_debian.shtml; I found myself
having to download a lot of packages due to dependencies.
Finally I got stuck trying to install libc6_2.0.7u-4.deb with the
following message:
On Fri, 30 Oct 1998, Mika Fischer wrote:
Hi!
I've got a problem with Emacs. I want it to be started in auto-fill-mode.
No problem so far. But I have to use an numeric argument with it.
This is not possible with the '-f' CMD-line option.
So how can I start Emacs in 'auto-fill-mode 70'?
On Fri, 30 Oct 1998, George Bonser wrote:
SiS 5797/5798
This chipset is not listed ... any ideas?
Try running 'SuperProbe' it may be able to identify the chipset.
/--/
Daniel J. Mashao
Electrical
On Wed, 7 Oct 1998, Kent West wrote:
At 05:04 PM 10/7/1998 -0400, Adrian Gudas wrote:
Help! I've installed X, and it works, but the mouse doesn't work (at
all). I'm thrashing around like a spastic cat trying to get back into
shell, but I can't, and without the mouse, how am I supposed to
If I use an application requiring too many fonts eg StarOffice I find that
starting another application eg. Lynx has problem finding the right fonts.
I can solve this simply by killing X and restarting but is there a better
way to restore fonts? (This applies to colors too).
Subject: Font Issues
If I use an application requiring too many fonts eg StarOffice I find that
starting another application eg. Lynx has problem finding the right fonts.
I can solve this simply by killing X and restarting but is there a better
way to restore fonts? (This applies to colors too).
I have finally got pine 4.05 installed. I think it is helping me to
dislike non-free software. Rigth now it is giving me messages I do not
understand. It always complain that Mailbox vulnerable - directory must
have 1777 protection. I cannot figure out which directory it is
complaining about. I
Finally I found the answer to pine problems with mail message. I hear that
they want the spool directory to be world-readable etc.
/--/
Daniel J. Mashao
Electrical Engineering
Anybody installed this package from project/experimental?
I replaced -ltermcap with -lncurses as suggested elsewhere but still I
cannot compile the package becuase it is looking for a crypt() function.
Any help?
I am having a problem with apps that are color intensive (eg netscape) and
font
If I run netscape (or any color or font intensive app) I have problems
starting other applications. I have to restart my Xserver to be able to
start other applications. Does anybody know of a painless solution?
/--/
On Fri, 25 Sep 1998, Brian Armstrong wrote:
I recently installed Debian Linux, the most recent version, and have had
difficulty installing Netscape and Staroffice. It seems to need Motif
or something similiar. Man pages and readme files have helped my setup
of Debian Linux and xwindows.
I have a circular problem trying to install wine. Wine says it cannot
install since libwine is not configured. Libwine would not install since
wine is not configured. It is a case of chicken and egg. Any help?
I have a problem with netscape that only one user cannot run it since
yesterday. I have check that it is the same version, I have checked that
it uses the same libs (using ldd) as for other users. Butonly for this
user it does not work. It just simply aborts and prints Abort.
What else can I
On 8 Sep 1998, Tor Slettnes wrote:
Daniel == Daniel Mashao [EMAIL PROTECTED] writes:
Daniel Is there a way I can trace why his netscape call is
Daniel different. He is not setting any environment variables
Daniel that are different from others?
Are everyone running off
I am trying to upgrade my X on a mainly hamm system. I tried to install
xbase. It complains that it needs ncurses-base (= 1.9.9g-8.6). So off I
download ncurses-base_1.9.9g-8.8.deb and tried to install it. The
installaltion fails because:
dpkg: error processing ncurses-base_1.9.9g-8.8.deb
Just suprised to see one email in my Debian folder :)
/--/
Daniel J. Mashao
Electrical Engineering [EMAIL PROTECTED]
University of Cape Town
On Thu, 6 Aug 1998, Keith wrote:
I recently upgraded to Debian 2.0 and I can't get emacs 20 to install.
Here is the error message I get:
Cannot open load file: debian-rundir
emacs-install: /usr/lib/emacsen-common/packages/install/emacsen-common
emacs20 failed at
1 - 100 of 165 matches
Mail list logo