IP forwarding

I have set up a Linux host with two ethernet cards. IP forwarding is enabled in the kernel and it is in its default state (accept and forward everything). Both ethernet segments, eth0 and eth1 are alive. 1. From the Linux machine I can ping hosts on both subnets an vice-versa. 2. From the LAN that

Re: ipfwadm after kernel recompiling

, Drazen -- From: Jim Pick To: Lalovic, Drazen Cc: debian Subject: Re: ipfwadm Date: Wednesday, July 02, 1997 9:05PM I have recompiled 2.0.29 Kernel to enable IP forwarding and firewalling. When I try to configure ipfwadd it tells me: ipfwadm: setsockopt failed: Protocol not available. Does

RE:ipfwadm

, Drazen -- From: Jim Pick To: Lalovic, Drazen Cc: debian Subject: Re: ipfwadm Date: Wednesday, July 02, 1997 9:05PM I have recompiled 2.0.29 Kernel to enable IP forwarding and firewalling. When I try to configure ipfwadd it tells me: ipfwadm: setsockopt failed: Protocol not available. Does

ipfwadm

I have recompiled 2.0.29 Kernel to enable IP forwarding and firewalling. When I try to configure ipfwadd it tells me: ipfwadm: setsockopt failed: Protocol not available. Does somebody have a solution for this problem. Thank you, Drazen -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word

Second Ethernet Card

I have recompiled the kernel to support IP forwarding. One of two 3C509 Cards that I have on my machine works. What is required to get my second Ethernet Card working? I have tried to add the append=ether=11,0x320.eth1 statement to lilo.conf but it doesn't make it work. Any ideas? Thanks, Drazen

Re: Second Ethernet Card

THANK YOU FOR YOUR HELP. DO YOU KNOW THE PATCH NAME? THANKS, DRAZEN -- From: Philippe Troin To: Lalovic, Drazen Subject: Re: Second Ethernet Card Date: Thursday, June 26, 1997 3:45PM On Thu, 26 Jun 1997 14:12:00 EDT Lalovic, Drazen ([EMAIL PROTECTED]) wrote: I have recompiled

Re: Second Ethernet Card

THANK YOU FOR YOUR HELP. DO YOU KNOW THE PATCH NAME? THANKS, DRAZEN -- From: Philippe Troin To: Lalovic, Drazen Subject: Re: Second Ethernet Card Date: Thursday, June 26, 1997 3:45PM On Thu, 26 Jun 1997 14:12:00 EDT Lalovic, Drazen ([EMAIL PROTECTED]) wrote: I have recompiled

Two Ethernet Cards

Kernel make config

I have just installed debian 1.3 and downloaded some packages from the ftp site. Since I want to use it as a firewall I have to recompile kernel to enable IP forwarding. How can I do it? How to configure second Ethernet card. Thank you, Drazen -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the

CRC Error

I am trying to install Debian 1.3.0 on my machine. It is 100MHZ Pentium with 32K of RAM, 2GB hard drive, Pioneer SCSI CD ROM, and two Ethernet Cards; 3Com 509 and 3Com 590. Hopefully I will be able to put firewall on it. The very first problem was my RESCUE disc. It can not be read and BIOS