Greetings friends. Perhaps someone here can help me. (BTW -- a CC
would sure be nice, if you reply. :)
I am trying to build a short and sweet http redirector using the
twist function from hosts_options(5). I did this before, with ftp,
and inetd. Trouble is, now I am using a machine with xinetd
* John Foster [EMAIL PROTECTED] [000227 23:16]:
away. Is this really a Java problem in Potato or is Netscape crapped
out. I do not have this problem on my stable Slink systems, and the
Someone correct me if I am wrong, but netscape communicator uses its own
JRE; it does not depend on the local
Greetings fellow debheads;
I would like to set my monitor power off times to be different during
the night than during the day. To this end, I have added the following
lines to my crontab (output with crontab -l):
0 10 * * * xset dpms 3600 0 0
30 0 *
I like the idea of making things smaller, but at what cost?
On Sun, Jan 23, 2000 at 11:25:53AM -0600, MiniVend wrote:
Is there some way to set up an installation so that it can be totally
customized for a specefic user's needs. I want to have the following to
be done when installing any
Ok lists, I desperatly need your help.
I have been tasked with moving the company's email from a modem-based uucp
to a tcp/ip based uucp. We will make the firewall our mx, and I have
sendmail installed on it.
uucp can copy files (over tcp/ip) between speedy (an SCO 5.0.5, running
sco's
On Thu, Jan 13, 2000 at 08:18:40PM -0800, George Bonser wrote:
On Thu, 13 Jan 2000, Seth R Arnold wrote:
Ok lists, I desperatly need your help.
I have been tasked with moving the company's email from a modem-based uucp
to a tcp/ip based uucp. We will make the firewall our mx, and I
Greetings once again.
I have a question I hope some networking fellow can help with. I have a NAT
box (sarnold) and a single box hidden behind it (amidala) -- and they won't
stop talking to each other. Here is a typical tcpdump output:
21:40:25.447332 sarnold.25682 amidala.6000: P
Hello again! :)
While trying to setup a dual celeron machine to run MASQ with a friend, we
ran into an insurmountable problem.
He has two D-LINK 530TX network cards, which are listed as supported on the
SuSE.com webpage, and they seem to take the via-rhine module in 2.0 and 2.2
just fine, except
Well, 100+ messages a day finally swamped me. I want to thank all of you for
bringing me into the debian fold so quickly and nicely.
I am unsubbing from the list; I am sure I will be back.
Thanks for all the help. :)
--
Seth Arnold | http://www.willamette.edu/~sarnold/
Hate spam? See
Ooooh!
Only a guess -- but make a crontab entry that runs every five minutes that
runs runq. Probably it should run as 'mail', but I can't be sure.
See what this does. :)
On Wed, Sep 29, 1999 at 09:39:27AM -0500, David Kanter wrote:
I'll post this problem one last time: I must type runq at the
On Wed, Sep 29, 1999 at 05:02:51PM +0200, Jonas Steverud wrote:
When I run some programs (ps, top, etc) I get
Warning: /boot/System.map-2.2.10 does not match kernel data.
Is there some way of fixing this/get rid of the message?
I've compiled the kernel myself and the messages started to
The TrinityOS document has many good ideas in it, including cron stuff -- it
is based on slackware, but you should be able to adapt parts of it without
too much trouble. :)
On Wed, Sep 29, 1999 at 04:03:33PM -0700, bwarsing wrote:
Hi,
I'm a newbie, but I need to set up cron to grep the auth
You want the HOSTTYPE to say i386, since your machine IS a 386-compatible
chip. :)
As for that environment variable, you could parse the output of:
$ uname -rm
2.0.36 i686
And build it yourself... :)
On Wed, Sep 29, 1999 at 08:39:48PM -0400, Salman Ahmed wrote:
(1)
Running Debian 2.1, I
Are you using rawrite or dd, or just a straight copy? A straight copy will
never work, but a rawrite (from dos) or dd (under a unix) will do the job
nicely. :)
On Thu, Sep 30, 1999 at 01:37:11PM +1000, Jordan Howarth wrote:
OK. I have finally got the laptop and the time. I went to ftp.debian.org
Check your /etc/suid.conf file, if you have one. :)
On Wed, Sep 29, 1999 at 08:20:39PM -0600, Art Lemasters wrote:
One account on my system (e.g., one user in the /home directory)
has had its group permission changed to from x to s without my doing
so, a couple of times. For example, in
Well, in multi-user mode, it does NOT prompt for root password (on my potato
anyway... :)
Single user mode MIGHT be different, but I would be suprised.
On Tue, Sep 28, 1999 at 06:50:11PM +0200, Jens Ritter wrote:
Seth R Arnold [EMAIL PROTECTED] writes:
I haven't tried this myself... but, I
On Tue, Sep 28, 1999 at 05:19:24PM -0400, Fraser Campbell wrote:
I realize the kernel is a very special piece of software but still see no
reason why it is treated differently from normal software. Perhaps the
upgrade process depends on the virtual package kernel-image which I don't
seem to
On Tue, Sep 28, 1999 at 06:20:36PM -0400, B. Szyszka wrote:
Personally, I find it difficult to troubleshoot problems when the only
data I'm given is These things cost money. Give us something to work
with.
Well buy something else isn't exactly a very good solution to a problem
either. I
Kenward, check out the /usr/doc/exim/spec.txt.gz file, near line 11900 for
some information on setting up a smarthost thingy.
(Anyone else think exim's docs might be a bit too big? :)
On Tue, Sep 28, 1999 at 04:51:57PM -0700, [EMAIL PROTECTED] wrote:
Sorry, but I cannot figure out how to get
On Tue, Sep 28, 1999 at 11:05:20PM -0400, B. Szyszka wrote:
Well I'm not really ready to configure one yet. I was just asking for
people's personal experiences with them. Do they display things just
as well as Windows would? Worst? The same?
The few that I have looked at do not look as nice as
On Wed, Sep 29, 1999 at 06:03:09AM +0100, Mark Brown wrote:
On Tue, Sep 28, 1999 at 07:49:21PM -0700, Seth R Arnold wrote:
On Tue, Sep 28, 1999 at 04:51:57PM -0700, [EMAIL PROTECTED] wrote:
Sorry, but I cannot figure out how to get mail to other people on our LAN
using exim. Those I send
On Wed, Sep 29, 1999 at 01:54:42AM -0400, Rob Mahurin wrote:
Perhaps something like this (assuming the target drive is /dev/hdb).
(I'm going to emphasize that I'm JUST GUESSING and you should RTFM all
the suggestions I give here).
# mke2fs /dev/hdb1
# makeswap /dev/hdb2
should read: #
On Wed, Sep 29, 1999 at 07:13:45AM +0100, Mark Brown wrote:
On Tue, Sep 28, 1999 at 10:05:56PM -0700, Seth R Arnold wrote:
Well, the line number that I pointed at tells how to make exim point at a
smarthost. It looked like the smartuser director might be able to do it, but
it looked more
Shaul, give us output from df -- I bet it isn't much.
On Wed, Sep 29, 1999 at 09:33:33AM +0200, shaul wrote:
How can I fixed it ?
Package: apt
Version: 0.3.11.1
[09:21:40 shaul]# apt-get install xbooks
Reading Package Lists... Done
Building Dependency Tree... Done
1 packages upgraded,
On Wed, Sep 29, 1999 at 10:27:43AM +, Marcin Owsiany wrote:
On Tue, Sep 28, 1999 at 09:41:26PM -0500, Ashley Clark wrote:
On Tue, 28 Sep 1999, Marcin Owsiany wrote:
the way to solve the problem would be to create a package called e.g.
secure-kernel, which would depend on the most
On Wed, Sep 29, 1999 at 10:46:20AM +, Marcin Owsiany wrote:
I guess this kind of kernel packages would be for people quite concerned
about security but also quite lazy :)
Also if you administer a lot of boxes, and if they work ok with the default
kernel you will find it _a lot_ more
On Mon, Sep 27, 1999 at 09:17:09PM -0400, Chris Ruvolo wrote:
At 11:02 PM 9/26/99 +0300, you wrote:
This is my first try at more than swap and /.tiny /boot, giant
/home, right? Anyone feel like helping?
I don't think a separate partition for /boot would be a good idea. /boot
is the
Noah, you *do* know that you need to send output from your turntable through
an amplifier with a phono stage or an external phono stage for it to be of
any useful strength, right? :)
As for software that won't chew CPU or segfault, I don't know. Post back to
the list whatever software you do end
Ok, I removed the paths from /etc/pam.d/kbdrate -- should I file a bug
against kbdrate with the new info? Or not?
Thanks Peter! ;)
On Tue, Sep 28, 1999 at 09:39:58AM +0200, peter karlsson wrote:
Seth R Arnold:
Peter -- even if the paths are correct? I am a little reluctant to play
around
And, the non-debian option --
/usr/src/linux/.config has all the options too, if you ran
make [menu|x]config. :)
On Sun, Sep 26, 1999 at 04:23:38PM -0500, Gregory T. Norris wrote:
If it's either a Debian-supplied kernel, or one in which make-kpkg was
used to create an installable debfile, you
From man tar:
--exclude FILE
exclude file FILE
-X, --exclude-from FILE
exclude files listed in FILE
those helpful people at gnu! ;)
On Mon, Sep 27, 1999 at 01:37:59PM +1300, [EMAIL PROTECTED] wrote:
Hi
what is needed in order to tell tar not to
Alexandre, look into the HOWTOs, they are fairly extensive. Everything you
will need to know is in those. :)
To get you started, you need the ipchains command. man ipchains might be
enough documentation for you.
Have fun :)
On Sun, Sep 26, 1999 at 11:58:46PM +0200, Alexandre ARNOUD wrote:
Hi,
Aug 30 05:22 Kraftwerk-airwaves.mp3
See that file --exclude ? Wierd voodoo. All the same, it didn't copy
Kraftwerk-Spacelab.mp3.
Hmm.
On Sun, Sep 26, 1999 at 11:27:44PM -0700, George Bonser wrote:
On 27-Sep-99 Seth R Arnold wrote:
From man tar:
--exclude FILE
exclude
Jonas, what happens if you leave off the root= bit?
I am getting at, boot using nothing but the rescue disk. It ought to be
enough to get you to a prompt, from there you can mount /mnt /dev/hda7 and
play around with things in there
good luck
On Mon, Sep 27, 1999 at 08:32:06AM +0200, Jonas
On Mon, Sep 27, 1999 at 09:00:08AM +0100, Mario Jorge Nunes Filipe wrote:
Can anyone give me a hint on how to recover the damn file.
I wish I could help you, but I haven't any experience with this... But, I
thought I would take the time to suggest the 'supertar' products, such as
lonetar, or
On Mon, Sep 27, 1999 at 10:27:31AM +0200, Andrew Hately wrote:
# ( cd / ; tar cf - bin boot dev lib sbin usr var ) | tar xf -
xfp -
--
Seth Arnold |
Tom, if you throw things in /usr/local, apt (as well as dpkg, dselect,
etc..) promise to leave those things alone. The gnome configure script
probably supports --prefix=/usr/local -- that doesn't mean it will be
seamless, but it shouldn't be too bad. :)
On Mon, Sep 27, 1999 at 07:57:38AM -0400,
Chris -- try giving eth0 an IP address. I *think* that *may* have helped me.
Also, replace dhcpcd with dhcp-client-beta. See what that does. :) Try that
one first. :)
On Mon, Sep 27, 1999 at 12:33:06PM -0400, Chris Ruvolo wrote:
Hello all..
I have a slink box up and running pretty well with
On Mon, Sep 27, 1999 at 10:09:13PM +0200, peter karlsson wrote:
Jonas Steverud:
(none) login: root
login[10]: PAM unabvle to resolve symbol pam_sm_authenticate
login[10]: PAM unabvle to resolve symbol pam_sm_setcred
login[10]: PAM unabvle to resolve symbol pam_sm_authenticate
On Tue, Sep 28, 1999 at 12:19:11AM +0300, Martin Fluch wrote:
MMX 233) I had a look at debian/README.source-depends (can anybody tell
me, why README files are called README? :-), installed the missing
Well, the name readme is a command, telling you to read whatever 'me' is.
That part isn't so
Steve, I can let you know what I have learned --
the 3c59x.c file included with the kernel (even 2.2.12) is old and out of
date. You need to go to Donald Becker's webpage (cesdis.gsfc.nasa.gov, iirc)
and download the 0.99L or newer version of the 3c59x.c file, replace the
3c59x.c file that comes
When i had my S3 Virge/vx, I never once got the SVGA server to work. Try the
s3v server. And, I think the fb server requires kernel 2.2.x or so.
On Sun, Sep 26, 1999 at 04:53:58PM +0100, Nuno Carvalho wrote:
Hi,
I'd an S3 Trio3D2x AGP 86C362 graphic card and was working fine on hamm
with an
On Sun, Sep 26, 1999 at 09:19:57AM -0700, Greg Heather Vence wrote:
Hey all,
Enlightenment is working but complains that it can't find the ESD sound
server or run it.
I've installed the esound package...
What's next?
Installing sound support, either alsa or oss. You might need to
On Sun, Sep 26, 1999 at 09:58:48AM -0700, Eric Hanchrow wrote:
Now, here's the kicker: the problem goes away if I run `tcpdump': I do
tcpdump
ping blarg.net
and `ping' responds correctly. I can then kill `tcpdump', and until
the next time I boot, the network works fine.
Todd, here are two lines from mine that make sense for everone.
deb http://non-us.debian.org/debian-non-US unstable/non-US main contrib non-free
deb http://http.us.debian.org/debian unstable main contrib non-free
I just cut this from someone's example on the list a month ago or so.
This is for
On Sat, Sep 25, 1999 at 02:13:15PM +1200, Tim Thomson wrote:
I was thinking it was just something like that. I've been meaning to learn
perl for awhile. Any good starting points, apart from going through
source code? Thanks for the link to that awk link, looks good.
This is a bit off-topic at
Such things do exist. If your needs are minimal, telnet *might* be enough.
You can telnet localhost 80 and see what it does.
Netcat, on the other hand, is exactly what you are looking for, and will
probably do a wonderful job.
On Fri, Sep 24, 1999 at 10:41:06PM -0400, Kristopher Johnson wrote:
Paul, it is likely that your monitor is running in interlace mode to get
that resolution.
I think the right way to fix it is to look up in the manual (or the ini
file, if it is legible) the horizontal refresh, verticle refresh, as well as
what your video card can do, and using XF86Setup or
Ok guys -- I have a second monitor, and wouldn't mind buying a second video
card if it would allow me to use two monitors at the same time. I don't know
where to start looking for information on this.
My current video card is an AGP ATI [EMAIL PROTECTED] I am running XFree86
Mach64
3.3.5-1.
Do
In the future, some things that will help if you must powerdown cold...
swapoff -a
sync
I do not know if the swapoff -a helps anything or not. I do it all the same.
:) But, does anyone know a way to umount / and so forth before powering off?
On Fri, Sep 24, 1999 at 08:27:57AM +1300, [EMAIL
Bill, rumor has it from the maintainer that he uploaded .7 to the servers
two weeks ago, or more (for unstable) -- but I have yet to see it. (Well,
apt has yet to see it. :)
I *think* we are waiting on the ftp maintainer to move it out of incoming
into another spot.
On Thu, Sep 23, 1999 at
On Thu, Sep 23, 1999 at 12:42:28PM -0700, Wim Kerkhoff wrote:
On 24-Sep-99 Seth R Arnold wrote:
Bill, rumor has it from the maintainer that he uploaded .7 to the servers
two weeks ago, or more (for unstable) -- but I have yet to see it. (Well,
apt has yet to see it. :)
Yep, you're right
.
Regards,
Todd
At 07:13 PM 9/23/1999 -0700, Seth R Arnold wrote:
On Thu, Sep 23, 1999 at 12:42:28PM -0700, Wim Kerkhoff wrote:
On 24-Sep-99 Seth R Arnold wrote:
Bill, rumor has it from the maintainer that he uploaded .7 to the
servers
two weeks ago, or more (for unstable
I haven't tried this myself... but, I seem to recall that if you pass linux
single on the boot line (at the lilo prompt, etc..) it will boot into a
single-user mode; within that you should be able to passwd root.
If you have shadowpasswords installed, getting a crack to work will be very
JY, chances are good you need to install xlib6g-dev as well.
And, a snippet from my machine...
amidala:/home/sarnold/aterm-0.3.6# dlocate Xaw
nextawg: /usr/X11R6/lib/neXtaw/libXaw.so.6
xaw3dg: /usr/X11R6/lib/Xaw3d
xaw3dg: /usr/X11R6/lib/Xaw3d/libXaw.so.6
xaw3dg: /usr/X11R6/lib/libXaw3d.so.6.1
On Fri, Sep 24, 1999 at 10:24:45AM +0300, virtanen wrote:
On Thu, 23 Sep 1999, Aaron Stromas wrote:
After seeing the discussion concerning ttf fonts and xfstt Idecided to try
this thing as well.
There was no problem to put the fonts in their position and reading the
FAG doc...
But if
On Fri, Sep 24, 1999 at 09:34:11AM +0200, Jean-Yves BARBIER wrote:
Unfortunately, it doesn't work!
I was given the same advice some minutes ago, and installed:
xlib6-altdev, xaw95, xaw3d, libc5-altdev, xlib6, libc5, nextawg
(xlib6g is already installed)
BUT still the same error!
Drat.
On Fri, Sep 24, 1999 at 07:42:21AM +, Mark Phillips wrote:
Well my /etc/hosts.allow didn't have any lines in it so I added
ALL: LOCAL 192.168.1.255
then did /etc/init.d/netbase restart and everything now works. So
thank you!
I must confess though, it seems a bit like black magic
Alberto, I am going to guess you are upgrading from slink to potato. I am
also going to guess you ran apt-get update;apt-get upgrade' rather than
'apt-get update;apt-get dist-upgrade'.
If I am wrong, tell us as much. :)
On Fri, Sep 24, 1999 at 11:28:46AM +0200, Alberto Maurizi wrote:
dselect. Don't know about the method dselect
use but it worked well till yesterday.
On Fri, 24 Sep 1999, Seth R Arnold wrote:
Alberto, I am going to guess you are upgrading from slink to potato. I am
also going to guess you ran apt-get update;apt-get upgrade' rather than
'apt-get
IIRC, the * means it set that image as the one to boot by default.
Try posting us your /etc/lilo.conf file, and describe your booting setup a
bit, and lets see what we can do. :)
On Fri, Sep 24, 1999 at 12:44:22PM -0400, Daniels, Craig wrote:
Hi,
I was changing kernels from 2.2.10 to 2.2.12
I do not think wmaker allows switching workspaces by moving the mouse. It
*does* allow you to drag windows between the desktops... and it also allows
you to click on the little buttons on the clip.
btw -- try wmakerconf. It seems nice too. :)
On Fri, Sep 24, 1999 at 03:16:45PM -0400, Dpk wrote:
Yup --
sarnold:/home/sarnold# apt-cache search ssh2
ssh2 - a secure replacement for rlogin, rsh, and rcp
:)
On Fri, Sep 24, 1999 at 06:18:08PM -0400, Rob Mahurin wrote:
On Wed, Sep 22, 1999 at 02:06:38AM -0700, Seth R Arnold wrote:
network. I use ssh2 to login to sarnold, and export DISPLAY
Can you init 1 or init 0?
On Thu, Sep 23, 1999 at 03:26:17PM +1300, [EMAIL PROTECTED] wrote:
Hi
I am trying to shutdown a server and it says it is already shutting down...
i discovered a shutdown process but it seems to be dead and i cannot kill
it off with kill -9.
ie
993 ? D
If you built your kernel yourself, it should be installed into
/lib/modules/version/ipv4/ip_masq_ftp.o
In which case, you can modprobe ip_masq_ftp to get it to go.
:)
On Thu, Sep 23, 1999 at 11:02:13AM +0200, Robert Varga wrote:
How can I install the masquerading module for FTP
On Thu, Sep 23, 1999 at 11:11:45AM +0200, Robert Varga wrote:
On Thu, 23 Sep 1999, Seth R Arnold wrote:
If you built your kernel yourself, it should be installed into
/lib/modules/version/ipv4/ip_masq_ftp.o
In which case, you can modprobe ip_masq_ftp to get it to go.
So I do not need
wouldn't prevent
xfstt from working, but one never knows.
hth :)
On Thu, Sep 23, 1999 at 06:39:38AM -0400, Aaron Stromas wrote:
seth,
i've read and followed the faq before i asked for advice. the xfontsel
-pattern
found no matches. xcoral is not on my system - what is it?
-a
Seth R
Just a quick warning -- killall functions quite nicely under linux. But,
don't try it under other versions of unix as superuser, since it often does
kill*all*.
As for the services...
discard throws away everything that hits it -- /dev/null ported to tcp/ip
sockets. :) daytime tells the date and
Aaron, it isn't the fault of windows, nor the fault of linux. If I recall,
there is a FAQ at www.winamp.com that describes this situation. Basically,
your PCI bus gives the cycles to the videocard when it needs them, and lets
the chips fall where they may -- which means skipping during audio
://www.lwn.net/1999/0218/a/deb-ftpd.html
paul
-Original Message-
From: Seth R Arnold [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 21, 1999 1:46 PM
To: debian user list
Subject: Re: proftp where to I find it
Look for proftpd.
:)
On Tue, Sep 21, 1999 at 10:12:50AM -0500, Jim
On Wed, Sep 22, 1999 at 10:45:35AM +0930, Mark Phillips wrote:
Hi,
I went to use my floppy and noticed that the light is perpetually on.
[...]
I tried rebooting. The floppy light comes on straight away (and stays
on) and the system tries to boot from the floppy but fails, so goes on
to
Is perl-5.004-suid installed on one and not hte other?
On Wed, Sep 22, 1999 at 12:40:34PM +1000, Andrew Pollock wrote:
Hi,
We've got two relatively new slink boxes, both running 2.2.12, and I've got
a setuid Perl script that doesn't work on one, but does on the other.
Permissions are the
On Tue, Sep 21, 1999 at 08:01:29PM -0700, Mark Wagnon wrote:
On Tue 09/21/99 09:45PM, Phil Brutsche wrote:
Corel's been trying to release a beta of their distro under terms that
violates the GPL (no redistribution what-so-ever, etc). Needless to say,
a real mess has come about it. The
On Wed, Sep 22, 1999 at 03:13:12PM +1300, [EMAIL PROTECTED] wrote:
Can someone properly explain to me the differences between how a process
starts up as a daemon as apposed to a process which starts up via initd as
i am a little unsure.
Well, programs that init starts normally ARE daemons.
My ssh2 (installed from non-us.debian.org) and ssh have the value of 20 --
which is what nearly everything else has. Heheh.
I have inserted my ssh startup script as well (except I deleted the exit 0
near the top of the thing -- I don't want ssh if I have ssh2, but it is
easier on the
I got the impression that Richard was looking for a nicer way of doing this;
if linux is going to be wierd about its network interfaces, then perhaps
there is a nice way to circumvent it without too much work. :)
On Wed, Sep 22, 1999 at 01:28:18AM -0400, William T Wilson wrote:
On Tue, 21 Sep
On Tue, Sep 21, 1999 at 10:52:50PM -0700, Mark Wagnon wrote:
On Wed 09/22/99 01:39AM, Peter Mickle wrote:
does anyone have any recommendations for a page layout/type formatting,
including both text and graphics (photos/drawings/manipulated text)
application? quark-like?
How about
On Wed, Sep 22, 1999 at 04:08:44PM +1000, Marc-Adrian Napoli wrote:
Hey Seth. :)
Just a quick question..
On Wed, Sep 22, 1999 at 03:13:12PM +1300, [EMAIL PROTECTED] wrote:
Can someone properly explain to me the differences between how a process
starts up as a daemon as apposed to a
On Wed, Sep 22, 1999 at 05:01:42PM +0930, Mark Phillips wrote:
Thanks for the replies!
That usually means the drives ribbon cable is backwards. make sure
the red side of the ribbon is aligned with pin one on both ends.
I switched the cable round and now it works! Thanks!
My box is
Well, if all else fails, you could have it run a script that will killall
wmaker. Perhaps that isn't so ugly.
But probably it is ugly. I do hope someone knows a nicer way, but the way it
exits (on my system in /etc/X11/WindowMaker/menu) looks like it is built
into the root menu in a very
Shao, a thought just struck me.
You could use symlinks to move your email folders around a bit -- so mutt
only sees a symlink to them. The mutt on my redhat server (blasted...:)
doesn't lstat() the symlinks, it just stat()s them. This might be the thing
you need, since procmail should be smart
Art, check the bug servers -- there might be more information on this.
It might not hurt though to post the surrounding ten lines or so, maybe it
is something obvious. :)
On Wed, Sep 22, 1999 at 02:59:54AM -0600, Art Lemasters wrote:
---
Ok, time for another question. :)
I have two potato machines; amidala has monitor, keyboard, all the usuals.
sarnold has no such nice features. It only knows about the world via the
network. I use ssh2 to login to sarnold, and export DISPLAY=amidala:0.0 --
from there, I traditionally like to run
Heh, 'lite' and {KDE, StarOffice, Netscape, GIMP} do not seem to be words
that I would associate... :) KDE takes up much space and depends on qt,
netscape, well, I don't know what it takes, StarOffice seems to take over
141 megs on my system, the installer is 80 megs, GIMP depends on gtk... It
all
On Wed, Sep 22, 1999 at 03:21:41AM -0600, Art Lemasters wrote:
On Wed, Sep 22, 1999 at 02:00:58AM -0700, Seth R Arnold wrote:
Art, check the bug servers -- there might be more information on this.
It might not hurt though to post the surrounding ten lines or so, maybe it
is something
You would need some programs with names such as:
ne2000.exe (or whatever driver is needed for the card vmware emulates)
lsl.exe
odi.exe
in addition to the netware client programs. The only way to legally get the
netware client programs is from novell, if you happen to own a server. :)
However, I
'ssh' is secure shell. Think encrypting all the data that passes between
two computers.
It does more than that, but that is what it is known for. You can tunnel any
other connections through it, such as X, whatever. Encrypted, authenticated.
Its nice.
http://www.ssh.fi/sshprotocols2/ has more
On Wed, Sep 22, 1999 at 01:21:55PM +0200, Benak Istvan wrote:
Seth R Arnold wrote:
You would need some programs with names such as:
ne2000.exe (or whatever driver is needed for the card vmware emulates)
lsl.exe
odi.exe
in addition to the netware client programs. The only way
On Wed, Sep 22, 1999 at 01:51:34PM +0200, Manuel Arenaz Silva wrote:
I have installed telnetd via dpkg --install and, after that, I have
rebooted the machine. Nevertheless, the daemon was not started.
[...]
where de daemon telnetd does not appear. What else do I have to
configure in order to
Aaron, there is a bit more involved than just adding it to the config files.
here is the relevant section snipped from /usr/doc/xfstt/FAQ.gz:
1.1 How do I test it?
mkdir /usr/share/fonts/truetype and put some *ttf fonts there, now run
make xfstt make install
xfstt --sync
Satelites have more latency than other services -- so, ftp would run very
nice and quick and all, but something such as quake would be painfully slow.
On Wed, Sep 22, 1999 at 05:30:00AM -0700, Kenneth Scharf wrote:
Has anyone tried using direct-pc with Linux?
(thats the satellite inter-net
Hello there.
Can someone explain to me what this message means? :)
amidala:/var# apt-get upgrade
Reading Package Lists... Done
Building Dependency Tree... Done
The following packages have been kept back
gimp1.1 login python-base python-tk shellutils wmaker
0 packages upgraded, 0 newly
Marc-Adrian, I think this can best be described by the philosophy of the
various operating systems.
Micros~1's Vision Statement is, A computer on every desktop. They have
darn near nailed that one. Part of the remaining half of US households
without computers includes the elderly, the poor, the
On Tue, Sep 21, 1999 at 04:29:18PM +1000, Shao Zhang wrote:
If I press c for change folder and followed by 4 TABs, then the first
TAB mutt will give me a default folder with new msg in it, the second
TAB mutt will give me a complete name of that folder, and the third TAB
If memory serves me, putting the package on hold in dselect should be
enough. (= key)
On Tue, Sep 21, 1999 at 10:21:15AM +0200, Steeve Lennmark wrote:
Hi, Can I somehow say to apt that i dont want to upgrade a package, EVER?
--
Debian GNU/Linux - The Choice Of A GNU-Generation.
___ ___
Benak, try looking in your /etc/hosts.allow and /etc/hosts.deny file to see
if you are denying access in there... also check output from:
ipfwadm -l -I
ipfwadm -l -O
ipfwadm -l -F
(anyone know the equivalent ipchains commands?)
Also, try checking the output of route to ensure that your routing
Manuel, try:
apt-get update;
apt-get install telnetd
Of course, this assumes your setup is recent enough for apt-get to work. If
your box is an older box based on an earlier version of debian, this might
not work -- so try using dselect with your distribution CDs to find the
telnetd package.
Look for proftpd.
:)
On Tue, Sep 21, 1999 at 10:12:50AM -0500, Jim Ruby wrote:
Hi, where do I find proftp if it is better and easier then ftpd.
I see ftpd is a deb package, but I can't find proftp.
Thanks.
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
--
Seth
The esound enlightened sound daemon offers this sort of thing in software. I
think the commercial version of oss/linux (www.opensound.org, right?) offers
this ability too. And, if you have a nice new pci soundcard that does this
stuff natively, the proper drivers should make it go quite nicely,
Hola to the List once again.
Quick query -- I am fairly taken by Eterm (I don't know how to procede with
aterm, the Unix98 ptys scare me a bit -- any hints on that?) and its
transparency. So, I started thinking about how nice it would be for netscape
to be transparent too.
Does anyone know of a
1 - 100 of 262 matches
Mail list logo