Hi all,
I just updated to buster from stretch (no problems).
I have a desktop with two monitors. I have the basic power saving
setting that blanks the screens after 5 minutes.
When I wake the screens, the primary display is offset to the left by
about 2 inches, leaving a black band along
On Tue, Apr 02, 2002 at 10:10:52AM -0500, Shawn McMahon wrote:
Well, you could use Ghost or DriveImage.
Or PartImage: http://www.partimage.org
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Tue, Mar 26, 2002 at 10:43:43AM +, Rory Campbell-Lange wrote:
Secondly, I'd like to make something like the line below work in bash.
Exim complains in this case of not finding a message with id -.
cat /tmp/e | exim -Mrm -
have a look at the xargs program. You should be able to
cat
On Tue, Mar 26, 2002 at 10:11:20AM -0700, Randolph S. Kahle wrote:
In my Potato installation, I place a call to hdparm in rc.local.
In my new Woody installation, I cannot find rc.local.
What is the correct place / file to use for boot-up configuration /
control commands?
I just put this
On Thu, Mar 21, 2002 at 12:59:09PM +0200, janet wrote:
SMTP server I must use to send my email requires authentication.
snip
Is there possibly some easier solution?
You could just stop using this server and send mail direct from your own
machine. Unless theres some firewall in the way then
On Thu, Mar 21, 2002 at 09:34:33AM -0300, Jeronimo Pellegrini wrote:
Hmmm I feel sure that when I tried this a couple of years ago I ran into
the DUL list - many e-mails bounced because I wasn't registered with
them. Has that problem gone away?
No, it didn't go away... I tried to send
On Thu, Mar 21, 2002 at 10:08:48AM -0600, Ronneil Camara wrote:
And also, I am doing the traditional way of compiling the kernel, make
menuconfig, make dep clean modules_install bzImage
Will this work on debian?
It'll work but you might find it easier to:
make menuconfig
make-kpkg
On Thu, Mar 21, 2002 at 11:00:25AM -0600, Cheryl Homiak wrote:
Hi Phil and list!
I discovered that my com ports work as root, but I'm not sure how to get
access
myself. My ttySx are currently set for root and dialout, and this isn't a
problem in linux since i am a member of dialout. However,
On Thu, Mar 21, 2002 at 03:11:47PM -0800, justin cunningham wrote:
Hello, I am trying to compile a custom 2.4.18 kernel and keep getting
this error:
make[2]: Leaving directory
`/usr/src/kernel-source-2.4.18/arch/i386/boot'
make[1]: Leaving directory `/usr/src/kernel-source-2.4.18'
touch
On Tue, Mar 19, 2002 at 08:44:23PM -0800, Bill Moseley wrote:
I think I need soundcore, but I'm not clear what kernel config I should
use to build it. I'm not clear if I need ALSA or OSS in addition.
fgrep SOUND /boot/config-2.4.17 | grep -v ^#
CONFIG_SOUND=y
Thats why you dont have a
On Wed, Mar 20, 2002 at 07:07:38AM -0500, stan wrote:
Soes this thread imply that xawtv, in full screen mode, is able to
automagicly swtich X
resolutinos such that it does give full screen, instead of just centering
the TV image
on the display with a black border around it?
Yes it can.
On Wed, Mar 20, 2002 at 07:56:16AM -0800, Bill Moseley wrote:
Oh, ok, so that's soundcore. But is that a problem -- will startup
scripts expect soundcore to be a module?
I dont think it'll be a problem. I have a module so i wouldnt really know
though. I dont think I have any audio related
On Wed, Mar 20, 2002 at 09:08:17AM -0700, Phil Reardon wrote:
I installed dosemu on my potato box to try to help Cheryl, but it did not
give me any man or info pages. Who maintains dosemu, anyway?
Herbert Xu [EMAIL PROTECTED]
Looks like there is some info in /usr/share/doc/dosemu
On Wed, Mar 20, 2002 at 09:33:59AM -0600, Elizabeth Barham wrote:
Hi,
Is there an easy method to re-install a package? I rebooted my machine
and apache is segfaulting right as it starts up. Other applications
are running fine, even Tomcat which taxes memory.
apt-get install --reinstall
On Wed, Mar 20, 2002 at 08:32:11AM -0800, Michael Montagne wrote:
What is PSM for Galeon (mozilla?)?
mozilla-psm - Mozilla Web Browser - Personal Security Manager (PSM)
its the https/ssl component.
there will be much overwriting)? I've installed everything else with
apt-get so I'd like to
On Wed, Mar 20, 2002 at 09:00:43AM -0800, Sean 'Shaleh' Perry wrote:
Or perhaps /tmp is a culprit? On my system / looks like this:
3.4M/bin
1.2M/boot
26k /dev
4.8M/etc
8.4M/lib
2.8M/sbin
my /lib is 35M. Including about 5M of modules for each kernel image.
I
On Wed, Mar 20, 2002 at 11:42:23AM -0800, Jim McCloskey wrote:
Does anyone know what caused the change or how I might get the old
behaviour back?
Its possible that gnome is starting up before sawfish has finished loading
so gnome sees no window manager at all.
how do you start X ?
perhaps
On Wed, Mar 20, 2002 at 02:12:00PM -0700, dave mallery wrote:
could you please tell me where to find the genlocal thingie he mentions.
i have the perl local problem since my woody upgrade last nite.
he means /usr/sbin/locale-gen it's in the locales package.
On Sun, Mar 17, 2002 at 05:07:01PM +0100, Joerg Johannes wrote:
If I'm right, Modelines are not necessary any more with XF86-4.1 .
That's right, X now has a set of vesa display modes built in, so you dont
need to set up common modes.
So, how can I get this (from the man page):
Modeline
On Tue, Mar 19, 2002 at 08:52:53PM +0100, Mirek Dobsicek wrote:
Hi all,
I'm looking for some readable documentation about
ethernet frame. I've looked at google, but there
is too much of links, and as I'm beginner ... cant choose
Must be something wrong with your googling technique..
On Fri, Mar 15, 2002 at 12:25:31AM -0500, Chris Hilts wrote:
On Thu, Mar 14, 2002 at 08:37:06PM -0800, Craig Dickson wrote:
(and to know that they're in maildir format), then run all your old
messages back through procmail again.
I believe procmail comes with a utility called 'formail'
On Mon, Feb 25, 2002 at 12:59:15PM -0800, Craig Dickson wrote:
begin Alan James quotation:
Are you still using MH folders ? How'd you get mutt to show a list of MH
folders with the new message count for each ?
I converted my MH folders to maildir and now I use that. Mutt seems
I am not sure how to solve this with DNS. The DNS server should return the
new domain name too, not only it's ip.
You cant. its the browser that asks the webserver for that domain.
Your fighting a losing battle here.
You'll have to ask that your web host accepts the alternative name for your
On Wed, Mar 13, 2002 at 05:16:14PM +0100, Christian Schoenebeck wrote:
I already tried APM, then APM with 'use real mode APM BIOS call to power off'
option and finally I tried ACPI instead of APM - didn't make any change.
Does anybody have an idea?
Sorry if this is a stupid question..
Do
On Wed, Mar 13, 2002 at 02:36:28PM -0500, Chris wrote:
You are kidding right? IRC is extremely inappropriate for a child to
use, period. You are way off base, your perspective is badly skewed
and I fear for the safety of your daughter online. I wish her the
best of luck with such poor
This bug is fixed. This is no longer an issue.
Please dont reply to this thread, or at least dont CC every other list about
it..
Yes, I was foolish enough to group reply already, sorry.
You can get the get the details of this mess from :
On Mon, Mar 11, 2002 at 04:53:52PM -0600, Christopher M. Jones wrote:
I'm compiling for a K7/Athlon/Duron system. As far as I can tell, -all-
modules come up with unresolved symbols. In other words, any module I try to
load comes up with unresolved symbols, whether part of the kernel, or
On Tue, Mar 12, 2002 at 11:24:22AM +, Alan James wrote:
This may be a daft question but when you load modules are you using inmod or
Sorry I meant insmod there of course. Still modprobe is the one to use.
On Mon, Mar 11, 2002 at 10:20:28AM -0500, Bannerman, Israel wrote:
To all:
I recently just installed Mutt 1.3.27-4 and I want pull my email off of an
Exchange server with IMAP enabled. How would I configure Mutt for this and
what would be the proper steps or procedures in configuring Mutt
On Mon, Mar 11, 2002 at 11:28:18AM -0500, Bodnyk, Bruce W wrote:
I installed Debian Linux 2.2 on a machine at home that I want to configure
as a firewall. I don't have a monitor for this machine so I've been swapping
my monitor between this machine and my NT workstation. I do have an old
ASCII
On Mon, Mar 11, 2002 at 01:23:31PM -0500, timothy bauscher wrote:
I have run xf86config and xf86cfg with different resolutions and color
depths, but I still end up with the same error.
Any help would be appreciated, I have run out of ideas.
Make sure you have xserver-xfree86 installed.
On Mon, Mar 11, 2002 at 02:04:33PM -0500, Rick Pasotto wrote:
On Mon, Mar 11, 2002 at 12:30:09PM -0500, Kurc, Marcin A. wrote:
add the following to your lilo.conf
append = console=ttyS0,9600
or whatever port you connecting to
then just run minicom
Why would you run minicom? *How*
On Thu, Mar 07, 2002 at 07:25:49AM -0800, John Shepherd wrote:
All,
. I previously listed my machine's local network
IP address (192.168.1.1) as the gateway address
when setting up the network. I left gateway
address blank this time.
That was probably it, not that I read your previous
On Thu, Mar 07, 2002 at 07:43:23AM -0800, John Shepherd wrote:
Does the debian distribution include a
character-based IRC client? If so, what is it
I like xchat-text, I'm not sure which debian branch you need to be running to
get it though.
It helps if you've run the gui xchat first to
On Tue, Mar 05, 2002 at 10:06:22PM -0600, Ron Johnson wrote:
Not to US, but just out in _EVERY_ direction, since that alien civ
doesn't know in what direction the receiving civ is.
apt-get install alien
Sorry I had to ;-)
On Tue, Mar 05, 2002 at 02:44:04PM +0100, Francisco M. Marzoa Alonso wrote:
So the real questions are... ¿What can I do to get my PS2 mouse working below
Quake using SVGAlib? ¿Whan do I need to get Open GL acceleration with my
Voodoo under Quake?
I assume that if you get it working under X
On Sun, Mar 03, 2002 at 08:19:59PM -0600, [EMAIL PROTECTED] wrote:
Same here. Still no answer... :(
use sudo, its easier.
install sudo, edit /etc/sudoers to make yourself a sudoer.
then you can
$sudo kreatecd
Password: enter your user password not roots
Tada it works.
sudo seems to keep the
On Mon, Mar 04, 2002 at 03:05:10PM -0500, sam wrote:
i am currently using Debian, how do i get that offical Powered By Debian logo
to put in my web?
http://www.debian.org/logos/
On Fri, Mar 01, 2002 at 05:00:28PM +0100, Sebastiaan wrote:
Hello,
I have tried various variations in the zone files, like:
www IN CNAME www.me.provider.com.
but I have not gotten it to work.
That should work, sort of. Assuming the ret of bind is set up ok
then resolving
On Fri, Mar 01, 2002 at 10:14:23AM -0500, stan wrote:
How can I configure X to work with the new display?
Assuming X4, dpkg-reconfigure xserver-xfree86
Then you can tell it that you have an lcd display and choose the relevant
resolution. With luck you might end up with sub-pixel-antialiasing
On Thu, Feb 28, 2002 at 09:29:59PM +0100, Oliver Doepner wrote:
Hi,
is there any online resource that documents the (current) status of the
woody freeze process?
Debian Weekly news is a great resource.
http://www.debian.org/News/weekly/
The last few weeks have had interesting news about
On Thu, Feb 28, 2002 at 03:43:00PM -0500, Daniel Whelan wrote:
If anyone has any ideas, I'd appreciate the help. Thanks!
Error messages from the failures might help. look in /var/log/apache/error.log
If the configs are the same it might be the locations of the cgi scripts
If its sometimes this
On Tue, 26 Feb 2002 20:19:10 -0600 (CST)
Cheryl Homiak [EMAIL PROTECTED] wrote:
I am using the form
ssh [EMAIL PROTECTED]:filename user2ipaddress:filename and have also tried
I dont think you can do that. I never made it work anyway. One side of the scp
expression has to be local it seems.
On Wed, 27 Feb 2002 08:38:11 +
Alan James [EMAIL PROTECTED] wrote:
On Tue, 26 Feb 2002 20:19:10 -0600 (CST)
Cheryl Homiak [EMAIL PROTECTED] wrote:
I am using the form
ssh [EMAIL PROTECTED]:filename user2ipaddress:filename and have also tried
I dont think you can do that. I never
On Wed, Feb 27, 2002 at 09:59:02AM +, Martin Price wrote:
Thanks for the suggestions, I'll try them tonight when I get home (I too
am an NTL sufferer - I feel your pain).
Then its ntls fault. must be.
look here for the alternate proxies
On Wed, Feb 27, 2002 at 10:43:26AM -0500, Sheldon Lee-Wen wrote:
I do have the rgb.txt file
and the symlink in /usr/X11R6/lib/X11 ?
I think I should be using Intellimouse or Auto for my usb mouse however
debconf doesnt offer me the option.
The relevant section in /var/cache/debconf/config.dat is :
Name: xserver-xfree86/config/inputdevice/mouse/protocol
Template: xserver-xfree86/config/inputdevice/mouse/protocol
Value:
On Wed, 27 Feb 2002 23:06:58 +0100
Mirek Dobsicek [EMAIL PROTECTED] wrote:
Good afternoon,
I'm looking for some good VRML browser under linux. In school I have
lessons from Multimedia and virtual reality. I'm supposed to write
interactive(javascritp driven) multiuser virtual world.
Is
On Mon, 25 Feb 2002 16:43:15 +0100
Pontus Edvardsson [EMAIL PROTECTED] wrote:
Hi,
I'm struggling with the secondary head of my Matrox Millennuim G550. I want
to output that to my TV. I understand Matrox does not support this, still,
has anyone got it working somehow?
Thanks for any
On Tue, Feb 26, 2002 at 11:59:22AM -0300, Marcelo Chiapparini wrote:
Hello,
I am running woody + gnome 1.4+ sawfish. I would like to know if there exists
a
clever way of shutdown the system than opening a shell, login as root and
type
shutdown -h now.
Thanks in advance
If you are
On Wed, 27 Feb 2002 01:25:31 + (GMT)
Martin Price [EMAIL PROTECTED] wrote:
It's the stock 2.2.19pre17 kernel. /proc/sys/net/ipv4/tcp_ecn doesn't
exist, but I wonder if it could be any of the other settings. I have to
admit I'm completely out of my depth once I get to messing around in
On Mon, Feb 25, 2002 at 09:53:30AM -0600, Corey Halpin wrote:
Ok, it's become a mission now.
Before I leave .edu, I want to a) find a beer that I like, and b) have a
set
of procmail filters such that I don't get any ugly stupid email.
I'd welcome pointers for both. :-)
More to
On Sun, 24 Feb 2002 21:36:18 -0500
Bob Thibodeau [EMAIL PROTECTED] wrote:
I thought I'd try Sylpheed after seing mention of it on this
list, but never felt like configuring another client. Now that
I've read it doesn't play nice with mutt, I'll just remove it.
I've got it working reasonable
On Mon, 25 Feb 2002 10:44:30 -0800
Craig Dickson [EMAIL PROTECTED] wrote:
I found it a major annoyance, but maybe I just receive a lot more mail
than you do.
Probably, ive just joined this list, and I've more than doubled my daily mail.
To me, also, there was the basic question, why do I
On Tue, 26 Feb 2002 00:44:41 +0100 (CET)
Ondrej Zima [EMAIL PROTECTED] wrote:
BTW: Ickle (in near future) can send SMS :-)
It does already doesnt it ? Ah, wait, I am using the cvs version..
On Mon, 25 Feb 2002 16:52:33 -0700
darrell dupas [EMAIL PROTECTED] wrote:
i give this tip all the time because i find xdm and gdm annoying when
trying to configure X
This might be a sid/woody thing but after gdm dies about 5 times in a short
period of time it stops trying to load it, so
On 25 Feb 2002 23:26:48 +
Patrick Kirk [EMAIL PROTECTED] wrote:
Hi all,
I have added a command to run a xterm to my .xsession just in case I
hose my settings to the point where that xterm will be all that stands
between me and disaster.
what about virtual consoles ? ctrl+alt+Fsomething
On Thu, Feb 21, 2002 at 09:49:18PM -0800, Ross Boylan wrote:
I've had mailman on my system for quite awhile, but only now am
attempting to use it. Following the Debian README, I have tried to
access it with
http://localhost/cgi-bin/mailman/listinfo
but I get a 404 error (file not found).
On Wed, Feb 20, 2002 at 03:16:15PM +0100, Tony Crawford wrote:
By experimenting, I found out that the long lookup occurred when my
iptables rules used a netmask that does not correspond to a known
subnet, namely 192.168.2.0/28 when the local network is
192.168.2.0/24. iptables was
On Wed, Feb 20, 2002 at 05:25:06AM -0800, Paul 'Baloo' Johnson wrote:
I can run and dail and otherwise use minicom as root, but if I try as a
regular user, I get
minicom: cannot open /dev/ttyS1: Permission denied
ls /dev/ttyS1 results in...
crw-r-1 root dialout4, 65 Feb
On Wed, Feb 20, 2002 at 08:45:22AM -0800, Abner Gershon wrote:
Can someone tell me search and replace commands I can
use to convert comma delimited text in form:
field 1,field 2,field 3
to text file to be used in tabular latex file of form:
field 1 field 2 field 3
Will this do ?
cat
61 matches
Mail list logo
