On 27/3/23 19:48, Richmond wrote:
So how is the preference determined? It seems to be determined by the
DNS, but why or how do I tell for example with host -v?
When you as a DNS about a hostname it can return an A record and/or an
record.
The A record is IPv4 and the record is I
On 25/3/23 08:32, Greg Wooledge wrote:
I didn't know .one was a valid TLD. It looks like .two is not, so if
someone were to assign "two.two.two.two" as the PTR value of an IP
address, that PTR would not resolve back to any IP address. (An IP
address block owner might reject such a petition.)
On 23/3/23 15:42, Nicolas George wrote:
Jeremy Ardley (12023-03-23):
On your second topic I don't usually run firewalls on my cloud severs.
But surely on a server the network configuration is static, including
the firewall rules, isn't it?
On AWS the firewall rules are set by AWS
On 23/3/23 07:33, Greg Wooledge wrote:
On Thu, Mar 23, 2023 at 07:06:55AM +0800, Jeremy Ardley wrote:
I am the guilty party who had docker. I have not raised any issue about it. The
instance is not used any more and was an experiment in running nextcloud on an
arm server
Then perhaps you
On 23/3/23 05:47, Greg Wooledge wrote:
On Wed, Mar 22, 2023 at 09:16:48PM +, Tom Furie wrote:
Or...
ip -o a | awk '{print $2, $4}'
I think they wanted to restrict it to IPv4 (inet) addresses, and omit
the netmask (/8 or whatever CIDR suffix), so:
ip -o a | awk -F '[ /]*' '$3 == "inet" {
Is there any open source AI speech synthesis package that can be run on
a Debian workstation or server?
That is a package that has a large modern set of training data and that
can be used to 'clone' a new voice from a relatively small sample.
Secondarily that it has a workable near real time t
On 22/3/23 09:12, f...@dnsbed.com wrote:
Hello,
In my shell script, how to get the localhost's IPs (eth0 and eth1)
correctly?
I know I can run 'ifconfig' and grep etc, but it's maybe not that
graceful.
On Debian the preferred command is
root@debian12:~# ip a
1: lo: mtu 65536 qdisc noqueu
On 22/3/23 06:27, Stefan Monnier wrote:
Interesting.
I can't remember ever seeing 192.168.1.1/32 used. In my my part of the
world, it's only meaningful as a degenerate form: all the syntaxes I've
seen which accept the IP/NN notation also accept just IP to mean IP/32,
so writing IP/32 is just
On 21/3/23 10:20, Jeremy Ardley wrote:
On a tangent, I've just set up a Debian 11 Linode LEMP server with 1GB
RAM and 10GB Disk.
It's not in the least troubled by the limited memory. Also there is no
swap in the default image - which seem sensible as it's on a SSD and
you d
On 21/3/23 10:02, Stefan Monnier wrote:
So, maybe there's a "good" reason why Apple still configures their
cheapest laptop with only 8GB of RAM: for "normal" work it's still
perfectly sufficient, despite all the best efforts of web site designers
out there.
[ But I would recommend against buyi
On 20/3/23 17:21, to...@tuxteam.de wrote:
I get the impression the problem is to send return traffic back out on the
interface it came in on.
If this is it, then rp_filter, as I proposed elsewhere in this
thread, seems like exactly made for this.
I'm afraid poking kernel parameters is beyond
On 20/3/23 16:39, Stanislav Vlasov wrote:
пн, 20 мар. 2023 г. в 12:33, :
I have a networking question that I can't understand for.
I have the Debian 11 host with two ethernet cards.
There is public IP and gateway for each ethernet card.
(they are public IPs from two different net address bloc
On 20/3/23 02:48, David Wright wrote:
O
Checking the RFC. To my reading the final stanza is not checked
" The is compared to the given network. If CIDR prefix length
high-order bits match, the mechanism matches."
https://datatracker.ietf.org/doc/html/rfc7208#section-5.6
So in this case
On 19/3/23 19:29, Jeremy Ardley wrote:
In this case of the /24 it gave an answer I expected. I imagine it
will take a trawl of the RFC and then of actual implementations to
find out for sure.
The best description of the AI is it is informative but not authorative.
Checking the RFC. To
On 19/3/23 19:10, to...@tuxteam.de wrote:
[...]
Yes, it is just a simulation of knowledge (it can be pretty
convincing at that,though).
In other words: if you want an answer from it, you have to
know the answer beforehand.
I have actually paid for a subscription and have used it for a month n
On 19/3/23 18:38, cor...@free.fr wrote:
So,
* 188.66.63.1/24 is a range, not a single host in SPF
* why it's not written as 188.66.63.0/24 which is more clear?
In the very specific case of an SPF there will be a rule. I assume given
the AI response that the rule is to use the net definiti
On 19/3/23 18:28, cor...@free.fr wrote:
"v=spf1 ip4:188.66.63.1/24 -all"
According to an AI version 4 that cannot be named:
This is an SPF (Sender Policy Framework) record, which is a TXT record
in a domain's DNS settings. SPF records are used to help prevent email
spoofing by specifying w
On 16/3/23 12:09, p...@ymail.ne.jp wrote:
Just for fun, I asked this question on ChatGPT, who gives the answers
as follows.
Q: Please help generate a systemd configuration for Debian linux
A: Sure, here's an example of a systemd configuration file for a
Debian Linux service:
Be very care
On 15/3/23 01:53, David Wright wrote:
I had hoped (not very hopefully) the solution wouldn't involve bashing
kernel parameters.
From previous journeys in this area systemd-networkd does a much
neater job and has huge numbers of options.
This is my worstation config
I hope it gets better :
On 14/3/23 16:21, Tim Woodall wrote:
On Tue, 14 Mar 2023, Jeremy Ardley wrote:
I conclude there is no IPv6 DHCP involved but there must be something
that listens to RA announcements and generates a MAC derived address
from that.
I still need to know how to control that as there are options
On 14/3/23 13:15, David Wright wrote:
cat /etc.network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo i
On 14/3/23 12:29, jeremy ardley wrote:
I am testing the alpha 2 release of Debian 12
(I'm quite annoyed they have done away with /var/log/syslog)
My system is "pure" debian 12 and was net installed a few minutes
before my checks. Nothing was changed from the original instal
I am testing the alpha 2 release of Debian 12
(I'm quite annoyed they have done away with /var/log/syslog)
My system is "pure" debian 12 and was net installed a few minutes before
my checks. Nothing was changed from the original install.
My problem today is identifying what bit of the system i
On 14/3/23 07:55, rhkra...@gmail.com wrote:
On Sunday, March 12, 2023 09:02:26 PM cor...@free.fr wrote:
When such a debian (the digital product) is authentic, should we say it
"real debian" or "true debian"?
I am not sure about this statement.
My guess is that Corey is a French speaker, and
On 14/3/23 07:23, Greg Wooledge wrote:
I have not to this day figured out what "vendor preset" means here.
Mine shows the same as yours -- "disabled; vendor preset: enabled".
All I care about is the part that says "disabled". That's the actual
state.
You may be happy to learn you can't ev
On 14/3/23 06:34, Greg Wooledge wrote:
On Tue, Mar 14, 2023 at 06:23:09AM +0800, Jeremy Ardley wrote:
FYI systed-resolved is the inbuilt debian caching DNS server which may be
enabled by default.
It is NOT enabled by default.
unicorn:~$ systemctl status systemd-resolved
● systemd
On 14/3/23 06:34, Greg Wooledge wrote:
On Tue, Mar 14, 2023 at 06:23:09AM +0800, Jeremy Ardley wrote:
FYI systed-resolved is the inbuilt debian caching DNS server which may be
enabled by default.
It is NOT enabled by default.
It is if you are using NetworkManager
--
Jeremy
(Lists)
On 14/3/23 06:23, Jeremy Ardley wrote:
I had a signed DNS error in a similar configuration using a bind
authoritive and caching server. It turned out it was systemd-resolved
interfering and/or replacing part of the DNS chain
FYI systed-resolved is the inbuilt debian caching DNS server
On 14/3/23 06:14, local10 wrote:
Strangely, the issue resolved itself without me having to do anything. Am really puzzled
as to what it was. Perhaps the internet provider suddenly started to block DNS queries
but then allowed them again? If so, why did dig's message say that there was
"comm
On 13/3/23 17:12, local10 wrote:
"debug 1;" doesn't seem to be a valid option, couldn't start BIND with it. Anyhow, the
following is what I get when running "dig www.yahoo.com"
Mar 13 05:03:11 tst systemd[1]: Started named.service - BIND Domain Name Server.
Mar 13 05:03:11 tst named[52836]:
On 13/3/23 16:19, local10 wrote:
Mar 13, 2023, 07:25 by jer...@ardley.org:
Try
netstat -tulpnW | grep 53
and see what's listening
Bind seems to be listening on 127.0.0.1 port 53.
I don't have netstat installed and can't easily install it as aptitude can't
resolve Debian server's name to
On 13/3/23 16:19, local10 wrote:
Bind seems to be listening on 127.0.0.1 port 53.
I don't have netstat installed and can't easily install it as aptitude can't
resolve Debian server's name to an IP, so the following is what I tried:
# telnet -4 127.0.0.1 53
Trying 127.0.0.1...
Connected to 1
On 13/3/23 14:34, local10 wrote:
Mar 13, 2023, 06:19 by jer...@ardley.org:
The contents of /etc/resolv.conf are always of interest.
There's really not much there:
# cat /etc/resolv.conf
nameserver 127.0.0.1
That and /etc/nsswitch.conf a/etc/hosts
# cat /etc/nsswitch.conf
# /etc/nssw
On 13/3/23 14:08, local10 wrote:
Hi,
I have a local caching DNS server that was working fine for a long time but
today, all of a sudden, it stopped resolving queries.
More info: https://pastebin.com/iW5YeXgS
Any ideas? Thanks
The contents of /etc/resolv.conf are always of interest.
That
On 13/3/23 06:39, Vincent Lefevre wrote:
O
Each of those options has been chosen by the mail list administrator.
As a general principal it's a good thing to know the system sending you mail
is genuine. Given the variety, there is no point in rejecting the email if
there is no certificate, bu
On 13/3/23 08:13, Brian wrote:
The processing chain in cups generated a raster bitmap image for me to
format and deliver to the printer. I didn't dig deep but I suspect the
previous stages involved postscript before raster conversion rather than
directly from a pdf stage.
Suspicions don't qu
On 13/3/23 05:52, Vincent Lefevre wrote:
Yes, but here, that's optional. So I'm wondering whether you really
miss anything. Note also that a client certificate may be sent only
if it is requested by the server, and if client certificates are
requested, then there are issues with some clients:
On 13/3/23 03:38, Stefan Monnier wrote:
Nowadays PDF is what matters: it's the standard format for driverless
printing (along with a mix of JPEG, PWG raster, or PCLm depending on
which driverless printing standard you're talking about). Admittedly,
standards like IPP Everywhere require suppor
On 12/3/23 12:50, Jeremy Ardley wrote:
Received: from edge.bronzemail.com
(2403-5800-c000-1b7-f3d4-d970-ca28-bf4f.ip6.aussiebb.net
[IPv6:2403:5800:c000:1b7:f3d4:d970:ca28:bf4f])
(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
key-exchange X25519 server-signature
On 12/3/23 12:29, Jeremy Ardley wrote:
On 12/3/23 08:48, jeremy ardley wrote:
Received: from edge.bronzemail.com
(2403-5800-c000-1b7-f3d4-d970-ca28-bf4f.ip6.aussiebb.net
[IPv6:2403:5800:c000:1b7:f3d4:d970:ca28:bf4f])
(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits
On 12/3/23 08:48, jeremy ardley wrote:
Received: from edge.bronzemail.com
(2403-5800-c000-1b7-f3d4-d970-ca28-bf4f.ip6.aussiebb.net
[IPv6:2403:5800:c000:1b7:f3d4:d970:ca28:bf4f])
(using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)
key-exchange X25519 server-signature
On 12/3/23 07:55, pe...@easthope.ca wrote:
Hi,
Appears that repro remains unavailable.
https://wiki.debian.org/FreedomBox/Manual/Repro
Also ekiga is gone.
What are the current recommendations for SIP servers?
Thx, ... P.
If all you want is SIP registration and routing
Examining incoming connections I see that google is trusted but
bendel.debian.org (this list) is not
Mar 12 08:37:39 egde postfix/25pass/smtpd[78299]: setting up TLS
connection from bendel.debian.org[82.195.75.100]
Mar 12 08:37:39 egde postfix/25pass/smtpd[78299]: Untrusted TLS
connection esta
On 11/3/23 17:56, cor...@free.fr wrote:
Now I have three debian nodes in different DCs.
Can I deploy a distributed DNS service for fault tolerance?
Assuming you don't mean a Windows DC, you can use bind (bind9) in an
architecture that has a master for a DNS zone and multiple slaves.
Change
On 11/3/23 06:09, Michel Verdier wrote:
Le 10 mars 2023 Jeremy Ardley a écrit :
smtpd_recipient_restrictions =
permit_sasl_authenticated
permit_mynetworks
reject_unauth_destination
reject_invalid_hostname
reject_non_fqdn_hostname
reject_non_fqdn_sender
On 11/3/23 05:27, Michel Verdier wrote:
Le 10 mars 2023 Jeremy Ardley a écrit :
You may run into problems if your IP address is in a range that is blacklisted
due to some addresses being used to spam. I'm not sure if IPv6 ranges have got
into that category as yet.
spamhaus has a ipv6
On 11/3/23 05:04, Jeremy Ardley wrote:
All you need to do is generate an SPF record authorising your fixed
IP(s) to send mail for your domain(s).
You don't need need to have control over the forward and reverse DNS
of the IPs, but it is pretty much required that your ISP has forward
On 10/3/23 23:52, Henning Follmann wrote:
Well "could" is the best way to describe the chances of this working.
I think the best way too find out:
Check if the ISP will allow you to set the reverse DNS record matching
your chose A record.
If they do, GREAT! If they don't, you most likely will
On 10/3/23 18:29, p...@ymail.ne.jp wrote:
Hello,
I have a home server with static IP from the ISP. The server has
debian 11 installed.
Can I setup a mail server (postfix, dovecot, dkim, rspamd etc) on this
box to receive/send email normally?
Or do you guys have this similar operation?
On 5/3/23 16:22, Ken Young wrote:
Hello,
The methods I know,
1. scp
pros: the native tool in the OS
cons: you will either input password or put key pairs into servers for
authentication.
2. rsync
pros: it can transfer data by increasement
cons: you need to setup rsyncd server and make the
I think the problem is probably unsolvable but I thought I'd ask.
I understand slapd starts as user root and reads config etc and then
changes to user openldap
This means that it could potentially read a private key owned by root
during startup?
The problem is when I try and configure priva
On 3/3/23 12:02, hlyg wrote:
at first i suspect Thunderbird(TB) try to access some sites that are
blocked in china
i disable show Start Page when it launches
i disable check email automatically for each account
but it becomes unresponsive when i File->New->Message
i really don't know cause o
On 2/3/23 05:51, Greg Wooledge wrote:
On Wed, Mar 01, 2023 at 02:43:38PM -0700, Charles Curley wrote:
On Thu, 2 Mar 2023 03:48:49 +0800
jeremy ardley wrote:
2. The known hosts file used is /etc/ssh/known_hosts rather that
~/.ssh/known_hosts - which causes a permissions error
I am not
On 2/3/23 05:52, Jeffrey Walton wrote:
On Wed, Mar 1, 2023 at 2:49 PM jeremy ardley wrote:
I may have found a bug in openssh.
[...]
I have created a ~/.ssh/config file with contents
Host jeremy_client
HostName client.example.com
User jeremy
IdentityFile ~/.ssh
I may have found a bug in openssh.
I raise it here as the ssh mailing list is actually a newsgroup that
no-one seems to use.
I can ssh jer...@client.example.com without the issue
I have created a ~/.ssh/config file with contents
Host jeremy_client
HostName client.example.com
User jer
My syslog gets a couple of dozen line like below every 10 mins or so.
Any way to stop it? Or get syslog to send it to /dev/null ?
Feb 26 06:50:22 client
org.mate.panel.applet.MateWeatherAppletFactory[3517]: Forecast for
Monday 27 February
Feb 26 06:50:22 client
org.mate.panel.applet.MateWeath
On 23/2/23 18:23, daven...@tuxfamily.org wrote:
Hello,
On 2023-02-23 02:59, cono...@panix.com wrote:
On 2/22/23, daven...@tuxfamily.org wrote:
There is an unidentified process that decides it's ok to delete and
recreate /etc/resolv.conf without asking user/admin,
The problem is, the problema
I want to compile a statically linked version of gedit using the
upstream meson based package.
I've got the sources matching my current Debian 11 system and can do a
build no problem.
What I want to do is statically link the gedit executable. I see the
non-static executable is very small and
On 16/2/23 07:45, Michael Stone wrote:
I don't personally think there's a point in partitioning any storage
device on a user system these days beyond what's required to boot. If
you want to do more, that's a personal preference. Being an SSD
doesn't really change things.
I agree with th
On 10/2/23 19:03, gene heskett wrote:
Chuckle, guilty Tomas, but NM has now been muffled and no longer yells
at you via the logs when it find's a chattr +i denying its ability to
impregnate the lassie.
I personally eradicate NM and use either systemd-networkd on debian, or
networking serv
On 10/2/23 05:32, Michel Verdier wrote:
Le 9 février 2023 gene heskett a écrit :
And where is that info published? Up till now I was not aware of an ipv6 equ
to 192.168.xx.xx addresses. That could make the cheese quite a bit less
binding. :o)>
You could find a nice list here:
https://www.ap
On 9/2/23 17:13, Anssi Saari wrote:
If forwarding is not enabled, then the LAN IPv6 hosts are just as
isolated from incoming traffic from the internet as hosts behind NAT.
If you don't have IPv6 forwarding on the router then none of your
internal hosts will be able to communicate on IPv6 beyo
On 9/2/23 06:39, gene heskett wrote:
On 2/8/23 16:29, jeremy ardley wrote:
On 9/2/23 04:54, gene heskett wrote:
My several machine home net is behind a dd-wrt install, NAT'ed so
that any machine here has access to the net via the ipv4 address my
router obtains from them. That legal
On 9/2/23 04:54, gene heskett wrote:
My several machine home net is behind a dd-wrt install, NAT'ed so that
any machine here has access to the net via the ipv4 address my router
obtains from them. That legally is a dynamic address but hasn't
changed in the decade and a half since I last sw
On 6/2/23 23:45, Roy J. Tellason, Sr. wrote:
On Sunday 05 February 2023 06:29:12 pm local10 wrote:
5 Feb 2023, 20:28 byy...@masson-informatique.fr:
Does anybody knows trusted manufacturers / brands I could find on the Internet? I am
really disappointed by this battery (brand "vhbw") partially
I'm having trouble with kdevelop (and getting zero support from the
kdevelop list)
I installed the latest Debian version using apt, but the problem is when
I go to open an existing project all project files are grayed out in the
file browser. Unable to resolve this I downloaded the latest AppI
On 25/1/23 15:44, jeremy ardley wrote:
On 25/1/23 15:33, to...@tuxteam.de wrote:
On Wed, Jan 25, 2023 at 02:51:05PM +0800, jeremy ardley wrote:
[...]
0.41
lstat("/var/www/grammartiste.com/web/vendor/autoload.php",
0x7fffdc580970) = -1 EACCES (Permission denied)
On 25/1/23 15:33, to...@tuxteam.de wrote:
On Wed, Jan 25, 2023 at 02:51:05PM +0800, jeremy ardley wrote:
[...]
0.41 lstat("/var/www/grammartiste.com/web/vendor/autoload.php",
0x7fffdc580970) = -1 EACCES (Permission denied)
0.34 lstat("/var/www/grammartiste
I am having trouble with php8.1-fpm commanded from nginx on a bullseye
system
php8.1-fpm reports access denied when opening a specific file for the
application. The file has universal rwx permissions (after attempting to
fix problem). I am not running selinux but I do see some references to
a
On 15/1/23 07:46, Gary L. Roach wrote:
The lack of information is because I never got off the ground with
this. I did finally figured out how to get ./sat to work and
completely cleaned up all of the missing pieces. But then I am a loss
of what to do next. My top Salome directory looks like
On 5/1/23 12:56, Jeffrey Walton wrote:
On Wed, Jan 4, 2023 at 11:34 PM Gareth Evans wrote:
On 3 Jan 2023, at 22:07, Tom Browder wrote:
I ... would like to access my home server from my laptop ...
On 5 Jan 2023, at 04:13, Jeffrey Walton wrote:
...
Avoiding the key exchange is a big win
s
On 25/12/22 10:14, Piperみかこ wrote:
Hello,
I have setup the following iptables on linux server,
sudo /usr/sbin/iptables -F
sudo /usr/sbin/iptables -A INPUT -s 127.0.0.1 -j ACCEPT
sudo /usr/sbin/iptables -A INPUT -s xx.xx.xx.xx -j ACCEPT # my server
public IP
sudo /usr/sbin/iptables -A INPUT
I have just converted a qnap TS-212 NAS from the vendor software to a
stock Debian 10. (Armel)
I notice immediately that the NAS never spins down its disks when idle -
as it used to with the vendor software.
The NAS is used maybe once per day to take backups via smb.
Ideally, I'd like it to
On 4/12/22 20:56, Andrew M.A. Cater wrote:
On Sun, Dec 04, 2022 at 05:29:58AM -0600, Richard Owlett wrote:
I wish to document a personal project.The desired format will resemble the
outline for term papers we wrote in school in the 50's. Except some items
may be a short paragraph or two long.
Timely video on the unix/linux startup processes applicable to versions
of Debian.
https://www.youtube.com/watch?v=Fz8Ldw-s8_Q
--
Jeremy
On 14/11/22 22:34, hw wrote:
[...]
However, systemd-networkd works as well (and better) with
an easier configuration.
Hm, then why isn't it the default, and what's network manager for?
NetworkManager seems to be a RedHat baby and has some effort put into a
GUI. systemd-networkd has not go
On 15/11/22 00:22, Curt wrote:
On 2022-11-14, jeremy ardley wrote:
Network Manager is terrible. Some of the instructions include you having
to reboot your system to make chages take.
What "instructions" would those be, and of what provenance, that require a
system reboot rat
On 14/11/22 19:14, hw wrote:
On Mon, 2022-11-14 at 07:50 +0800, jeremy ardley wrote:
I decided to use systemd-networkd service and removed most of the stuff
from /etc/network/interfaces
[...]
Thanks! I considered installing network manager, but the Debian wiki gave me
the impression that
On 14/11/2022 7:50 am, jeremy ardley wrote:
> How do I additionally assign fd53::40/16?
I faced exactly the same problem on a recent new install of Debian 11.
I decided to use systemd-networkd service and removed most of the
stuff from /etc/network/interfaces
This is my /etc/syst
On 14/11/2022 12:07 am, hw wrote:
> Hi, > > the subject says it ... I have an interface that is being
configured > with IPv4 and IPv6 addresses via dhcp. I need to assign an
> additional IPv6 address to the interface. > > > > How do I
additionally assign fd53::40/16?
I faced exactly the sam
First, Thank you Thomas for taking the effort to document this. It has
helped immensely.
I fixed one typo in your script noted below and then it all worked
flawlessly - though remarkably slow even on my PCIe NVME drive.
I also made a mistake, it was two DVDs not a CD so quite a few gigabytes.
I have a CD that was written by mondorescue and it has hundreds of files
in the form
.afio.bz2.
I can open individual files using Xarchiver and see they are
individually parts of an old system of mine.
Can someone suggest a simple command line to extract the hundreds of
files and write/merg
On 1/11/22 22:20, The Wanderer wrote:
This definitely isn't cmake. It's part of the Debian build system, and
if that depended on cmake, I'm all but absolutely certain that I'd know
it by now.
Also, this has nothing to do with the build system for the software
being packaged; it's entirely to d
On 1/11/22 22:11, jeremy ardley wrote:
Search for some CMakeFiles.txt files to check if you need to explore
cmake further.
Wrong. My typing error. Look for CMakeLists.txt files.
--
Jeremy
On 1/11/22 21:59, The Wanderer wrote:
However, in doing so I have run into a snag which I previously skipped
over and ignored: I don't actually know what the @variable@ syntax
means/does, or what parses it. It's not Makefile syntax, as far as I've
been able to determine. I haven't thus far found
I've recent had to do a fresh GUI install of Debian GNU/Linux 11
(bullseye) and I enabled Mate 1.24.1
I let the install run with the default Network Manager installation but
very rapidly ran into the usual litany of bugs in making minor tweaks to
the network (it is not a good sign if the gener
On 17/10/22 9:32 am, Stefan Monnier wrote:
pa...@quillandmouse.com [2022-10-16 14:22:16] wrote:
Pi's don't have SATA.
Depends on the flavor. Banana Pi and Orange Pi mini definitely do.
[ But not a very good one, admittedly. And their power infrastructure
tends to be overwhelmed when you c
On 4/10/22 8:52 pm, debian-u...@howorth.org.uk wrote:
To use the display without ssh root login. ssh as normal user to
host. Then
echo $DISPLAY
su -
export DISPLAY=localhost:10 (or whatever your logged in user DISPLAY
is set to)
xauth add $(xauth -f ~/.Xauthority list | tail -1)
xhost
Tha
On 4/10/22 7:39 pm, Greg Wooledge wrote:
Change the sshd_config to allow direct root logins.
Then do ssh -X r...@debian.box.
If you're the paranoid type, or if the Debian system is exposed to the
public Internet, then make sure you only permit root logins when using
pubkey authentication, not p
On 8/9/22 7:10 pm, rhkra...@gmail.com wrote:
To people who have familiarity with both postfix and exim4, is postfix
really
easier (in a variety of senses) than exim4? LIke to install, setup, and use?
I tried to set up postix back near the beginning of my Linux odyssey, maybe
sometime between
On 8/9/22 12:29 pm, to...@tuxteam.de wrote:
On Wed, Sep 07, 2022 at 10:31:37PM +0200, Sébastien Hinderer wrote:
Dear all,
(I am not subscribed to the list)
Currently I am using exim4 as mail transport agent (MTA).
I am looking for another one, because I would like to be able to
configure the
On 4/9/22 2:39 pm, Rand Pritelrohm wrote:
1. Bridge using routed subnet:
ip link add dev br0 type bridge
ip addr add 192.168.222.1/24 dev br0
ip link set dev br0 up
ip tuntap add tap0 mode tap
ip link set dev tap0 up
ip link set dev tap0 master br0
#Then I h
On 31/8/22 10:45 pm, Chuck Zmudzinski wrote:
I don't use haproxy but I see there is a package for it in the Debian
repos. I think what you are seeing should be reported as a bug in
haproxy if you are using the Debian packaged version. The haproxy
package should start haproxy at the appropriate
On 31/8/22 9:16 pm, Anssi Saari wrote:
I wonder what bugs Jeremy has found and reported against
systemd-resolved though. I remember getting a big headache trying to get
interface specific DNS configuration going only to eventually find out
it really wasn't working in the version Debian packaged
On 31/8/22 11:11 am, Greg Wooledge wrote:
apt-cache policy libdbi-perl perlapi-5.28.1
On Debian 11, libdbi-perl should depend on perlapi-5.32.0 not
perlapi-5.28.1 so I suspect you've got the wrong libdbi-perl somehow.
It would also help if you showed the full error message, instead of only
a
I am install a VM for a LEMP server using the latest ISO
debian-11.4.0-amd64-DVD-1.iso
The problem is installing mariadb (after installing nginx and php-fpm
and doing apt update and apt upgrade)
sudo apt install default-mysql-server
...
The following packages have unmet dependencies:
libdb
On 30/8/22 9:56 am, Ross Boylan wrote:
Now everything just works.
Thanks again to everyone.
There are probably some general lessons, though I'm not sure what they
are. Clearly the systemd semantics tripped me up; it's kind of an odd
beast. I understand one of its major goals was to allow st
On 31/8/22 7:36 am, Jon Leonard wrote:
On Tue, Aug 30, 2022 at 04:27:09PM -0700, L L wrote:
I'm on bullseye, and installed chromium from the bullseye repos. In
Chromium I get the message that the browser is "managed by your
organization." I didn't do any special setup for work or school. Is the
On 27/8/22 8:25 pm, to...@tuxteam.de wrote:
On Sat, Aug 27, 2022 at 11:55:44AM -, Curt wrote:
On 2022-08-27, Jeremy Ardley wrote:
I'd appreciate any suggestions about how to diagnose or cure the
problem. I have set VERBOSE=yes in /etc/default/networking
First of all e
On 27/8/22 7:55 pm, Curt wrote:
On 2022-08-27, Jeremy Ardley wrote:
I'd appreciate any suggestions about how to diagnose or cure the
problem. I have set VERBOSE=yes in /etc/default/networking
First of all ensure NetworkManager is really dead.
Your advice and the advice of Andre
201 - 300 of 436 matches
Mail list logo
