Glen-
You have to boot the 2.4 kernel on the installer. It has drivers for
the Dell PERC RAID controllers.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Yu,Glen [Ontario] wrote:
Hi everyone,
I'm trying to install Debian 3.1 (2.6.x kernel) onto a Dell PowerEdge 2800
server (yes, I know they support only Windoze RH) and it gave an error
during the detecting hard drives/partition part of the install process. It
said that no partitions
Yu,Glen [Ontario] wrote:
Does anybody know why this is happening and (more importantly) how to fix
this issue?
It's most likely unsupported hardware by the kernel you're using to
install. Check the links I provided on the other.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
Woody entirely, then
upgrade to Sarge while preserving the kernel? Or is there an even better way
than that?
Thanks
Glen
-Original Message-
From: jlmb [mailto:[EMAIL PROTECTED]
Sent: Friday, March 03, 2006 2:06 PM
To: debian-user@lists.debian.org
Subject: Re: Debian 3.1 installation
Yu,Glen [Ontario] wrote:
Hi,
Thanks for your reply Jorge, but I've already tried that ISO before and it's
for the 3.0 Woody version of Debian. However, I'm looking to install Sarge.
However, it did say on the site that it would work for Sarge as well, but I
don't see how that would work.
Message-
From: Joris Huizer [mailto:[EMAIL PROTECTED]
Sent: Friday, March 03, 2006 2:56 PM
To: debian-user@lists.debian.org
Subject: Re: Debian 3.1 installation not detecting my hard drives =(
Yu,Glen [Ontario] wrote:
Hi,
Thanks for your reply Jorge, but I've already tried that ISO before
Yu,Glen [Ontario] wrote:
Hmm...I think there's some confusion here, so allow me to clear things up a
little.
1) I am trying to install Debian 3.1 Sarge (at the moment I don't care which
kernel) on a Dell PowerEdge 2800 Server
2) When I try to do (1), at the Partition Hard Disk section of the
-user@lists.debian.org
Subject: Re: Debian 3.1 installation not detecting my hard drives =(
Yu,Glen [Ontario] wrote:
Hmm...I think there's some confusion here, so allow me to clear things up a
little.
1) I am trying to install Debian 3.1 Sarge (at the moment I don't care which
kernel
Yu,Glen [Ontario] wrote:
[PARTIALLY SOLVED!!]
Ok...this is going to sound a little stupid, but if I installed Sarge
normally with the 2.4.27 kernel, everything works properly.
This baffles me even more because I don't really see why a 2.4 kernel would
recognize the hardware, but not the
Yu,Glen [Ontario] wrote:
[PARTIALLY SOLVED!!]
Ok...this is going to sound a little stupid, but if I installed Sarge
normally with the 2.4.27 kernel, everything works properly.
This baffles me even more because I don't really see why a 2.4 kernel would
recognize the hardware, but not the
Colin wrote:
Yu,Glen [Ontario] wrote:
[PARTIALLY SOLVED!!]
Ok...this is going to sound a little stupid, but if I installed Sarge
normally with the 2.4.27 kernel, everything works properly.
This baffles me even more because I don't really see why a 2.4 kernel would
recognize the hardware,
11 matches
Mail list logo
