On Sun, 24 Dec 2017, Georgi Naplatanov wrote:
if you are using PulseAudio just remove any exiting content of
~/.asoundrc and put this:
hi Georgi,
thank you for your suggestion, but I can't launch pulseaudio:
Failed to load module "module-alsa-sink"
and as I have a working config
On 12/21/2017 09:04 PM, Pierre Frenkiel wrote:
> hi,
> the sound works perfectly with vlc or audacity, but I can't make aplay
> to work.
> the "aplay -l" output is:
> List of PLAYBACK Hardware Devices
> card 0: HDMI [HDA ATI HDMI], device 3: Generic Digital [Generic Digital]
>
On Sat, 23 Dec 2017, deloptes wrote:
but I told you also about plughw - no?
yes, but I told you before that I found it myself by accident, when
trying on an other wav file.
no idea why you are so resistant to getting the knowledge yourself - the man
page is even not that long and you
Pierre Frenkiel wrote:
> do you think that "find yourself" matches this definition?
It might surprise you but yes :)
If you have read man aplay to the end you would have found following
aplay -c 1 -t raw -r 22050 -f mu_law foobar
will play the raw file "foobar" as a 22050-Hz,
On Sat, 23 Dec 2017, deloptes wrote:
you know there are two types of help: feed the hungry or teach them make
food themselves - I prefer the 2nd one - you the 1st one - no reason to get
personal
from wikipedia:
A teacher is a person who helps others to acquire knowledge, competences
Pierre Frenkiel wrote:
> It's a strange way to help people to say them "find yourself"
> Generally, when people ask for help, it's that there are, like me,
> too stupid to find themselves.
> I suggest to avoid useless posts
but I told you also about plughw - no?
a brief look into man aplay
On Sat, 23 Dec 2017, deloptes wrote:
Pierre Frenkiel wrote:
aplay -D hw:1,0
this also gives
aplay: set_params:1299: Sample format non available
you could also set the sample format ;-) - I was hoping you try to find out
the way yourself.
1/ I don't see why I should loose time with
Pierre Frenkiel wrote:
>> aplay -D hw:1,0
> this also gives
> aplay: set_params:1299: Sample format non available
you could also set the sample format ;-) - I was hoping you try to find out
the way yourself.
regards
On Sat, 23 Dec 2017, deloptes wrote:
man aplay
the useful information is given by "aplay -L", which lists
19 devices, among which 2 are working:
sysdefault:CARD=Generic
plughw:CARD=Generic,DEV=0
aplay -D hw:1,0
this also gives
aplay: set_params:1299: Sample format non
Pierre Frenkiel wrote:
> On Fri, 22 Dec 2017, Tom Furie wrote:
>
>> Are the 1:0 and 1,0 above typos in the mail? If not, they should be 1.0.
>
>no: look at : http://www.alsa-project.org/main/index.php/Asoundrc
>I checked with aplay -D hw:1.0 brahms.wav.
>this gives :
> Invalid
Pierre Frenkiel wrote:
> thank you for your reply, but can you be a little more specific:
> what do you mean exactly by "use hw:1.0" ?
> where? in a config file, in the aplay command line ...?
man aplay
aplay -D hw:1,0
or -Dplughw:1,0
look also at alsa docs to understand how sound system in
On Fri, 22 Dec 2017, Tom Furie wrote:
Are the 1:0 and 1,0 above typos in the mail? If not, they should be 1.0.
no: look at : http://www.alsa-project.org/main/index.php/Asoundrc
I checked with aplay -D hw:1.0 brahms.wav.
this gives :
Invalid value for card
best regards,
--
Pierre
On Fri, Dec 22, 2017 at 06:03:22PM +0100, Pierre Frenkiel wrote:
> with hw:1:0, same result
> ->aplay -D hw:1,0 file.wav
>Playing WAVE 'file.wav' : Unsigned 8 bit, Rate 11025 Hz, Stereo
>aplay: set_params:1299: Sample format non available
>Available formats:
>- S16_LE
>-
On Fri, 22 Dec 2017, to...@tuxteam.de wrote:
Either in the command line (option -D, i.e. "device", cf aplay man
page) or in the config file (possibly ~/.asoundrc, don't know off
the top of my head how you specify that there, but try
http://www.alsa-project.org/main/index.php/Asoundrc)
I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, Dec 22, 2017 at 02:21:42PM +0100, Pierre Frenkiel wrote:
> On Thu, 21 Dec 2017, deloptes wrote:
>
> >you need to use hw:1.0
> >as you target your second card, or configure snd module to initialize the
> >analog as first card
>
> thank you
On Thu, 21 Dec 2017, deloptes wrote:
you need to use hw:1.0
as you target your second card, or configure snd module to initialize the
analog as first card
thank you for your reply, but can you be a little more specific:
what do you mean exactly by "use hw:1.0" ?
where? in a config file,
Pierre Frenkiel wrote:
> card 1: Generic [HD-Audio Generic], device 0: ALC233 Analog [ALC233
> Analog] Subdevices: 1/1
> Subdevice #0: subdevice #0
you need to use hw:1.0
as you target your second card, or configure snd module to initialize the
analog as first card
regards
17 matches
Mail list logo
