I have run the 3509b successfully with both Debian and W95.
I configured the card out of PnP mode and specified the port
(i.e. coax or 10base-T). When
configured this way, Linux sees my card without trouble, and
I just had to delete and install the card's driver in W95 to get
it to work there.
I had trouble setting up an EtherlinkII 3com 3509b card with 2.0.32 and
2.0.33 kernel. I configured pnp, compiled the right driver as module, but
the module gives me either initialization failed or symbol not found when
specifying io=0x210 irq=3...
Is it the ISA one (I think there is a PCI
: Graham Lillico +44 1785 248131 [EMAIL PROTECTED]
To: Marcus Brinkmann (Reply requested) [EMAIL PROTECTED]
Cc: Debain User Mailing List (Reply requested)
debian-user@lists.debian.org
Date: Wednesday, April 29, 1998 2:58 AM
Subject: Re: setting up ethernet 3com 3509b card
I had trouble setting up
On Tue, 28 Apr 1998, Marcus Brinkmann wrote:
I had trouble setting up an EtherlinkII 3com 3509b card with 2.0.32 and
2.0.33 kernel. I configured pnp, compiled the right driver as module, but
the module gives me either initialization failed or symbol not found when
specifying io=0x210 irq=3...
Hi,
A collegue of mine had the same problem. The solution that worked (at
least for him :-) was to dipswitch the card to non-PnP and voila! it
worked. Only Win95 did not accept the card anymore (even not manual
configuration!), but that was not important. Hope this helps!
Thanks,
Ardo
5 matches
Mail list logo