I installed newest version of gimp in hamm, but it
can neither view .gif file nor save in this format.
Is there something wrong in my configuration?
-cheng
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Okay i installed debian linux 1.3 yesterday on my computer, but i don't
have a clue what I'm supposed to do once it boots and it goes to the
prompt ($). I would like to install xwindows (or another good program)
and bitchx. Could someone please tell me how i would go about doing
this?
--
TO
I installed newest version of gimp in hamm, but it
can neither view .gif file nor save in this format.
Is there something wrong in my configuration?
.gif is a patented format--you can't legally use it without paying
royalties to Unisys. That said, there is support for it in the
On Thu, Feb 05, 1998 at 05:33:06PM -0500, John Kloss wrote:
... and I can say this about /dev/cua*
It is NOT obsolete.
Believe me, they are obsolete, and aren't any more installed.
The only way that I can connect to my modem (which is
a pcmcia card) is through /dev/cua1. I tried many
Okay i installed debian linux 1.3 yesterday on my computer, but i don't
have a clue what I'm supposed to do once it boots and it goes to the
prompt ($). I would like to install xwindows (or another good program)
and bitchx. Could someone please tell me how i would go about doing
On Thu, 5 Feb 1998, John Kloss wrote:
Okay, I'm pretty new to linux but I have my version up and running on my
laptop just fine and I can say this about /dev/cua*
It is NOT obsolete. The only way that I can connect to my modem (which is
a pcmcia card) is through /dev/cua1. I tried many times
I've searched through the FetchMail docs and I've only come up more unsure
and, possibly, confused than I was before. I'm hoping you can help.
I have a multi-drop mailbox at my ISP that I pull mail from. We have about
30 users on this end that mail from this box gets distrubuted to.
Right now,
On Thu, 5 Feb 1998, Johann Spies wrote:
It was with interest that I read Richard E. Hawkins Esq.'s comments about
Lynx and StarOffice.
.. cut ..
I was wandering whether anyone could use Lyx for anything serious. Are
there proper documentation somewhere?
Johann.
Yes, I
Hello all:
Can anyone point me in a good direction to learn how to set up RAID5 ?
I am wanting to add three SCSI drives to my 1 EIDE Drive system. I am
thinking
that I could add another EIDE drive as a mirror to the boot
device/operating system, and
RAID5 the 3 SCSI devices for mass storage and
As I recall I tried using ttyS0 (I want to use ttyS0 not ttys0 right? I
think the other one is a terminal port). At any rate, things never worked
out for that one. Believe me, that was the first one that I tried, since
that was what the PCMCIA-HOWTO recommended. As an aside, I don't nor have
I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I recently purchased spellcaster isdn cards, and it seems that
Babylon(their isdn4linux, sorta) does not want to run on smp kernels.
Does anyone know if isdn4linux runs/works with smp kernels?
Thanks,
- --
Walter L. Preuninger II
Hi!
I would like to add the question. (Sorry !)
Debian supports the HA(High Avaliablility) or PDB(Parallel Data Base) ?
Thanks for any related response
whkye
Greg Green wrote:
Hello all:
Can anyone point me in a good direction to learn how to set up RAID5 ?
I am wanting to add three SCSI
I'm planning to build a new box in the next month or two. It'll sit
between my 10Mbit ethernet line and my current machine. I need to use
this (old) one to dual-boot to Win95 sometimes, but I've become dependent
on linux to do email/web/etc., so I'll masquerade the Win95 machine
through the
Will Lowe wrote:
I'm using the tetex distribution in hamm. I need to set my margins to
normal US default ones; I used to do this with regmar.sty in
previous/other versions of latex. How do I do this in tetex -- I can't
find regmar.sty anywhere ...
Use `fullpage.sty', eg,
On Fri, Feb 06, 1998 at 11:24:12AM +1300, Michael Beattie wrote:
Where is the setting which inhibits the addition of the equivalent of
'uname -a' at the start of /etc/motd ?? I have found it before... now I
cant.
If you're using hamm, edit /etc/default/rcS and set EDITMOTD=no.
HTH,
Adam Klein
On Thu, Feb 05, 1998 at 09:16:24AM -0600, Charles Read wrote:
I cannot find a sendmail-HOWTO on the web?
What's the next best resource for sendmail?
www.sendmail.org
Scott
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL
On Fri, Feb 06, 1998 at 12:24:16AM +0200, impale wrote:
What is the difference between /dev/cua? and /dev/ttyS? ?
I believe the former is for callout only which the latter is for
callin/callout. Whether this refers to traffic or connection I don't
know, just remember gleaning this from making
Thanks for the help. :)
Will
--
| [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] |
| http://www.cis.udel.edu/~lowe/
Hi,
Charles == Charles Read [EMAIL PROTECTED] writes:
Charles I cannot find a sendmail-HOWTO on the web? What's the next
Charles best resource for sendmail?
I assume that your problm can't be solved by a simple
invocation of /usr/sbin/sendmailconfig. There is the best sendmail
I am trying to set up a printer accounting system on our network. Is
there a package available that can do this???
Basically I have a debian linux server, and a HP laserjet 5M (postscript)
which is running at the moment as a remote printer (via a jetdirect print
server build into the printer).
Mark Goble wrote:
(snip)
A couple of suggestions from someone _still_ in the newbie stage:
Get ahold of the Debian installation instructions and read up on using
deselect to install XFree86. Another good set of Debian specific
instructions is the "Debian User's Guide" by Dale Scheetz
Like a dummy, I bought a UPS without bothering to check if genpowerd
supports it (I don't think it does). But before taking it back (I
believe I have a week to do so and it's real stormy now, so I'm glad
to have it anyway), I wanted to ask if anyone knew if I could do
anything with it.
I bought
Hello all...
Is there any way in Debian I can break files down to floppy size for
archive purposes? Say I want to backup netscape so I don't have to go
back and download it again if I do a complete re-install...
How do I accomplish this? and how do I re-assemble the pieces to install
the program?
Hi everybody,
I'm trying to use one of HP 100 VG card : J2585B and my debian couldn't
recognize thi card absolutelly.
Does anybody know how to use this card in Linux ?
Thanx Marty
+---+
| Martin Madlik
On Fri, 6 Feb 1998, John Spence wrote:
One interesting point: I've noticed that it is very common for people to
move to Debian after using other distributions. I would make a guess and
claim that there aren't too many people who migrate from Debian to another
dist after using Debian for at
[Please make sure your mail gets properly configured too - your address is
wrong.]
On Thu, Feb 05, 1998 at 04:04:26PM +0100, Thomas Winterstetter wrote:
i am in desperate search of a QUALIFIED individual to build and configure
a DEBIAN-based single work-station. i'm in frankfurt, germany and
Hello,
I am installing GhostScript (gs_3.33_6.deb) on my libc6 system. I do
not X windows but svgalibg1_1.2.13-1.deb
The gs package *requires* xlib6g library but when trying to install
that I get the following 3 errors:
ldconfig: warning: can't open /lib/libc5-compat/usr/X11R6/lib (No such
[ about a C++ profiler ]
is there such a thing in Debian (Linux awaiting packaging)?
I believe gprof does work with C++ programs. You need to compile and
link with the -pg option, then run the program, and then run pgrof with
the program name as argument. gprof is in the binutils package (at
Hello all...
Is there any way in Debian I can break files down to floppy size for
archive purposes? Say I want to backup netscape so I don't have to go
back and download it again if I do a complete re-install...
How do I accomplish this? and how do I re-assemble the pieces to install
the
Adam Klein [EMAIL PROTECTED] writes:
On Fri, Feb 06, 1998 at 11:24:12AM +1300, Michael Beattie wrote:
Where is the setting which inhibits the addition of the equivalent of
'uname -a' at the start of /etc/motd ?? I have found it before... now I
cant.
If you're using hamm, edit
Walter L. Preuninger II [EMAIL PROTECTED] writes:
I recently purchased spellcaster isdn cards, and it seems that
Babylon(their isdn4linux, sorta) does not want to run on smp kernels.
Does anyone know if isdn4linux runs/works with smp kernels?
Don't know, but check out de.alt.comm.isdn4linux
Hello,
I'm curious as to people's opinions on the license for the JPython
package. It's a Python-Java bytecode compiler; the full text of
the license is available at:
http://www.python.org/jpython/license.html
Does this qualify as free software (under the terms of the Debian
Social
Joergen Haegg [EMAIL PROTECTED] writes:
Would perl 5.004_04 break debian 1.3.1?
You mean the package found in bo-unstable? No, don't think so.
Ciao,
Martin
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL
PLEASE REMOVE THE ADDRESSES [EMAIL PROTECTED] [EMAIL PROTECTED] or any
freetech-mall.com address !!
DO IT NOW I DONT WANT TO READ THIS AND I NEVER wanted !
STefan GAertner
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL
PLEASE REMOVE THE ADDRESSES [EMAIL PROTECTED] [EMAIL PROTECTED] or any
freetech-mall.com address !!
DO IT NOW I DONT WANT TO READ THIS AND I NEVER wanted !
STefan GAertner
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL
PLEASE REMOVE THE ADDRESSES [EMAIL PROTECTED] [EMAIL PROTECTED] or any
freetech-mall.com address !!
DO IT NOW I DONT WANT TO READ THIS AND I NEVER wanted !
STefan GAertner
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL
What package is the Millenium II support under? SVGA?
Paul
Yes. The hamm (unstable) distribution of xbase+xserver-vga (Debian)
has already the Millenium II option.
At\'e breve
===
Pedro Quaresma de Almeida
Departamento de Matem\'atica
Faculdade de Ci\^encias e
PLEASE REMOVE THE ADDRESSES [EMAIL PROTECTED] [EMAIL PROTECTED] or any
freetech-mall.com address !!
DO IT NOW I DONT WANT TO READ THIS AND I NEVER wanted !
STefan GAertner
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL
PLEASE REMOVE THE ADDRESSES [EMAIL PROTECTED] [EMAIL PROTECTED] or any
freetech-mall.com address !!
DO IT NOW I DONT WANT TO READ THIS AND I NEVER wanted !
STefan GAertner
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL
PLEASE REMOVE THE ADDRESSES [EMAIL PROTECTED] [EMAIL PROTECTED] or any
freetech-mall.com address !!
DO IT NOW I DONT WANT TO READ THIS AND I NEVER wanted !
STefan GAertner
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL
PLEASE REMOVE THE ADDRESSES [EMAIL PROTECTED] [EMAIL PROTECTED] or any
freetech-mall.com address !!
DO IT NOW I DONT WANT TO READ THIS AND I NEVER wanted !
STefan GAertner
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL
PLEASE REMOVE THE ADDRESSES [EMAIL PROTECTED] [EMAIL PROTECTED] or any
freetech-mall.com address !!
DO IT NOW I DONT WANT TO READ THIS AND I NEVER wanted !
STefan GAertner
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL
I'm trying to setup a email server on linux box which
has sendmail ver 8.6.12.
I've a subdomain of my own.
What is the simplest way of doing this?
The email will be stored on the linux server
which will also be a name server and provide other
services.
Much Obliged.
Best Regards,
Eugene
I tried to downloed some files with wget ftp. wget is always responsing
No route to host. I'm stuck behind a firewall of my provider. http
download works fine, and ftp proxy vars are set like the http proxy
vars. Any Idea?
btw. is their a ftp-client package with proxy support? Is it possible to
Sen Nagata wrote:
i no longer have this problem. a kind soul on #debian helped diagnose
the problem.
in my case, xemacs was trying to use libc5 libraries --
the fix was to change the order of directories in /etc/ld.so.conf --
/usr/X11R6/lib came after two libc5-compat directories, so i
Sorry for my last xemacs20 mail. It was my mistake.
jenne
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Hi -
I am experimenting with xemacs 20.3 on debian linux 2.0.29 machine
w/ AMD K6 200MHz / 32M RAM. It takes xemacs about a full minute
to load in xwindows. Anyone else experience such a prolonged load
wait, or is it just me ( 20.3 ;-)?
Thanks
Jerry
--
TO UNSUBSCRIBE FROM THIS MAILING LIST:
Hi,
I would like to confirm prior to send a bugif the following /etc/porttime
should work (logoutd is always running)
users can sometimes log at after 24:00 wich is not the
spected behaviour...
thanks in advance,
Ulisses
--- begin
# /etc/porttime
When I upgraded the majordomo package to the current release, it broke the
existing majordomo setup. I've straightened it out, but what a hassle!
--
-= Sent by Debian 1.3 Linux =-
Thomas Kocourek KD4CIK
@[EMAIL PROTECTED]@westgac3.dragon.com Remove @_@ for correct Email address
--... ...-- ...
I 'd like to know if anyone else has encountered this problem
and has found a work around. If I run gdb and mess aroundin the
help menu long enough the x-server locks up in such a manner that you can't
cntrl-alt-BS out, change consoles or anything nd your onlu
option is to turn the computer on
I successfully upgraded to libc6 after a few hours of frustration :)
Although I was able to get around this on my own quite easily, I thought
it may be a concern for users with less experience:
[EMAIL PROTECTED]:~] dpkg -s libpam0g
Package: libpam0g
[snip]
Depends: libc6, libpam0g-util (=
I have a U.S. Robotics 33.6 Voice Video Faxmodem and when I went to go to add new hardware it gave me a choice to add it and to pick from the list but mine wasn't listed, I had to pick one close to it which was sportster 28800. How can I get mine to show up? Can you help? Do I need the drivers
I've been eyeing some multi-processor motherboards. After checking several web
sites, I've come across a factiod that only Intel supports dual mode. So,
what is dual mode? And does one need dual mode to run Debian under SMP
kernel option? Or can one use non-Intel processors?
--
-= Sent by Debian
eugene mendoza writes:
I'm trying to setup a email server on linux box which
has sendmail ver 8.6.12.
I've a subdomain of my own.
What is the simplest way of doing this?
The email will be stored on the linux server
which will also be a name server and provide other
services.
Much
dpk [EMAIL PROTECTED] writes:
[EMAIL PROTECTED]:~] dpkg -s libpam0g
Package: libpam0g
[snip]
Depends: libc6, libpam0g-util (= 0.57b-0)
[EMAIL PROTECTED]:~] dpkg -s libpam0g-util
[snip]
Depends: libpam0g (= 0.57b-0), libc6, libpwdb0g
Is there a reason why these two packages would
Is there any way in Debian I can break files down to floppy size for
archive purposes? Say I want to backup netscape so I don't have to go
back and download it again if I do a complete re-install...
How do I accomplish this? and how do I re-assemble the pieces to install
the program?
I
#1
OK, I got my /etc/fstab file here (mostly):
#file systemmount pointtypeoptions dump pass
/dev/hda2/ ext2 defaults0 1
/dev/hda3none swap sw 0 0
/dev/hda4/usr ext2 defaults
On 6 Feb 1998, James Troup wrote:
You don't need to use --force-depends.
15:09:[EMAIL PROTECTED]| ~/temp $sudo dpkg -iEG libpam0g_0.57b-0.deb
libpam0g-util_0.57b-0.deb
Selecting previously deselected package libpam0g.
(Reading database ... 30225 files and directories currently installed.)
Hello,
as a linux newbie I don't know how to fix a problem I have using LOCATE.
It worked allright, when I installed it, but after a while UPDATEDB and
LOCATE didn't seem to do anything, when I invoked them (except giving back
the prompt without any message). Manpage or reinstalling locate
I have just installed Debian 1.3 with the default
packages. Everything seems to be OK.
Now, I want to install X Windows.
When using Dselect, I can't seem to find the XFREE86 package.
I have noticed that there are several different front-ends to
the X GUI available in the distribution but I
When using Dselect, I can't seem to find the XFREE86 package.
You need xbase, xserver-(insert-card-type-here), xfntbase, and xfnt75.
Xbase should depend on all the others, so dselect can probably help you
out if you just select xbase for install.
Robert Ayotte [EMAIL PROTECTED] writes:
RA Now, I want to install X Windows.
RA
RA When using Dselect, I can't seem to find the XFREE86 package.
xf86 is huge enough that Debian has broken it up into several
packages. Most of these live in the x11 section. You at least need
the xbase and
When using Dselect, I can't seem to find the XFREE86 package.
I have noticed that there are several different front-ends to
the X GUI available in the distribution but I can't find
XFREE86.
I looked at your FTP site and found out that Debian 1.3.1
included XFREE86 but what is the name of
I'm pretty sure it's GPL'd. Thanks a lot. maybe you could package it and
put it in the contrib or whatever.
If it's GPL'd, it can go in main. Not sure what it'll take to get it
working under Debian, though.
I'm assuming your a Debian Developer?
Yep. [EMAIL PROTECTED]
Like a dummy, I bought a UPS without bothering to check if genpowerd
supports it (I don't think it does). But before taking it back (I
believe I have a week to do so and it's real stormy now, so I'm glad
to have it anyway), I wanted to ask if anyone knew if I could do
anything with it.
I
Kevin Traas wrote:
1. Can I have FetchMail look at To: to determine recipients rather than
X-Envelope-To? (i.e. using envelope keyword) My reason for this
question is that the To header may/will have addresses that are not local
to my domain. Will FetchMail try to redirect mail to these
Hi, I'm trying to register my monolith domain from within my ip-up
script using mlddc.
I have the line (mlddc mymldata 21) /var/log/mlddc as specified
in the readme file in ip-up.
However, when I login as usual with pppd, it doesn't register and the
/var/log/mlddc file is empty.
When I type that
Is there any way in Debian I can break files down to floppy size for
archive purposes? Say I want to backup netscape so I don't have to go
back and download it again if I do a complete re-install...
How do I accomplish this? and how do I re-assemble the pieces to install
the program?
Kevin Traas wrote:
I've searched through the FetchMail docs and I've only come up more unsure
and, possibly, confused than I was before. I'm hoping you can help.
I have a multi-drop mailbox at my ISP that I pull mail from. We have about
30 users on this end that mail from this box gets
Dunno - like I said, I skipped installing LILO completely (because it
said the 1024-cyl limit in the docs). Loadlin worked fine for running
things... Now if I can find the odd problem with my domainname not
talking to dselect I can call it working! :-)
--
From: David E.
I have found it difficult to get dselect to work correctly
with the non-US site(s). I usually just ftp ssh*.deb
from the correct directory and install it with dpki -i ssh*.deb
There may be a better way (but I don't know about it).
Paul
On 05-Feb-98 Dave Mallery wrote:
thanks much... the
Hello, i'm Lily(nickname) !!!
my problem is that i want to have internet under Linux but i don't have
'/dev/cua?' .
How can i do to have these ( i have already try with MAKEDEV but
nothing) ??
thanks for all...
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL
I have a chatscript to do callback, which looks like this.
ABORTBUSY
ABORTNO CARRIER -
ABORTVOICE
ABORTNO DIALTONE
ATZ
OK ATL1
OK ATDT5551212
ogin:\qmagic-login-id\q
RING ata
ogin:
The
On Fri, 6 Feb 1998, Lily wrote:
Hello, i'm Lily(nickname) !!!
my problem is that i want to have internet under Linux but i don't have
'/dev/cua?' .
How can i do to have these ( i have already try with MAKEDEV but
nothing) ??
thanks for all...
/dev/cua? are obsolete and depriciated. You
David Wright wrote:
I have a chatscript to do callback, which looks like this.
ABORTBUSY
ABORTNO CARRIER -
ABORTVOICE
ABORTNO DIALTONE
ATZ
OK ATL1
OK ATDT5551212
ogin:\qmagic-login-id\q
RING
On Mon, 2 Feb 1998, Anthony Towns wrote:
Are there any packages/programs/whatever that provide nice, readable
summaries for the various logs in /var/log? Things along the lines of
the daily Usenet summaries that inn produces, but for things
such as apache, inetd, mail, the ip paranoia
On Fri, 6 Feb 1998, Tim Sailer wrote:
David Wright wrote:
OK ATDT5551212
ogin:\qmagic-login-id\q
RING ata
ogin:
I thought the \q codes would prevent the secret callback username from
appearing in syslog, but it looks like this. Why?
Take
Ok !!! but i've tried with it... all i know is that my modem is on com 4
under windows
what would it be under Linux...
and when i do `dmesg | grep PPP` there is nothing although i have
installed ppp and recompiled the kernel of Linux, make the modules and
install it...
So, what can i do more
Hello,
I have installed Debian 1.3.1, but find myself without /dev/cdrom as a block
device (at the driver selection stage, nothing fitted my Mitsumi 12x, which I
ad run under an iso9660 on my previous slakware distribution).
What is a block device, and how to get the cd recognised?
Also - I
I have installed Debian 1.3.1, but find myself without /dev/cdrom as a block
device (at the driver selection stage, nothing fitted my Mitsumi 12x, which I
ad run under an iso9660 on my previous slakware distribution).
Have you looked at dmesg? Does it show the CD as being detected? Have
[EMAIL PROTECTED] (Tim Thomson) writes:
Hi,
I want to set my hardware clock to GMT. I answered no in the
question when setting up my system, so my HW clock would be local
time. I now want to set it to GMT so I don't have to change it when
daylight savings kicks in.
On my system I had to
[EMAIL PROTECTED] (John Spence) writes:
One interesting point: I've noticed that it is very common for
people to move to Debian after using other distributions. I would
make a guess and claim that there aren't too many people who migrate
from Debian to another dist after using Debian for at
I asked a question recently about the differences in .config and thought
that the difference related to kernel versions. But i've just had a look
at another dists' /usr/src/linux/.config file which uses the same kernel
version as me and it is different.
The differences relate to the details of
well, i'm back again !!!
I have reinstalled PPP and now when i make : `dmesg | grep PPP`, i've
got a message which indicates me that i have ppp.
i've tried to connect with /dev/ttyS3 but it doesn't work...
can you tell me what is the command line to get to connect ?
the one i use is :
pppd
[GUI admin stuff snipped]
Webmin and Linuxconf has the same idea. Maybe we could tinker with it and
start from there.
I'd like to see more scripts like my Debian sendmailconfig script. Not
only does it ask you the correct questions but it is a great source of
information for understanding
On Fri, Feb 06, 1998 at 09:19:32PM +0100, Lily wrote:
[snip]
one thing, i've got a USR Sportster Winmodem 33.6 PC, does is work under
Linux ?
No Winmodems won't work.
Adam Klein
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
Has anyone noticed that the debian web site has changed into a berlin
site? This should probably be fixed soon. :)
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
yes i'm sure it's a winmodem
Jens B. Jorgensen wrote:
Well, now I know what the problem is. Linux does not support the
Winmodem
because it doesn't work like most modems, but has a proprietary
interface.
Are you sure it's a winmodem?
Lily wrote:
well, i'm back again !!!
I have
Somehow, the the Debian web site has been pointed at the
Berlin Project's web site, and theirs ahs been pointed
at www.us.debian.org. Has anyone else noticed this, and is
anything being done about it?
Adam Klein
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL
I'm having a little trouble with configuring my card. I have the 250MHz
type with 8 megs of ram.. anyhow, when I switch to another console and
return, the screen is shifted about 5 and wrapped around the other side..
Also, the X doesn't fill the screen correctly -- squished vertically and
too
On Fri, Feb 06, 1998 at 12:45:47PM -0800, Adam Klein wrote:
Somehow, the the Debian web site has been pointed at the
Berlin Project's web site, and theirs ahs been pointed
at www.us.debian.org. Has anyone else noticed this, and is
anything being done about it?
www.debian.org is restored.
Adam Klein wrote:
Somehow, the the Debian web site has been pointed at the
Berlin Project's web site, and theirs ahs been pointed
at www.us.debian.org. Has anyone else noticed this, and is
anything being done about it?
The admins are working on this as we speak.
--
see shy jo
--
TO
On Fri, Feb 06, 1998 at 01:22:49PM -0700, ninjaz wrote:
Has anyone noticed that the debian web site has changed into a berlin
site? This should probably be fixed soon. :)
This was a mistake, we're working on it.
Regards,
Joey
--
/ Martin Schulze * [EMAIL PROTECTED] *
I'm having a little trouble with configuring my card. I have the 250MHz
type with 8 megs of ram.. anyhow, when I switch to another console and
return, the screen is shifted about 5 and wrapped around the other side..
Also, the X doesn't fill the screen correctly -- squished vertically and
The KDE project is starting to make some configuration programs.. I
haven't used all of these programs, but the ones I've used are really
good.
sysv init editor
user editor (w/ quota options)
kdm configuration
filesystem analyser + mount/unmount (intergraded with desktop)
ppp (never used it, but
I'm having a little trouble with configuring my card. I have the 250MHz
type with 8 megs of ram.. anyhow, when I switch to another console and
return, the screen is shifted about 5 and wrapped around the other side..
Also, the X doesn't fill the screen correctly -- squished
-Original Message-
From: Fulgham, Brent/SCO
Sent: Friday, February 06, 1998 9:38 AM
To: '[EMAIL PROTECTED]'
Subject: ppp troubles
Is there anything unusual about using ppp-2.3.2 under hamm? I had a
working ppp system under Red Hat 4.1. I had to remove that partition
Jens Christian Lisner [EMAIL PROTECTED] writes:
And why does netscape-3.01 gunzip all .gz and .tgz files???
(Not fair if you download a orig.tar.gz file!)
You download the tar.gz and netscape does a gunzip on the fly, so the file
is transfered gziped but it will save it gunzipped. No Problem.
Tony [EMAIL PROTECTED] writes:
I have installed Debian 1.3.1, but find myself without /dev/cdrom as a block
device (at the driver selection stage, nothing fitted my Mitsumi 12x,
which I
ad run under an iso9660 on my previous slakware distribution).
What is a block device, and how to get
T-SNAKE [EMAIL PROTECTED] writes:
#1
OK, I got my /etc/fstab file here (mostly):
#file systemmount pointtypeoptions dump pass
/dev/hda2/ ext2 defaults0 1
/dev/hda3none swap sw 0 0
/dev/hda4
1 - 100 of 106 matches
Mail list logo