Hi,
Sometimes I see a program (I think) but I can't run it, even though I'm
using root. Like this one:
-rwxr-xr-x XF86_S3V 2043768
I thought I could at least run it and get an error, but Linux says: command
not found. I had this too when installing fortune. After logging in as a
user I could
Hi,
Can I telnet and ftp to my own computer? I tried pinging 192.168.1.1 (which
is this computer) but a ftp will not log me in, and a telnet either ?
Do I have to start a special demon ? And how should I do that ?
Gabrie
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
Christopher J. McNicholas wrote:
I installed a bunch of packages this weekend. Among them was Xlib6g.
Now when I try to start X, I get the message:
Can't load library libXmu.so.6
What do I need to do to get X running again?
$ dpkg -S libXmu.so.6
xlib6g: /usr/X11R6/lib/libXmu.so.6.0
Hi all,
I'm trying to use a few netgear FA310TX 10/100 cards ('cause they're cheap!).
Although they are based on the DEC 21140-AF chip (tulip) they don't seem to
work well (or at all) with even the most recent tulip driver. I tried a
Genuine DEC nic (500tx) with a 21140 and it worked fine.
A friend of mine is considering connecting a Linux machine to a DECNET network.
Are there any www resorces, READMEs HOWTOs etc that are relevant ?
Is it considered something unusual ?
Thank you.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
Gabrie van Zanten wrote:
Sometimes I see a program (I think) but I can't run it, even though I'm
using root. Like this one:
-rwxr-xr-x XF86_S3V 2043768
I thought I could at least run it and get an error, but Linux says: command
not found. I had this too when installing fortune. After
Run xf86 config again. When you get to the section that asks if the
following displays resolutions are correct, pick a color depth to change
and change/keep your existing resolutions but when asked if you want a
virtual desktop select No.
If you don't adjust your color-depths per
On Tue, 7 Apr 1998, Gabrie van Zanten wrote:
Hi,
Sometimes I see a program (I think) but I can't run it, even though I'm
using root. Like this one:
-rwxr-xr-x XF86_S3V 2043768
I thought I could at least run it and get an error, but Linux says: command
not found. I had this too when
On Mon, 6 Apr 1998, Usman Roshan wrote:
Hello everybody,
Does anyone know how to create filters in pine ? Thanks.
As other have mentioned, use procmail. This is a debian pacakge and along
with it is two other packages worth noting - procmail-lib, which is a
collection of useful procmail
On Mon, 6 Apr 1998, Ray Schultz wrote:
I am reading all these messages with Eudora 3.05 on a Win95 machine
and I don't think Eudora has a way to thread the subjects.
Eudora does allow you to sort by subject, though. As for me, if there's a
subject that I particularly want to watch, I have
Checkout the user document from Debian web site,
http://www.debian.org/doc/
There's an installation FAQ.
Christopher Kern wrote:
Actually I am not a debian user, (yet) but I am hoping to become one soon with
some help. I have an old 486/50 that I want to install it on, but I have
never
Joost Kooij [EMAIL PROTECTED] writes:
On Tue, 7 Apr 1998, Gabrie van Zanten wrote:
Hi,
Sometimes I see a program (I think) but I can't run it, even though I'm
using root. Like this one:
-rwxr-xr-x XF86_S3V 2043768
I thought I could at least run it and get an error, but Linux
I am using the emacs package (19.34) and am finding that
increasingly there are more and more packages (e.g. pcl-cvs) that
depend on either emacs19 or emacs20 and for some reason the emacs
package doesn't provide emacs19 as I would expect it should.
--Bill.
--
William R Ward Bay View
Apparently ckermit is no longer provided - I believe it used to be in
either non-free or contrib. Why is this?
--Bill.
--
William R Ward Bay View Consulting http://www.bayview.com/~hermit/
[EMAIL PROTECTED] 1803 Mission St. #339voicemail +1 408/479-4072
[EMAIL PROTECTED]
What happened to the tm package (mail utilities for Emacs)? It seems
to be gone from hamm now...
--Bill.
--
William R Ward Bay View Consulting http://www.bayview.com/~hermit/
[EMAIL PROTECTED] 1803 Mission St. #339voicemail +1 408/479-4072
[EMAIL PROTECTED] Santa
Gabrie van Zanten [EMAIL PROTECTED] writes:
Hi,
Can I telnet and ftp to my own computer? I tried pinging 192.168.1.1 (which
is this computer) but a ftp will not log me in, and a telnet either ?
Do I have to start a special demon ? And how should I do that ?
No, you just need to allow
On 6 Apr 1998, William R. Ward wrote:
Apparently ckermit is no longer provided - I believe it used to be in
either non-free or contrib. Why is this?
I assume that it was removed from frozen due to outstanding bugs that were
not fixed before the freeze but should be back at some point. Don't
I've installed Debian 1.3.1 on my Gateway Pentium Pro and I can't get the
mouse to work. I've received a lot of help from Rob Browning so I can
supply a lot of information but we have run out of ideas and could use some
help. Here's what we know:
The mouse is a PS/2 mouse. It works fine under
I got it to work, it was the fault of the HP Kayak, not the driver...
Bruce Dobrin
Multi Media Dept.
Sony Pictures Imageworks
310-840-8412
Never hit your Grandma with a shovel, it leaves a bad impression on her
mind
-Tiny Tim
--
To UNSUBSCRIBE, email to [EMAIL
Hi all,
I am having problems with user process's running away (taking up 99.8%
CPU time) on our linux server (primary examples being elvis and netscape).
Is there an easy way to get the server to recognise these - and kill them
off? I know elvis runs away if you close the xterm (or window
What happened to the tm package (mail utilities for Emacs)? It seems
to be gone from hamm now...
I think that no one ever updated it to the new standard for
emacs-related packages. There is a much newer version available,
too. I was going to work on it but I never got around to it.
--
I'm tryin to connect my Win95 and WinNT machines across why LAN through
a debian box and on to the NET. My debian box works fine on the net and
i can use Lynx. I feel it's got something to do with the way or where
i've configured my Gateway, DNS + Proxy server on all of my machines.
Also how do i
Thank you Mr. Elphick.
All I needed to do was install xlib6
It's always the simple things that inconvenience you, isn't it.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
There was a Linux Journal article about this some months (years?) back. I
think it was IKEA that had somehow managed to do this. I also notice a
file in /usr/src/linux/net/decnet/README that says this:
Yes.. it's being worked on.
If you want to get involved email me [EMAIL PROTECTED]
Is there a way i can use my Zoom 56k flex external port 2...under linux.??
I use somethin like a 27 pin to 9 pin cable... thanx in advance...
Please also include what i need to configurewhat i need to change
etc...
my e-mail is [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL
Þann 05-Apr-98 skrifar [EMAIL PROTECTED]:
Hi!
Works fine here with 2.0.32, X 3.3.2 , Matrox MilleniumII.
I had some problems with X 3.3.1 (screen locked). ATI Mach 64 was also OK,
S3 Trio64 was not. I guess you have a problem with your X-Server or Card.
Greetings, Ramin
I was
I get digest, so can't quote, but in a recent message it was explained
that Communicator 4.05 is libc6 and won't work with bo (as luck would have
it, I had 5.5 megs d/led over modem at that moment!). I'm running bo;
what's the latest version I should be d/ling?
Thanks in advance!
Devin
--
-BEGIN PGP SIGNED MESSAGE-
I sent this yesterday, but I wasn't subscribed to the list at that
time so I am 90% sure the message didn't get through. If it did, my
apologies.
Short version of question:
==
How do I load kernel modules from an initial ramdisk?
Long
Hi Hogland, Thomas E.; unless Mutt is confused, you wrote:
I know this can be done, but can't find the answer in the old digests...
Have a Compaq Presario with the ATI 3D Rage Pro card. Installed from CD,
set up X, used the listed Mach64 servers (for the Rage and Rage II) and
X dies with the
Yo-
I'm trying to use a few netgear FA310TX 10/100 cards ('cause they're cheap!).
Although they are based on the DEC 21140-AF chip (tulip) they don't seem to
work well (or at all) with even the most recent tulip driver. I tried a
Genuine DEC nic (500tx) with a 21140 and it worked fine.
On 6 Apr, Devin Wong wrote:
I get digest, so can't quote, but in a recent message it was explained
that Communicator 4.05 is libc6 and won't work with bo (as luck would have
it, I had 5.5 megs d/led over modem at that moment!). I'm running bo;
what's the latest version I should be d/ling?
-BEGIN PGP SIGNED MESSAGE-
On Mon, 6 Apr 1998, Usman Roshan wrote:
Hello everybody,
Does anyone know how to create filters in pine ? Thanks.
I get the feeling that most, if not all of the people who
replied to this message mis-interpreted the question (but I guess I might
be...).
Hello
I was hoping someone out there has had success installing Debin v1.3.1 onto an
IBM Thinkpad 760E.
The installations seems to go ok, but the machine simply does not boot.
Any help/instructions would be greatly appreciated.
many thanks
On Tuesday, April 07, 1998 1:56 AM, Gabrie van Zanten [SMTP:[EMAIL PROTECTED]
wrote:
1. I noticed on the CD I bought there is a dir called /bo/msdos-i3 full off
*.deb files of 0 bytes. This must be a mistake, not ?
There's nothing wrong with those files. Actualyy, they're just links to the
Hi,
Just try the Netscape Comunicator. It's mail (and news) program can order the
messages by thread . I was very pleased by that, especially some time ago when
I have had access to some news groups.
Ionutz
On Monday, April 06, 1998 11:58 PM, Ray Schultz [SMTP:[EMAIL PROTECTED] wrote:
Hello
Hi,
IIRC, as long as you keep your boot sector/partition within the lower 1024
sectors of your hard drive you should be alright. I've got a 9.1 GB SCSI
drive that works fine with my Debian system.
As a thought, if Linux couldn't handle large filesystems I don't anyone
would have
On Mon, Apr 06, 1998 at 11:20:05AM -0600, Fulgham, Brent/SCO wrote:
Is there a way to configure dselect-ftp to automatically retry
downloading packages during an FTP error?
For example, this weekend I did an install of hamm(frozen) using
dselect-ftp. Before bed I started things
Hi Debmeisters,
This isn't specificically a Debian question, but I'm hoping that the
combined knowledge locked up in this group might be able to point me in the
right direction...
I've recently acquired myself a little old laptop, which, with help from
the group, is now loaded up and chugging
The script I use to download .deb files uses libwww-perl, which is
apparently not very effective for FTP connections. I typically get
speeds of 2-2.5 kB/s using HTTP and 0.3 using FTP (this is over a 2.88
kB/s connection). Is there an HTTP site where I can download non-us
packages? The only
On Wed, 1 Apr 1998, Lindsay Allen wrote:
Here is a message on the subject which I saved some time back.
[snip]
echo -n Setting DPMS for text console:
setterm -blank 5 -powersave on # dpms on
echo -en \033[9;8]# suspend after 10 min
echo -en \033[14;10] #
Hallo,
at first please excuse my very bad english, but i have a big problem
by installing the DEBIAN-Linux on my new Pentium.
In the last years i have used a 486DX2/80 machine with 32 MB RAM. Its
works very good. There ar no problems with Linux.
Now i have additional an Pentium 166 with
On Mon, 6 Apr 1998, William R. Ward wrote:
The script I use to download .deb files uses libwww-perl, which is
apparently not very effective for FTP connections. I typically get
speeds of 2-2.5 kB/s using HTTP and 0.3 using FTP (this is over a 2.88
kB/s connection). Is there an HTTP site
This is the error I get
(Reading database ... 35660 files and directories currently installed.)
Preparing to replace dump 0.4b4-4 (using .../utils/dump_0.4b4-6.deb) ...
Unpacking replacement dump ...
dpkg: error processing /news/debian/hamm/main/binary-i386/utils/dump_0.4b4-6.d
(--install):
In article [EMAIL PROTECTED], Jason Gunthorpe [EMAIL PROTECTED] writes:
Try http://ftp.de.debian.org/debian-non-US/stable/binary-i386
Great, thanks!
Check the mailing list archives of debian-www for a more complete list.
I've never heard of debian-www; is that also on lists.debian.org?
Hi!
I have tried to print/convert to ps with acroread (levels 1 and 2) but it
generates a ps that is not understand by gs, so I can't view it or print.
The documents looks good with acroread but with xpdf I can only see the
first page, If I print it it prints with a different paper rather than
Hi,
[Sorry if this is off-topic.]
I have two files say, file1 and file2
file1 contains:file2 contains:
alpha alpha
bravo
charlie
What I want to do is compare the two files, and delete the contents of
file1 according to file2. So, from the
On Mon, 6 Apr 1998, Usman Roshan wrote:
Hello everybody,
Does anyone know how to create filters in pine ? Thanks.
use procmail, i.e.
---
Heute ist nicht alle Tage, ich komme wieder, keine Frage!!!
Joerg
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe.
Hi!
I have tried to print/convert to ps with acroread (levels 1 and 2) but it
generates a ps that is not understand by gs, so I can't view it or print.
The documents looks good with acroread but with xpdf I can only see the
first page, If I print it it prints with a different paper
On Tue, 7 Apr 1998, George Bonser wrote:
What I want to do is compare the two files, and delete the contents of
file1 according to file2. So, from the above, I'll have to delete the word
alpha from file1. Can it be possible using sed? or awk?
Hehe, try grep!
grep -vFf file2 file1
hi
only 4 info :)
-Forwarded message from Michal Zalewski [EMAIL PROTECTED]-
Sender: Bugtraq List [EMAIL PROTECTED]
From: Michal Zalewski [EMAIL PROTECTED]
Subject: mailrc and pine security holes
To: [EMAIL PROTECTED]
Many of mailcap-compatible unix mail clients have several
Hello all --
I have recently been trying to make a bootable Debian installation on a
Jaz drive. I did this by using 'cp -a' to transfer files from my scsi
hard drive to the Jaz drive. I then changed the Jaz drive version of
/etc/fstab so that it would mount /dev/sdb1 (the jaz
I had to back out of exim 1.90-2 because the eximconfig script
bombed. I don't know why, but when I installed 1.89.1-1, the script
ran perfectly.
This is by leaps and bounds the easiest mail transport agent I have
yet to install. I don't know yet whether it works: I'm encouraged.
Eximon
Hallo all,
what has happend to the debian-announce-mailing-list? Since Bruce left, I
have not seen any announcments made to this list. Is it dead now? Where then
can I get the latest news about debian in a similar form ( = low volume list,
only the important news, rumors 'n' stuff like e.g.
When trying to install lib6 and many x-related packages to get x running, I
keep being unable to install them, as dpkg tells me that I haven't got
libICE something-or-other. I looked thru www.debian.org/packages and can't
find it.
Also one of the packages says it needs ccp whatever that is.
Since hamm was frozen, I started the process of updating my bo system.
I've been running hamm now for a week or so, and using FTP to update all of my
out-of-date
packages.
Last night I installed some of the new packages, ( of which the only important
one I remember
was sysvinit ), and when I
On Mon, 6 Apr 1998, Hamish Moffatt wrote:
I just installed the fvwmconf package, which includes a menu
entry /usr/lib/menu/fvwmconf, which looks fine to me, but it hasn't
made it into menudefs.hook for fvwm2 or fvwm95. Just to be sure
I can update-menus again as root and it still didn't make
I want to include in a debian distrib some programs, configs etc..
If i can do that i would like to make an CD to install this version on
my computers.
Do you have HOWTOs, URLs or other that can explain me how to do ?
--
Julien Ortega -- EXTERN
e-mail: [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email
Hi all again!
First of all thanks for your reply
In a mistake I delete your last mail, so I'm not sure if you talked about
5.* version of gs-aladdin in bo distribution
I have no found a newer version of gs aladdin than 4.03-7 from the non-free
directory,
this still have problems to handle
Tristan Day wrote:
When trying to install lib6 and many x-related packages to get x running, I
keep being unable to install them, as dpkg tells me that I haven't got
libICE something-or-other. I looked thru www.debian.org/packages and can't
find it.
libICE.so is in xlib6 (for libc5) or
Hello,
I have a problem that should have a really simple answer that I
nevertheless have not been able to find. I have an old, powerweak computer
into which I have just been able to fit emacs and latex. This works fine,
but: How to print DVI files? The printer I dispose of is an old Citizen
Ossama Othman [EMAIL PROTECTED] writes:
Everytime I send a message to the Debian list, I get the below response
from [EMAIL PROTECTED] However, in all cases I sent no Cc or message
to France (fr, right?) Suggestions?
Most likely, [EMAIL PROTECTED] is subscribed to debian-user, but the
On Mon, Apr 06, 1998 at 11:42:50PM -0500, [EMAIL PROTECTED] wrote:
Since hamm was frozen, I started the process of updating my bo system.
I've been running hamm now for a week or so, and using FTP to update all
of my out-of-date packages. Last night I installed some of the new
packages, ( of
On Tue, Apr 07, 1998 at 01:07:30PM +0200, Ulisses Alonso Camaro wrote:
Do you have a gs-aladdin compiled for libc5?
ftp://ftp.debian.org/debian/bo-unstable/binary-i386/gs-aladdin_5.10-2bo3.deb
HTH,
Ray
--
PATRIOTISM A great British writer once said that if he had to choose
between betraying
Hi,
As a thought, if Linux couldn't handle large filesystems I don't anyone
would have bothered implementing RAID for Linux. :)
It's already done. I'm running here with 2 0.5GB scsi disks as RAID-0
with /var mounted there. Also something like 20+20mb swap partitions
on those drives
I imagine that SyQuest's external parallel port drive isn't supported
under Linux, but what about the internal IDE version?
Does anybody have experience with these drives? They're nearly half the
price of Jaz drives. Seems like a good alternative to tape for backup,
and a nice place to keep my
-BEGIN PGP SIGNED MESSAGE-
I imagine that SyQuest's external parallel port drive isn't
supported
under Linux
Actually, it is. See my earlier message. If you're using 1.3.1,
you'll need to load kernel modules from http://www.torque.net/linux
pp.html, if you're using anything more
Julien Ortega [EMAIL PROTECTED] writes:
I want to include in a debian distrib some programs, configs etc..
If i can do that i would like to make an CD to install this version on
my computers.
Do you have HOWTOs, URLs or other that can explain me how to do ?
Well, I suggest you look at what
I've used a thing called grok some, but not extensively. It may
be just what you are looking for. From the help intro:
Grok is a program to present unstructured data in a
row/column format using an index card paradigm. Each
database row (line) is a card; each database column
I use Gnus - a powerful, customizable news- and mail-reading part
of emacs (and xemacs). It will thread, score, sort and do just
about anything you want to your mail.
Mike
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Tue, Apr 07, 1998 at 12:55:48AM -0700, George Bonser wrote:
On Tue, 7 Apr 1998, George Bonser wrote:
Hehe, try grep!
grep -vFf file2 file1
should do it.
For newbies:
The original poster wants to filter file1 using file2. The output should
contain everything in the input
Hi!
Phone fees prevent me to mirror over my modem. But since I have access to a
fast connection at my university, I practice a 2-step method: Make a list of
files to get on my local machine runing
mirror -n other options | sed -n 's/^get file \(.*\) as .*/\1/'
and use the fast connection to
On Mon, 6 Apr 1998, Jonas Bofjall wrote:
: How can hamm go into frozen when dselect-over-FTP hasn't been fixed yet?
: When will it be fixed (I recently tried the 98-03-29 disk set)?
It's frozen so those problems can be fixed. Frozen means no more
changes other than bugfixes, not ready
-BEGIN PGP SIGNED MESSAGE-
A. M. Varon wrote:
I have two files say, file1 and file2
file1 contains:file2 contains:
alpha alpha
bravo
charlie
What I want to do is compare the two files, and delete the contents of
file1
I have made a mistake with a floppy tape and am having trouble recovering. The
tape works fine but I just did an mt command on an unformated tape and the
process hung. I tried kill, kill -9, neither of which worked. ps and top both
showed it as running. So I killed the xterm it was running in.
Does it print at 600 dpi, or at 300dpi ... the specs show 600 dpi with
REt, which I was afraid might be a Windoze sort of thing ...
I am pretty sure that HP specifications refer to resolution before
their REt enhancements. This is unlike Okidata who often quote
Great. I don't care
On Tue, 7 Apr 1998, Oliver Elphick wrote:
Tristan Day wrote:
When trying to install lib6 and many x-related packages to get x running, I
keep being unable to install them, as dpkg tells me that I haven't got
libICE something-or-other. I looked thru www.debian.org/packages and can't
the problem:
my X desktop is 4 time wider than my available space on the monitor and
the resolution is not good either.
what i tried:
i played a bit with XF86Config making only a change at a time (and keeping
a backup of the last configuration that worked too),this hasn't worked,i
george wrote,
Wow, a question to an answer in 3 minutes! that's very fast thanks.
Can you get THAT from Microsoft ;)
does getting to a device that will send you the wrong irrelevant fax and
charge your credit card count?
:)
--
These opinions will not be those of ISU until it pays my
Does anyone know of an object-oriented database that uses the odmg c++
bindings and run under Linux. I have been using poet and o2, but from
what I can tell they have no Linux version available.
Thanks in advance.
--Aaron Cantrell
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
On Tue, Apr 07, 1998 at 08:19:10PM +1000, Alan Eugene Davis wrote:
I had to back out of exim 1.90-2 because the eximconfig script
bombed. I don't know why, but when I installed 1.89.1-1, the script
ran perfectly.
eximconfig shouldn't run on upgrades, so I'm surprised it tried to run it
I have the following ld.so.conf file:
/usr/X11R6/lib/Xaw95
/usr/X11R6/lib/Xaw3d
/usr/local/lib
/usr/lib/libc5-compat
/lib/libc5-compat
/usr/X11R6/lib
/usr/X11R6/lib
/usr/X11R6/lib
Question: Shouldn't /usr/X11R6/lib be before the libc5-compat directory
and shouldn't there only be one of them?
Someday I'm going to learn to never upgrade netscape once I have it working.
I had 3.0.1 quite happy, and I tried 4, which lacked the features I used. So
i tried to go back, and got a usable but broken install. Then I tried mozilla
5, and everything broke.
So after a couple of install/purge
On Tue, 7 Apr 1998, Johan Wilhelm Kluwer wrote:
I have a problem that should have a really simple answer that I
nevertheless have not been able to find. I have an old, powerweak computer
into which I have just been able to fit emacs and latex. This works fine,
but: How to print DVI files? The
Hello,
If you or someone you know has an available email server we are interested in
renting it by the month.
The server must be located outside of the United States and must strip all
incoming headers.
The server will be used for Bulk Emailing Purposes.
We will pay $500 United States
On Tue, Apr 07, 1998 at 01:39:59PM -0400, Brian White wrote:
I have the following ld.so.conf file:
/usr/X11R6/lib/Xaw95
/usr/X11R6/lib/Xaw3d
/usr/local/lib
/usr/lib/libc5-compat
/lib/libc5-compat
/usr/X11R6/lib
/usr/X11R6/lib
/usr/X11R6/lib
Question: Shouldn't /usr/X11R6/lib be
/usr/X11R6/lib/Xaw95
/usr/X11R6/lib/Xaw3d
/usr/local/lib
/usr/lib/libc5-compat
/lib/libc5-compat
/usr/X11R6/lib
/usr/X11R6/lib
/usr/X11R6/lib
Question: Shouldn't /usr/X11R6/lib be before the libc5-compat directory
Not necessarily. As long as you don't have any duplicate
Lately I was forced into single user mode while booting because e2fsck had
discovered some problems with the HD.
I was able to pass that after e2fsck -c. However, althought the fs is now
states itself as clean, running e2fsck -f still shows some errors (problems ?).
1) Could it be that this is
There are kdelibs and kdesupport Debian packages on your site; is there
a kdebase one on the way too?
--
Graham Pople ([EMAIL PROTECTED])
SNES emulators at Emulation One (http://www.jalna.demon.co.uk/index.htm)
All emulators at E1 Newsletter (http://www.jalna.demon.co.uk/e1news.htm)
--
To
Johan Wilhelm Kluwer [EMAIL PROTECTED] wrote:
How to print DVI files? The printer I dispose of is an old Citizen
dot-matrix,[..] I'm confident that [using Ghostscript]
would be *very slow indeed*.
I think so. I used to have a dot-matrix, and it could take up to 10
minute to print a page. If
On Tue, Apr 07, 1998 at 03:10:11PM -0400, Brian White wrote:
/usr/X11R6/lib/Xaw95
/usr/X11R6/lib/Xaw3d
/usr/local/lib
/usr/lib/libc5-compat
/lib/libc5-compat
/usr/X11R6/lib
/usr/X11R6/lib
/usr/X11R6/lib
Question: Shouldn't /usr/X11R6/lib be before the libc5-compat
On Tue, 7 Apr 1998, Damon Muller wrote:
This isn't specificically a Debian question, but I'm hoping that the
combined knowledge locked up in this group might be able to point me in the
right direction...
I've recently acquired myself a little old laptop, which, with help from
the group, is
WHOEVR YOU ARE:
DO NOT SEND BULK MAIL TO THIS LIST.
THE MAIL SERVERS THIS LIST USES ARE DONATED FREE, GRATIS, SO THE MEMBERS
CAN DEVELOP FREE SOFTWARE. YOU COST THIS PROJECT MONEY, REAL MONEY BY
SENDING SPAM TO THIS MAILING LIST
DO NOT SEND BULK MAIL TO THIS LIST.
YOU HAVE GONE TO A GOATS
Hi!
Does anybody have any experience with UltraSparc and GNU/Linux? I
know bo is not made for Sparc, but i think hamm is. A friend of mine
installed latest available version of RedHat for Sparc (4.2), and is
having troubles adjusting keyboard layout (is an spanish version of
keyboard).
Pancho Horrillo wrote:
Anybody has tried hamm in a Sparc? If so, is it available in NFS
somewhere?
nfs llug.sep.bnl.gov:/home/pub/debian
Tim
--
(work) [EMAIL PROTECTED] / (home) [EMAIL PROTECTED] - http://www.buoy.com/~tps
Why am I soft in the middle, and the rest of my life is so hard?
Brian White [EMAIL PROTECTED] on Tue, Apr 07, 1998 at 01:39:59PM -0400:
Question: Shouldn't /usr/X11R6/lib be before the libc5-compat directory
and shouldn't there only be one of them?
I'm not certain, but I don't think that the end result (ld.so.cache?) is
in any way affected by parse order.
With a lot of luck I've succeeded in putting up a hamm system from
scratch. Now I want to make identical installations on a couple of
machines with almost identical hardware.
What is the easiest way? Can it be automated (I bet many people has
done this before..)? If I have to do it by tarring the
Is there a way to find the .config of a pre-built kernel? I know
with FreeBSD you can, I was hoping it could save myself some guesswork.
Micro$oft, what do you want to spend today?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
just found something that i thought was sorta cool ... so i figured i
would pass it along.
i had been wondering how pine knew to automatically launch lynx when it
receives an html attachment ... and traced it down to a line in
/etc/mailcap.
next i decided that i wanted it to launch Netscape
Work-Needing and Prospective Packages for Debian GNU/Linux
[EMAIL PROTECTED]
$Id: prospective-packages.html,v 1.9 1998/04/07 21:36:24 johnie Exp $
This document is intended to identify areas that need your
contributions. It
Dan Winkler wrote:
SNIP
The mouse is a PS/2 mouse. It works fine under Windows 95. It does not
work at all under Linux. When I run XF86Setup, I select PS/2 mouse and set
the device to be /dev/psaux and apply the changes, but moving the mouse
does not move the cursor.
/SNIP
Does the mouse
1 - 100 of 103 matches
Mail list logo
