David decía:
Primero hice: apt-get update
Luego hice: apt-get -f dist-upgrade
Pero aquí es donde se queda. Dice que necesita bajar X Mb. de archivos,
los baja, los intenta instalar y cuando intenta con les tres que dije en
el anterior mensaje aborta la actualización.
Mi consejo:
# dpkg
Enzo A. Dari wrote:
Me parece que los casos que mencionás estarían claramente en
la categoría de recomendados (Recommends), algo intermedio entre
sugeridos (Suggests) y exigidos (Depends o Pre-Depends).
Yo suelo instalar todos los recomendados y no siempre los sugeridos,
estoy en peligro ?
David wrote:
Primero hice: apt-get update
Luego hice: apt-get -f dist-upgrade
Pero aquí es donde se queda. Dice que necesita bajar X Mb. de archivos,
los baja, los intenta instalar y cuando intenta con les tres que dije en
el anterior mensaje aborta la actualización.
He intentado hacer
Hola a todos:
He instalado en slink el paquete ispanish y cuando intento utilizarlo
desde xemacs (cambiando el diccionario con el comando
ispell-change-dictionary) no me aparece en la lista. Por otra parte,
viendo los archivos creados al instalar el paquete, veo:
Ramiro Alba wrote:
He instalado en slink el paquete ispanish y cuando intento utilizarlo
desde xemacs (cambiando el diccionario con el comando
ispell-change-dictionary) no me aparece en la lista. Por otra parte,
viendo los archivos creados al instalar el paquete, veo:
Sorribes juan escribió:
Alguien sabe como configurar el smartlint para restringir que cualquiera
pueda enviar mail a una lista.
Configuro el accept con la dirección de mail que quiero que solamente pueda
enviar mail a la lista y dentro del rc.init y rc.custon donde dice
foreing_submit pongo
On Thu, 1 Jun 2000, Jaime E. Villate wrote:
A propósito, ¿que MTA usas? yo tuve que usar sendmail porque no logré
poner a funcionar el exim con el smartlist.
Para que smartlist y exim funcionen bien el uno con el otro hay que
hacer los siguientes cambios en /etc/exim.conf:
* Añadir una línea
Jaime E. Villate wrote:
Ramiro Alba wrote:
He instalado en slink el paquete ispanish y cuando intento utilizarlo
desde xemacs (cambiando el diccionario con el comando
ispell-change-dictionary) no me aparece en la lista. Por otra parte,
viendo los archivos creados al instalar el paquete,
On jue, 01 jun 2000, Hue-Bond escribió:
El jueves 01 de junio de 2000 a la(s) 01:49:31 +0200, Rodolfo García contaba:
me queda el tema del rsync, y no perder correo.
No entiendo lo que quieres hacer con rsync. Ya ves que yo no lo
he metido por medio para nada. :^?
Ahora
Hola:
He ido al despacho esta mañana y al fin he visto que mensaje me daba:
El mensaje no se pudo enviar, el servidor rechazó la dirección de correo
electrónico del remitente '[EMAIL PROTECTED]' Cuenta '192.168.1.1' Servidor
'192.168.1.1' Protocolo smtp Respuesta del servidor: 554 buildaddr:
El jueves 01 de junio de 2000 a la(s) 13:30:03 +0200, Rodolfo García contaba:
Ahora mando, escribo, ... y
borro mails. El tema está solucionado hasta que quiero actualizar los buzones
del sobremesa, que es donde quiero que el mail se guarde, para eso quiero
usar rsync, pero no se como hacerlo y
He ido al despacho esta mañana y al fin he visto que mensaje me daba:
El mensaje no se pudo enviar, el servidor rechazó la dirección de correo
electrónico del remitente '[EMAIL PROTECTED]' Cuenta '192.168.1.1' Servidor
'192.168.1.1' Protocolo smtp Respuesta del servidor: 554
buildaddr:
On Wed, May 31, 2000 at 02:39:23PM +0200, Jordi Mallach wrote:
También creo que mi opinión sobre Motif ha estado siempre negativamente
condicionada por su 'non-freeness' y porque lo relaciono a bus error. Se
que Motif no tiene la culpa, pero inconscientemente he ido haciendo esa
relación :)
Hola, cada vez que mandas un mensaje a debian-user-spanish al tomarlo con
fetchamail desde mi linux se me queda esperando un buen rato y luego sale
por timeout, en definitiva me bloqueas la cuenta a partir de tu mensaje.
Los mensajes que aparecen en xconsole son los siguientes:
Jun 1 15:15:12
Danito wrote:
On Wed, May 31, 2000 at 02:39:23PM +0200, Jordi Mallach wrote:
También creo que mi opinión sobre Motif ha estado siempre negativamente
condicionada por su 'non-freeness' y porque lo relaciono a bus error. Se
que Motif no tiene la culpa, pero inconscientemente he ido haciendo
On Thu, Jun 01, 2000 at 03:34:14PM +0200, Miguel Rodriguez Penabad wrote:
Disculpa por mi ignorancia pero ¿que has querido decir con bus error?
No sé por qué, pero me da que es el netscape, que está linkado contra
motif y tiene la santa manía de, cuando le da la gana (y suele darle
mucho
Hola
Tengo el problema que cuando accedo al servidor ppp que cree solo
puedo ver este Host no puedo llegar a otras direcciones.
Jose Luis me comento
Concretamente la opción está en el menú 'Network Options' y
se llama 'IP: forwarding/gateway'. En estos momentos la
tengo delante. Sin
Agustín Martín Domingo wrote:
Instala el paquete ispanish que está en
http://corbu.aq.upm.es/~agmartin/linux/store/debian
Me he hecho cargo hace poco del paquete tutelado por Enrique Zanardi y
ya he arreglado esos gazapillos. Además es una versión superior que la
que está en slink.
Estimados compañeros:
Quiero hacer copias automáticas y completas de todo el sistema sobre una
unidad de cinta.
¿Cómo lo haceis vosotros?
Pensaba hacerme un script (con tar, cpio, dd o dump) y lanzarlo con el
cron por la noche, pero he visto en potato varios programas de copias de
seguridad
Jordi Roman Mejias wrote:
redir --lport=4000 --caddress=10.direccion.as.400 --cport=23
--bind_addr=10.direccion.linux
que lo que hace es cuando un paquete llege al puerto 4000 del linux lo
reenvia al puerto 23 (telnet ¿Tiene telnet un AS400?) a traves de la
direccion IP
Hola.
Puede que esta sea una pregunta más sobre C++, pero probaré.
Creo (aunque no estoy del todo seguro) que los paquetes 'libg++2.8.2' y
'libg++2.8.2-dev' han creado el directorio /usr/include/g++-2/ en mi Linux
donde (entre otros) está el archivo 'String.h'.
Cuando incluyo
Cuando: mar, 30 de may de 2000, a las 11:19:52 +0200
Quien: Hue-Bond
Que: Re: SAI
Me he comprado el 500, con conexión serie. Incluye un cable de
4 hilos que va desde el RJ11 del aparato hasta el puerto serie.
Sí, el 1200 también lo tiene.
Funciona bien y es
Hola, aquí os pongo el resultado de las soluciones que me habéis
planteado ( los mismos mensajes que me daban antes ):
Ejecuto: dpkg --configure --pending
Resultado: un montón de dependencias de xbase
En una de las ocaciones el apt me borro archivos, creo que
intentando
actualizar
Hola lista,
Tengo la oportunidad de escoger entre 2 servers en teoria compatibles
con Linux, aunque dudo que todo ande como por una autopista con la
version de kernel que trae la potato...
La verdad es que el Hardware-HOWTO no esta muy actualizado asi que
recurro a vosotros: alguien a tenido
El jueves 01 de junio de 2000 a la(s) 15:24:07 +0200, Javier Viñuales Gutiérrez
contaba:
Parece que este mensaje no era para la lista, pero da lo mismo.
[EMAIL PROTECTED]... Sender domain must resolve
Creo que este es el problema :^).
[EMAIL PROTECTED]
--
Just do it.
On jue, jun 01, 2000 at 10:56:20 +0200, Hue-Bond wrote:
El jueves 01 de junio de 2000 a la(s) 15:24:07 +0200, Javier Viñuales
Gutiérrez contaba:
Parece que este mensaje no era para la lista, pero da lo mismo.
Te aseguro que si, la rpóxima pego la cabecera que veo en el telnet
-s unsubscribe
Olá pessoal,
Sou novo na distribuição Debian e apanhei muito na sua instalação,
alguém pode me auxiliar na instalação ou conhece alguma URL que forneça
esses dados!!??
Valeu!
De: Fabio da Silva Santos [mailto:[EMAIL PROTECTED]
Sou novo na distribuição Debian e apanhei muito na sua instalação,
alguém pode me auxiliar na instalação ou conhece alguma URL
que forneça
esses dados!!??
URLs: http://debian.org./
Valeu Leandro pela URL,
O que aconteceu foi o seguinte, quando aparece uma tela para selecionar
os pacotes para instalação, diz a tela que para selecionar eu teria que
pressionar o + só que aperto o + para todos, só que não consigo
prosseguir, já aconteceu algo parecido com alguém da lista??
De: Fabio da Silva Santos [mailto:[EMAIL PROTECTED]
O que aconteceu foi o seguinte, quando aparece uma tela para
selecionar
os pacotes para instalação, diz a tela que para selecionar eu
teria que
pressionar o + só que aperto o + para todos, só que não consigo
prosseguir, já aconteceu
De: Fabio da Silva Santos [mailto:[EMAIL PROTECTED]
que meu inglês é meio fraquinho, se vc tiver algo sobre o
dselect pode me
passar??
Muito da documentação sob http://debian.org./doc/ está traduzida,
por exemplo http://www.debian.org/releases/stable/i386/install.pt.html...
De: Fabio da Silva Santos [mailto:[EMAIL PROTECTED]
Como faço para ter um email @debian.org?? heheh :))
Tornando-se um desenvolvedor... para isso, ou você colabora na
documentação (inclusive traduções, se não me engano), ou na advocacia, ou
empacota algum programa ainda não
http://www.linuxsolutions.com.br/debian-br
Tem alguma documentacao la.
On Thu, Jun 01, 2000 at 02:17:03PM -0300, Leandro Dutra wrote:
De: Fabio da Silva Santos [mailto:[EMAIL PROTECTED]
O que aconteceu foi o seguinte, quando aparece uma tela para
selecionar
os pacotes
ola pessoal, estou querendo instalar o debian, mas nao sei onde nem o q baixar
os mirrors brasileiros (q sao os unicos na america latina) nao estao mais
no ar, e eu nao sei o q baixar, uma vez q eu sou iniciante em linux e nos
ftps encontro um monte de diretorios, dos quais nao sei quais sao
Como me cadastro??!!
On Wed, May 31, 2000 at 09:11:00PM -0500, Scott Graves wrote:
Is there a HOWTO on configuring SSH?
I found http://www.csua.berkeley.edu/ssh-howto.html useful. The SSH FAQ
is at http://www.employees.org/~satch/ssh/faq/
I was wondering which file I need to edit to allow hosts using
RSA-based
On Thu, Jun 01, 2000 at 10:06:53AM +1000, Jordan Howarth wrote:
[SNIP]
xdm never reads Xresources
[SNIP]
I'm not clear on whether this is causing your problem, but the bug
(#64943) looks to be fixed in the next update to xfree86-common
xdm upgrade, and it seems like an arbitrary hack that
On Wed, May 31, 2000 at 06:37:57PM -0700, Eric G . Miller wrote:
Have you configured the parport_pc (io, irq, dma)? You may also want to
fiddle with the BIOS configuration of the parport communication system.
For instace, I have:
options parport_pc io=0x378 irq=7 dma=5
Don't the
Tim;
This was a problem with the kernel scsi code and was fixed in
newer versions. You need a newer kernel to install.
Mike
[EMAIL PROTECTED]
On Wed, May 31, 2000 at 05:25:31PM -0500, Tim Willis wrote:
On Wed, May 31, 2000 at 11:55:50AM -0500, Tim Willis was only
escaped alone
On Thu, Jun 01, 2000 at 03:17:53AM +, Thiago wrote
I'm tring ti use PHP with MySQL,
but every time I receive this message!
Fatal error: Call to unsupported or undefined function mysql_connect() in
/www/http/mysql_test.php3 on line 12
How do I recompile the PHP to enable MySQL support?
hi
...pls excuse the dumb-ness of this qstn, but how do I tell if I'm running
php3-apache OR php3-cgi? does the former run automatically when apache runs?
(provided there's a valid php3.ini file). If so, then how does php3-cgi run?
thanks
Andrew
Hi -Posted yesterday morning with a problem I was having with NFS-common
at boot. The problem was:
starting NFS common: statd lockd rpc.statd forgot to set AF_INET in udp
sendmsg. FIX IT!
Just to see I decided to remove the NFS COmmon package. I did this and
rebooted. I then noticed that the
Hi All,
Is it possible to create and read CDs with transparently compressed
files (-z option in mkisofs) under debian?
How to do it? How to create the files suitable for transparent
decompression? Are they just the standard gzip compressed files?
--
TIA
Well, including that didn't work, I didn't have a bad patch, I had already
downloaded the whole tree, but I did it again and it compiled fine ;-)
Thanks,
Ron
On Wed, 31 May 2000, Chris Gray wrote:
On Thu, Jun 01, 2000 at 01:50:41AM +0200, Ron Rademaker wrote:
Alright, I include the header in
Okay - bear with me for the explanation on this.
I work at a secondary school (3)... we have a room of Macintoshes, with
27ish LC2s on ethertalk (10baseT ethernet). They tend to die in
interesting and expensive to fix ways (1)
The current Macintosh server is a SE/30 with 16 Mb ram and a 2G
Hi there...
I was doing an apt-get dist-upgrade... and when it
just dowloaded all
'E: Internal Error. Cannot configure a pre-depend'
???
I have tried with dselect, and the same error
appears...
im totally lost here anyone?
Thanks.
Hi. For 2.2.12: I'm recompiling the tulip.c network card driver, which
wants to include modversions.h, which in turn wants to include
linux/modules/*.ver. But they're not there. When/how are these .ver files
built?
Thanks for any info,
John N.
Is there a free tool to draw E-R diagrams out there?
Thanks!
--
Arcady Genkin
Nostalgia isn't what it used to be.
Arcady Genkin [EMAIL PROTECTED] wrote on 01/06/2000 (13:30) :
Is there a free tool to draw E-R diagrams out there?
Have you looked at dia?
http://www.lysator.liu.se/~alla/dia/dia.html
PS: Why isn't there a reply-to the list address on this list.
--
Preben Randhol -- [EMAIL PROTECTED] --
Your upgrade gives you some trouble, I've had it too, the way I fixed it
is not a real nice way but it worked. I did the following:
Went to the directory where apt downloaded to, used dpkg several times
with all kind of --force options, after lots of puzzling which package I'd
do next and what
On Thu, Jun 01, 2000 at 13:39:22 +0200, Preben Randhol wrote:
PS: Why isn't there a reply-to the list address on this list.
http://www.unicom.com/pw/reply-to-harmful.html
HTH,
Ray
--
POPULATION EXPLOSION Unique in human experience, an event which happened
yesterday but which everyone
Preben Randhol [EMAIL PROTECTED] writes:
Is there a free tool to draw E-R diagrams out there?
Have you looked at dia?
http://www.lysator.liu.se/~alla/dia/dia.html
Thanks! Looks cool.
PS: Why isn't there a reply-to the list address on this list.
Because they are evil and some RFCs
Hi!
(1) If I use apt-get to install a package, the package's name is simple or
full?
apt-get install apache or apt-get install apache_1.3.12-1.deb ?
(2) If I only want to upgrade a package not whole system,
Is the command apt-get upgrade package or
apt-get install package_newversion.deb?
Thanks
Hi there,
This sounds like the Adaptec 2940 problem with some early cards
and the number of SCSI drivers in the boot disks. Do you have a 2940
card? There were some boot disks around that fixed this problem,
unfortunately I can't remember where they were. Perhaps others can tell
you. I
It's apt-get install apache, do not include version or .deb
Upgrading only that one package is apt-get install package, again not with
version number or .deb
Ron Rademaker
On Thu, 1 Jun 2000, Alex Kwan wrote:
Hi!
(1) If I use apt-get to install a package, the package's name is simple or
I am noticing several problems with all things X on my
potato system. Namely:
In enlightenment, I can't seem to get any of the
themes apart from Brushed Metal BlueSteel to work.
Any other I have tried has come up with errors such as
no title bars, and not being able to use any of the
menus.
On Thu, Jun 01, 2000 at 05:47:42 -0700, Robert Martinovic wrote:
This is just my inexperience, but if I'm starting up through xdm, which
file and how, do I get 32 bit colour instead of 8bit?
In /etc/X11/XF86Config, put DefaultColorDepth 32 in the Screen section,
or add -bpp 32 to the
Hi all,
I recently found out that neither talk nor identd were working and
after reloading inetd the following errors appeared in syslog.
inetd[9663]: ntalk/udp: unknown service
inetd[9663]: ident/tcp: unknown service
Now, I purged and reinstalled pidentd and talkd but no change.
In
Hi all,
I have a Pentium III with a Adaptec SCSI Card and I'm trying do install
slink at this computer.
The boot is hanging at the following lines:
(scsi 0) Adpatec AHA-294X Ultra SCSI host adapter found at PCI 9/0
(scsi 0) Wide Channel, SCSI ID=7 16/255
On Thu, Jun 01, 2000 at 02:32:35 +, john smith wrote:
then any kind of voip that can communicate with both linux and windows.
Have you looked at http://www.openh323.org/ ?
Ray
--
POPULATION EXPLOSION Unique in human experience, an event which happened
yesterday but which everyone swears
Dear expert,
I have a problem. I want to use HTML inside an e-mail message
but have no idea how. Let's assume the e-mail composer and
receiver are providers like yahoo, hotmail, outlook etc,
in other words: mail providers which support MIME messages.
I want the html of course to 'show up'
As some of you may know there exists an instruction in
most Pentium class cpus that returns a character
string which identifies the maker of the chip. For
example an Intel cpu returns Genuine Intel, Amd
cpu's return Authentic AMD. Cyrix cpu's return
Cyrix Instead. Note that the string is
Quoting Martin Jochems ([EMAIL PROTECTED]):
I have a problem. I want to use HTML inside an e-mail message
Oh I see. That gets rid of your problem, and makes it
everybody else's problem.
I want the html of course to 'show up' (executed) immediately,
Oh I see. I presume your recipients are
Yes, leased line signalling is different. You have to have a modem which
supports
leased line operation. I remember in the past an external modem I had which
could do
this. I don't recall the brand/make.
Lehel Bernadt wrote:
Hi folks,
I'm thinking on switching from a dial-up connection to a
This is a bigger issue than you surmise. RAID collections are activated after
the
system boots because information about the RAID set has to be fed to the RAID
drivers. It's possible someone has devised a way of feeding this information to
the
kernel at boot time. These problems can be
On Thu, 01 Jun 2000 01:15:12 +0300, Lehel Bernadt writes:
I'm thinking on switching from a dial-up connection to a leased line. Is there
anything special my modem (3com usr 56k ext) has to know to do this (ie. to de
al with the differences between a normal telephone line and the leased one) ?
Martin Jochems wrote:
Dear expert,
I have a problem. I want to use HTML inside an e-mail message
but have no idea how. Let's assume the e-mail composer and
receiver are providers like yahoo, hotmail, outlook etc,
in other words: mail providers which support MIME messages.
Sending HTML
Hello Group,
I trying to setup a Software Raid system on my Potato box. I have installed
the Raidtools2 and install a second ide drive. The How to's talk about
raidtab file. I assume they mean I have to create it myself. Does anybody
have any experience doing this? I made the file and placed it
Tom Furie wrote:
On Wed, May 31, 2000 at 05:19:28PM +0200, Allan Andersen wrote:
rsync -av ftp.sunet.se::pub/os/Linux/distributions/debian/dists/potato/
/home/ftp/linux/distributions/debian/dists/
This line should be enough since from the man page:
-a, --archive
This is
Hi,
I get lots of the following error messages in my syslog. What does this mean?
kernel: isdn_ppp_skb_push:under 0 2
Each entry has different nummbers.
Thanks.
Sven
Hi,
I've configured the E menu to launch every app but one and I can't figure
out why. What am I missing?
XEyes NULL exec xeyes
XClock NULL exec xclock
XLogo NULL exec xlogo
The xlogo will not run when activated through the menu. Yet it will run from
a terminal. Anyone have any ideas as to why
john smith wrote:
Hi,
I would like to install a voip software that is compatible with yahoo
messenger's voice chat. Any recommendations? if not yahoo, then any kind of
voip that can communicate with both linux and windows.
This question was asked on slashdot last week and it received some
How do I register KDE as a window manager in potato? Also, how do I get
rid of the annoying icons left by a previous scheme in KDE? Thanks.
Please 'CC' me in a reply.
How do I register KDE as a window manager in potato? Also, how do I get
rid of the annoying icons left by a previous scheme in KDE? Thanks.
Please 'CC' me in a reply.
Supposing that you have it installed already and that it is in /usr/bin
you could do the following:
a) update
If you are talking about ISDN lines, then you can get faster speeds than
33.6kbps by using multiple B channels bundled together, but I am not
sure about the cost.
Dan
Jens B. Jorgensen [EMAIL PROTECTED] wrote:
Yes, leased line signalling is different. You have to have a modem
which
does anyone know of a free software equivalent of partition magic? including
the ability to alter the size and features of existing partitions? i'm thinking
it's about time there was one and i might get desperate enough to write my
own if anyone else thinks it's a good idea (don't quote me on
Antonio Rodriguez wrote:
I have been looking at the info xfstt, and i really didn't understand whats
that with xset fp+ unix/:7101
Can you explain what this means, and what exactly I have to do?
Okay, this is of the top of my head, because I don't have Linux at
work. The X server can get his
Is there an app which helps configure your printer for you? I can't
remember what its called. Please 'CC' me on a reply.
Thanks.
John Pearson wrote:
You shouldn't need to.
If you have php3 (not php3-cgi) installed:
- Install php3-mysql;
- Ensure that the line
extension=mysql.so
appears in /etc/php3/apache/php3.ini
- Stop re-start apache.
If you're using php3-cgi:
- Install php3-cgi-mysql;
-
Andrew McRobert wrote:
hi
...pls excuse the dumb-ness of this qstn, but how do I tell if I'm running
php3-apache OR php3-cgi? does the former run automatically when apache runs?
(provided there's a valid php3.ini file). If so, then how does php3-cgi run?
php3-cgi runs like any other cgi
On Thu, Jun 01, 2000 at 07:54:36PM +0100, Daniel Burrows wrote:
Is there an app which helps configure your printer for you? I can't
remember what its called. Please 'CC' me on a reply.
magicfilter might be the one you are looking for. ghostscript
is another one you should download and
On Thu, 1 Jun 2000, maxine wrote:
Hi -Posted yesterday morning with a problem I was having with NFS-common
at boot. The problem was:
starting NFS common: statd lockd rpc.statd forgot to set AF_INET in udp
sendmsg. FIX IT!
Just to see I decided to remove the NFS COmmon package. I did this
hello everyone,
i wonder if anyone might be able to help me or if anyone has had a
similar problem. Since upgrading to potato i've been unable to get
sound to work. I know looking in the archives that this sort of
problem seems to occur regularly but i haven't yet found a solution.
i've got a
On 06/02, da Bobstopper wrote:
does anyone know of a free software equivalent of partition magic?
GNU parted does this (according to its man page). I haven't tried
it though.
what i'm figuring is that if we want to push free software, we've got to make
it more accessible. a lot of
On Thu, 1 Jun 2000, Ron Rademaker wrote:
Your upgrade gives you some trouble, I've had it too, the way I fixed it
is not a real nice way but it worked. I did the following:
Went to the directory where apt downloaded to, used dpkg several times
with all kind of --force options, after lots of
On Thu, Jun 01, 2000 at 12:02:47PM -0600, Art Lemasters wrote:
On Thu, Jun 01, 2000 at 07:54:36PM +0100, Daniel Burrows wrote:
Is there an app which helps configure your printer for you? I can't
remember what its called. Please 'CC' me on a reply.
magicfilter might be the one you
da Bobstopper wrote:
does anyone know of a free software equivalent of partition magic?
try FIPS at http://www.tucows.com
search for FIPS
Realize there is risk in what you are doing, make sure you perform a full
backup first. Even partition-magic trashes
partitions from time to time-
What to people use to make big posters? (Assemblage of various
PostScript figures and typeset text, collected in a huge
PostScript file ready to send to a large printer).
Thanks.
--
Peter Galbraith, research scientist [EMAIL PROTECTED]
Maurice Lamontagne Institute, Department of
hi,
The /bin/echo I used to use in Solaris understand \n and \t stuffs
by default. Is there any trick I can play so that I don't need to
specify the -e parameter for echo?
The reason I'm asking is that debian is the only un*x I've used that
/bin/echo don't interprate
da Bobstopper wrote:
does anyone know of a free software equivalent of partition magic? including
the ability to alter the size and features of existing
partitions?
I have used GNU Parted successfully to do this under Linux. I
don't know whether it works under windows (I presume so; you'd
Perhaps making an alias for echo to echo -e will work.
Ron Rademaker
On Thu, 1 Jun 2000 [EMAIL PROTECTED] wrote:
hi,
The /bin/echo I used to use in Solaris understand \n and \t stuffs
by default. Is there any trick I can play so that I don't need to
specify the -e
Hi,
I just upgraded my Potato system to the latest development kernel (2.4.0-test1),
but I can no longer connect to my ISP.
I tried upgrading pppd to the latest version (2.04b2 I believe), but
I'm still getting the same results. My computer dials in to the ISP,
but then disconnects immediatly
Tried it less than a week ago on both EXT2 and a Vfat partition, worked
nicely, although I will stress on backups as well.
Peter
Cory T. Echols wrote:
On 06/02, da Bobstopper wrote:
does anyone know of a free software equivalent of partition magic?
GNU parted does this (according to
Didi Damian [EMAIL PROTECTED] writes:
I followed their instructions and got GL working. i've only tested it
with xscreensaver-gl. It works but the screen flickers pretty bad in
OpenGL screensavers. I'm quite interested to see what results you
achieve.
Many (all?) of the opengl demo programs
Ok may be I should wait for the release of potato but
I am trying to install helix-gnome for slink and I tried to compile
it myself. I started from gnome-libs and it worked pretty well
for the most of the compilation but whem it reached the installation
part.. first it had some problem with
hello list:
i recently updated my kernel becuase i wanted to ip
masq. and felt that if i needed to compile, might as well compile for a reason,
to upgrade too! 2.2.15 w/ 2.1 debian
anyways i have ipchains set up, my policies are as
follows
ipchains -A forward -s 192.168.1.0/24 -j
MASQ
i
Randy Edwards [EMAIL PROTECTED] writes:
I'm having a problem with NFS. My basic NFS is working; so I can mount
the shares remotely. The problem is that I cannot see submounted
partitions from across the network.
For example, on the server I have /home/ftp/pub as one partition. Then
1 - 100 of 121 matches
Mail list logo
