Bonjour,
Regarde ce fil de la liste, c'est peut être cpufreq ?
http://www.mail-archive.com/debian-user-french@lists.debian.org/msg155170.html
Guy
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec
Il suffit d'installer le paquet ntfs-config et de lancer
Système/Administration/Outil de configuration NTFS
et d'activer l'écriture pour les périphériques externes
Guy
Jean-Yves F. Barbier a écrit :
Guy Roussin a écrit :
Bonsoir,
Par défaut, lorsque je branche un disque ntfs (absent de
Voici donc ce qui faut faire pour avoir un serveur pulseaudio
fonctionnel rapidement.
Après avoir installé pulseaudio, il faut éditer le fichier
/etc/default/pulseaudio pour activer le lancement du daemon au démarrage
du système.
Ensuite il faut éditer le fichier de configuration de pulseaudio
Bonjour la liste !
Après une brève recherche, je me tourne vers vous pour résoudre ce problème
simple mais au dessus de mon faible niveau.
J'ai de vieux mails stockés dans des fichiers textes. Ils sont recopiés les
uns à la suite des autres et séparés par une ligne comme ça :
Salut,
Je suis en train de propager une install d'un Mac PPC sur d'autres Mac PPC, en
utilisant un PPC source et les autres comme des disques durs externes
(FireWire).
Je fais ça avec dd. Ca semble très lent (2.7Mb/s en moyenne).
Est-ce normal ?
Y a-t-il une option à passer ou un truc à faire
Le mercredi 27 janvier 2010 à 07:38:09, christophe a écrit :
Bonjour la liste !
//
J'ai essayé de les importer avec mon mailer (kmail/kontact) mais sans succés :
il ne reconnaît que le premier et les autres sont dans le corps de texte du
premier email.
J'ai en vain chercher un outil de
Je ne sais pa si tu as déjà trouvé ton bonheur. Mais tu peux toujours essayer
d'aller voir du côté des distribution dérivées comme Sidux ou Ubuntu. Je me
rappel avoir utilisé un kernel en RC qui était packagé par Ubuntu.
On Friday 22 January 2010 09:36:45 deb...@bercot.org wrote:
On Fri, 22
David Prévot a écrit :
[...]
À ta place, je commencerais par vérifier l'intégrité de la RAM (avec
memtest86+ par exemple, et si il ne trouve pas d'erreur, recommencer le
test après avoir inversé les barrettes).
Ah oui, exact... J'avais pas fait parce que mon DD système ne voulait
pas
Guy Roussin a écrit :
Bonjour,
Regarde ce fil de la liste, c'est peut être cpufreq ?
http://www.mail-archive.com/debian-user-french@lists.debian.org/msg155170.html
Oui, ça ressemble à mon problème : je n'ai pas cpufred mais j'ai viré
cpufrequtils et tout ce qui touche à l'ACPI : on verra
On Wed, Jan 27, 2010 at 08:05:20PM +0100, tyran...@free.fr wrote:
Je fais ça avec dd. Ca semble très lent (2.7Mb/s en moyenne).
Est-ce normal ?
En terme de débit, on ne peut pas aller plus vite que dd
(mais voir plus loin). Par contre, 2.7Mb/s, c'est un signe
presque certain que le DMA n'est
tyran...@free.fr a écrit :
Salut,
Je suis en train de propager une install d'un Mac PPC sur d'autres Mac PPC,
en
utilisant un PPC source et les autres comme des disques durs externes
(FireWire).
Je fais ça avec dd. Ca semble très lent (2.7Mb/s en moyenne).
Est-ce normal ?
nan,
Le Wed, 27 Jan 2010 17:51:39 +0100,
Thierry Leurent thierry.leur...@asgardian.be a écrit :
Je ne sais pa si tu as déjà trouvé ton bonheur. Mais tu peux toujours
essayer d'aller voir du côté des distribution dérivées comme Sidux ou
Ubuntu. Je me rappel avoir utilisé un kernel en RC qui était
Selon Yves Rutschle debian.anti-s...@rutschle.net:
On Wed, Jan 27, 2010 at 08:05:20PM +0100, tyran...@free.fr wrote:
Je fais ça avec dd. Ca semble très lent (2.7Mb/s en moyenne).
Est-ce normal ?
En terme de débit, on ne peut pas aller plus vite que dd
(mais voir plus loin). Par contre,
Bonjour,
Il y a fort longtemps que je n'ai écris de document en
latex. Entre-temps, tetex a fait place à livetex dans debian et j'ai un
peu perdu mes repères.
En l'occurence, je rencontre une erreur dès la seconde ligne de mon
document. J'avais en effet l'habitude d'utiliser \usepackage{french},
David Soulayrol wrote:
Bonjour,
Il y a fort longtemps que je n'ai écris de document en
latex. Entre-temps, tetex a fait place à livetex dans debian et j'ai un
peu perdu mes repères.
En l'occurence, je rencontre une erreur dès la seconde ligne de mon
document. J'avais en effet l'habitude
Et avec rsync ? :
rsync -auvz source destination
Je fais ça avec dd. Ca semble très lent (2.7Mb/s en moyenne).
Est-ce normal ?
En terme de débit, on ne peut pas aller plus vite que dd
(mais voir plus loin). Par contre, 2.7Mb/s, c'est un signe
presque certain que le DMA n'est pas
Le mercredi 27 janvier 2010, Basile STARYNKEVITCH a écrit :
Oui, je crois que l'auteur (B. de? Gaulle) de french.sty
Il s'agit de Bernard Gaulle, sans le de :-)
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un
Le Wednesday 27 January 2010 21:10:00 Jeremie COURREGES-ANGLAS, vous avez
écrit :
Le mercredi 27 janvier 2010 à 07:38:09, christophe a écrit :
[...]
#!/bin/bash
[ $# -eq 0 ] printf Usage : $0 fichier [ autrefichier... ]\n 2
exit 1
for file_base in $@; do
while read -r line; do
Bonsoir,
j'ai des serveurs sur Internet et voudrais faire un backup sur l'espace
ftp mis a ma disposition par les hebergeurs. L'un d'entre vous aurait
connaissance d'un logiciel qui gere _en natif_ le backup d'une machine
distante (complete ou partielle) sur du ftp?
--
Daniel
--
Lisez la
Le jeudi 28 janvier 2010 à 12:01:53, christophe a écrit :
Le Wednesday 27 January 2010 21:10:00 Jeremie COURREGES-ANGLAS, vous avez
écrit :
Le mercredi 27 janvier 2010 à 07:38:09, christophe a écrit :
[...]
#!/bin/bash
[ $# -eq 0 ] printf Usage : $0 fichier [ autrefichier... ]\n 2 exit
Le 28 janvier 2010 00:25, Daniel Huhardeaux no-s...@tootai.net a écrit :
Bonsoir,
j'ai des serveurs sur Internet et voudrais faire un backup sur l'espace ftp
mis a ma disposition par les hebergeurs. L'un d'entre vous aurait
connaissance d'un logiciel qui gere _en natif_ le backup d'une
Le mercredi 27 janvier 2010 23:36:31, David Soulayrol a écrit :
Bonjour,
Il y a fort longtemps que je n'ai écris de document en
latex. Entre-temps, tetex a fait place à livetex dans debian et j'ai un
peu perdu mes repères.
En l'occurence, je rencontre une erreur dès la seconde ligne de
bonjour,
je recherche un moyen de corriger les erreurs au boot sur
un média alternatif (carte CF II ) et voici les codes erreurs :
ide_dma_sff_timer_expiry: DMA status (0x21)
dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
attention ces erreurs sont consécutives dans
Le mercredi 27 janvier de l'année 2010, vers 19 heures et 38 minutes,
christophe écrivait:
Bonjour la liste !
Bonjour :)
Après une brève recherche, je me tourne vers vous pour résoudre ce problème
simple mais au dessus de mon faible niveau.
J'ai de vieux mails stockés dans des fichiers
W dniu 2010-01-27 04:29, TENEG - Tomasz Gołębiewski pisze:
No to skoro już przy tym jesteśmy mi z kolei bez przerwy znika ikona
nework-managera :(
sieć niby znajduje, ale jak chciałbym wejść w ustawienia połączeń to
raz jest ta ikona, raz jej nie ma.. (przy uruchomieniu systemu)
service
Dnia 2010-01-27, o godz. 04:29:36
TENEG - Tomasz Gołębiewski tomasz.golebiew...@teneg.com.pl napisał(a):
No to skoro już przy tym jesteśmy mi z kolei bez przerwy znika ikona
nework-managera :(
sieć niby znajduje, ale jak chciałbym wejść w ustawienia połączeń to
raz jest ta ikona, raz jej nie
bueno tengo conexion a internet no muy buena (64 K) pero si les sirve de algo
pudo bajarles cosas (documentos doc, pdf,jpg) y si saben la direccion de la
pagina que tiene lo que buscan mejor y me parece que no seria mal hacer un
grupo donde uno se pudiera reunir y haer las diferentes consultas
Hola,
Estoy configurando el logrotate para que incluya una rutina de rotación
de los registros de fetchmail que ya ocupan unos ~8 MiB en un archivo
único.
Ayer creé un archivo de configuración bajo /etc/logrotate.d/fetchmail con
el siguiente contenido:
***
stt005:/etc/logrotate.d# cat
Buenos días
Estoy intentando leer una cuenta de correo ( interno de la empresa,
montado en un windows) y que guarde los mensajes en un fichero como
texto plano. Esto es para luego crear un script y realizar un envió por
sms ( ya tengo el enlace gsm funcionando).
He probado diferentes
On Wednesday 27 January 2010 13:38:55 Camaleón wrote:
Hola,
¿Me falta alguna cosa por hacer o configurar?
¿Has probado a ejecutarlo a mano con debug para ver qué te sale?
Un saludo.
--
Antonio Arriaga
--
To
ocurrido forzar
su ejecución, de forma manual:
stt005:/var/log# /etc/cron.daily/logrotate
stt005:/var/log# ls -l fetch*
-rw-r--r-- 1 fetchmail root 0 ene 27 14:49 fetchmail.log
-rw-r--r-- 1 fetchmail root 517587 ene 27 14:49 fetchmail.log-20100127.gz
Ya está, se ve que aún no le tocaba
El Wed, 27 Jan 2010 13:45:12 +0100, jmramirez escribió:
Estoy intentando leer una cuenta de correo ( interno de la empresa,
montado en un windows) y que guarde los mensajes en un fichero como
texto plano. Esto es para luego crear un script y realizar un envió por
sms ( ya tengo el enlace
On Wed, Jan 27, 2010 at 01:45:12PM +0100, jmramirez wrote:
Buenos días
Estoy intentando leer una cuenta de correo ( interno de la
empresa, montado en un windows) y que guarde los mensajes en un
fichero como texto plano. Esto es para luego crear un script y
realizar un envió por sms ( ya
2010/1/27 jmramirez mas_ke...@hotmail.com:
Buenos días
Estoy intentando leer una cuenta de correo ( interno de la empresa,
montado en un windows) y que guarde los mensajes en un fichero como texto
plano. Esto es para luego crear un script y realizar un envió por sms ( ya
tengo el enlace
Mensaje original
Asunto: Re: Lectura de correo desde consola y guardarlo en archivo texto
plano
De: Pedro Insua pedroin...@gmail.com
Para: debian-user-spanish@lists.debian.org
Fecha: 27/01/10 15:44
On Wed, Jan 27, 2010 at 01:45:12PM +0100, jmramirez wrote:
Buenos días
Sólo el Compartir salvará el mundo
En medio de la guerra, el temor y la hambruna, existe una nueva esperanza en
el mundo para todos nosotros
Los hombres de todas partes están al fin preparados para una nueva
interpretación del significado y propósito de la vida, para el compartir, la
Saludos Listeros
Hoy al intentar bajar el VirtualBox ppaaaff Forbidden, estos malditos
cabrones denegaron la descarga para cuba, o al menos para mi ip
Alguien que pueda acceder que me lo pueda bajar, que lo tenga y subirmelo
a http://www.mediafire.com/ se los voy a agrader un mundo
aqui el
Hola
Se ha iniciado mi pc y al cargar el Grub me pone
Grub loading error 17
Como puedo recuperar esto ya que tengo informacion importante y reinstalar
significaría perder la informacion uso debian lenny
Qué puedo hacer para solucionar esto
--
To UNSUBSCRIBE, email to
El Wed, 27 Jan 2010 10:24:57 -0500
cosme co...@gecgr.co.cu escribió:
Encontré esto:
http://pcobsesion.wordpress.com/2008/05/22/recuperar-grub-error-17/
Veo que estás en Cuba, así que por las dudas que no puedas entrar, te pego lo
que dice ahí:
A continuación se explica, en unos sencillos pasos,
Hola lista,
estoy intentando montar un cluster con mysql aprovechando las
funcionalidades de mysql-ndb. Me interesa especialmente para
rendimiento y garantía de datos. La configuración es la siguiente: 4
nodos de datos y un nodo de NDB_MGMD. La configuración del MGDB es tal
que así:
[NDBD
On 27/01/10 10:54, cosme wrote:
Hola
Se ha iniciado mi pc y al cargar el Grub me pone
Grub loading error 17
Como puedo recuperar esto ya que tengo informacion importante y
reinstalar significaría perder la informacion uso debian lenny
Qué puedo hacer para solucionar esto
Aquí
On 27/01/10 11:24, Yuniesky Machado wrote:
Gracias colega
Si quieres me lo mandas al privado, o no, mejor a la lista para que todo
el interesado lo coja
Saludos
On 27/01/10 11:01, Yuniesky Machado wrote:
Saludos Listeros
Hoy al intentar bajar el VirtualBox ppaaaff
Gracias a la ayuda de todos, ya tengo en link y ya lo estoy fusilando.
Saludos
On 27/01/10 11:24, Yuniesky Machado wrote:
Gracias colega
Si quieres me lo mandas al privado, o no, mejor a la lista para que
todo
el interesado lo coja
Saludos
On 27/01/10 11:01, Yuniesky
Mensaje original
Asunto: Re: Lectura de correo desde consola y guardarlo en archivo
texto plano
De: deb...@mstaaravin.com.ar deb...@mstaaravin.com.ar
Para: jmramirez mas_ke...@hotmail.com
Fecha: 27/01/10 17:41
Flaco la lista existe para algo, ahora por ser tan pelotudo de
2010/1/27 jmramirez mas_ke...@hotmail.com:
Gracias a los dos, probé con el mutt. Voy a probar con fetchmail,
siempre que lo veía pensaba que era un servidor entero de correo ( como exim
o sendmail). Pero la definición de la wikipedia me lo ha dicho to
fetchmail es una aplicación
El día 27 de enero de 2010 07:24, cosme co...@gecgr.co.cu escribió:
Hola
Se ha iniciado mi pc y al cargar el Grub me pone
Grub loading error 17
Como puedo recuperar esto ya que tengo informacion importante y reinstalar
significaría perder la informacion uso debian lenny
Qué puedo hacer
Negocioserio:
¡Ven y únete en Negocioserio!
javier fernandez aliaga
Haz clic en el siguiente vínculo para unirte:
http://negocioserio.ning.com/?xgi=0hX0ivFlL9euGwxg_source=msg_invite_net
If your email program doesn't recognize the web address above as an active link,
Saludos!!
Existen herramientas, varias, para el monitoreo de red, pero alguien podria
recomendarme o decir que usa para la monitorizacion de usarios o registro de
actividades de usuarios en la red.
Gracias
--
Germana Oliveira
germanaoliveirab arroba gmail punto com
http://626f67.wordpress.com
Buenas.
Ayer (martes) realice una actualización de Debian Sid sin ningun
problema... Entonces hoy cuando he ido a iniciar el sistema, después
de salir el menu de selección GRUB2 (solamente tengo las opciones de
Inicio standar e inicio recovery) me muestra el mensaje:
* Botting Debian GNU/Linux
El mié, 27-01-2010 a las 21:23 +0100, Victor Santos escribió:
Buenas.
Ayer (martes) realice una actualización de Debian Sid sin ningun
problema... Entonces hoy cuando he ido a iniciar el sistema, después
de salir el menu de selección GRUB2 (solamente tengo las opciones de
Inicio standar e
El mié, 27-01-2010 a las 15:59 -0400, Germana Oliveira escribió:
Saludos!!
Existen herramientas, varias, para el monitoreo de red, pero alguien
podria recomendarme o decir que usa para la monitorizacion de usarios
o registro de actividades de usuarios en la red.
acct
Gracias
de nada
En sintesis:
Se presentan 2 situaciones a resolver por los interesados:
1. Algunos usuarios de Debian en Cuba, no tienen coneccion a Internet?
a decir verdad, la gran mayoria no la tiene o muy limitada,
principalmente por razones de orden economico y desinteres de nuestros
directivos
Bra fråga!
/Janne
On Tue, 26 Jan 2010 21:27:10 +0100
mattias m...@mjw.se wrote:
Fattar någon denna detalj
lshw -C memory
*-firmware
description: BIOS
vendor: Dell Computer Corporation
physical id: 0
version: A07 (09/27/2004)
size: 64KiB
capacity: 448KiB
capabilities: pci pnp apm
On Tue, 26 Jan 2010, mattias wrote:
Fattar någon denna detalj
efter konversation offlist dårå.
Det som söks är hur mycket ram maskinen har. Jag har inte lusläst
utskriften nedan men jag har aldrig använt lshw heller så det kanske finns
någon annan som är bättre lämpad.
brukar använda
Den har två gigabyte RAM. 4 x 512MiB i bank0 t o m bank3.
On Wed, Jan 27, 2010 at 10:14, Martin Bagge / brother mar...@bagge.nu wrote:
On Tue, 26 Jan 2010, mattias wrote:
Fattar någon denna detalj
efter konversation offlist dårå.
Det som söks är hur mycket ram maskinen har. Jag har inte
2gb har maskinen.
4 stycken 512mb minnen.
/Jens
-Ursprungligt meddelande-
Från: Martin Bagge / brother [mailto:mar...@bagge.nu]
Skickat: den 27 januari 2010 10:14
Till: mattias
Kopia: debian-user-swedish@lists.debian.org
Ämne: Re: ram
On Tue, 26 Jan 2010, mattias wrote:
Fattar
2010/1/26 Márcio Pedroso escreveu:
cara para reinstalar o grub vc deve usar um live-cd, fazer um chroot e dar
um update-grub ou um grub-install ou algo do genero, use o live tambem para
verificar os parametros do grub e ver se todos estao certos, verificar se
esta usando o grub ou o grub2.. ha
2010/1/27 China escreveu:
Volte para a versão antiga do Grub. A versão 2 não deu certo em
nenhuma de minhas máquinas. A solução que tive foi de voltar para a
ultima versão e pinar para que não seja atualizado da proxima vez,
pelo menos até que eu possa saber o que está acontecendo ou os
Olá galera!
Por favor me confirmem se estou correto no caso da mbr for sobrescrita
quando da instalação de um win numa partição livre de uma maquina com
linux.
Se eu rodar um live cd, tipo Kurumin eu terei acesso aos diretórios do
linux que já estava instalado, certo?
aí então eu posso
Além de editar o menu.lst, faça um chroot na partição Linux e execute o
grub-install.
--
[]s
Erick
2010/1/27 ju...@itajuba.mg.gov.br
Olá galera!
Por favor me confirmem se estou correto no caso da mbr for sobrescrita
quando da instalação de um win numa partição livre de uma maquina com
Isso não tem a ver com limite de cilindros ou algo do tipo?
--
[]s
Erick
2010/1/27 Bruno Schneider boschnei...@gmail.com
2010/1/27 China escreveu:
Volte para a versão antiga do Grub. A versão 2 não deu certo em
nenhuma de minhas máquinas. A solução que tive foi de voltar para a
ultima
2010/1/27 Erick Andrade escreveu:
Isso não tem a ver com limite de cilindros ou algo do tipo?
Creio que não. Por que teria?
Algo muito estranho aconteceu: tentei reverter o grub para a versão
antiga instalando o grub-legacy, mas não consegui criar a configuração
correta para bootar com LVM (o
Júlio tenta isto.
- Primeiro marcar a partição do Linux como ativa. Use o Gparted
- Montar a partição Linux(/mnt/)
- Montar a partição dev (mount -o bind /dev /mnt/dev)
- chroot /mnt/
- grub-install /dev/xxx
2010/1/27 ju...@itajuba.mg.gov.br
Olá galera!
Por favor me confirmem se estou correto
2010/1/27 Bruno Schneider escreveu:
Então mandei instalar o Squeeze de novo, dessa vez sem a parte gráfica
(desktop computer ou qualquer coisa assim) no tasksel.
Entendi agora. A primeira instalação foi do grub-pc 1.98~20100115-1
disponível hoje nos repositórios testing. A segunda foi do grub
Olá a todos...
Apesar de ser com o ubuntu eu acho mais simples a sugestão abaixo:
Entrar com o Live CD do Ubuntu e digitar no terminal:
#grub
#find /boot/grub/stage1
#root (hd?,?)
(onde ?,? é o que aparece no 2 - (hd0,1) por exemplo)
#setup (hd0)
#quit
obs: os comandos com # são como root
faz o que diz esse tutorial, é o que eu sempre uso e nao tem falha..
http://www.vivaolinux.com.br/dica/Fazendo-backup-do-Grub-e-restaurando-em-dois-comandos
basicamente ele faz uma copia da mbr original e depois é so restaurar
Em 27 de janeiro de 2010 17:03, Pjota pjotam...@gmail.com escreveu:
Tentei a seguinte sugestão, da última resposta que recebi, porem sem resposta:
Faça assim:
mv /etc/X11/xorg.conf /etc/X11/xorg.conf.old-`date +%Y%m%d`
touch /etc/X11/xorg.conf
e tente novamente.
On Wed, Jan 27, 2010 at 8:12 AM, vishnu vardhan
vishnuvardhan.li...@gmail.com wrote:
OS : Lenny 5.0.3
I have installed openoffice from backports and transmission-gtk from
unstable.
I have read a couple of articles about installing packages from stable,
unstable, etc.. and pinning of
On Tue, Jan 26, 2010 at 11:59:26PM -0800, evenso wrote:
I should clarify:
I made sure to set it not to make changes automatically. But it never asked
to uninstall a backports package. (In the ncurses TUI under preferences.)
Meaning the ncurses Text User Interface of aptitude.
If you
Hello,
I've setup a Debian Lenny server with a chroot environment and some users have
a scponlyc shell. There's a Cisco Linksys router to access to internet
forwarding port 22.
The problem is that users have to do several attemps to connect to the server,
after 6 or more attemps to connect
On Wed, Jan 27, 2010 at 07:15:19AM +0100, Vadkan Jozsef wrote:
sorry:D
i wanted to write: it's not working. :\
what happens when you type ulimit -a
plus you need
# Sets up user limits according to /etc/security/limits.conf
# (Replaces the use of /etc/limits in old login)
session
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Apologies if the first message wasn't clear enough:
df -h
FilesystemSize Used Avail Use% Mounted on
/dev/hda1 56G 55G 0 100% /
tmpfs 237M 0 237M 0% /lib/init/rw
udev 10M 696K
El Wednesday 27 January 2010 09:45:55 Tim Beauregard va escriure:
Apologies if the first message wasn't clear enough:
df -h
FilesystemSize Used Avail Use% Mounted on
/dev/hda1 56G 55G 0 100% /
tmpfs 237M 0 237M 0% /lib/init/rw
udev
The dvips utility of squeeze is now (texlive 2009) contained in package
texlive-binaries.
--
Regards,
Jörg-Volker.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
I'm experiencing strange system hangs after squeeze was upgraded from
2.6.30-2 to 2.6.32.
That happens on two systems, where one is 686 and the other is amd64.
Anybody else with overall strange behaviour with the new kernel?
So, I reinstalled the 2.6.30-2 kernel which prematurely I admit, I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Marc Olive wrote:
Maybe you copied /document files to /documents without being hdb1 monuted?
Try to umount /documents and see if there are still all files.
t...@server:~$ umount /documents
t...@server:~$ ls -l /documents/
total 0
As expected?
On 2010-01-26, Boyd Stephen Smith Jr. b...@iguanasuicide.net wrote:
--nextPart7215540.ksqcIOTIpo
Content-Type: Text/Plain;
charset=iso-8859-15
Content-Transfer-Encoding: quoted-printable
On Tuesday 26 January 2010 06:39:24 Jeffrey Cao wrote:
Now, I get why the elinks package is scheduled
When I upgraded to 2.6.32-trunk kernel in debian testing, I got a problem with
tty on startup.
After power on, it jumpts to tty4 or tty5(one time to tty4, and another time
to tty5) before printing the following message:
INIT: Entering runlevel 2
Why does it jumpt to tty4/tty5 rather than just stay
El Wednesday 27 January 2010 12:20:28 Tim Beauregard va escriure:
Marc Olive wrote:
Maybe you copied /document files to /documents without being hdb1
monuted? Try to umount /documents and see if there are still all files.
t...@server:~$ umount /documents
t...@server:~$ ls -l /documents/
Dear debian people,
I need to configure a application/database server to proof the potential of
open source business intelligence. I want to use a ETL tool like the java based
Talend or Pentaho Kettle or maybe the unix tools awk, sed, perl to transform 25
million records into 10 million
What is the result of
umount /documents
umount /maxtor
du -x --max-depth=1 / | sort -n
?
(Don't forget to remount /dev/hdb1 and /dev/sda1 ;-)
--
Regards,
Jörg-Volker.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
Hi,
On Tue, Jan 26, 2010 at 07:39:09PM -0500, Celejar wrote:
On Fri, 15 Jan 2010 16:18:31 -0500
Chris Jones cjns1...@gmail.com wrote:
On Fri, Jan 15, 2010 at 09:29:04AM EST, Celejar wrote:
On Fri, 15 Jan 2010 03:56:11 -0500
Chris Jones cjns1...@gmail.com wrote:
[..]
bash info still
Hi,
On Wed, Jan 27, 2010 at 09:42:42AM +0530, vishnu vardhan wrote:
OS : Lenny 5.0.3
I have installed openoffice from backports
Good move.
and transmission-gtk from unstable.
??? I think this is questionable move which is risky for package with
library dependence.
Do I need to create a
On Wed, 27 Jan 2010 22:05:02 +0900
Osamu Aoki os...@debian.org wrote:
Hi,
On Tue, Jan 26, 2010 at 07:39:09PM -0500, Celejar wrote:
On Fri, 15 Jan 2010 16:18:31 -0500
Chris Jones cjns1...@gmail.com wrote:
On Fri, Jan 15, 2010 at 09:29:04AM EST, Celejar wrote:
On Fri, 15 Jan 2010
Jeffrey Cao wrote:
When I upgraded to 2.6.32-trunk kernel in debian testing, I got a problem with
tty on startup.
After power on, it jumpts to tty4 or tty5(one time to tty4, and another time
to tty5) before printing the following message:
INIT: Entering runlevel 2
Why does it jumpt to tty4/tty5
Hi there,
I've got an annoying problem with my laptop which is a Pavilion dv5. I
have the latest kernel 2.6.32.
The problem is that at reboot the speakers make a loud noise which I
fear may damage hardware. This problem existed with somewhat older
kernels and it was worse. There used to
On Wed, 27 Jan 2010 08:53:18 -0500, Celejar wrote:
What I meant was that I see no definitive answer to the general
semantic question of whether stuff in the non-free section is 'in
Debian' or not.
Excuse me for butting in here, gentlemen, but perhaps these links
will help clarify things:
In hjp7pj$k1...@ger.gmane.org, Jeffrey Cao wrote:
On 2010-01-26, Boyd Stephen Smith Jr. b...@iguanasuicide.net wrote:
On Tuesday 26 January 2010 06:39:24 Jeffrey Cao wrote:
Now, I get why the elinks package is scheduled to be removed. The
dependency must be wrong for elinks-data package as
On Thu, 21 Jan 2010 17:20:49 +0530
Kousik Maiti kousiks...@gmail.com wrote:
You need cross connected cable to connect 2 pc via lan card .
http://en.wikipedia.org/wiki/Ethernet_crossover_cable
IIUC, many (most?) ethernet cards today support auto-crossover, which
means that you can use a
In 20100127131300.ge6...@osamu.debian.net, Osamu Aoki wrote:
Do I need to create a prefernce file ?...
These are tricks to fool APT.
Not fool. Apt, by default, treats all remote repositories in one of two
manners get every package from there (priority 500) or get only the
packages I request
I've tried a lot of grub-pc, grub-install, grub-probe and finally upgraded
to 2.0.36... After all it worked Thanks
Atenciosamente,
Leonardo Ruoso (CE1921JP)
leona...@oktiva.com.br - (85) 8787-0312
Marketing, Comunicação Social e Tecnologia
Sent from Fortaleza, CE, Brasil
2010/1/26
On Wed, Jan 27, 2010 at 8:27 AM, Leonardo Ruoso
leonardo.ru...@gmail.comwrote:
I've tried a lot of grub-pc, grub-install, grub-probe and finally upgraded
to 2.0.36... After all it worked Thanks
It's a lot more work and headache than editing menu.lst, ain't it? :(
On Wed, 27 Jan 2010 11:27:12 -0500, Leonardo Ruoso wrote:
I've tried a lot of grub-pc, grub-install, grub-probe and finally upgraded
to 2.0.36... After all it worked Thanks
I'm glad you finally got it working! I have nothing personal against any
grub2 developers who may listening, but I'm
After installing Openoffice, I commented out lines of backports.
When I have installed transmission, I did not commented out lines of
backports.
Normally, I install the packages with the following command :
aptitude install package.
Freeman | there is no apt.conf file at /etc/apt/.
However the
I wouldn't dismiss what Marc was onto. If you do the math, 44G in /documents +
11G in the rest of / == 55G, seems to be a bit more than coincidence. I know
you already tried ls -l /documents/ after you umounted but just for curiosity's
sake, I wonder what happens when you do:
umount /documents
Recently I've got a problem on a server... after editing menu.lst the
machine boots, but running an apt-get upgrade that got a new kernel image, i
lost all my edition... '/' was at /dev/sda2, but the upgrade changed it to
/dev/sda1, which is the swap partition. Upgrading to grub2 correct this
-Original Message-
From: Stan Hoeppner [mailto:s...@hardwarefreak.com]
Sent: Tuesday, 26 January, 2010 20:22
To: debian-user
Cc: James Zuelow
Subject: Re: Rsyslog template
You might try just commenting out the original you have, and
entering something
like:
Hello,
I'm not sure I'm at the right place (please, if not, tell me where I can
find a solution...) but I have a problem with multimedia hardware.
So, I've changed my graphic card and I've bought an ATI Radeon HD 4550.
My goal is to use only an HDMI cable between my computer and my AV
amplifier.
Hi dear all ,
Last week i had installed plesk control panel on my debian lenny
server. All services work fine except bind.
I don't know why but when i create a domain,automatically plesk
creates necessary records for dns (in /etc/named.conf that is symbolic
link to /var/named/.../etc/named.conf )
On Wed, Jan 27, 2010 at 7:59 AM, Nima Azarbayjany
i.adore.deb...@gmail.comwrote:
Hi there,
I've got an annoying problem with my laptop which is a Pavilion dv5. I
have the latest kernel 2.6.32.
The problem is that at reboot the speakers make a loud noise which I fear
may damage hardware.
1 - 100 of 134 matches
Mail list logo