[OFF TOPIC] Fallo de hardware
Tengo un problema con las KDE, y es que siempre me da el mismo error de signal 11, y me han comentado que error de hardware. Como he usado GNOME no lo he tenido en cuenta hasta ahora, pero en este tiempo caluroso mi PC cada vez que arranca se me va a la bios marcandome algunas opciones en rojo..., en invierno arranca sin problemas, el caso es que yo ignoro esos fallos y sigo con el arranque..., pero ahora pienso si no sera por este motivo por el que las KDE no me funcionan, o mejor dicho me dan ese error... Aqui pongo la referencia de las opciones que me marca en rojo por si alguien ha tenido o sabe como solucionar MENU CPU Internal Frequency 550 Mhz During the las boot-up yours system hung for an improper CPU Internal Frequency setting. Your system is now working in safe mode. To optimize the systen poerformance and reliability, make sure the CPU speed conforms to the specifications of your CPU. CPU Vcore 2.00 v. Default setting ir recomended. The higher your set the CPU Vcore voltage to, the more likely you will cause damege to yours CPU. SDRAM Frequency (Mz) 75 If CPU frequency setting out of specification or SDRAM frequency setting above 100 Mhz exceed the specification of the onboard Intel Chipset are not guarenteed to be stable. En fin, perdonen por este off topic (pero estoy desesperao).. gracias..
Consulta
Ya hace un tiempo que quiero armarme otra maquina y dejar la que tengo funcionando como server con salida a internet, y me quedarian dos maquinas, una con windows y otra windows/linux. La pregunta es la siguiente e visto en la lista unos mensajes de maquinas que no usaban ni teclado ni placa de video, es esto posible con cualquier maquina o es un tipo de maquina especial. Mi maquina es un Pentium III 450 Mhz con 256 Mb de RAM el motherboard es un Asus P3BF. La pregunta es si hay alguna forma de hacer que la maquina arranque sin teclado ni placa de video y despues como son los pasos a seguir para instalar debian (supongo que es con una placa de video y un teclado colocados de forma temporal) y despues como se hace el mantenimiento, (por telnet desde alguna de las otras maquinas). Gracias de antemano y saludos.
Re: IP_MASQUERADE
Ejecuto los pasos de configuración para el router con ipchains: ipchains -P forward -j Deny obteniendo el siguiente resultado: ipchains: -P requires a chain an a policy Sobra el -j al especificar la politica por defecto ;-) La estructura es: --policy -P chain target (mas informacion ipchains -h / man ipchains) Ejecuto: ipchains -A forward -s 192.162.0.2/10 -d 00 -j MASQ obteniendo como resultado: WARNING you must enabling IP forwarding for packets to be forwarded at all: Use 'echo 1 /proc/sys/net/ipv4/ip_forward' Pues que necesitas activar el ipforward en el kernel (viene desactivado por defecto). Tienes la respuesta en la ultima linea ;-) tecleando: echo 1 /proc/sys/net/ipv4/ip_forward Aparte de eso, creo que la sintaxis de las direcciones esta mal, que pretendes hacer, dar acceso a la IP 192.168.0.2 a cualquier otra via masquerading ? Z0MBiE / ELiTE (visit us at http://move.to/elite-hq)
Re: Consulta
La pregunta es la siguiente e visto en la lista unos mensajes de maquinas que no usaban ni teclado ni placa de video, es esto posible con cualquier maquina o es un tipo de maquina especial. Mi maquina es un Pentium III 450 Mhz con 256 Mb de RAM el motherboard es un Asus P3BF. Pues en principio si, al menos en los PCs antiguos se podia desactivar en la bios el boot check error que comprueba que este el dispositivo conectado y no continue con el arranque. Referente a como usarlo luego, pues hay muchas maneras por supuesto. Si te interesa ver algo de la maquina sin tarjeta de video, puedes volcar la salida por una consola serie (necesitas recompilar el kernel para eso). Para tareas de administracion y todo eso, puedes entrar por telnet/ssh desde otro PC y usarla sin problemas. Z0MBiE / ELiTE (visit us at http://move.to/elite-hq)
PROBLEMAS CON NETSCAPE 6.0, 6.01 6.1PR1
Hola! A ver si alguien sabe que me puede estar pasando. Tengo instlado en mi debian 2.2 la version 6.1PR1 de netscape, aunque he provado con las que digo arriba. Pues no consigo que me reconozca los plugins, ni los de serie, asi que no tengo ni siquiera java, ni falsh, ... Al poner about:plugins me dice que usa el fichero File name: /usr/local/netscape/plugins/libnullplugin.so .. Y que pasa con los demas Mi netscape esta intalado en /usr/local/netscape. Alguna idea??? Gracias por todo. Angel
Re: IP_MASQUERADE
Por defecto, el forwarding está desactivado, usease, que si la máquina recibe un paquete por una tarjeta NO lo saca por la otra. Lo que te dice es que tienes que activar el forwarding poniendolo a 1 en el fichero /proc/sys/net/ipv4/ip_forward. La verdad es que a mi tb me mosqueó. - Original Message - From: [EMAIL PROTECTED] To: debian-user-spanish@lists.debian.org Sent: Sunday, June 17, 2001 4:08 AM Subject: IP_MASQUERADE Hola de nuevo. Tengo un problema para poder compartir Internet con varias máquinas más. Ejecuto los pasos de configuración para el router con ipchains: ipchains -P forward -j Deny obteniendo el siguiente resultado: ipchains: -P requires a chain an a policy Ejecuto: ipchains -A forward -s 192.162.0.2/10 -d 00 -j MASQ obteniendo como resultado: WARNING you must enabling IP forwarding for packets to be forwarded at all: Use 'echo 1 /proc/sys/net/ipv4/ip_forward' ¿Alguien me puede explicar esto en cristiano? Gracias. __ Get your own FREE, personal Netscape Webmail account today at http://webmail.netscape.com/ -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Consulta
El teclado lo puedes desconectar en la Bios (bueno, le dices que si no lo encuentra no se pare). La tarjeta de video no lo sé. - Original Message - From: Ricardo Marcelo Alvarez [EMAIL PROTECTED] To: debian-user-spanish@lists.debian.org Sent: Sunday, June 17, 2001 12:22 PM Subject: Consulta Ya hace un tiempo que quiero armarme otra maquina y dejar la que tengo funcionando como server con salida a internet, y me quedarian dos maquinas, una con windows y otra windows/linux. La pregunta es la siguiente e visto en la lista unos mensajes de maquinas que no usaban ni teclado ni placa de video, es esto posible con cualquier maquina o es un tipo de maquina especial. Mi maquina es un Pentium III 450 Mhz con 256 Mb de RAM el motherboard es un Asus P3BF. La pregunta es si hay alguna forma de hacer que la maquina arranque sin teclado ni placa de video y despues como son los pasos a seguir para instalar debian (supongo que es con una placa de video y un teclado colocados de forma temporal) y despues como se hace el mantenimiento, (por telnet desde alguna de las otras maquinas). Gracias de antemano y saludos. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
RE: SAMBA Y W98
Para la segunda opcion aqui te adjunto un .reg de windows, que añade 'plain text' al registro, No se si se pueden enviar archivos adjuntos a la lista, aunque este es muy pequeñito 122 bytes, pero si no se puede perdon por ello. P.d.: Ah otra cosa... los que useis un lector de correo en win, para bajar este mensaje, tener a mano un antivirus actualizado,, que creo que tengo algun virus del tipo VBS (ya me lo haceis saber si es asi) - Original Message - From: Rossy Roman S. To: [EMAIL PROTECTED] Cc: debian-user-spanish@lists.debian.org Sent: Saturday, June 16, 2001 9:29 PM Subject: Re: SAMBA Y W98 Todo el problema son las passwords: las que envia Guin no las recibecorrectamente el servidor Linux. Todo el asunto es que se pongan deacuerdo y eso puede hacer de dos formas:1.- Decirle a Samba que encripte las contrasennas, esto se hace en elsmb.conf:; Passwords are encrypted by default. This way the latest Windows 95 and; NT clients can connect to the Samba server with no problems.encrypt passwords = yesLuego, tienes que crear las password a los recursos compartidos con consmbpasswd.2.- La otra opcion es modificar el registro de Guindows, (no recuerdo laclave exacta, pero puedo buscarla si es la opcion que te interesa) paraque las password se envien al samba en "plain text". Y ademas le dices alSamba que las password no son encriptadas (en la opcion anterior), y yaesta.Espero que te sirva.Rossy***"Imagination is more important than knowledge" *** Registered Linux user number 99347On Sat, 16 Jun 2001 [EMAIL PROTECTED] wrote: Hola a todos. Mi problema es el siguiente: Tengo una máquina con Linux conectada en red con 2 máquinas win98. Samba funciona bien, las máquinas responden correctamente al hacer Ping sobre cualquiera de ellas. Utilizo smbmount para acceder a los archivos compartidos de las Windows sin problema, pero cuando trato de acceder al servidor Samba desde windows, no me acepta ninguna de las contraseñas y es imposible acceder. Tengo entendido que win98 utiliza el passwd encriptado, mientras que linux lo admite en modo texto y de ahí el problema. ¿Alguien sabría darme información al respecto? Gracias. ppt98.reg Description: Binary data
RE: [OFF TOPIC] Fallo de hardware
Indica que distro tienes,, o que version de KDE usas, ya que las primeras versiones de kde, tenian algun que otro fallito,, Respecto al hardware, indique que maquina tienes... aunque por lo que veo parece ser que pierdes la cmos, puede ser por falta de pila,, con lo cual la cambias y ya esta, ya que no suelen valer mas de 700 u 800 pts. sino es la pila, lo tienes chungo, por que podria ser la P.B., (mira a ver si los ventiladores los tienes bien, o ya estan demasiado sucios y por eso en verano se calienta mogollon, resecando la P.B.) Bueno, ya especificas un poco mas a ver si hay suerte... saludos. - Original Message - From: Francisco Javier To: Lista Debian Sent: Sunday, June 17, 2001 11:05 AM Subject: [OFF TOPIC] Fallo de hardware Tengo un problema con las KDE, y es que siempre me da el mismo error de signal 11, y me han comentado que error de hardware. Como he usado GNOME no lo he tenido en cuenta hasta ahora, pero en este tiempo caluroso mi PC cada vez que arranca se me va a la bios marcandome algunas opciones en rojo..., en invierno arranca sin problemas, el caso es que yo ignoro esos fallos y sigo con el arranque..., pero ahora pienso si no sera por este motivo por el que las KDE no me funcionan, o mejor dicho me dan ese error... Aqui pongo la referencia de las opciones que me marca en rojo por si alguien ha tenido o sabe como solucionar MENU CPU Internal Frequency 550 Mhz During the las boot-up yours system hung for an improper CPU Internal Frequency setting. Your system is now working in safe mode. To optimize the systen poerformance and reliability, make sure the CPU speed conforms to the specifications of your CPU. CPU Vcore 2.00 v. Default setting ir recomended. The higher your set the CPU Vcore voltage to, the more likely you will cause damege to yours CPU. SDRAM Frequency (Mz) 75 If CPU frequency setting out of specification or SDRAM frequency setting above 100 Mhz exceed the specification of the onboard Intel Chipset are not guarenteed to be stable. En fin, perdonen por este off topic (pero estoy desesperao).. gracias.. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null Otro servicio de la asoc. informatica abierta http://www.abierta.org
RE: Consulta
Sin Tarjeta Grafica?¿ hmmm lo dudo,, sin teclado ni monitor, que creo que es lo que querias decir, si que se puede, como tu bien apuntas una vez lo tienes instalado y configurado + o - todo, entonces a traves de telnet o via Web, ya haces los ultimos cambios, pero sin tarjeta grafica dudo mucho que un PII arranque, lo mas normal es que pite... Bueno, espero haberte ayudado en algo... saludos - Original Message - From: Ricardo Marcelo Alvarez To: debian-user-spanish@lists.debian.org Sent: Sunday, June 17, 2001 12:22 PM Subject: Consulta Ya hace un tiempo que quiero armarme otra maquina y dejar la que tengo funcionando como server con salida a internet, y me quedarian dos maquinas, una con windows y otra windows/linux. La pregunta es la siguiente e visto en la lista unos mensajes de maquinas que no usaban ni teclado ni placa de video, es esto posible con cualquier maquina o es un tipo de maquina especial. Mi maquina es un Pentium III 450 Mhz con 256 Mb de RAM el motherboard es un Asus P3BF. La pregunta es si hay alguna forma de hacer que la maquina arranque sin teclado ni placa de video y despues como son los pasos a seguir para instalar debian (supongo que es con una placa de video y un teclado colocados de forma temporal) y despues como se hace el mantenimiento, (por telnet desde alguna de las otras maquinas). Gracias de antemano y saludos. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null Otro servicio de la asoc. informatica abierta http://www.abierta.org
ximian-gnome1.4 (2)
Hola... Pues eso que no consigo instalar el ximian-gnome1.4 que viene en Mundo Linux por el método que dan en la web para instalación a partir de un CD (no me digais que lo haga desde la web porque mi conexión es de 28.8 Kbps :-( y son + de 80 Mb) así que me he copiado los ficheros desde el CD al siguiente arbol de directorios que he creado /root/Ximian/dists/potato/gnome14/binary-i386 ahora intento generar el Packages para lo que hago: dpkg-scanpackages gnome14/binary-i386 overridefile/nose/queponer \ dists/potato Packages el problema es que no se que poner como overridefile Por otra parte en el CD biene un fichero packageinfo.xml.gz que me da la impresión de que es el Packages que necesito pero en formato xml, ¿alguien me puede confirmar esta impresión? si es correcta ¿como podría transformar este fichero en el fichero Packages? Muchas gracias -- ===NaClU2===IJAS _/ _/ _/_/_/ _/_/_/ Desde: 40º25'N 3º39'O _/ _/ _/ _/ _/ mailto:[EMAIL PROTECTED] _/ _/ _/ _/_/_/ _/_/_/KRIPTOPOLIS (ANTI-L$$I) _/ _/ _/ _/ _/ _/http://anas.worldonline.es/ijalonso _/ _/_/_/ _/ _/ _/_/_/http://club.telepolis.com/ijas
Re: Consulta
Ya hace un tiempo que quiero armarme otra maquina y dejar la que tengo funcionando como server con salida a internet, y me quedarian dos maquinas, una con windows y otra windows/linux. La pregunta es la siguiente e visto en la lista unos mensajes de maquinas que no usaban ni teclado ni placa de video, es esto posible con cualquier maquina o es un tipo de maquina especial. Mi maquina es un Pentium III 450 Mhz con 256 Mb de RAM el motherboard es un Asus P3BF. La pregunta es si hay alguna forma de hacer que la maquina arranque sin teclado ni placa de video y despues como son los pasos a seguir para instalar debian (supongo que es con una placa de video y un teclado colocados de forma temporal) y despues como se hace el mantenimiento, (por telnet desde alguna de las otras maquinas). Gracias de antemano y saludos. hay placas base que arrancan sin señal de video se utilizan mucho para construir clusters, sobre todo clase beowulf, pero dudo mucho que esa sea una de ellas, ademas te vale cualquiera, incluso quitandole los modulos de memoria solo tiene que dar señal, y nunca esta de mas poder conectar el monitor por ejemplo yo tengo un monocromo de deshecho en el ordenador que me hace de gateway y veo funcionando tcpdump o los mensajes de syslog, sin tener un terminal abierto, corriendo las aplicaciones a traves de ssh, de todas maneras un pentium III haciendo de gateway sin teclado y demas me parece mucho desperdicio, no te voy a decir que pongas un 486, sobre todo si tiene poca memoria etc, lo digo por aplicaciones muy interesantes como squid que utiliza una cache ram mas que interesante, pero hazte con un p1, con 32 megas por ejemplo que van de muerte, tienen mas ranuras pci para no complicarte la vida etc. un saludo jose maria
Re: IP_MASQUERADE
On 16 Jun 2001 22:08:20 -0400, [EMAIL PROTECTED] wrote: Hola de nuevo. Tengo un problema para poder compartir Internet con varias máquinas más. Ejecuto los pasos de configuración para el router con ipchains: ipchains -P forward -j Deny obteniendo el siguiente resultado: ipchains: -P requires a chain an a policy Ejecuto: ipchains -A forward -s 192.162.0.2/10 -d 00 -j MASQ obteniendo como resultado: WARNING you must enabling IP forwarding for packets to be forwarded at all: Use 'echo 1 /proc/sys/net/ipv4/ip_forward' ¿Alguien me puede explicar esto en cristiano? pues eso, que para habilitar el IP forwarding (necesario para lo que quieres hacer), tienes que ejecutar el comando: echo 1 /proc/sys/net/ipv4/ip_forward saludos -- Rodrigo Moya [EMAIL PROTECTED] [EMAIL PROTECTED] http://www.gnome-db.org/
Re: ximian-gnome1.4 (2)
On Sun, Jun 17, 2001 at 02:05:08PM +0200, IJAS wrote: Hola... Pues eso que no consigo instalar el ximian-gnome1.4 que viene en Mundo Linux por el método que dan en la web para instalación a partir de un CD (no me digais que lo haga desde la web porque mi conexión es de 28.8 Kbps :-( y son + de 80 Mb) así que me he copiado los ficheros desde el CD al siguiente arbol de directorios que he creado /root/Ximian/dists/potato/gnome14/binary-i386 ahora intento generar el Packages para lo que hago: dpkg-scanpackages gnome14/binary-i386 overridefile/nose/queponer \ dists/potato Packages el problema es que no se que poner como overridefile Pues algo tan simple como /dev/null ;) El fichero overrides se emplea en los ftp de Debian por los ftp-masters para poder cambiar ciertas cosas de los paquetes (por ejemplo la sección en la que van a ser instalados). -- José Carlos García Sogo Seahorse(-bonobo) developer jose jaimedelamo eu org http://seahorse.sourceforge.net Key-Id: 0x90788E11 Fingerprint = B06B 023F EAA6 37DC 1E62 B079 4BE0 5825 9078 8E11
Re: PROBLEMAS CON NETSCAPE 6.0, 6.01 6.1PR1
Donde has instalado los dichosos plugins? los has instalado en /usr/local/netscape/plugins/ ? intentaste dejarlos en tu carpeta local (~/.netscape/plugins/)? Eso te pasa por no usar programas debianizados ;) On Sun, 17 Jun 2001, aparra wrote: Hola! A ver si alguien sabe que me puede estar pasando. Tengo instlado en mi debian 2.2 la version 6.1PR1 de netscape, aunque he provado con las que digo arriba. Pues no consigo que me reconozca los plugins, ni los de serie, asi que no tengo ni siquiera java, ni falsh, ... Al poner about:plugins me dice que usa el fichero File name: /usr/local/netscape/plugins/libnullplugin.so .. Y que pasa con los demas Mi netscape esta intalado en /usr/local/netscape. Alguna idea??? Gracias por todo. Angel --- Fabian Arias Mu~oz | Debian GNU/Linux Sid Facultad de Cs. Economicas y | Kernel 2.4.5ac15 - ReiserFS Administrativas. | aka dewback en Universidad de Concepcion - Chile | #linuxhelp IRC.CHILE
desinstalar opera
aupa hace unos dias instalé el navegador opera para probrarlo. (en formato .deb). como navegador está muy bien pero la licencia y la publicidad que traen no me convencen nada de nada. me decido a desinstalarlo y la unica forma que encuentro es pasando directorio por directorio y borrando a saco. la pregunta: ¿hay alguna manera de hacerlo más limpiamente? Me imagino que esto pasara con todos los paquetes .deb que no me los baje con apt-get, verdá? veenga gracias por adelantado p. -- Peio Ziarsolo || [EMAIL PROTECTED] www.sindominio.net || [EMAIL PROTECTED] GnuPG public information: pub 1024D/13097E39 601B BA6F AE1E 9F1B CD51 32CF B144 3FE6 1309 7E39 pgpBV2S3J1dhU.pgp Description: PGP signature
Re: desinstalar opera
Peio wrote: aupa hace unos dias instalé el navegador opera para probrarlo. (en formato .deb). como navegador está muy bien pero la licencia y la publicidad que traen no me convencen nada de nada. me decido a desinstalarlo y la unica forma que encuentro es pasando directorio por directorio y borrando a saco. la pregunta: ¿hay alguna manera de hacerlo más limpiamente? Me imagino que esto pasara con todos los paquetes .deb que no me los baje con apt-get, verdá? veenga gracias por adelantado Buenas. Ejem, del man dpkg: dpkg -r|--remove | --purge paquete ... | -a|--pending Te da una pista eso? Un saludo
Re: desinstalar opera
me decido a desinstalarlo y la unica forma que encuentro es pasando directorio por directorio y borrando a saco. la pregunta: ¿hay alguna manera de hacerlo más limpiamente? Me imagino que esto pasara dpkg -r|--remove | --purge paquete ... | -a|--pending Tambien puedes hacer un apt-get remove paquete, y buscara las dependencias pertienentes que borrar si eliminas ese paquete. Z0MBiE / ELiTE (visit us at http://move.to/elite-hq)
Copiar el correo automáticamente del servidor de la universidad con programa de texto
¡Buenas! Me gustaría que el correo que recibo en el servidor de la universidad sea copiado de manera automática al disco duro de un ordenador dedicado en exclusiva a ello de forma ininterrumpida. En la universidad, el correo lo gestiona el servidor de correo post.uv.es, al que me conecto manualmente desde varios ordenadores (uno en Castellón y otro en Valencia) usando el Communicator. Siempre he usado este programa para el correo en Debian y ya puedo hacer lo que quiero en estos dos ordenadores usando el Communicator, pero al usarlos sólo de forma esporádica no puedo dejarlos conectados ininterrumpidamente (no es que desconfíe de la estabilidad de Debian: es que si hubiera un cortocircuito, incendio, inundación u otra catástrofe no quisiera que les pasara nada malo a estos ordenadores por estar conectados sin cuidados humanos: uno de ellos es de mi propiedad). Aparte, tengo un 486 (kelvin.uv.es) funcionando initerrumpidamente en un cuarto oscuro de la universidad. Si se estropeara por usarse en condiciones ambientales perniciosas (en un incendio, inundación, etc.) no lo lamentaría demasiado, por lo que quisiera que este ordenador se encarge de la copia de correo. El problema de kelvin es que a su disco duro le quedan sólo 4 Mb (de un total de 58), por lo que no puedo meterle el Communicator (y las X). Así que he pensado en meterle un programa de texto que me ofrezca la funcionalidad que conozco del Communicator. He leído que el pine era un lector de correo con soporte IMAP, por lo que lo he instalado en kelvin, pero al probarlo no he encontrado ninguna opción para usarlo de forma automática (ni siquiera para meterle la contraseña), y además es un paquete non-free que ni siquiera está disponible como binario en Debian, por lo que he sido bastante reticente a probarlo hasta que he leído en la una de las páginas webs de la universidad que era el cliente que recomandaban para los SOs unix. Seguro que es posible hacerlo con algún otro programa de correo, pero no sé cuál coger para probar. La verdad es que ni siquiera necesito leer o escribir correo: sólo quiero un programa que cada diez minutos mire si hay correo nuevo en post.uv.es y se baje el correo nuevo al disco duro sin borrarlo de post.uv.es, y que eso lo haga ininterrumpidamente desde el momento en que se lanza (puedo automatizar el lanzamiento, en caso de que se vaya la luz y el ordenador rebote, metiendo un script en /etc/rc.boot que llame al programa con las opciones que sean necesarias). ¡Muchas gracias! -- Conrado Badenas [EMAIL PROTECTED] PhD student | Assistant Lecturer Department of Thermodynamics | Department of Exp. Sciences Faculty of Physics | Univ. School of Tech. and Exp. Sciences University of Valencia | University Jaume I c/. Dr. Moliner, 50 | Campus del Riu Sec 46100 Burjassot (Valencia) | 12071 Castellón SPAIN
Re: Copiar el correo automáticamente del servidor de la universidad con programa de texto
Creo que lo que quieres no es un lector de correo, como pine, sino algo del estilo del fetchmail. Este te permite meterle todas las cuentas de correo que quieras y decirle cada cuanto tiempo quieres que mire para ver si tienes correo. También le puedes decir que no te borre los mensajes del servidor ... Suerte ... On 17 Jun 2001 21:38:07 +0200, Conrado Badenas wrote: ¡Buenas! Me gustaría que el correo que recibo en el servidor de la universidad sea copiado de manera automática al disco duro de un ordenador dedicado en exclusiva a ello de forma ininterrumpida. En la universidad, el correo lo gestiona el servidor de correo post.uv.es, al que me conecto manualmente desde varios ordenadores (uno en Castellón y otro en Valencia) usando el Communicator. Siempre he usado este programa para el correo en Debian y ya puedo hacer lo que quiero en estos dos ordenadores usando el Communicator, pero al usarlos sólo de forma esporádica no puedo dejarlos conectados ininterrumpidamente (no es que desconfíe de la estabilidad de Debian: es que si hubiera un cortocircuito, incendio, inundación u otra catástrofe no quisiera que les pasara nada malo a estos ordenadores por estar conectados sin cuidados humanos: uno de ellos es de mi propiedad). Aparte, tengo un 486 (kelvin.uv.es) funcionando initerrumpidamente en un cuarto oscuro de la universidad. Si se estropeara por usarse en condiciones ambientales perniciosas (en un incendio, inundación, etc.) no lo lamentaría demasiado, por lo que quisiera que este ordenador se encarge de la copia de correo. El problema de kelvin es que a su disco duro le quedan sólo 4 Mb (de un total de 58), por lo que no puedo meterle el Communicator (y las X). Así que he pensado en meterle un programa de texto que me ofrezca la funcionalidad que conozco del Communicator. He leído que el pine era un lector de correo con soporte IMAP, por lo que lo he instalado en kelvin, pero al probarlo no he encontrado ninguna opción para usarlo de forma automática (ni siquiera para meterle la contraseña), y además es un paquete non-free que ni siquiera está disponible como binario en Debian, por lo que he sido bastante reticente a probarlo hasta que he leído en la una de las páginas webs de la universidad que era el cliente que recomandaban para los SOs unix. Seguro que es posible hacerlo con algún otro programa de correo, pero no sé cuál coger para probar. La verdad es que ni siquiera necesito leer o escribir correo: sólo quiero un programa que cada diez minutos mire si hay correo nuevo en post.uv.es y se baje el correo nuevo al disco duro sin borrarlo de post.uv.es, y que eso lo haga ininterrumpidamente desde el momento en que se lanza (puedo automatizar el lanzamiento, en caso de que se vaya la luz y el ordenador rebote, metiendo un script en /etc/rc.boot que llame al programa con las opciones que sean necesarias). ¡Muchas gracias! -- Conrado Badenas [EMAIL PROTECTED] PhD student | Assistant Lecturer Department of Thermodynamics | Department of Exp. Sciences Faculty of Physics | Univ. School of Tech. and Exp. Sciences University of Valencia | University Jaume I c/. Dr. Moliner, 50 | Campus del Riu Sec 46100 Burjassot (Valencia) | 12071 Castellón SPAIN -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
RE: desinstalar opera
Aparte de todo esto, el Opera es un excelente navegador, tanto para linux como para Windows; eso si, en linux es bastante mosqueante lo de la publicidad,, aparte de que es muy grande tambien el banner, un 'bonita' forma de 'suavizar' el tema es, usando wwwoffle, el proxy que lleva por defecto Debian, y diciendole que filtre la URL's de publicidad del Opera y que en su caso, en vez de esas URL's ponga un .gif transparente que ya trae por defecto tambien el wwwoffle (no recuerdo el nombre de .gif, pero seguro que esta en algun directorio del susodicho wwwoffle) y asi ya no te ralentiza ni conexion y es mas llevadero el usar Opera,,, Espero haberte ayudado en algo mas... ya que lo de desinstalar ya se te ha dicho... ;-))) saludos. - Original Message - From: Juan (Casa) To: Peio Cc: Usuarios Debian Sent: Sunday, June 17, 2001 8:33 PM Subject: Re: desinstalar opera Peio wrote: aupa hace unos dias instalé el navegador opera para probrarlo. (en formato .deb). como navegador está muy bien pero la licencia y la publicidad que traen no me convencen nada de nada. me decido a desinstalarlo y la unica forma que encuentro es pasando directorio por directorio y borrando a saco. la pregunta: ¿hay alguna manera de hacerlo más limpiamente? Me imagino que esto pasara con todos los paquetes .deb que no me los baje con apt-get, verdá? veenga gracias por adelantado Buenas. Ejem, del man dpkg: dpkg -r|--remove | --purge paquete ... | -a|--pending Te da una pista eso? Un saludo -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null Otro servicio de la asoc. informatica abierta http://www.abierta.org
Re: Copiar el correo automáticamente del servidor de la universidad con programa de texto
Hola de vuelta: On Sun, 17 Jun 2001, Conrado Badenas wrote: ¡Buenas! Me gustaría que el correo que recibo en el servidor de la universidad sea copiado de manera automática al disco duro de un ordenador dedicado en exclusiva a ello de forma ininterrumpida. Para esto puedes usar fetchmail corriendo como daemon. De esta forma chequeara las cuentas remotas cada cierto numero de segundos progrmados y los dejara como si fuesen correo local. A mi me funciona de lo mas bien revisando todas mis cuentas externas (tanto por POP3 como IMAP) y las leo en forma local. {snip, snip} Seguro que es posible hacerlo con algún otro programa de correo, pero no sé cuál coger para probar. La verdad es que ni siquiera necesito leer o Para correo si no estas contento con la licencia de pine (que permite ser distribuido libremente en forma de source pro no de binario), puedes usar mutt que tiene licencia gnu/gpl o el viejo elm. Actualmente uso pine para todo y me funciona de la mass lindo, como lo mezclo con fetchmail, solo tengo que dejarlo que lea correo local, nada de complicaciones. escribir correo: sólo quiero un programa que cada diez minutos mire si hay correo nuevo en post.uv.es y se baje el correo nuevo al disco duro sin borrarlo de post.uv.es, y que eso lo haga ininterrumpidamente desde el momento en que se lanza (puedo automatizar el lanzamiento, en caso de que se vaya la luz y el ordenador rebote, metiendo un script en /etc/rc.boot que llame al programa con las opciones que sean necesarias). fetchmail tiene sus propios scripts de inicializacion como demonio en /etc/init.d/fetchmail. Por lo que queda corriendo en background como cualquier otro demonio revisando y adquiriendo cada una de las cuantas configuradas en el /etc/fetchmailrc. Por lo que no es necesario agregar nada extra a tu rc.boot. ¡Muchas gracias! De nada. Saludos. -- Conrado Badenas [EMAIL PROTECTED] PhD student | Assistant Lecturer Department of Thermodynamics | Department of Exp. Sciences Faculty of Physics | Univ. School of Tech. and Exp. Sciences University of Valencia | University Jaume I c/. Dr. Moliner, 50 | Campus del Riu Sec 46100 Burjassot (Valencia) | 12071 Castellón SPAIN --- Fabian Arias Mu~oz | Debian GNU/Linux Sid Facultad de Cs. Economicas y | Kernel 2.4.5ac15 - ReiserFS Administrativas. | aka dewback en Universidad de Concepcion - Chile | #linuxhelp IRC.CHILE
a ver.... modificar y crear floppy de instalacion debian
hola a todos, Estoy rompiéndome la cabeza con la modificación de los disco de instalación standard para debian. Mi idea es crear con mi manos una debian con reiserfs, XF4.0.3, mozilla 0.9.1 , kde 2.1.1. y kernel 2.2.19 (o 20 si sale a tiempo) El primero problema es crear los discos de 1.44 para el floppy y 2.88 para el cdrom. Ja estoy mirando otros discos tomado desde Debianplanet.org, pero todos tiene problemas al ponerlos en un CD. Ja he instalado el paquete boot-floppies y su medio mundo de dependencias aun no entiendo como funciona. Existe un HOWTO o un articulo explicativo? (en inglés, francés, italiano y castellano) -- Un saludo, MaX Massimo Biffi - icq: 100756110 mail: [EMAIL PROTECTED] LocTeam - Barcelona (Spain) - Localization Engineering Mac OS X - debianPPC - debian i386 - Mac OS 9.1 Powered by: Debian 2.2 Kernel 2.2.19 on Celeron 450a 128MB ReiserFS + Raid 0 Debian 2.3 Kernel 2.4.5 on PII 400 64MB + ReiserFS Debian 2.2 Kernel 2.2.18 on Apple G3 PPC 128MB - iMac Debian 2.2 r3 Kernel 2.2.17 on PowerBook G3 _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
grep y demás
que raro... si hago: tcpdump |grep -E 'jordi|magi' salen cosas por pantalla (hago un ping a jordi) Si hago: tcpdump |grep -E 'jordi|magi' p p se queda vacio, cuando seguro que tiene que haber cosas y si hago: tcpdump p p se llena si pongo: (tcpdump|grep...)p tampoco funciona (estoy con bash...) por qué pasa? aparte que sé que tcpdump tiene filtros, pero lo tengo que mirar... por cierto, la gente para que usa tcpdump? para esnifar un socket veo más cómodo sniffit, no? yo quiero ver qué programas para windows intentan enviar algo a algun sitio... tcpdump es la herramienta correcta? en verdad todos pasan por un servidor linux, con iptables, tambien podría activar el log de iptables... gracias y hasta pronto Carles Pina i Estany - #Linux User: 87347 - [EMAIL PROTECTED] - Pinux URL: http://www.salleURL.edu/~is08139 Debian Woody Kernel 2.4.5 @ PentiumII 450MHz 128MB ReiserFS Multihead Debian Woody Kernel 2.4.4 @ Laptop Pentium 166MHz 48MB Debian Potato Kernel 2.4.5 @ Pentium 233MHz 96MB ReiserFS No recuerdo cuanta memória queria. :-?
Re: IP_MASQUEREADE
2 lineas echo 1 /proc/sys/net/ipv4/ip_forward (le indicas la sistema que active el reenvio de paquetes (por defecto esta en 0)) y ipchains -A forward -s red_interna/mascara -j MASQ no aparece ni protocolo ni red destino ya que con la linea anterior le indicas al sistema que todo el trafico de tu red interna lo reenvie por la interface que posee la ip valida..(red externa). saludos. Pablo. _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Re:Re: Man Pages do Conectiva (GPL!)
Desenvolvedores, Gurus, etc- Afinal, qual é o estando da tradução das man pages no Debian? Eu não instalei o Debian em português, portanto, eu não sei. [ ]s Henry Caro Ricardo, Andei lendo algo à respeito da tradução das 'man-pages' nesta lista, porém não estou ao certo lembrado do contexto completo. Não querendo ser arrogante, mas não me preocupo em ter man-pages em inglês. O fato é que infelizmente boa parte das pessoas (em nosso país) não tem tanta sorte, e infelizmente não conseguem obter ajuda com tais manuais. Embora não goste muito do conectiva, não nego que já o tive instalado e me foi de grande ajuda (apesar das dores de cabeça). Entendo também que a tradução das man-pages beneficiará não apenas à comunidade Conectiva, mas também aos usuários de unix-like systems. Dentro de alguns termos, gostaria de me prontificar a auxilia-los na tradução/revisão de tais man-pages, na forma que me for cabível. Agradeço, Leonardo C. Custodio. _ Debian Linux: Resistance is futile! e-mail: [EMAIL PROTECTED] - Original Message - From: Ricardo Castanho de O. Freitas [EMAIL PROTECTED] To: debian-user-portuguese@lists.debian.org Cc: André Luiz Fassone Canova [EMAIL PROTECTED] Sent: Sunday, June 17, 2001 12:28 AM Subject: Man Pages do Conectiva (GPL!) Olá Pessoal! Acompanhei algumas mensagens sobre tradução das chamadas man pages... Se houver interesse em utiliza-las, é só entrar em contato com: André [EMAIL PROTECTED]. Ele é o atual Coordenador das traduções da LDP-BR. Ele pode informar o estágio atual de tradução e revisão. Faltam apenas 50 man pages para finalizar mais uma etapa! Portanto, toda e qualquer ajuda será bem-vinda! É um trabalho para toda a comunidade Linux! Portanto sob GPL! Não 'pertencem' à ninguem, exceto os autores e os usuários! Como todos sabem, existem divergências sobre a tradução de certos têrmos técnicos, tipos Kernel (cerne?, núcleo?..) ou qualquer outra palavra que alguns julgam já incorporadas em nosso jargão e, portanto, não deveriam ser traduzidas, mas tudo isto é sujeito à análise dos interessados. Por exemplo: Como ficaria a tradução do termo 'hash file'? Os técnicos já estão acostumados com o termo 'hash'...mas, e os novatos? Nada impede que novas revisões sejam efetuadas (sempre temos um tradutor e um revisor para cada página), basta acrescentar mais um nome de revisor ao término, mantendo todas as orientações sobre 'copyright' especificadas em cada página. []s Ricardo Castanho (um dos tradutores/revisores) -- == Ricardo C.O. Freitas [EMAIL PROTECTED] Linux user # 102240 = [EMAIL PROTECTED] user - SE440BX-2 PII-400-128Mb-2hd (13+4,3Gb) + Invicta 1L de Café Pilão© Machine # 96125 - CL6 + PINE (This msg is 100% MS Free!) = Your talents will be recognized and suitably rewarded.
Gnome problemas..
Como eu faço para arrumar esse tipow de error.. ? Unpacking gnome-session (from .../gnome-session_1.4.0.4-3_i386.deb) ... dpkg: error processing /var/cache/apt/archives/gnome-session_1.4.0.4-3_i386.deb (--unpack): trying to overwrite `/usr/share/man/man1/session-properties-capplet.1.gz', which is also in package gnome-control-center dpkg-deb: subprocess paste killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/gnome-session_1.4.0.4-3_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) falou. :) -- Powered by Deb1an GNU/Linux (sid) http://www.debian.org ** | .''`. | User: dselect___ | .''`. | | : :' : | Mail: [EMAIL PROTECTED] .|. | : :' : | | `. `'` | CPU: PENTIUM 233 MMX /V\ | `. `'` | | `-| HD: WD CAVIAR 13GB /( )\ | `-| | | Registered User: +0,005 ^`~'^| | ** | Never be led astray onto the path of virtue. | **
Gnome Errors!!
Unpacking libgnomeprint11 (from .../libgnomeprint11_0.25-ximian.6_i386.deb) ... dpkg: error processing /var/cache/apt/archives/libgnomeprint11_0.25-ximian.6_i386.deb (--unpack): trying to overwrite `/usr/share/man/man1/gnome-font-install.1.gz', which is also in package libgnomeprint-bin dpkg-deb: subprocess paste killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libgnomeprint11_0.25-ximian.6_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Alguém já passou por isso ? falo :_) -- Powered by Deb1an GNU/Linux (sid) http://www.debian.org ** | .''`. | User: dselect___ | .''`. | | : :' : | Mail: [EMAIL PROTECTED] .|. | : :' : | | `. `'` | CPU: PENTIUM 233 MMX /V\ | `. `'` | | `-| HD: WD CAVIAR 13GB /( )\ | `-| | | Registered User: +0,005 ^`~'^| | ** | Never be led astray onto the path of virtue. | **
Re: Gnome Errors!!
On Sun, Jun 17, 2001 at 05:38:01AM -0300, deb1an wrote: Unpacking libgnomeprint11 (from .../libgnomeprint11_0.25-ximian.6_i386.deb) ... dpkg: error processing /var/cache/apt/archives/libgnomeprint11_0.25-ximian.6_i386.deb (--unpack): trying to overwrite `/usr/share/man/man1/gnome-font-install.1.gz', which is also in package libgnomeprint-bin dpkg-deb: subprocess paste killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libgnomeprint11_0.25-ximian.6_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Alguém já passou por isso ? Várias vezes. É só usar dpkg --force-overwrite -i /var/cache/apt/archives/libgnomeprint11_0.25-ximian.6_i386.deb. Nota: Várias pessoas dizem que usar os debs da ximian é ruim, que é melhor você usar o gnome da debian só. Deve ter alguma relação com esses problemas. -- _ _ _| _ _ | _ . _ | _ carlos.debian.net Debian-BR Project (_(_|| |(_)_) |(_|\/|(_)|(_| uin#: 981913 (icq) debian-br.sf.net Linux: the choice of a GNU generation - Registered Linux User #103594
Re: Camisa Debian
On Fri, Jun 15, 2001 at 10:00:10AM -0300, Henrique de Moraes Holschuh wrote: On Fri, 15 Jun 2001, Marcelo Santana wrote: Alguém sabe informar onde encontro a camisa preta do Debian, que o pessoal estava usando na Linux Expo? Se for uma com debian/rules na frente, o assunto é comigo... Aliás, a piadinha com o debian/rules é tão sutil que eu não consegui deduzir de cara :-) -- One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie. -- The Silicon Valley Tarot Henrique Holschuh -- _ _ _| _ _ | _ . _ | _ carlos.debian.net Debian-BR Project (_(_|| |(_)_) |(_|\/|(_)|(_| uin#: 981913 (icq) debian-br.sf.net Linux: the choice of a GNU generation - Registered Linux User #103594
Re: Consegui funfar no lilo
Poderia nos informar o que fez (no seu caso) o lilo funfar ? Só pra não deixar a questão em aberto (muito útil pra quem consultar o histórico com problemas semelhantes). Abraços, Luis Alberto. Henrique Mecking wrote: bem, agora falta o x ai, eh impresssao minha ou o debian 2.2 q bem naquela revista nao copia os headers para /usr/src/linux ? fui instalar um modulo do meu modem(coisa fazia tranquilamente) e deu uma mensagem dizendo nao ter achado os headers no diretorio jah citado acima . Obrigado aos q tentaram ajudar Henrique. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] .
Re: Gnome Errors!!
On Sun, 17 Jun 2001 10:20:11 -0300 Carlos Laviola [EMAIL PROTECTED] wrote: On Sun, Jun 17, 2001 at 05:38:01AM -0300, deb1an wrote: Unpacking libgnomeprint11 (from .../libgnomeprint11_0.25-ximian.6_i386.deb) ... dpkg: error processing /var/cache/apt/archives/libgnomeprint11_0.25-ximian.6_i386.deb (--unpack): trying to overwrite `/usr/share/man/man1/gnome-font-install.1.gz', which is also in package libgnomeprint-bin dpkg-deb: subprocess paste killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libgnomeprint11_0.25-ximian.6_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Alguém já passou por isso ? Várias vezes. É só usar dpkg --force-overwrite -i /var/cache/apt/archives/libgnomeprint11_0.25-ximian.6_i386.deb. Nota: Várias pessoas dizem que usar os debs da ximian é ruim, que é melhor você usar o gnome da debian só. Deve ter alguma relação com esses problemas. Tenho instalado o ximian em meu potato e não tive estes tipos e problemas. Bem, possue alguns problemas com omissão de dependências nos pacotes. Ale disso e red-carpet e bem funcional. Fabiano -- _ _ _| _ _ | _ . _ | _ carlos.debian.net Debian-BR Project (_(_|| |(_)_) |(_|\/|(_)|(_| uin#: 981913 (icq) debian-br.sf.net Linux: the choice of a GNU generation - Registered Linux User #103594 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- //|||\\///|||//|||\\ || /\ || Debian GNU/Linux 2.2r3|| _ || || /@@\|| Linux lottar 2.2.18pre21 || () || ||/(__)\ ||Pentium 200 MMX 40Mb||/(_)\|| || ^ ^|| Fabiano Manoel de Andrade ||_/ \_|| || || [EMAIL PROTECTED] || || \\|||//\\\|||\\|||//
Re: (linux-br) kylix --- Onde achar???
On Mon, May 28, 2001 at 03:51:31PM -0300, Correa, Mario Aparecido (Mario)** CTR ** wrote: All Ainda estamos usando a lista para fezer pirataria do Kylix ? Acreditava não estarmos aqui para isso e sim para apoiar a GNU e suas filosofias ... Pelo que eu sei, vai haver uma versão freeware do Kylix, com a limitação de só poder criar programas que sejam open source. Quanto a sua posição de pirataria, até o Stallman acredita que isso seja FUD. Tem um texto interessante no site dele, ou da GNU, falando sobre isso. Dá uma procurada. Se quizer fazer pirataria, faça-o do Delphi 6.0 para o tal do Windows que já está acostumado com isso e, é a mesmo coisa que o Kylix. Ai é só esperar 16/06 para fazer o Download oficial da Borland .. TKS Mário Corrêa -Original Message- From: leofarma [mailto:[EMAIL PROTECTED] Sent: Monday, May 28, 2001 1:30 PM To: linuxbh; lista debian; linux-br@bazar.conectiva.com.br Subject: (linux-br) kylix --- Onde achar??? Ola povo. Onde posso encontrar alguma versao do Kylix para baixar. Procurei no historico da linux-br e tem um link, so que ta quebrado... Leo -- _ _ _| _ _ | _ . _ | _ carlos.debian.net Debian-BR Project (_(_|| |(_)_) |(_|\/|(_)|(_| uin#: 981913 (icq) debian-br.sf.net Linux: the choice of a GNU generation - Registered Linux User #103594
Re: Como fazer o sawfish o wm padrão?
On Mon, May 28, 2001 at 08:11:03PM -0300, Rafael Sasaki wrote: Não estou conseguindo inicializar o X (startx) direto com o sawfish. Ele sempre entra com um outro (acho que é o twm) e depois eu tenho que trocar. Alguém sabe como posso fazer para mudar isso? Também pode ser mudado da seguinte forma: como root, use update-alternatives --auto x-window-manager, ou outra opçao que queira (como, p.ex., instalar manualmente outro programa como x-window-manager padrão). Dá uma olhada em update-alternatives(8). P.S.: Eu sei que a mensagem é antiga 8) Obrigado, Rafael Sasaki -- _ _ _| _ _ | _ . _ | _ carlos.debian.net Debian-BR Project (_(_|| |(_)_) |(_|\/|(_)|(_| uin#: 981913 (icq) debian-br.sf.net Linux: the choice of a GNU generation - Registered Linux User #103594
Fw: ITP cdcontrol
Meu povo, vamos aplaudir mais um programa nacional entrando no Debian ;) []s! Começo da mensagem encaminhada: Date: Sat, 16 Jun 2001 16:52:18 -0400 From: Gleydson Mazioli da Silva [EMAIL PROTECTED] Subject: ITP cdcontrol Hi, I've released the first public cdcontrol today and I would like to see it in the Debian archives. I've licensed CDcontrol under GPL licence and it could be downloaded from http://cdcontrol.sourceforge.net The first public and stable release is 1.70 and it's fully compatible with Linux and FreeBSD systems. Next, a part of CDcontrol README file: --- CDcontrol is a parallel writting burner. It allow you to write to a unlimited number or CD writers (IDE and SCSI) at once time. It's main base is the cdrecord and cdda2wav program. The cdcontrol is the first system such that type that I know for *nix world and it's all under GPL license. Some of it features are better than commercial systems that I've hear about (and fully support CD images and all data type supported by cdrecord program), one of these features is the separated control of each recorder once the recording is started (avoiding problems due a fail or speed problem in other writers). Each of that children, take control of the errors messages and status of each writter, reporting the status in the user level and tech level (for repair or something like). The inteliggent error checking mechanism is based in some time of writers repair that I gave, repairing most types of recorders (IDE and SCSI) from many manufactures. It take the appropriate decision if a error happens. The cdcontrol itself has a daily production report for each writter and fails of writting, in cases of more serious errors, a technical report is also written (it's content is a full cdrecord output for that writter, plus the time when it happens). Added with the separated control of each writter, is included a system to auto disable the writter in some consecutive internal writter errors happen (no users errors are computed). Other interesting feature is the automatic calculation of copies, enabling only the writers requested to complete the number and skipping all that are disabled. The cdrecord program is developed to allow you to find it useful and powerful to make you audio/data copy in one or more writers. Gleydson Mazioli da Silva [EMAIL PROTECTED] --- I'm already ready to upload the cdcontrol Debian package, if no one objection I will do that :-) Greetings --- Gleydson Mazioli da Silva [EMAIL PROTECTED] [EMAIL PROTECTED] -- Gustavo Noronha Silva - kov http://www.metainfo.org/kov ** | .''`. | Debian GNU/Linux: http://www.debian.org| | : :' : | Debian BR...: http://debian-br.sourceforge.net | | `. `'` | Be Happy! Be FREE! | | `-| Think globally, act locally! | **
Kernel-2.4.5
HI people, Good Sunday for All. Resolvi deixar a moleza de lado e horar o nome de usuário Linux. Hoje cedinho liguei o computador e disse para ele: hoje o senhor vai ter que fazer as pazes com a placa de som. Para começar baixei o source do kernel-2.4.5 do www.kernel.org e mais alguns tutoriais, e fui a luta, como nunca havia compilado um kernel antes, achei que iria demorar demais com meu MMX 233 e 64 MB de RAM, mas foi bem menos que minha expectativa; Ainda bem. O fato é que o som está funcionando beleza!... Apenas uma pequena exceção, só estou conseguindo ouvir som como root, como usuário normal Reason: Permission Denied, nada que algumas alterações de permissão não possa resolver. Testei as demais funcionalidades do sistema e me parece que só o ipchains não está funcionando. Se alguém tiver alguma dica sobre regras do iptable aceita-se de bom grado. Thanks!. -- __ ___ _ __ / |/ /__ _(_)__ / / [EMAIL PROTECTED] / /|_/ / _ `/ __/ / -_) / [EMAIL PROTECTED] /_/ /_/\_,_/\__/_/\__/_/ ICQ 44570007.
Re: Kernel-2.4.5
Em Sun, 17 Jun 2001 15:50:12 + Francisco Maciel [EMAIL PROTECTED] Escreveu: HI people, Good Sunday for All. Resolvi deixar a moleza de lado e horar o nome de usuário Linux. Hoje cedinho liguei o computador e disse para ele: hoje o senhor vai ter que fazer as pazes com a placa de som. Para começar baixei o source do kernel-2.4.5 do www.kernel.org e mais alguns tutoriais, e fui a luta, como nunca havia compilado um kernel antes, achei que iria demorar demais com meu MMX 233 e 64 MB de RAM, mas foi bem menos que minha expectativa; Ainda bem. O fato é que o som está funcionando beleza!... Apenas uma pequena exceção, só estou conseguindo ouvir som como root, como usuário normal Reason: Permission Denied, nada que algumas alterações de permissão não possa resolver. Testei as demais funcionalidades do sistema e me parece que só o ipchains não está funcionando. Se alguém tiver alguma dica sobre regras do iptable aceita-se de bom grado. Eu recebi um e-mail que continha o endereço de um zine e tinha uma introdução ao ipchains legalzinha para quem nunca mecheu, eu sugiro também as documentações da LinuxDoc. Zine: http://www.itjournal.com.br LinuxDoc: http://www.linuxdoc.org Thanks!. Abraços -- Kairo F. de Araújo Pessoal Infos:| Organizador/Fundador http://kairo.cjb.net | Grupo de Usuário GNU/Linux de Juiz de [EMAIL PROTECTED] - UIN: 45349054| Fora-MG - http://linuxjf.jfnet.com.br Administrador de Redes| Projeto de Implantação do CIPSGA Saúde Colégio e Curso | PIC http://www.saudevestibulares.com.br | http://www.cipsga.org.br .''`. Debian GNU/Linux User BR #181 - Linux User Registered #188447 : :' : GnuPG User - Caso necessite das chaves públicas, solicite. `. `'` Não envie emails em HTML, ASCII owna !! `-Não é necessário citar esta assinatura nas Repostas. Thanx!
Re: Kernel-2.4.5
Bom pessoal, Meus agradecimento a essa comunidade solidária!... Para não sobrecarregar a lista vou responder a todos que até este momento retornarão minha mensagem apenas com esta mensagem: Fabiano, Há dias, vinha tentando fazer minha placa de som funcionar; rodava o sndconfig o som ficava beleza, só que ao desligar a máquina perdia toda configuração da placa de som. tentei instalar o módulo sb ao kernel mas o modconf me retornava erro... IRQ ou DMA, tentei resolver com insmod, modprobe, isapnp... A lista me deu váias dicas importantes. Mas o fato é que nada funcionou!. Achei que se ao invés de adcionar módulo, compilace um kernel com o módulo incluso dava certo!, e deu. Aproveitei inclui também minha placa de rede. O novo kernel ficou um pouco maior que o da instalação original, não se é normal ou eu dei mancada, mas como essa é minha primeira vez vou aguardar um pouco para ver o que ocorre com o decorrer do tempo!. Kairo, Obrigado pela dica. De regras do ipchais conheço o trivial, básico para meu uso diário, é que no kernel-2.4 em diante, são outras, e essas outras é que estou precisando estudar ao menos o básico. Vou visitar os endereços citados por você. Obrigado!. Edson, Obrigadão pela dica. Estou gostando do espirito fraterno da turma aqui do Debian; com certeza fiz a escolha certa quando mudei de distro. --- Andre Luís, Obrigado, é isso que precisando. Vou até lá. --- On Sun, 17 Jun 2001 16:04:14 + Fabiano Manoel de Andrade [EMAIL PROTECTED] wrote: Offtopic. Hi my friend. Bem eu tenho problemas com minha plca de som e ainda não consegui ajeitá-la. Qual é o problema que você tinha antes? Qual é sua placa de som? Fabiano. On Sun, 17 Jun 2001 15:50:12 + Francisco Maciel [EMAIL PROTECTED] wrote: HI people, Good Sunday for All. Resolvi deixar a moleza de lado e horar o nome de usuário Linux. Hoje cedinho liguei o computador e disse para ele: hoje o senhor vai ter que fazer as pazes com a placa de som. Para começar baixei o source do kernel-2.4.5 do www.kernel.org e mais alguns tutoriais, e fui a luta, como nunca havia compilado um kernel antes, achei que iria demorar demais com meu MMX 233 e 64 MB de RAM, mas foi bem menos que minha expectativa; Ainda bem. O fato é que o som está funcionando beleza!... Apenas uma pequena exceção, só estou conseguindo ouvir som como root, como usuário normal Reason: Permission Denied, nada que algumas alterações de permissão não possa resolver. Testei as demais funcionalidades do sistema e me parece que só o ipchains não está funcionando. Se alguém tiver alguma dica sobre regras do iptable aceita-se de bom grado. Thanks!. -- __ ___ _ __ / |/ /__ _(_)__ / / [EMAIL PROTECTED] / /|_/ / _ `/ __/ / -_) / [EMAIL PROTECTED] /_/ /_/\_,_/\__/_/\__/_/ ICQ 44570007. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- //|||\\///|||//|||\\ || /\ || Debian GNU/Linux 2.2r3|| _ || || /@@\|| Linux lottar 2.2.18pre21 || () || ||/(__)\ ||Pentium 200 MMX 40Mb||/(_)\|| || ^ ^|| Fabiano Manoel de Andrade ||_/ \_|| || || [EMAIL PROTECTED] || || \\|||//\\\|||\\|||// -- __ ___ _ __ / |/ /__ _(_)__ / / [EMAIL PROTECTED] / /|_/ / _ `/ __/ / -_) / [EMAIL PROTECTED] /_/ /_/\_,_/\__/_/\__/_/ ICQ 44570007.
Re: Kernel-2.4.5
-BEGIN PGP SIGNED MESSAGE-Hash: SHA1 Qto ao som vc não precisa mudar a permissão , qdo me indicaram umasolução foi de entrar em /etc/group , no campo "audio" logo depois do: colocar os nomes dos usuarios que vc deseja que usem o audio cadaum separado por virgula []`s /*- -- email [EMAIL PROTECTED] /email irc irc.openprojects.net | Canal #Debian-br /irc deb-br http://debian-br.sourceforge.net /deb-br news www.debianplanet.org /news icq UIN #72974241 /icq- --- */ -BEGIN PGP SIGNATURE-Version: PGPfreeware 7.0.3 for non-commercial use http://www.pgp.com iQA/AwUBOy0afrvphCHEu7TmEQK9VwCbB6uv3qK/yh2U7g4R5Jn0R9l1KmIAoOgkaOdF9gJU51x0po9uN8L2KGAc=62jp-END PGP SIGNATURE-
KERNEL 2.4.x
Olá pessoal, se alguem puder me ajudar, gostaria de uma maozinha numa parada aqui !! quando compilo o kernel 2.4.x a placa de som funciona na boa !! mas da pau no PPP naum conecta mais !! soh com o kernel antigo !! Pois bem a debian postou uma matéria !! e basta adicionar umas linhas na source list !! para solucionar o problema e pegar o modutils novo, e mais alguns programinhas !! Mas continua dando pau !! Alguem sabe p que pode ser !!??!? Obrigado !!!
Re: Kernel-2.4.5
O debian tem um frontdend simples pra executar tal tarefa, confira em: $ man adduser No caso do som, o recomendável seria: $ adduser debianuser audio Esse comando incluirá o usuário 'debianuser' no grupo audio, o que garantirá o acesso aos dispositivos de som do sistema, de acordo com as perimssões/grupos padrão do debian. Aproveitando, o acesso ao modem (imagino que aos outros dispositivos também: ls -l /dev) funciona da mesma forma, o grupo é dip. Abraços, Luis Alberto. HardBeat404 wrote: -BEGIN PGP SIGNATURE- Version: PGPfreeware 7.0.3 for non-commercial use http://www.pgp.com iQA/AwUBOy0afrvphCHEu7TmEQK9VwCbB6uv3qK/yh2U7g4R5Jn0R9l1KmIAoOgk aOdF9gJU51x0po9uN8L2KGAc =62jp -END PGP SIGNATURE- Qto ao som vc não precisa mudar a permissão , qdo me indicaram uma solução foi de entrar em /etc/group , no campo audio logo depois do : colocar os nomes dos usuarios que vc deseja que usem o audio cada um separado por virgula []`s /* - -- email [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] /email irc irc.openprojects.net | Canal #Debian-br /irc deb-br http://debian-br.sourceforge.net /deb-br news www.debianplanet.org http://www.debianplanet.org /news icq UIN #72974241 /icq - -- - */
Re: KERNEL 2.4.x
Em Sun, 17 Jun 2001 17:46:22 -0300 marcio [EMAIL PROTECTED] Escreveu: Olá pessoal, Olá se alguem puder me ajudar, gostaria de uma maozinha numa parada aqui !! quando compilo o kernel 2.4.x a placa de som funciona na boa !! mas da pau no PPP naum conecta mais !! soh com o kernel antigo !! Pois bem a debian postou uma matéria !! e basta adicionar umas linhas na source list !! para solucionar o problema e pegar o modutils novo, e mais alguns programinhas !! Sim a entrade é: deb http://www.snobis.de/debian extras/kernel24/ Comente as outras e deixe esta descomentada, de um apt-get update e um apt-get dist-upgrade Mas continua dando pau !! Alguem sabe p que pode ser !!??!? Bem, de acordo o esta documentação: /usr/share/doc/ppp/README.linux Seria necessário para o kernel 2.4.X executar estes comandos: # mknod /dev/ppp c 108 0 # chmod 600 /dev/ppp Mais no meu sistem depois de atualizar o PPP pela aquela entrada no /etc/apt/sources.list não foi necessário, mas quem sabe funcione. Obrigado !!! Abraços -- Kairo F. de Araújo Pessoal Infos:| Organizador/Fundador http://kairo.cjb.net | Grupo de Usuário GNU/Linux de Juiz de [EMAIL PROTECTED] - UIN: 45349054| Fora-MG - http://linuxjf.jfnet.com.br Administrador de Redes| Projeto de Implantação do CIPSGA Saúde Colégio e Curso | PIC http://www.saudevestibulares.com.br | http://www.cipsga.org.br .''`. Debian GNU/Linux User BR #181 - Linux User Registered #188447 : :' : GnuPG User - Caso necessite das chaves públicas, solicite. `. `'` Não envie emails em HTML, ASCII owna !! `-Não é necessário citar esta assinatura nos replys(repostas). thanx!
Re: Gnome Errors!! red-carpet ERROR.
* Carlos Laviola ([EMAIL PROTECTED]) wrote: On Sun, Jun 17, 2001 at 05:38:01AM -0300, deb1an wrote: Unpacking libgnomeprint11 (from .../libgnomeprint11_0.25-ximian.6_i386.deb) ... dpkg: error processing /var/cache/apt/archives/libgnomeprint11_0.25-ximian.6_i386.deb (--unpack): trying to overwrite `/usr/share/man/man1/gnome-font-install.1.gz', which is also in package libgnomeprint-bin dpkg-deb: subprocess paste killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libgnomeprint11_0.25-ximian.6_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Alguém já passou por isso ? Várias vezes. É só usar dpkg --force-overwrite -i /var/cache/apt/archives/libgnomeprint11_0.25-ximian.6_i386.deb. Nota: Várias pessoas dizem que usar os debs da ximian é ruim, que é melhor você usar o gnome da debian só. Deve ter alguma relação com esses problemas. -- _ _ _| _ _ | _ . _ | _ carlos.debian.net Debian-BR Project (_(_|| |(_)_) |(_|\/|(_)|(_| uin#: 981913 (icq) debian-br.sf.net Linux: the choice of a GNU generation - Registered Linux User #103594 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] Eu fiz oq vc falou. Ele instalo o libgnomeprint-bin. Certo, mas quando foi instalar o red-carpet da error em outro pack. E não estou conseguindo assim, finalizar a install do red-carpet. o erro é esse: PS- Eu fiz oq vc falou. (dpkg --force-overwrite -i blablablabla). Agradeço a todos :)~ Setting up libgnomeprint11 (0.25-ximian.6) ... dpkg: error processing libgnomeprint11 (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of libgtkhtml9: libgtkhtml9 depends on libgnomeprint11 (= 0.25); however: Package libgnomeprint11 is not configured yet. dpkg: error processing libgtkhtml9 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of red-carpet: red-carpet depends on libgtkhtml9 (= 0.9.2-2); however: Package libgtkhtml9 is not configured yet. dpkg: error processing red-carpet (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: libgnomeprint11 libgtkhtml9 red-carpet E: Sub-process /usr/bin/dpkg returned an error code (1) -- Powered by Deb1an GNU/Linux (sid) http://www.debian.org ** | .''`. | User: dselect___ | .''`. | | : :' : | Mail: [EMAIL PROTECTED] .|. | : :' : | | `. `'` | CPU: PENTIUM 233 MMX /V\ | `. `'` | | `-| HD: WD CAVIAR 13GB /( )\ | `-| | | Registered User: +0,005 ^`~'^| | ** | Never be led astray onto the path of virtue. | **
Re: Consegui funfar no lilo
-Original Message- From: Luis Alberto Garcia Cipriano [EMAIL PROTECTED] To: debian-user-portuguese@lists.debian.org debian-user-portuguese@lists.debian.org Date: Domingo, 17 de Junho de 2001 12:29 Subject: Re: Consegui funfar no lilo Poderia nos informar o que fez (no seu caso) o lilo funfar ? Só pra não deixar a questão em aberto (muito útil pra quem consultar o histórico com problemas semelhantes). Claro Luis, bem eu simplesmente instalei o debian no hd de 40 gigas e deixei o de 1gb de backup . ou seja ficaram os dois sistemas(windwows e debian) no mesmo hd. De um modo ou de outro consegui fazer funcionar mas agora q eu fiquei bolado com o lilo eu fiquei :), pq, acabou q a lba32 adicionada nao adiantou de nada ... Isso faz parte ehhehe Abraços, Luis Alberto. Abracos, Henrique.
Re: Gnome Errors!! red-carpet ERROR.
Em Sun, 17 Jun 2001 21:33:36 -0300 deb1an [EMAIL PROTECTED] escreveu: Setting up libgnomeprint11 (0.25-ximian.6) ... dpkg: error processing libgnomeprint11 (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of libgtkhtml9: libgtkhtml9 depends on libgnomeprint11 (= 0.25); however: Package libgnomeprint11 is not configured yet. dpkg: error processing libgtkhtml9 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of red-carpet: red-carpet depends on libgtkhtml9 (= 0.9.2-2); however: Package libgtkhtml9 is not configured yet. dpkg: error processing red-carpet (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: libgnomeprint11 libgtkhtml9 red-carpet E: Sub-process /usr/bin/dpkg returned an error code (1) arf... erro no postinst... heh... faz isso: echo -n -e #!/bin/sh\necho eu sou nerd\n /var/lib/dpkg/info/libgnomeprint11.postinst heehe deve dar certo... antes de fazer, salve o arquivo /var/lib/dpkg/info/libgnomeprint11.postinst, se não der certo, manda esse arquivo atachado pra lista... Powered by Deb1an GNU/Linux (sid) http://www.debian.org aha! aqui está o erro! se você tem essa dúvida deveria estar usando potato +)=) []s! -- Gustavo Noronha Silva - kov http://www.metainfo.org/kov ** | .''`. | Debian GNU/Linux: http://www.debian.org| | : :' : | Debian BR...: http://debian-br.sourceforge.net | | `. `'` | Be Happy! Be FREE! | | `-| Think globally, act locally! | **
Prog em C
Ae irmaos , gostaria de alguns links de Homepages sobre programaçao em C , pode ser em ingles mesmo! tks desde jah! []'s -- * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Alex Gripp sl4ck Niterói - RJ * * Undergratuated Electric Electronic Engineering Student from University Federal Fluminense - UFF * * [UIN] 115793272 -o) * * [e-mail] [EMAIL PROTECTED] /\ Be Free * * [Linux User] 100787 _\_v Use GNU/Linux * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: Consegui funfar no lilo
o Debian não instala nada que você não precise/queira a não ser que você peça...: apt-get install kernel-headers-versão E eles não vão para /usr/src/linux, mas para /usr/src/kernel-headers-versão. Se quiser, você pode então fazer um link. -- Ja ne, Pazu [EMAIL PROTECTED] Chave GPG em http://www.animegaiden.com.br/pazu/pazu.gpg Você é mesmo quem faz chover, uma chuva de sangue. -- Rurouni Kenshin, Tsuioku Hen pgpxirQXflM6Q.pgp Description: PGP signature
Re: Prog em C
Em Sun, 17 Jun 2001 23:40:00 + Alex Gripp [EMAIL PROTECTED] escreveu: Ae irmaos , gostaria de alguns links de Homepages sobre programaçao em C , pode ser em ingles mesmo! hmmm você não especificou o que queria.. básico ou avançado... bom, básico tem aqui: http://ead1.ee.ufmg.br/cursos/C não faça crossposting... é chato receber numa lista mensagens que foram pra outra lista... []s! -- Gustavo Noronha Silva - kov http://www.metainfo.org/kov ** | .''`. | Debian GNU/Linux: http://www.debian.org| | : :' : | Debian BR...: http://debian-br.sourceforge.net | | `. `'` | Be Happy! Be FREE! | | `-| Think globally, act locally! | **
Configuring X Server during Install
I have been trying to install Debian on my Toshiba 2180CDT laptop. But I just can't get X server to work. My Monitior is Plug-n-Play on S3 Inc. ViRGE/MX My monitior support 800x600 resolution in 8,16,or 24- Bit It can do 640x480 but the screen is then small. Can any suggest settings I can use? Also how do I shut down Debian from the Command Line?
Re: Debian at Flying J
On Sat, Jun 16, 2001 at 09:53:56PM -0500, Cameron Matheson wrote: This worked great, but they said they needed to be able to do remote admin. I installed ssh, but they wanted to have X, not the console, and they had to be able to do it from windoze. I decided VNC was my answer, so I came up w/ this crude solution: You'd probably have less hassle from a X for windows solution wondering if anyone's ever been able to successfully run X on a TV, and what they had to do to their XF86Config file. The Video cards are ATI [EMAIL PROTECTED] if that matters (they have S-Video and standard TV outputs). it seems you have to either compile the vesafb into the kernel and start up in a tv-friendly mode (and use X3 or X4 fbdev driver), or use X4's vesa driver. The tvs should be plugged in at card boot time, and should 'just work'. Or so I'm told -- I have a radeon, and it's not *that* simple :/ If you're seeing framebuffer console on the tv output, X via fbdev should be a non brainer. -- John Lenton ([EMAIL PROTECTED]) -- Random fortune: Chimenea nueva blanca unos días, y al cabo negra. pgp80N365tS3B.pgp Description: PGP signature
Re: Debian at Flying J - tv-out
hi ya cameron I recently (Three days ago) acquired a job at Tons Services (the good... Everything works great, but right now I'm running this stuff on Monitors. I hooked the video cards up to some TV's, and the display looks fine in the console, but X windows doesn't work w/ it. I was wondering if anyone's ever been able to successfully run X on a TV, and what they had to do to their XF86Config file. The Video cards are ATI [EMAIL PROTECTED] if that matters (they have S-Video and standard TV outputs). i've not been able to get X11 to display on the tv... win98 displays fine on the (real) tv but not x11... no driver for svga to nstsc or equivalent... - tried matrox G2xx/G4xx , netstream2000, ati rage/wonder.. some motherboards comes with ntsc/svideo/tv-out signals but we never tested those motherboards... good luck to ya alvin http://www.Linux-Video.net
Re: Init not behaving the way man says it does?
* Craig McLean ([EMAIL PROTECTED]) wrote: Ok so the rc script explains why not all of the S/K entries get run on runlevel changes. My next question: The init man page says all of the processes in the same process group as init that aren't also in the next run level should get a SIGTERM and a SIGKILL signal killing them. This doesn't seem to be happening. cron and syslog are both in the same process group as init but they aren't getting killed. As an experiment I removed the cron and syslog entries from rc4.d and then trasferred to run level 4 from 2. Yet cron and syslog weren't killed. Incidentally I don't think the removing of entries from the run level directories should make a difference anyways because I know that init doesn't actually have any knowledge of rc directories. I do know that when I transfer between various user defined run levels the signals aren't getting sent, but when I transfer between from a user defined run level to a system runlevel the signals do get sent. true -- init knows nothing of the /etc/rc?.d/ directories. but init knows about /etc/inittab, which contains the line l0:0:wait:/etc/init.d/rc 0 l1:1:wait:/etc/init.d/rc 1 l2:2:wait:/etc/init.d/rc 2 l3:3:wait:/etc/init.d/rc 3 l4:4:wait:/etc/init.d/rc 4 l5:5:wait:/etc/init.d/rc 5 l6:6:wait:/etc/init.d/rc 6 # Normally not reached, but fallthrough in case of emergency. z6:6:respawn:/sbin/sulogin which reveal that, on entry to, say, runlevel 3, the script /etc/init.d/rc is run with a sole argument 3. looking at the /etc/init.d/rc script, it uses its sole argument to determine which /etc/rc?.d/ directory to look in; there, it runs any K* scripts with an argument stop, and then any S* scripts with an argument start. if a K* script doesn't send any kill -HUP `pidof mydaemon` then the process mydaemon, if running, will stay running. likewise, if a S* script doesn't actually launch a daemon, then no daemon is launched. in february of 2000 (when the manpage for init was last tweaked, from what i can tell) init may have operated they way it's describe there. but the way it works on debian potato is that it calls a script (/etc/init.d/rc) that calls scripts (/etc/rc*.d/[KS]*) with certain arguments. they're spozed to be the ones to do the job -- and this is a nice, new, modular layout. you've discovered the biggest achilles' heel of the *nix world: the documentation was probably right at one point, but... to determine that point, check the last-modified date and keep exploring if you need to... -- DEBIAN NEWBIE TIP #39 from Roy Culley [EMAIL PROTECTED] : Wondering why the pundits say that CSH SCRIPTS ARE CONSIDERED HARMFUL? Although tcsh has improved on csh there are still issues. For the full scoop, read http://www.faqs.org/faqs/unix-faq/shell/csh-whynot/ Also see http://newbieDoc.sourceForge.net/ ...
Re: [slightly OT] 486 50mhz 16ram 258mb HD
on Sat, Jun 16, 2001 at 05:03:02PM -0400, D-Man ([EMAIL PROTECTED]) wrote: On Sat, Jun 16, 2001 at 09:37:48AM -0700, Karsten M. Self wrote: | on Sat, Jun 16, 2001 at 05:57:05PM +0200, Brendon ([EMAIL PROTECTED]) wrote: | | ah, that's good to hear. one question though: how large should the swap | partition be.. ? i usually use one that is slightly larger than my RAM but | with only 16 to begin with i'd think i'd need about 50mb swap. | | Size swap to tasks. My rule of thumb is 1-2x RAM, though in practice, I | usually allocate 3x RAM on a new machine on the basis that I might | upgrade memory, and it's a PITA to allocate more swap (at least as a | partition), so this gives some built-in expandability. I have a 486 with 8MB RAM and I allocated 32MB swap. It runs fine (basically just ipmasq at the moment), but I'm looking into making it a diskless (X)term instead. Too much swap and...well, you've got too much swap. At some point you just want to say uncle, and admit you're out of memory. I've run into problems with Galeon processes growing to larger than physical memory. Swapping makes the program run glacially. For your whole system to do this would be a bad thing. | For IP filter and NAT, you won't need much swap. Running a Squid proxy, | say, will benefit from more memory, which is bloody cheap at the moment, | and still going down, though old-style strips may be harder to find or | higher in price. New memory (SDRAM) is rather cheap. I just saw a 256MB DIMM for $80 at a store. OTOH old memory (Fast Page Mode or EDO) is ~$80 for a 32MB SIMM, unfortunately. There is a local store that deals with used parts that has some old Pentiums (some with 32MB RAM) for $100 (case, mobo, cpu, hd, NIC). Thanks, that helps with a friend who'se putting together an old box from odd parts. Currently has 32 MB, but should see more. -- Karsten M. Self kmself@ix.netcom.comhttp://kmself.home.netcom.com/ What part of Gestalt don't you understand? There is no K5 cabal http://gestalt-system.sourceforge.net/ http://www.kuro5hin.org Are these opinions my employer's? Hah! I don't believe them myself! pgpOeu8DClLVe.pgp Description: PGP signature
Re: Any program to help achitectural drawing?
octree, available from http://www.octree.de is a fully operational CAD application (for architects) in beta which runs on Debian. Not gpl'ed, but free$. -- Giulio Morgan
Re: prevent logrotate
S == S Breedveld [EMAIL PROTECTED] writes: S Hello, how can I prevent logrotate to gzip specific directory's in S /var/log? Edit the appropriate file in /etc/logrotate.d/ . (It's a configuration file, and it won't be overwritten by an upgrade.) -- G. ``Iggy'' Geens - ICQ: #64109250 Home: [EMAIL PROTECTED] - Work: [EMAIL PROTECTED] WWW: http://users.pandora.be/guy.geens/ ``I was thinking about how everyone was dying and maybe it's time to live.'' - Eels
Starting with XML
Hi, In my job I now need to transfer data between application using XML. As an absolute beginner in this field I'm asking you the very very basic of XML. As far as I know having leafed through debian documentation XML as a tagged language is a subset of SGML therefore: 1) What deb packages should I install to build and view XML documents? 2) Where can I find documentation both on the packages themselves and, above all, on XML? Ciao Vittorio
Re: Raid; mkraid /dev/md0
Frans == Frans Schreuder [EMAIL PROTECTED] writes: Frans Thanx for the reply. FYI: the raidtab file is /etc/raidtab (and Frans also /etc/raid/raidtab) The raidtab looks OK to me. What are the partitions on your disks? -- G. ``Iggy'' Geens - ICQ: #64109250 Home: [EMAIL PROTECTED] - Work: [EMAIL PROTECTED] WWW: http://users.pandora.be/guy.geens/ ``I was thinking about how everyone was dying and maybe it's time to live.'' - Eels
Re: [slightly OT] 486 50mhz 16ram 258mb HD
I have a 486 with 8MB RAM and I allocated 32MB swap. It runs fine (basically just ipmasq at the moment), but I'm looking into making it a diskless (X)term instead. I recommend at least 12MB or better 16MB for an X terminal. Remember that you do not have the luxeairy of swap. If you have enough mem, and a good network card, there is almost no speed loss (only with enormous 3D games, I guess). Greetz, Sebastiaan
Re: [slightly OT] 486 50mhz 16ram 258mb HD - Kernel Panic
On Sat, 16 Jun 2001, Brendon wrote: after inserting the rootdisk i receive the following error message: [MS-DOS FS Rel. 12, FAT 16,check=n,conv=b,uid=0,gid=0,umask=022,bmap] [me=0xa6,sc=340,#f=194,fs=44860,fl=101811,ds=19927266,de=61894,data=19931136,se= 52701,ts=-1458993024,ls=2013,rc=0,fc=4294967295] Transaction block size = 512 Kernel panic: VFS: Unable to mount root fs on 02:00 can't say i've ever seen the first part, the second i've always blamed on the presence of FAT32 partitions (that is, when i removed them i didnt get a kernel panic).. but this is on a HD without partitions. a problem with a BIOS setting perhaps? has anyone seen this before? Strange. The kernel boots up ok, right? Perhaps you should try to write the image on a different floppy. Greetz, Sebastiaan
NETSCAPE 6.0, 6.01 6.1 PROBLEM!!
I have the debain 2.2 instaled, and i try tu use any of the new versions from netscape, but I can use any plugins, neither the ones preinstaled. With about:plugins I get the correct directory /usr/local/netscape/plugins but I Only get the libnull plugin and if I make a manual instalation of anyone it doesn`t recognize it. Any idea??? Thank all you for your help Angel
Re: [slightly OT] 486 50mhz 16ram 258mb HD - Kernel Panic
On Sunday 17 June 2001 10:29, you wrote: On Sat, 16 Jun 2001, Brendon wrote: after inserting the rootdisk i receive the following error message: [MS-DOS FS Rel. 12, FAT 16,check=n,conv=b,uid=0,gid=0,umask=022,bmap] [me=0xa6,sc=340,#f=194,fs=44860,fl=101811,ds=19927266,de=61894,data=19931 136,se= 52701,ts=-1458993024,ls=2013,rc=0,fc=4294967295] Transaction block size = 512 Kernel panic: VFS: Unable to mount root fs on 02:00 can't say i've ever seen the first part, the second i've always blamed on the presence of FAT32 partitions (that is, when i removed them i didnt get a kernel panic).. but this is on a HD without partitions. a problem with a BIOS setting perhaps? has anyone seen this before? Strange. The kernel boots up ok, right? Perhaps you should try to write the image on a different floppy. different rescue and boot floppies solved the problem. i now have debian running on the machine and i'll be setting it up for ip masq tomorrow :) thanks for the help (but stick around, i'm bound to run into to trouble ;) groetjes/regards, Brendon
video card for dvd
dear deb-user i want to upgrade my video card for DVD playback with a tv out, with 32Mb or more i presume. however there is so much choice out there i can't see the wood for the trees. if anyone has had any success with their vid configuartion please tell me what card you have. i am not interested in games, just video playback quality and color. suggestions welcome. tom
Re: Creating Source Packages
Jason Ferguson [EMAIL PROTECTED] wrote: Heres the problem. They build and install fine. However, on the next apt-get dist-upgrade, the packages are overwritten with the standard ones! Edit debian/changelog and add an additional entry to the top, incrementing the version number by 0.0.1. The devscripts package contains a utility called debchange (or dch) which will help you get the format right. Then build and install the new package. When a real new version comes out, you'll get that, but until then your local packages will remain installed. I put export CFLAGS='-O2 -march=i686' into my .bash_profile, but the rules build seems to ignore it (hence me editing that script). Yes, debian/rules routinely sets CFLAGS itself. Packages are supposed to build the same way regardless of their environment. (By the way, the easiest way to build a package is 'dpkg-buildpackage -rfakeroot', or, again from the devscripts package, 'debuild'.) Cheers, -- Colin Watson [EMAIL PROTECTED]
Re: [slightly OT] 486 50mhz 16ram 258mb HD
Brendon [EMAIL PROTECTED] writes: or should i look for a single floppy solution (and if so which one, where do i look)? Have a look at http://www.fli4l.de My 8MB 486 is running fli4l routing to DSL. Its very easy to configure. Ciao! juh -- Weg mit den grünen Bremsklötzen! http://www.sudelbuch.de/2000/2517.html
UDMA66 doesn't work
Hi, I have a UDMA66 HDD and Board. I have enabled the options for using UDMA in the Kernel conf. Now the Kernel shows me that: hda: 87930864 sectors (45021 MB) w/2048KiB Cache, CHS=5473/255/63, UDMA(33) Why UDMA(33) what can i do to enable UDMA(66)? cheers, Raffaele -- Raffaele Sandrini [EMAIL PROTECTED] For encrypted Mail get my Public Key from search.keyserver.net ID is: 0xEC4950E9
Architecture
Hey, I don't know much. So I don't know what my architecture is. How do I find out what it is? Thanks. _ Get your FREE download of MSN Explorer at http://explorer.msn.com
MINA MYSKO LJUDPROBLEM.
Hej! För er som läser en del på den här listan kanske detta är tämligen bekant och lite tjatigt. Men jag har haft och har problem med mitt ljudstöd i Debian. Detta ter sig mycket under ligt. Moddar och mp3-or är ingta problem. Men när jag försker spela wav-filer och au-filer kommeer följande upp: Jag spelar upp filen gurka.wav med kommandot play: play gurka.wav playing gurka.wav Sound: DMA (output) timed out : IRQ/DRQ config error? Dettar är rysligt irriterande och inget jag kan lösa med den lilla hjärna jag innehar.' Är har någon som tror sig kunna hjälpa mig typ? Kan det vara så att det är fel i min konfiguration? Alltså måste jag börja kompilera om kärnan? Hur gör jag för att ändra bara ljudets inställningar? Använder make config och det är ju inget tervligt arbeta att trycka enter 50 gånger tills man kommer till ljudet. Om jag kör make manuconfig och väljer sound så kommer väl ändå de gamla inställningarna jag har nu att sparas? /Anders.
Re: Architecture
On Sun, Jun 17, 2001 at 11:44:38AM -, ¤ º §©Ø±±¥ º ¤ wrote: I don't know much. So I don't know what my architecture is. How do I find out what it is? if you don't know your architecture i guess you have an intel or amd cpu which makes it an i386 architecture. yours martin -- GnuPG 1024D/3E8DCCC0 30DC 1D28 1D79 32F5 5E67 3ABB 28EE B35A 3E8D CCC0 work: factline Krisper Fabro Harnoncourt OEG (www.factline.com)
php4-pgsql package
Hi, Anyone know what's happened to the php4-pgsql package in testing and unstable? [EMAIL PROTECTED]:~$ sudo apt-get install php4-pgsql Reading Package Lists... Done Building Dependency Tree... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: Sorry, but the following packages have unmet dependencies: php4-pgsql: Depends: php4 (= 4.0.3pl1-0potato1.1) but 3:4.0.5-2 is to be installed E: Sorry, broken packages
Re: Architecture
On Sun, 17 Jun 2001, ¤ º §©Ø±±¥ º ¤ wrote: Hey, I don't know much. So I don't know what my architecture is. How do I find out what it is? Thanks. Try 'cat /proc/cpuinfo'. First of my seven lines are: processor : 0 vendor_id : GenuineIntel cpu family : 5 model : 4 model name : Pentium MMX stepping: 3 cpu MHz : 199.684 So I have an Intel Pentium MMX running at 200MHz (this is an i386 architecture). Greetz, Sebastiaan
Re: Raid; mkraid /dev/md0
Primary partition only one; fd filetype (linux raid auto). For each disk.(hdb; hdc).They are identical disks but clusters/heads/sectors differ?? Maybe it's the kernel? It's an out of the box kernel(2.2.17). Raidtools2 and kernel-patch-2.2.10-raid_2.2.10-3.deb - Original Message - From: Guy Geens [EMAIL PROTECTED] To: debian-user@lists.debian.org Sent: Sunday, June 17, 2001 8:58 AM Subject: Re: Raid; mkraid /dev/md0 Frans == Frans Schreuder [EMAIL PROTECTED] writes: Frans Thanx for the reply. FYI: the raidtab file is /etc/raidtab (and Frans also /etc/raid/raidtab) The raidtab looks OK to me. What are the partitions on your disks? -- G. ``Iggy'' Geens - ICQ: #64109250 Home: [EMAIL PROTECTED] - Work: [EMAIL PROTECTED] WWW: http://users.pandora.be/guy.geens/ ``I was thinking about how everyone was dying and maybe it's time to live.'' - Eels -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Architecture
On Sun, 17 Jun 2001, ¤ º §©Ø±±¥ º ¤ wrote: hello again, i don't have linux installed yet. that is why i wanted to find out what my architecture was. the system that i am planning to install on is a 133mhz. so i am assuming that this is an i386 architecture. another question i have is what i am supposed to download. i am going through the australian server. http://ftp.au.debian.org/pub/debian/dists/stable/main/disks-i386/current/ that is the url that i am currently at. am i in the right directory? if so, what do i do from here to download the files needed for installation? Your help is much appreciated. Scott. Every information you need is in the README file and in the doc/ directory. But to start you up: You need to download the images from images-1.44 and write it do floppy's. You can use the programs in the directory dosutils/. The least you need are: rescue.bin - boot with this floppy root.bin- insert this floppy when asked: this is the installation program Then you can choose: you can download drivers# and base2_2# and write them to floppys. This is the easiest method if you are a newbie to Linux. Alternatively, you can download the two gzipped archives, but you must be able to play with the installation program if you want to do this. For example, if you are on a lan with connection to the internet you must be able to configure your network card and download the stuff. If you burn the files on a cdrom, you must know how to mount the cd. After the first stage install, your computer reboots and starts Linux, together with the secound stage install. During this install you can set up a ppp connection to your ISP or use the lan to retreive the rest of your Linux installation. Hope this helps, Sebastiaan
Windows-like crashes!
Hi, I have been successfully using Debian Woody for about 8 months now and I am proud to say that it's not my default boot. Recently I've been trying to get XMPS working and after trying to watch a DivX with crappy quality, I decided to upgrade to the NVidia drivers from their site. This went off without a hitch and now I get the nice NVidia logo when starting Enlightenment. Last night, I decided to recompile my kernel without SMP support (I saw that I had it compiled in and that it would run faster without it. After running make xconfig, I ran make dep modules modules_install. This resulted in an error at the SMP part of the compilation at which point I realized that I have some screwed up kernel source 'cause this happens every time I try to compile without SMP support. Oh well, I said, and went to bed. Today I turned on my machine and the X-Server wouldn't connect (text login vs. normal gdm). I thought this was weird so I tryed `startx'. This also did not work and after a few hours of messing around with different things, I recompiled my Nvidia drivers and now have working gdm again. HOWEVER, whenever I try to play an MP3 in XMMS or view a movie in XMPS, the computer locks up completely! I mean, we're talking Windows-like jamming (but without the mouse moving) without a Ctrl-Alt-Del response or Ctrl-Alt-Backspace either. I have to hard reset my computer and then I get the usual fsck stuff which says there were detached inodes (I think ... or something like that) which get fixed (after entering the root password) and then the cycle repeats itself. Any ideas would be greatly appreciated! My machine: Celeron 466 224 MB RAM 8.4 GB Fujitsu (hda) 40 GB Maxtor (hdb - hdb3 = /) Diamond Viper V770 (TNT2) Debian Woody 2.4.2 Kernel XFree86 4.0.2 (with Nvidia server 1.0? from last week) Thanks very much in advance, Andrew -- Andrew Overholt EngSci 0T3 Junior Bnad Leedur of the Lady Godiva Memorial Bnad ERTW
Re: UDMA66 doesn't work
I have a UDMA66 HDD and Board. I have enabled the options for using UDMA in the Kernel conf. Now the Kernel shows me that: hda: 87930864 sectors (45021 MB) w/2048KiB Cache, CHS=5473/255/63, UDMA(33) Why UDMA(33) what can i do to enable UDMA(66)? Dear sir , Please try passing the kernel parameters idebus=66 and ide0=ata66 in the proper way through the boot loader. -Jeffrin GNU gives free software. GOD gives free eternal life.
Re: Windows-like crashes!
Thus spake Andrew Overholt on Sun, Jun 17, 2001 at 09:43:02AM -0400: Hi, Hi. ... I decided to upgrade to the NVidia drivers from their site. This went off without a hitch and now I get the nice NVidia logo when starting Enlightenment. Yeah, so do I. I can't figure how to turn it off. ( best guess: can't) Last night, I decided to recompile my kernel without SMP support (I saw that I had it compiled in and that it would run faster without it. After running make xconfig, I ran make dep modules modules_install. This resulted in an error at the SMP part of the compilation at which point I realized that I have some screwed up kernel source 'cause this happens every time I try to compile without SMP support. sorry, no idea there. Oh well, I said, and went to bed. Today I turned on my machine and the X-Server wouldn't connect (text login vs. normal gdm). I thought this was weird so I tryed `startx'. This also did not work and after a few hours of messing around with different things, I recompiled my Nvidia drivers and now have working gdm again. For some reason, make modules_install removes the Nvidia driver from /lib/modules/2.XX.YY/kernel/video/NVdriver So move the NVdriver module to /lib/modules/2.XX.YY/nvidia/ or something. ( and modify INSTALLDIR in the Nvidia_kernel Makefile if you want) HOWEVER, whenever I try to play an MP3 in XMMS or view a movie in XMPS, the computer locks up completely! I mean, we're talking Windows-like jamming (but without the mouse moving) without a Ctrl-Alt-Del response or Ctrl-Alt-Backspace either. I have to hard reset my computer and then I get the usual fsck stuff which says there were detached inodes (I think ... or something like that) which get fixed (after entering the root password) and then the cycle repeats itself. Try aviplay instead. I have no problem with it. Any ideas would be greatly appreciated! What about sound ? It could also cause problems (including those freezes) What sound card are you using, with what kind of driver ? Bye, Romain
Re: Configuring X Server during Install
On Sun, Jun 17, 2001 at 04:29:32PM +1000, [EMAIL PROTECTED] wrote: :I have been trying to install Debian on my Toshiba 2180CDT laptop. :But I just can't get X server to work. I'm not familiar with your hardware but you might look up info on your laptop at http://www.linux.org/hardware/laptop.html :Also how do I shut down Debian from the Command Line? [EMAIL PROTECTED] halt to reboot use reboot instead of halt -Jon
Re: UDMA66 doesn't work
You might want to enable the kernel options CONFIG_BLK_DEV_IDEDISK CONFIG_BLK_DEV_IDEPCI CONFIG_IDEPCI_SHARE_IRQ CONFIG_BLK_DEV_IDEDMA_PCI CONFIG_IDEDMA_PCI_AUTO CONFIG_BLK_DEV_IDEDMA Then have a look at your motherboard manual to figure out which specific IDE controller chipset you have, and enable special support for that. There is support for most chipsets, and it usually auto detects UDMA support if you have the right chipset support compiled. Make sure you are using an 80w IDE cable as well, you need that for UDMA(66). You might need the append=idebus=66 ide0=ata66 line in you lilo.conf (assuming you use lilo and your hdd is on ide0) if it doesn't auto detect. Hope that helps. Aq. On 17 Jun 2001 12:35:48 +0200, Raffaele Sandrini wrote: Hi, I have a UDMA66 HDD and Board. I have enabled the options for using UDMA in the Kernel conf. Now the Kernel shows me that: hda: 87930864 sectors (45021 MB) w/2048KiB Cache, CHS=5473/255/63, UDMA(33) Why UDMA(33) what can i do to enable UDMA(66)? cheers, Raffaele -- Raffaele Sandrini [EMAIL PROTECTED] For encrypted Mail get my Public Key from search.keyserver.net ID is: 0xEC4950E9 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- --- e-mail: aquila at hypox dot org website: http://aquila.hypox.org geek code: GCS d- s+:--- a-- C ULS++ P+++ L+++$ E--- W++ N+ o? K? w O- M-- V-- PS---@ PE--@ Y? PGP- t 5 X- R tv+ b+ DI-- D+ G++ e(++) h! r* y ---
installing Debian with win95
Hi, i wan't to install Debian2.2 on a PC running win95 and i wan't to be able to start both operating systems can someone please tell me how to do it ?
Re: installing Debian with win95
Nagib Abi Fadel wrote: Hi, i wan't to install Debian2.2 on a PC running win95 and i wan't to be able to start both operating systems can someone please tell me how to do it ? You either install lilo on the debianpartition or loadlin on the win95partition. I recommend lilo. Then you add to lilo.conf: other=/dev/[partition you have windows on] label=win And then you can boot windows from your lilo. -- IRL Jonas bazz Egidius IRC [EMAIL PROTECTED] CEL +46709841071 WEB http://bazz.nu ICQ 41245779 POP[EMAIL PROTECTED] JOB gronaverket.se VIM Yes, ofcourse!
Re: (Potato) problems with PHP4 package /apache module
[EMAIL PROTECTED] wrote: Hello everyone. I think maybe this is not the appropiate place to post this; in that case, I'm sorry. Now the question: I have instaled apache 1.3.19 in potato and now I add php4 as a module, and the pgsql extension for php. Dselect and installs = ok. apache + php = ok, but pgsql extension is not loaded, no pgsql function work on the server. The /etc/php4/apache/php.ini file was edited to load the extension file (pgsql.so) and the directive to the path of the lib file is ok too. Any ideas? Can somebody point me in the direction to correct this? Thank you very much. Fernando Do you have postgresql installed and all of the necessary dependencies met?
Re: Windows-like crashes!
On Sun, 17 Jun 2001, Romain Lerallut wrote: HOWEVER, whenever I try to play an MP3 in XMMS or view a movie in XMPS, the computer locks up completely! I mean, we're talking Windows-like jamming (but without the mouse moving) without a Ctrl-Alt-Del response or Ctrl-Alt-Backspace either. I have to hard reset my computer and then I get the usual fsck stuff which says there were detached inodes (I think ... or something like that) which get fixed (after entering the root password) and then the cycle repeats itself. Try aviplay instead. I have no problem with it. What about sound ? It could also cause problems (including those freezes) What sound card are you using, with what kind of driver ? I'm using an SB Live with the kernel module emu10k1. It's listed in my /etc/modules. This never happenecd before (ie. the crasing - usually I'd just get errors like Cannot access /dev/dsp or something like that) and mpg123 does it too (the crashing)! I find the general performance of my system is suffering as well from this recent mysterious problem. Thanks again, Andrew -- Andrew Overholt EngSci 0T3 Junior Bnad Leedur of the Lady Godiva Memorial Bnad ERTW
Re: UDMA66 doesn't work
On Sunday 17 June 2001 15:58, Aquila wrote: You might want to enable the kernel options CONFIG_BLK_DEV_IDEDISK CONFIG_BLK_DEV_IDEPCI CONFIG_IDEPCI_SHARE_IRQ CONFIG_BLK_DEV_IDEDMA_PCI CONFIG_IDEDMA_PCI_AUTO CONFIG_BLK_DEV_IDEDMA Then have a look at your motherboard manual to figure out which specific IDE controller chipset you have, and enable special support for that. There is support for most chipsets, and it usually auto detects UDMA support if you have the right chipset support compiled. Make sure you are using an 80w IDE cable as well, you need that for UDMA(66). You might need the append=idebus=66 ide0=ata66 line in you lilo.conf (assuming you use lilo and your hdd is on ide0) if it doesn't auto detect. Hope that helps. Aq. I have a via chipset and that is supportet and i have compiled it in... BUT what exactly is a 80w cable how can i recongnize it? I have a normal IDE connector cable with 32 pins could you give me a hint? cheers, Raffaele -- Raffaele Sandrini [EMAIL PROTECTED] For encrypted Mail get my Public Key from search.keyserver.net ID is: 0xEC4950E9
xmms problems
Ello does somebody know why xmms is not working? when i run it, it says: Segmentation Fault You've propably found a bug, please submit it bla bla ;] i'm using debian unstable and sndconfig doesn't detect my sb 16 vibra... but when i echo sb /etc/modules it works... ...:: [ pReJkEr ] ::... ...:: [ [EMAIL PROTECTED] ] ::... ...:: [ http://www.aaocg.prv.pl ] ::...
Re: Windows-like crashes!
hi maybe it is due to nvidia drivers. they are notoriously buggy. there are a lot of complains regarding it causing x-lockups, and they never worked for me. for example, while running X, if i switch to console, and then back to X, it causes a lockup. you may try switching back to nv driver (provided by XFree86) instead of nvidia driver, and see if the problem exists. if problem goes away by switching back to nv, start bugging NVidia for buggy drivers. On Sun, 17 Jun 2001, Andrew Overholt wrote: Hi, I have been successfully using Debian Woody for about 8 months now and I am proud to say that it's not my default boot. Recently I've been trying to get XMPS working and after trying to watch a DivX with crappy quality, I decided to upgrade to the NVidia drivers from their site. This went off without a hitch and now I get the nice NVidia logo when starting Enlightenment. Last night, I decided to recompile my kernel without SMP support (I saw that I had it compiled in and that it would run faster without it. After running make xconfig, I ran make dep modules modules_install. This resulted in an error at the SMP part of the compilation at which point I realized that I have some screwed up kernel source 'cause this happens every time I try to compile without SMP support. Oh well, I said, and went to bed. Today I turned on my machine and the X-Server wouldn't connect (text login vs. normal gdm). I thought this was weird so I tryed `startx'. This also did not work and after a few hours of messing around with different things, I recompiled my Nvidia drivers and now have working gdm again. HOWEVER, whenever I try to play an MP3 in XMMS or view a movie in XMPS, the computer locks up completely! I mean, we're talking Windows-like jamming (but without the mouse moving) without a Ctrl-Alt-Del response or Ctrl-Alt-Backspace either. I have to hard reset my computer and then I get the usual fsck stuff which says there were detached inodes (I think ... or something like that) which get fixed (after entering the root password) and then the cycle repeats itself. Any ideas would be greatly appreciated! My machine: Celeron 466 224 MB RAM 8.4 GB Fujitsu (hda) 40 GB Maxtor (hdb - hdb3 = /) Diamond Viper V770 (TNT2) Debian Woody 2.4.2 Kernel XFree86 4.0.2 (with Nvidia server 1.0? from last week) Thanks very much in advance, Andrew -- Andrew Overholt EngSci 0T3 Junior Bnad Leedur of the Lady Godiva Memorial Bnad ERTW
Re: UDMA66 doesn't work
On Sunday 17 June 2001 15:58, Aquila wrote: You might want to enable the kernel options CONFIG_BLK_DEV_IDEDISK CONFIG_BLK_DEV_IDEPCI CONFIG_IDEPCI_SHARE_IRQ CONFIG_BLK_DEV_IDEDMA_PCI CONFIG_IDEDMA_PCI_AUTO CONFIG_BLK_DEV_IDEDMA Then have a look at your motherboard manual to figure out which specific IDE controller chipset you have, and enable special support for that. There is support for most chipsets, and it usually auto detects UDMA support if you have the right chipset support compiled. Make sure you are using an 80w IDE cable as well, you need that for UDMA(66). You might need the append=idebus=66 ide0=ata66 line in you lilo.conf (assuming you use lilo and your hdd is on ide0) if it doesn't auto detect. Hope that helps. Aq. Another note: When i start my BIOS says: Primary IDE: No 80 consuctor cable installed. I guess thats it, isn't it... do i have to buy a seperate one? cheers, Raffaele -- Raffaele Sandrini [EMAIL PROTECTED] For encrypted Mail get my Public Key from search.keyserver.net ID is: 0xEC4950E9
Re: UDMA66 doesn't work
Yeh you need a special IDE cable, though if your motherboard supports UDMA mode 4 or 5 it *should* already come with one (or more). it's got finer cables than a normal 40w IDE cables, and usually colour coded black, gray, blue for IDE master, slave, motherboard. On 17 Jun 2001 17:00:57 +0200, Raffaele Sandrini wrote: On Sunday 17 June 2001 15:58, Aquila wrote: You might want to enable the kernel options CONFIG_BLK_DEV_IDEDISK CONFIG_BLK_DEV_IDEPCI CONFIG_IDEPCI_SHARE_IRQ CONFIG_BLK_DEV_IDEDMA_PCI CONFIG_IDEDMA_PCI_AUTO CONFIG_BLK_DEV_IDEDMA Then have a look at your motherboard manual to figure out which specific IDE controller chipset you have, and enable special support for that. There is support for most chipsets, and it usually auto detects UDMA support if you have the right chipset support compiled. Make sure you are using an 80w IDE cable as well, you need that for UDMA(66). You might need the append=idebus=66 ide0=ata66 line in you lilo.conf (assuming you use lilo and your hdd is on ide0) if it doesn't auto detect. Hope that helps. Aq. Another note: When i start my BIOS says: Primary IDE: No 80 consuctor cable installed. I guess thats it, isn't it... do i have to buy a seperate one? cheers, Raffaele -- Raffaele Sandrini [EMAIL PROTECTED] For encrypted Mail get my Public Key from search.keyserver.net ID is: 0xEC4950E9 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- --- e-mail: aquila at hypox dot org website: http://aquila.hypox.org geek code: GCS d- s+:--- a-- C ULS++ P+++ L+++$ E--- W++ N+ o? K? w O- M-- V-- PS---@ PE--@ Y? PGP- t 5 X- R tv+ b+ DI-- D+ G++ e(++) h! r* y ---
Re: Raid; mkraid /dev/md0
Frans == Frans Schreuder [EMAIL PROTECTED] writes: Frans Primary partition only one; fd filetype (linux raid auto). For Frans each disk.(hdb; hdc).They are identical disks but Frans clusters/heads/sectors differ?? The CHS figures shouldn't matter, as long as fdisk reports the same size for both. (And even if the size is different, mkraid should just ignore the surplus on one drive. Frans Maybe it's the kernel? It's an out of the box Frans kernel(2.2.17). Raidtools2 and Frans kernel-patch-2.2.10-raid_2.2.10-3.deb There appears to be a newer patch, kernel-patch-2.2.19-raid (in testing/unstable, but that shouldn't matter). You could try that one. -- G. ``Iggy'' Geens - ICQ: #64109250 Home: [EMAIL PROTECTED] - Work: [EMAIL PROTECTED] WWW: http://users.pandora.be/guy.geens/ ``I was thinking about how everyone was dying and maybe it's time to live.'' - Eels
Re: UDMA66 doesn't work
On Sunday 17 June 2001 17:07, Aquila wrote: Yeh you need a special IDE cable, though if your motherboard supports UDMA mode 4 or 5 it *should* already come with one (or more). it's got finer cables than a normal 40w IDE cables, and usually colour coded black, gray, blue for IDE master, slave, motherboard. You know, i have bought that computer part for part i mean, that i have got a ide cable with it... but i remember that i used it to connect my DVDROM and my writer to ide1 so i took an olther cable for the HDD. I didn't know that i have to use a special one... :-)) Thanks alot, Raffaele -- Raffaele Sandrini [EMAIL PROTECTED] For encrypted Mail get my Public Key from search.keyserver.net ID is: 0xEC4950E9
[no subject]
Hi, I have small question. There are currently 2 versions of kernel 2.2.19 available in the packages, one package with version 2.2.19-2 and one with 2.2.19pre17, but which one is the newest? Thnx, Marijn.
deleting GPG UIDs
hey, i have my GPG key uploaded to the keyservers. unfortunately, i somehow messed up, and now i have three UIDs associated with it: fishbowl:~ gpg --list-keys A8FA196E pub 1024D/A8FA196E 2001-05-07 MaD dUCK [EMAIL PROTECTED] uidMartin F. Krafft [EMAIL PROTECTED] uidMartin F. Krafft (MaD dUCK) ... the last one is unecessary and i would like to delete it... i can easily do: fishbowl:~ gpg --yes --edit-key A8FA196E uid 3 deluid save pub 1024D/A8FA196E created: 2001-05-07 expires: never trust: f/u sub 2048g/E93FAECE created: 2001-05-07 expires: never (1) Martin F. Krafft [EMAIL PROTECTED] (2). MaD dUCK [EMAIL PROTECTED] and even upload that key with gpg --send-key, but the keyserver seems to merge the key rather than to overwrite it. there is no option to revoke a UID and i can't revoke the entire key. how can i delete the UID on the keyserver's copy of the key such that gpg --recv-keys doesn't restore the third UID? martin; (greetings from the heart of the sun.) \ echo mailto: !#^.*|tr * mailto:; [EMAIL PROTECTED] -- 3 kinds of people: those who can count those who can't.
Re: deleting GPG UIDs
msg.pgp Description: PGP message
Re: Init not behaving the way man says it does?
In article [EMAIL PROTECTED], Tom Gilbert [EMAIL PROTECTED] wrote: in february of 2000 (when the manpage for init was last tweaked, from what i can tell) init may have operated they way it's describe there. but the way it works on debian potato is that it calls a script (/etc/init.d/rc) that calls scripts (/etc/rc*.d/[KS]*) with certain arguments. they're spozed to be the ones to do the job -- and this is a nice, new, modular layout. No, the init manpage doesn't describe the Debian, Redhat or Suse init system at all. It describes what /sbin/init does - that's all. You have to combine that with /usr/share/doc/sysvinit/README.runlevels.gz, which does describe how the Debian /etc/rc?.d/ stuff works. you've discovered the biggest achilles' heel of the *nix world: the documentation was probably right at one point, but... to determine that point, check the last-modified date and keep exploring if you need to... No, you're reading things in the init manual page that aren't there. Mike.
Re: deleting GPG UIDs
also sprach Henrique de Moraes Holschuh (on Sun, 17 Jun 2001 12:55:04PM -0300): You cannot. That would allow for very serious attacks against the keyserver database by third-parties, so it's not supported. that makes sense. and i remember reading about this. You CAN revoke the UID, though. That will not delete it, but at least people should avoid using it because it is marked as revoked. how? when i do --edit-key and then select the UID with the 'uid' command, all the options i have (as output by 'help') are: quit quit this menu save save and quit help show this help fprshow fingerprint list list key and user IDs uidselect user ID N keyselect secondary key N check list signatures sign sign the key lsign sign the key locally deluid delete user ID delkey delete a secondary key delsig delete signatures pref list preferences showpref list preferences trust change the ownertrust revsig revoke signatures disabledisable a key enable enable a key and revsig produces the following output, but no result: You have signed these user IDs: Martin F. Krafft [EMAIL PROTECTED] MaD dUCK [EMAIL PROTECTED] Martin F. Krafft (MaD dUCK) [EMAIL PROTECTED] sorry if i don't understand and have to ask trivial questions... but while we're at it, could you tell me how to revoke a whole key on the keyserver? martin; (greetings from the heart of the sun.) \ echo mailto: !#^.*|tr * mailto:; [EMAIL PROTECTED] -- first snow, then silence. this thousand dollar screen dies so beautifully.
XMMS: root can / user can not listen Audio CDs
Hello, just installed Debian/GNU Linux 2.2r2 and now installed X, SAWMILL, TKMIXER and XMMS from the official CDs. When I start X as root and start then XMMS I am able to to listen to AudioCDs (also the tracks are not listed in the PLAYLIST window). When I do the same as user, I may start XMMS but when I try to add the content of /cdrom within the +FILE Dialogue (of PLAYLIST) I don't see files like TRACK... in the right part of the window opened by +FILE as I see them when doing the same as root. The CDROM is mounted with the following properties in fstab: /dev/cdrom /cdrom iso9660 defaults,noauto,user,ro 0 0 [Perhaps things went wrong because I had installed and deinstalled (using dselect) GRIP before I installed XMMS and as I understood to use GRIP one has to be root] Thanks in advance! Thomas
sis 6326
Has anybody succeded to configure the sis 6326 video card using xfree86config on Debian 2.2 (potato)? I need help!!! I think I have to upgrade xfree86, so, does anybody have the newest sources.list?
Re: telnet
I'm trying to setup a telnet daemon on a box running stable (I know, and I want to use ssh but the software we're using only knows about telnet. It's a private lan too so I'm not too concerned.). I've set everything up so inetd should spawn the telnet daemon but when I try to connect I get this error message: [EMAIL PROTECTED]:~$ telnet pig1 Trying 172.16.1.153... Connected to pig1.seranoa.com. Escape character is '^]'. telnetd: getpty: No such file or directory . Connection closed by foreign host. [EMAIL PROTECTED]:~$ Dear sir , Telnetd operates by allocating a pseudo-terminal device to the client's request.Please check with the pty devices if possible. This may be the problem. -Jeffrin. GNU gives free software. GOD gives free eternal life.
packages kept back
Running unstable. Executing apt-get upgrade, I get: The following packages have been kept back ddd grace lib-xt-java libldap2 libxml-generator-perl python-numeric python-numeric-tutorial task-sgml task-tex wmaker 0 packages upgraded, 0 newly installed, 0 to remove and 10 not upgraded. Why are those packages kept back? Is it because upgrading them would break something else or what? And is this normal or a sign of something misconfigured on my system? Thanks in advance, Dan
Re: deleting GPG UIDs
msg.pgp Description: PGP message
Re: installing Debian with win95
At 17:01 17-06-2001 +0300, you wrote: \ || || Hi, i wan't to install Debian2.2 on a PC running win95 and i wan't to be || able || to start both operating systems can someone please tell me how to do it ? || || || -- || To UNSUBSCRIBE, email to [EMAIL PROTECTED] || with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] || || / Having win98 installed, I did: - repartition my harddisk to have both the c: partition and an ext2 partition for linux. - installed linux with lilo as bootloader - changed the file /etc/lilo.conf (there's a commented out part that allows you to boot another system, like windows, you just have to know the linux name for the partition it is on. For me that's /dev/hda1 (i.e. the first (1) partition on the master harddisk on the first IDE controller (a), the seconday master is called c) - run lilo to activate the changes in the lilo.conf I have attached my lilo.conf. It's configured to start windows automatically after a 2 seconds timeout. My harddisk (according to linux) has the following structure: hda: hda1 hda2 hda5 ... hda9 hda3 hda4 In my case the hda1-4 numbering is chronological (creation time), so is the hda5-9. hda1 is my primary windows partition hda2 is an extended windows partition consisting of logical partitions 5-9. hda3 is my linux ext2 partition hda4 is the linux swap partition Hope this helps. Regards, André. # /etc/lilo.conf - See: `lilo(8)' and `lilo.conf(5)', # --- `install-mbr(8)', `/usr/share/doc/lilo/', # and `/usr/share/doc/mbr/'. # +---+ # |!! Reminder !! | # | | # | Don't forget to run `lilo' after you make changes to this | # | conffile, `/boot/bootmess.txt', or install a new kernel. The | # | computer will most likely fail to boot if a kernel-image | # | post-install script or you don't remember to run `lilo'. | # | | # +---+ # Support LBA for large hard disks. # lba32 #specify reboot method: warm, bios # Specifies the boot device. This is where Lilo installs its boot # block. It can be either a partition, or the raw device, in which # case it installs in the MBR, and will overwrite the current MBR. # boot=/dev/hda # Specifies the device that should be mounted as root. (`/') # root=/dev/hda3 # Enable map compaction: # Tries to merge read requests for adjacent sectors into a single # read request. This drastically reduces load time and keeps the # map smaller. Using `compact' is especially recommended when # booting from a floppy disk. It is disabled here by default # because it doesn't always work. # # compact # Installs the specified file as the new boot sector # install=/boot/boot.b # Specifies the location of the map file # map=/boot/map # You can set a password here, and uncomment the `restricted' lines # in the image definitions below to make it so that a password must # be typed to boot anything but a default configuration. If a # command line is given, other than one specified by an `append' # statement in `lilo.conf', the password will be required, but a # standard default boot will not require one. # # This will, for instance, prevent anyone with access to the # console from booting with something like `Linux init=/bin/sh', # and thus becoming `root' without proper authorization. # # Note that if you really need this type of security, you will # likely also want to use `install-mbr' to reconfigure the MBR # program, as well as set up your BIOS to disallow booting from # removable disk or CD-ROM, then put a password on getting into the # BIOS configuration as well. Please RTFM `install-mbr(8)'. # # password=tatercounter2000 # Specifies the number of deciseconds (0.1 seconds) LILO should # wait before booting the first image. # delay=20 # You can put a customized boot message up if you like. If you use # `prompt', and this computer may need to reboot unattended, you # must specify a `timeout', or it will sit there forever waiting # for a keypress. `single-key' goes with the `alias' lines in the # `image' configurations below. eg: You can press `1' to boot # `Linux', `2' to boot `LinuxOLD', if you uncomment the `alias'. # # message=/boot/bootmess.txt # prompt # single-key # delay=100 # timeout=100 # Specifies the VGA text mode at boot time. (normal, extended, ask, mode) # # vga=ask # vga=9 # vga=normal # Kernel command line options that apply to all installed images go # here. See: The `boot-prompt-HOWO' and `kernel-parameters.txt' in # the Linux kernel `Documentation' directory. # # append= # Boot up Linux by default. # default=[W]indows image=/vmlinuz label = Generic Kernel vga = 1 read-only
Re: Windows-like crashes!
Thus spake Andrew Overholt on Sun, Jun 17, 2001 at 10:37:38AM -0400: On Sun, 17 Jun 2001, Romain Lerallut wrote: HOWEVER, whenever I try to play an MP3 in XMMS or view a movie in XMPS, the computer locks up completely! I mean, we're talking Windows-like jamming (but without the mouse moving) without a Ctrl-Alt-Del response or Ctrl-Alt-Backspace either. I have to hard reset my computer and then I get the usual fsck stuff which says there were detached inodes (I think ... or something like that) which get fixed (after entering the root password) and then the cycle repeats itself. Try aviplay instead. I have no problem with it. What about sound ? It could also cause problems (including those freezes) What sound card are you using, with what kind of driver ? I'm using an SB Live with the kernel module emu10k1. It's listed in my /etc/modules. This never happenecd before (ie. the crasing - usually I'd just get errors like Cannot access /dev/dsp or something like that) and mpg123 does it too (the crashing)! OK, this is good. I have an SB Live too and it works very well with the kernel module. ( I tried Alsa but the sound was crappy) The cannot access /dev/dsp *could* possibly be caused by an application using /dev/dsp and bypassing any sound daemon ( such as arts or esd), thus blocking any other app from using it too. I use aviplay, xmms and mpg123 all three (at the same time sometimes :) with esd and I don't have any problem at all. I also used the avi plugin for xmms. However I've never managed to get a decent result from xmps, so I don't use it. I don't have to complain *too much* about the stability of Nvidia's 1.0-1251 drivers. Except they aren't opensource, which is a PITA enough... I find the general performance of my system is suffering as well from this recent mysterious problem. Try to pinpoint which app or driver is likely to cause crashes. My system is running very smoothly with the apps I mentioned earlier... Thanks again, Andrew Good luck. Romain -- Don't talk to me about disclaimers! I invented disclaimers! -- The Censored Hacker