Le 02/03/2012 06:37, Olivier Pavilla a écrit :
Bonjour.
Bonjour
Mon serveur est sous debian squeeze où un postfix tourne cahin cahan,
harrassé qu'il est par les chinois, les ukrainiens, les roumains, etc.
Je souhaiterais savoir si il existe une RBL de hostname pour les
restrictions smtp? Ou
Le 02/03/2012 06:37, Olivier Pavilla a écrit :
Bonjour.
Mon serveur est sous debian squeeze où un postfix tourne cahin cahan,
harrassé qu'il est par les chinois, les ukrainiens, les roumains, etc.
Dans la lutte contre le spam il est bon d'utiliser plusieurs outils
qui ne bloquent pas de façon
Le 01/03/2012 20:19, Stephane Bortzmeyer a écrit :
On Thu, Mar 01, 2012 at 06:50:13PM +0100,
Mourad Jaberm...@nativobject.net wrote
a message of 23 lines which said:
J'ai un serveur de mail configuré avec postfix qui gère un autre
domaine et je me demandai s'il est possible de l'utiliser
Le Thu, 01 Mar 2012 21:10:01 +0100, Frédéric Marécaille a écrit :
Effectivement en me rendant sur l'adresse des backports, je vois bien
que le fichier release est expiré depuis le 29.02.2012 et un
InRelease prend le relais apparemment.
Comment indiquer ce fichier dans le sources.list? où
Le 02/03/2012 10:56, jacques a écrit :
Le 02/03/2012 06:37, Olivier Pavilla a écrit :
Bonjour.
Mon serveur est sous debian squeeze où un postfix tourne cahin cahan,
harrassé qu'il est par les chinois, les ukrainiens, les roumains, etc.
Dans la lutte contre le spam il est bon d'utiliser
Le 02/03/2012 11:08, Mourad Jaber a écrit :
Postgrey fait du bon travail en éliminant les 'one shot' tentés par
laplupart des spammeurs.
C'est effectivement une bonne solution passive.
Elle est active puisque elle met à jour elle même la liste des
bannis mais d'accord avec passive car
Apparemment, le problème est résolu :
http://backports.debian.org/debian-backports/dists/squeeze-backports/
Le fichier Release est synchronisé à présent
Le Thu, 01 Mar 2012 21:10:01 +0100, Frédéric Marécaille a écrit :
Effectivement en me rendant sur l'adresse des backports, je vois
On Fri, Mar 02, 2012 at 10:56:12AM CET, jacques jacq...@lavignotte.org said:
Le 02/03/2012 06:37, Olivier Pavilla a écrit :
Bonjour.
Mon serveur est sous debian squeeze où un postfix tourne cahin cahan,
harrassé qu'il est par les chinois, les ukrainiens, les roumains, etc.
Dans la lutte
Le 02/03/2012 11:41, jacques a écrit :
Le 02/03/2012 11:08, Mourad Jaber a écrit :
Postgrey fait du bon travail en éliminant les 'one shot' tentés par
laplupart des spammeurs.
C'est effectivement une bonne solution passive.
Elle est active puisque elle met à jour elle même la liste des
bonjour a tous,
Dans un script lisant un fichier (en l'occurrence SQL mais on s'en
fout) j'aimerai préserver les \ (backslash) lors du traitement.
La chaine :
salut l'gars
devient en SQL :
'salut l\'gars'
Mais echo de veux rien entendre et modifie systématiquement ma belle
On Fri, 02 Mar 2012 18:37:35 +0100
Patrick CAO HUU THIEN patrick.cao_huu_th...@upmc.fr wrote:
Ou est mon erreur ?
Dans le fait d'utiliser \ qui n'est pas un standard SQL.
Il faut soit doubler la quote, soit faire un escape de la string
(E'string' dans postgresql).
--
Ignorance is the
Ou est mon erreur ?
Dans le fait d'utiliser \ qui n'est pas un standard SQL.
Il faut soit doubler la quote, soit faire un escape de la string
(E'string' dans postgresql).
Le problème est que je dois justement CE fichier (généré par
mysqldump) pour faire mon traitement.
J'aimerais
On Fri, 02 Mar 2012 19:58:38 +0100
Patrick CAO HUU THIEN patrick.cao_huu_th...@upmc.fr wrote:
Ou est mon erreur ?
Dans le fait d'utiliser \ qui n'est pas un standard SQL.
Il faut soit doubler la quote, soit faire un escape de la string
(E'string' dans postgresql).
Le
Bonjour,
Je cherche désesperement le moyen d'avoir 4 bureaux
virtuels dans mon Gnome 2.
Un clic droit sur sélecteur espace de
travail dans la barre des tâches, préférences, ne me donne pas de
réglages pour le nombre de bureaux virtuels ...
Savez vous comment
faire ?
D'avance merci.
Bonjour,
Bonjour,
Je cherche désesperement le moyen d'avoir 4 bureaux virtuels dans mon
Gnome 2.
Un clic droit sur sélecteur espace de travail dans la barre des
tâches, préférences, ne me donne pas de réglages pour le nombre de
bureaux virtuels ...
Savez vous comment faire ?
Si si, il
Rilis laporan debconf 11
-- Forwarded message --
From: Gunnar Wolf gw...@gwolf.org
Date: Thu, Mar 1, 2012 at 7:43 AM
Subject: [Debconf-discuss] Final Report for DebConf 11 available!
To: debconf-disc...@lists.debconf.org
Hi all,
After quite a bit of work, we have done it! I
Realmente ahora me planteo si es necesario todo este trabajo en una
máquina que está en producción ya. La historia es que esta máquina
tiene un proxy-cache instalado y en uno los repasos a la documentación
de squid he visto que se recomienda la partición de cache formateada
en raiserfs y yo tengo
Buenas.
Necesito instalar un gestor de incidencias (para Help Desk) gratuito para
las diversas peticiones de los usuarios de la empresa. Sobre Debian, por
supuesto.
He oído hablar de Hesk, Otrs y Trac, pero no conozco ninguno y parece que
hay muchísimos más. ¿Cómo funcionan, mediante un
Ocs inventory mas glpi
Enviado desde mi dispositivo de bolsillo inalámbrico BlackBerry®
-Original Message-
From: Gorka gorkali...@yahoo.es
Date: Fri, 2 Mar 2012 09:13:46
To: debian-user-spanish@lists.debian.org
Subject: Gestor de Incidencias
Buenas.
Necesito instalar un gestor de
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
(A mi no me envíes, a la lista.)
Ing Osniel Fariñas Sánchez escribió:
Ing Osniel Fariñas Sánchez escribió:
tenemos a pruebas un server zentyal como PDC en nuestra entidad
,queremos
migrar a debian todas las estaciones de trabajo con
El 02/03/12 09:04, Esteban Torres Rodríguez escribió:
Realmente ahora me planteo si es necesario todo este trabajo en una
máquina que está en producción ya. La historia es que esta máquina
tiene un proxy-cache instalado y en uno los repasos a la documentación
de squid he visto que se
Hola,
Tengo una particion de datos en un servidor http que no puedo
desmontar. Parece que hay algun fichero en uso:
urfe3:~# umount /dev/sdc1 /data
umount: /data: device is busy.
(In some cases useful info about processes that use
the device is found by lsof(8) or fuser(1)
Sin
2012/3/2 Francesc Guitart fguit...@gmail.com:
Hola,
Tengo una particion de datos en un servidor http que no puedo
desmontar. Parece que hay algun fichero en uso:
urfe3:~# umount /dev/sdc1 /data
umount: /data: device is busy.
(In some cases useful info about processes that use
Tomo nota.
Gracias!!!
El día 2 de marzo de 2012 09:25, Juan Antonio
push...@limbo.deathwing.net escribió:
El 02/03/12 09:04, Esteban Torres Rodríguez escribió:
Realmente ahora me planteo si es necesario todo este trabajo en una
máquina que está en producción ya. La historia es que esta
Que tenga inventario está muy bien también, sí señor.
¿Alguno gestor de incidencias que integre inventario del parque informático?
De: gerald.lan...@gmail.com [mailto:gerald.lan...@gmail.com]
Enviado el: viernes, 02 de marzo de 2012 9:19
Para: Gorka; debian-user-spanish@lists.debian.org
On 01/03/12 11:25, Camaleón wrote:
El Thu, 01 Mar 2012 11:03:01 -0500, Ing Osniel Fariñas Sánchez escribió:
tenemos a pruebas un server zentyal como PDC en nuestra entidad
,queremos migrar a debian todas las estaciones de trabajo con Windows
,pero no sabemos como integrar debian con el PDC de
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Gorka escribió:
Que tenga inventario está muy bien también, sí señor.
¿Alguno gestor de incidencias que integre inventario del parque informático?
Buenas
Por favor evita el top posting. Ayer te envie un correo con muchos
datos,
El día 1 de marzo de 2012 22:37, Armando Felipe Fuentes Denis
danny.erne...@cha.jovenclub.cu escribió:
Hola lista como podria extraer las herramientas del Backtrack 5 y su menu
para mi Debian
Instalándolas en tu debian, mediante apt, aptitude, synaptic, fuentes,
etc.. ¿el menú? no te
El día 2 de marzo de 2012 14:21, Felix Perez
felix.listadeb...@gmail.com escribió:
El día 1 de marzo de 2012 22:37, Armando Felipe Fuentes Denis
danny.erne...@cha.jovenclub.cu escribió:
Hola lista como podria extraer las herramientas del Backtrack 5 y su menu
para mi Debian
Instalándolas en
On 03/02/12 at 10:21AM, Felix Perez wrote:
El día 1 de marzo de 2012 22:37, Armando Felipe Fuentes Denis
danny.erne...@cha.jovenclub.cu escribió:
Hola lista como podria extraer las herramientas del Backtrack 5 y su menu
para mi Debian
Instalándolas en tu debian, mediante apt, aptitude,
2012/3/2, Diego Sanchez dieg...@gmail.com:
2012/3/2 Francesc Guitart fguit...@gmail.com:
Hola,
Tengo una particion de datos en un servidor http que no puedo
desmontar. Parece que hay algun fichero en uso:
urfe3:~# umount /dev/sdc1 /data
umount: /data: device is busy.
(In some
El Thu, 01 Mar 2012 17:03:30 -0500, academia escribió:
Hola lista. Hoy instale Debian 6 desde una pendrive porque la PC no
tiene lectora de CD/DVD.
Me encontré que cuando al poner cualquier pendrive, pues me da error.
Esto nunca me había ocurrido en ninguna distro de linux.
¿Qué tipo de
El Thu, 01 Mar 2012 20:37:17 -0500, Armando Felipe Fuentes Denis escribió:
(has secuestrado un hilo, abro uno nuevo)
Hola lista como podria extraer las herramientas del Backtrack 5 y su
menu para mi Debian
¿Lo qué? ¿Qué es lo que quieres hacer?
(en fin... iniciando modo bola de cristal)
Si
El Fri, 02 Mar 2012 01:48:55 -0600, Ricardo Cruz Navarro escribió:
(ese html...)
¿Algún hosting que conoscan que al contratarlo ayude a GNU/Linux, o en
particular debian?
Pienso contratar un host personal y tengo duda de si existe algo así
como lo que comento arriba.
¿Quieres decir que
El Fri, 02 Mar 2012 07:32:36 -0500, Yoinier Hernandez Nieves escribió:
On 01/03/12 11:25, Camaleón wrote:
El Thu, 01 Mar 2012 11:03:01 -0500, Ing Osniel Fariñas Sánchez
escribió:
tenemos a pruebas un server zentyal como PDC en nuestra entidad
,queremos migrar a debian todas las estaciones
El Fri, 02 Mar 2012 15:00:34 +0100, Francesc Guitart escribió:
2012/3/2, Diego Sanchez dieg...@gmail.com:
(...)
urfe3:~# fuser -m -v /data
USERPID ACCESS COMMAND
/data: root kernel mount /data
Que puede ser? Como puedo desmontarla? Estoy
-Mensaje original-
De: Camaleón [mailto:noela...@gmail.com]
Enviado el: viernes, 02 de marzo de 2012 16:03
Para: debian-user-spanish@lists.debian.org
Asunto: Re: Gestor de Incidencias
El Fri, 02 Mar 2012 09:13:46 +0100, Gorka escribió:
Buenas.
Por todas las espirales...
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Paradix ;) escribió:
Saludos lista
Desde hace un tiempo muchos listeros que vivimos en Cuba notamos que nos
es imposible acceder a www.esdebian.org. En mi caso al menos, he
concluido que no se debe a ningún tipo de política restrictiva sino a
El Fri, 02 Mar 2012 07:32:36 -0500, Yoinier Hernandez Nieves escribió:
On 01/03/12 11:25, Camaleón wrote:
El Thu, 01 Mar 2012 11:03:01 -0500, Ing Osniel Fariñas Sánchez
escribió:
tenemos a pruebas un server zentyal como PDC en nuestra entidad
,queremos migrar a debian todas las
http://wiki.debian.org/Compartir_red_fisica_con_WiFi
Aporte del día, por si a alguno le interesa.
No es nada nuevo, pero está escrito en castellano y un poco más claro
que lo que encontré por ahí.
JAP
--
To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org
with a subject of
Hola...
El 02/03/12 19:08, JAP escribió:
http://wiki.debian.org/Compartir_red_fisica_con_WiFi
Aporte del dÃa, por si a alguno le interesa.
No es nada nuevo, pero está escrito en castellano y un poco más claro
que lo que encontré por ahÃ.
Se agradece... no haberlo visto antes... :-)
Hola,
Hoy por primera vez desde que instalé Debian 6.04 (instalación de red en
una Asus eee pc 1215p usando un pen drive con el .iso) quise consultar la
ayuda en yelp. Para mi sorpresa los archivos que se abren lo hacen en .xml.
Los que no lo hacen muestran la siguiente leyenda cuando presiono en
Colegas, de hace 2 dias en adelante, mi Mailman me ha empesado a consumir
demasiada memoria Ram, el proceso de python asociado al Incoming de Mailman
se dispara hasta llegar a casi 1 gb de RAM.
He googleado y hay poco al respecto, solo he encontrado 2 POST al respecto y
sin respuestas.
Si
El día 29 de febrero de 2012 04:07, Jorge Hequera
jorgehequ...@gmail.com escribió:
El 29 de febrero de 2012 05:37, rantis cares rantisca...@gmail.com
escribió:
Hola, que cámara estas usando?
Estoy usando una camara Logitech (no recuerdo que modelo es y no puedo
verlo porque ya esta
El día 29 de febrero de 2012 04:01, JulHer jul...@escomposlinux.org escribió:
El mié, 29-02-2012 a las 02:37 -0600, rantis cares escribió:
Listeros:
Buenas noches tengan todos ustedes.
Hoy vengo con una pregunta nueva sobre motion. He instalado este soft
sin embargo tengo un problema.
El día 19 de enero de 2012 00:48, Ramses ramses.sevi...@gmail.com escribió:
Buenos días,
El 19/01/2012, a las 03:16, rantis cares rantisca...@gmail.com escribió:
El día 18 de enero de 2012 00:53, Ramses ramses.sevi...@gmail.com escribió:
Buenas,
El 18/01/2012, a las 05:19, Matías A.
El día 6 de enero de 2012 14:01, ciracusa cirac...@gmail.com escribió:
Gracias Colega.
Vaya, creo que ya empiezo a ser de un poquito de utilidad en la comunidad (jeje)
En mi caso te comento que instalé http://freedns.afraid.org/
Muchas Gracias!
ya no deberia llamarse DEBIAN USER SPANISH
Bom dia estou com duvida para criar um servidor de proxy, assim meu
problema é tenho duas redes separadas e em uma me da acesso a um material
especifico, gostaria de na rede com proxy que eu estou quando eu acessar o
material que eu quero ele vai me redirecionar para o proxy desta segunda
rede,
Bom dia,
Não entendi muito á ultima parte quando você fala sobre Material, + em fim
o que entendi você precisa um redirect de proxy, me corrija se estiver
errado você pode utilizar WAP no dhcp para apontar para proxy que vc quer
ou dns...por favor explique melhor n entendi...
Em 2 de março de
cenário:
rede 1 rede onde estou com acesso a net e afins veia squid
rede 2 acesso a um site interno que só me da acesso se eu usar o proxy da
rede 2
assim como estou na rede 1 preciso navegar normalmente na net mas para
realizar a leitura eu preciso estar com o proxy da rede 2 por exemplo para
Também acho que seu caminho é usar o WPAD.
Ele é simples de ser implementado e tem bastante documentação...
[ ]'s
2012/3/2 Anderson Bertling andersonbertl...@gmail.com
cenário:
rede 1 rede onde estou com acesso a net e afins veia squid
rede 2 acesso a um site interno que só me da
Rede 1 rede onde estou com acesso a net e afins via Squid Ok não
necessitamos realizar nenhuma modificação certo ?
Rede 2
rede 2 acesso a um site interno que só me da acesso se eu usar o proxy da
rede 2
assim como estou na rede 1 preciso navegar normalmente na net mas para
realizar a leitura
Olá Lista,
Eu tinha aqui na empresa um servidor debian samba, fazendo o papel de PDC para
rede. Tudo funcionando 100% e com um backup em fita. Tive uma problema nos HDs
do servidor e todo o serviço parou de funcionar. Bom, como minha rede não é
muito grande e não tenho nada crítico aqui,
Alguém por gentileza poderia me ensinar como fazer esse compartilhamento de uma
maneira simples? O acham do uso do iptables?
--Att,__Samuel
--
Dae tche tudo bem?
echo 1 /proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -j MASQUERADE
Em 2 de março de 2012 21:27, Samuel Andrade Teixeira
kerne...@yahoo.com.brescreveu:
Alguém por gentileza poderia me ensinar como fazer esse compartilhamento
de uma maneira simples? O acham
On Thu, Mar 01, 2012 at 08:11:46PM +0200, Camaleón wrote:
On Thu, 01 Mar 2012 09:35:26 +0200, Johann Spies wrote:
When I left-click on a tab in gnome-terminal the focus is on the tab and
not in the terminal at the prompt. How can I change that behaviour to
take the focus to where the
On Thu, Mar 01, 2012 at 04:23:05PM +0200, Alberto Fuentes wrote:
If you want to avoid the problem altogether you can just use
alt + 1 for tab 1
alt + 2 for tab 2,
etc...
ctrl + shift + T for new tab
ctrl + shift + W to close tab
Yes I use that regularly.
Thanks for your attention.
My home network server has started to give this problem some weeks ago:
When it boot, the root filesystem is mounted readonly.
I have to go back to runlevel 1, remount the filesystem with
mount -o remount, rw /
and repair the network:
first 'ifconfig lo up' (it does not show up after
Hi,
I've unsubscribed from using the gmail mail server and now using the
mail sever provided by my domain host.
Now will I see my own posts @0836Z
--
--
Best wishes / 73
Richard Bown
e-mail: rich...@g8jvm.com or richard.b...@blueyonder.co.uk
nil carborundum a illegitemis
On Fri, 2 Mar 2012 08:36:35 +
richard rich...@g8jvm.com wrote:
Hi,
I've unsubscribed from using the gmail mail server and now using the
mail sever provided by my domain host.
Now will I see my own posts @0836Z
It took a while to get around the loop, but I now get a copy :)
--
--
When I double click on the tab I get that rectange and then the focus
remains in the tab rather than the command prompt. To remove it and
recover the normal behaviour I have to click over the terminal window
itself.
Yes. That is the behaviour I want to change.
double click seems to change the
Hi,
I've changed my mail host, maybe I'll see what I post now.
--
--
Best wishes / 73
Richard Bown
e-mail: rich...@g8jvm.com or richard.b...@blueyonder.co.uk
nil carborundum a illegitemis
##
Ham Call G8JVM .
On Fri, Mar 02, 2012 at 07:29:52AM +0100, Raffaele Morelli wrote:
You can remove /bin/ and/or /usr/local/bin from his PATH by changing its
/home/user/.profile
They could just add it back, though. This doesn't offer any serious protection.
--
To UNSUBSCRIBE, email to
Hi all!
Currently I have a host with Debian GNU/Linux Lenny on which I've
compiled a 2.6.32 kernel (using the Backports source code) to add
support of Layer7 and IMQ.
The package with the Backports kernel binary works well, but when I boot
my compiled kernel, MD device on / is not found. The
02/03/2012 10:37, Daniel Bareiro wrote:
Hi all!
Currently I have a host with Debian GNU/Linux Lenny on which I've
compiled a 2.6.32 kernel (using the Backports source code) to add
support of Layer7 and IMQ.
The package with the Backports kernel binary works well, but when I boot
my
2012/3/2 Jon Dowland j...@debian.org
On Fri, Mar 02, 2012 at 07:29:52AM +0100, Raffaele Morelli wrote:
You can remove /bin/ and/or /usr/local/bin from his PATH by changing its
/home/user/.profile
They could just add it back, though. This doesn't offer any serious
protection.
Of course,
Johann Spies wrote:
My home network server has started to give this problem some weeks ago:
When it boot, the root filesystem is mounted readonly.
And it doesn't get remounted read-write? I suspect one of three
problems.
To begin with the root filesystem is always booted read-only. This is
Raffaele Morelli wrote:
Jon Dowland wrote:
Raffaele Morelli wrote:
You can remove /bin/ and/or /usr/local/bin from his PATH by changing its
/home/user/.profile
They could just add it back, though. This doesn't offer any serious
protection.
Of course, but then
chown root:user
On Thu, Mar 01, 2012 at 10:15:22AM +0200, Andrei POPESCU wrote:
Files in /usr are not meant to be edited by the admin, you want /etc
instead.
Put a file under /etc/X11/xorg.conf.d/ with your settings instead.
Kind regards,
Andrei
--
But if only My system didn't have the directory
On 3/2/2012 3:37 AM, Daniel Bareiro wrote:
Hi all!
Currently I have a host with Debian GNU/Linux Lenny on which I've
compiled a 2.6.32 kernel (using the Backports source code) to add
support of Layer7 and IMQ.
The package with the Backports kernel binary works well, but when I boot
my
On Thu 01 Mar 2012 at 21:51:09 -1000, Joel Roth wrote:
On Thu, Mar 01, 2012 at 01:18:22PM +, Brian wrote:
What is the result of
file your_supposed_ppd_file ?
UTF-8 Unicode (with BOM) text
This is the norm here:
brian@desktop:/usr/share/ppd/cups-pdf$ file CUPS-PDF.ppd
On Thu 01 Mar 2012 at 18:54:55 -1000, Joel Roth wrote:
On Thu, Mar 01, 2012 at 05:11:28PM +, Camale??n wrote:
Good to know, but if your only problem was in selecting the PPD file from
CUPS wizard, just copy the PPD manually as instructed and go on :-)
That is easier now that I see
On Fri, Mar 02, 2012 at 11:01:05AM +0200, Alberto Fuentes wrote:
double click seems to change the focus from the terminal to the tab. do
you click or doble click the tab to change tabs?
Aha! I did not see that. Either double click or when the focus was on
one tab and the click is on another
On Fri, Mar 02, 2012 at 12:13:31PM +0200, Bob Proulx wrote:
Johann Spies wrote:
My home network server has started to give this problem some weeks ago:
When it boot, the root filesystem is mounted readonly.
And it doesn't get remounted read-write?
No.
I suspect one of three
Hi,
I'm running Debian 6.0.4 on an Iomega ix2-200 (Marvell Kirkwood) and I
can use /dev/input/event0 to detect button presses via the gpio-keys
driver.
So far I'm using a simple perl script to read from /dev/input/event0 and
do things like shutdown the box when pressed for more than 5 seconds
I am having issues with sound on my son's computer. We are unable to run
two sound applications simultaneously. Occasionally, I can stumble upon a
combination of more than one (usually two) that will work together. But,
it's not repeatable.
I have tried a few combinations non of which worked
On Sex, 02 Mar 2012, lina wrote:
sorry again, a bit off-topic.
A lot I'd say. You might get more help at a Tex-specific list such as
texhax (http://tug.org/mailman/listinfo/texhax).
My question is that how to cite something in the text. usually is
superscript.
like [8] as superscript
Hi,
How to examine close the lid settings,
Long time ago I followed a suggestion (forget exactly how), it worked
well, once close the lid, it got sleep
today update something like
desktop-file-utils0.18-1
gnome-menus3.2.0.1-2
man-db2.6.1-1
hicolor-icon-theme0.12-1
doc-base0.10.3
2012/3/2 Darren Crotchett deb...@crotchett.com
I am having issues with sound on my son's computer. We are unable to run
two sound applications simultaneously. Occasionally, I can stumble upon a
combination of more than one (usually two) that will work together. But,
it's not repeatable.
On Fri, Mar 2, 2012 at 8:49 PM, Eduardo M KALINOWSKI
edua...@kalinowski.com.br wrote:
On Sex, 02 Mar 2012, lina wrote:
sorry again, a bit off-topic.
A lot I'd say. You might get more help at a Tex-specific list such as texhax
(http://tug.org/mailman/listinfo/texhax).
I just subscribe,
On 01/03/12 17:50, tv.deb...@googlemail.com wrote:
01/03/2012 18:01, Sian Mountbatten wrote:
Hello All!
I started to watch a DVD last night with VLC when the screen froze.
Nothing would work, neither the mouse nor the keyboard. I did a H/W
reset and rebooted the OS and VLC. I set the film to
Hi,
How to configure ddclient to recognize the eth0 and wlan0 at the same time,
# /etc/ddclient.conf
protocol=dyndns2
#use=web, web=checkip.dyndns.com, web-skip='IP Address'
use=if, if=eth0
#use=if, if=wlan0
server=members.dyndns.org
login=lina
password='827827'
# ddclient restart
WARNING:
Bijoy Lobo bijoy.l...@paladion.net wrote:
Is there a way where i can only assign a few binaries to user like,
su - ls ? I do not want him to access anything else from /bin
or /usr/local/bin
This is hard to do well, and I haven't yet seen any suggestions responding
to your post that can't be
Hi,
Is it wrong when use
rsync -azvu source destination
sent 16 bytes received 43 bytes 5.13 bytes/sec
total size is 1507939808 speedup is 25558301.83
Destination $ du -sh md_0.xtc
342Mmd_0.xtc
Source $ du -sh md_0.xtc
1.5Gmd_0.xtc
my confusion is that
why it stopped copy the
Thank you so much for this information. I will do that tonight or tomorrow
and report back.
On Fri, Mar 2, 2012 at 7:35 AM, Raffaele Morelli raffaele.more...@gmail.com
wrote:
2012/3/2 Darren Crotchett deb...@crotchett.com
I am having issues with sound on my son's computer. We are unable
On Fri, Mar 02, 2012 at 04:33:56PM +0200, lina wrote:
Is it wrong when use
rsync -azvu source destination
sent 16 bytes received 43 bytes 5.13 bytes/sec
total size is 1507939808 speedup is 25558301.83
If source is a symlink you have to specify source/ otherwise you can get
something
02/03/2012 14:37, Sian Mountbatten wrote:
On 01/03/12 17:50, tv.deb...@googlemail.com wrote:
01/03/2012 18:01, Sian Mountbatten wrote:
Hello All!
I started to watch a DVD last night with VLC when the screen froze.
Nothing would work, neither the mouse nor the keyboard. I did a H/W
reset and
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 02.03.2012 15:33, lina wrote:
Hi,
Is it wrong when use
rsync -azvu source destination
sent 16 bytes received 43 bytes 5.13 bytes/sec total size is
1507939808 speedup is 25558301.83
Destination $ du -sh md_0.xtc 342Mmd_0.xtc
On Fri, Mar 2, 2012 at 11:15 PM, Johann Spies jsp...@sun.ac.za wrote:
On Fri, Mar 02, 2012 at 04:33:56PM +0200, lina wrote:
Is it wrong when use
rsync -azvu source destination
sent 16 bytes received 43 bytes 5.13 bytes/sec
total size is 1507939808 speedup is 25558301.83
If source is
On Fri, 2012-03-02 at 09:32 +0530, Bijoy Lobo wrote:
Hello Everyone,
Is there a way where i can only assign a few binaries to user like,
su - ls ? I do not want him to access anything else from /bin
or /usr/local/bin
Maybe create a new groups trusted and do the following
cd /bin
chown
On Fri, Mar 2, 2012 at 06:33, lina lina.lastn...@gmail.com wrote:
Hi,
Is it wrong when use
rsync -azvu source destination
sent 16 bytes received 43 bytes 5.13 bytes/sec
total size is 1507939808 speedup is 25558301.83
Destination $ du -sh md_0.xtc
342M md_0.xtc
Source $ du -sh
On Friday, 02 March 2012 10:52:37 +0100,
tv.deb...@googlemail.com wrote:
Currently I have a host with Debian GNU/Linux Lenny on which I've
compiled a 2.6.32 kernel (using the Backports source code) to add
support of Layer7 and IMQ.
The package with the Backports kernel binary works
On Thu, 01 Mar 2012 18:54:55 -1000, Joel Roth wrote:
On Thu, Mar 01, 2012 at 05:11:28PM +, Camale??n wrote:
(...)
I've succeeded using the Generic PCL 6/PCL XL Printer -
CUPS+Gutenprint v5.2.7 (grayscale, 2-sided printing)
Good to know, but if your only problem was in selecting the
Hello,
I just updated a bunch of servers from etch to squeeze (yes I know, took
my time :-)
Everything works fine after a bit of tweaking, except printing. I have a
networked postscript printer managed through cups, and since the upgrade
it has been dead slow.
It is slower to react when
On Fri, Mar 2, 2012 at 05:35, Raffaele Morelli
raffaele.more...@gmail.com wrote:
if you want two or more audio apps to share the same sound device, start
qjackctl, tell vlc to use jack output module and do the same with other apps
if needed.
In qjackctl connection panel you should see all
On 02/03/12 13:29, lina wrote:
Hi,
How to examine close the lid settings,
Long time ago I followed a suggestion (forget exactly how), it worked
well, once close the lid, it got sleep
today update something like
desktop-file-utils0.18-1
gnome-menus3.2.0.1-2
man-db2.6.1-1
On Fri, Mar 2, 2012 at 11:29 PM, HP deb...@spahan.ch wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 02.03.2012 15:33, lina wrote:
Hi,
Is it wrong when use
rsync -azvu source destination
sent 16 bytes received 43 bytes 5.13 bytes/sec total size is
1507939808 speedup is
On Fri, Mar 02, 2012 at 09:59:55PM +0800, lina wrote:
Hi,
How to configure ddclient to recognize the eth0 and wlan0 at the same time,
# /etc/ddclient.conf
protocol=dyndns2
#use=web, web=checkip.dyndns.com, web-skip='IP Address'
use=if, if=eth0
#use=if, if=wlan0
On Fri, 02 Mar 2012 21:59:55 +0800, lina wrote:
How to configure ddclient to recognize the eth0 and wlan0 at the same
time,
You mean having *both* operative interfaces updated with ddclient?
# /etc/ddclient.conf
protocol=dyndns2
#use=web, web=checkip.dyndns.com, web-skip='IP Address'
On Fri, Mar 02, 2012 at 10:33:56PM +0800, lina wrote:
Hi,
Is it wrong when use
rsync -azvu source destination
sent 16 bytes received 43 bytes 5.13 bytes/sec
total size is 1507939808 speedup is 25558301.83
Destination $ du -sh md_0.xtc
342M md_0.xtc
Source $ du -sh md_0.xtc
1 - 100 of 154 matches
Mail list logo