On 5/9/19 1:49 AM, Lothar Schilling wrote:
Hi everybody,
for years I have used CentOS for our server landscape. Now I decided to
give Debian a try. I just set up a Stretch 9.8 system supposed to become
our main backup server. So I set up a backup job wih rsync. But the
going is really very very
On 5/8/19 11:39 PM, Rory Campbell-Lange wrote:
Hi David
Hi Rory. :-)
On 08/05/19, David Christensen (dpchr...@holgerdanske.com) wrote:
On 5/8/19 10:32 AM, Rory Campbell-Lange wrote:
I'm setting up some servers with A2SDi-8C-HLN4F motherboards with Intel
x553 cards that require the ixgbe
On Thu, May 9, 2019, 03:47 songbird wrote:
> Tixy wrote:
> > On Wed, 2019-05-08 at 11:49 -0400, Default User wrote:
> > [...]
> >> And, BTW, when will Unstable ever get into the 5.x.x kernel series?
> >
> > Not until after Buster is released I assume.
>
> i've been running newer kernels from
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
rhkra...@gmail.com wrote:
> On Thursday, May 09, 2019 03:54:33 PM Dan Purgert wrote:
>> Gene Heskett wrote:
>> > On Thursday 09 May 2019 12:00:56 pm john doe wrote:
>> >> I would say the 'profile' that you want to move.
>> >
>> > That does not
On Thu 09 May 2019 at 20:46:34 (+0200), Jan Claeys wrote:
> On Thu, 2019-05-09 at 09:56 +, Curt wrote:
> > In the event there is no functional motherboard speaker, I guess it
> > cannot be a BIOS alarm of any kind.
>
> Some on-board audio chips are wired up so that they can emulate old
>
Vmware solo registrate y disfruta
On Thu, May 9, 2019, 7:26 PM Fernando Romero wrote:
>
>
> El jue., 9 de may. de 2019 20:03, Ramses
> escribió:
>
>> Hola a tod@s,
>>
>> Sé que en esta lista sé mueve gente de muchas ramas profesionales
>> relacionadas con IT, expertos y usuarios básicos, por
On Thursday 09 May 2019 07:53:44 pm David Wright wrote:
> On Thu 09 May 2019 at 16:26:10 (-0400), Gene Heskett wrote:
> > On Thursday 09 May 2019 12:51:24 pm Curt wrote:
> > > On 2019-05-09, Gene Heskett wrote:
> > > > Greetings all;
> > > >
> > > > I have a need to transfer all the prefs
On Thu 09 May 2019 at 16:26:10 (-0400), Gene Heskett wrote:
> On Thursday 09 May 2019 12:51:24 pm Curt wrote:
>
> > On 2019-05-09, Gene Heskett wrote:
> > > Greetings all;
> > >
> > > I have a need to transfer all the prefs -"saved logins" from a
> > > wheezy install to a stretch install,
El jue., 9 de may. de 2019 20:03, Ramses
escribió:
> Hola a tod@s,
>
> Sé que en esta lista sé mueve gente de muchas ramas profesionales
> relacionadas con IT, expertos y usuarios básicos, por eso recurriendo a
> ustedes para hacerles una consulta, tras varios paseos por Google...
>
> Como dice
Hola a tod@s,
Sé que en esta lista sé mueve gente de muchas ramas profesionales relacionadas
con IT, expertos y usuarios básicos, por eso recurriendo a ustedes para
hacerles una consulta, tras varios paseos por Google...
Como dice el Asunto, ¿me podéis recomendar algún/os foros de Redes,
On Thursday 09 May 2019 12:51:24 pm Curt wrote:
> On 2019-05-09, Gene Heskett wrote:
> > Greetings all;
> >
> > I have a need to transfer all the prefs -"saved logins" from a
> > wheezy install to a stretch install, separate drives. And obviously
> > the stretch firefox is about 20 versions
On Thursday, May 09, 2019 03:54:33 PM Dan Purgert wrote:
> Gene Heskett wrote:
> > On Thursday 09 May 2019 12:00:56 pm john doe wrote:
> >> I would say the 'profile' that you want to move.
> >
> > That does not exist in my $home dir on the src drive. Any idea where it
> > may be?
>
> Should be
On Thu 09 May 2019 at 20:31:33 +0200, Jan Claeys wrote:
> On Mon, 2019-05-06 at 13:13 -0400, Gene Heskett wrote:
> > Well, I've uprooted pulse and pulled in the rest of alsa. No sound
> > before or after a reboot now. But I just ran alsamixergui, and found
> > the front speakers tunred off. So I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Gene Heskett wrote:
> On Thursday 09 May 2019 12:00:56 pm john doe wrote:
>
>> On 5/9/2019 5:32 PM, Gene Heskett wrote:
>> > Greetings all;
>> >
>> > I have a need to transfer all the prefs -"saved logins" from a
>> > wheezy install to a stretch
On Thursday 09 May 2019 12:00:56 pm john doe wrote:
> On 5/9/2019 5:32 PM, Gene Heskett wrote:
> > Greetings all;
> >
> > I have a need to transfer all the prefs -"saved logins" from a
> > wheezy install to a stretch install, separate drives. And obviously
> > the stretch firefox is about 20
On Thu 09 May 2019 at 16:51:24 (-), Curt wrote:
> On 2019-05-09, Gene Heskett wrote:
> > Greetings all;
> >
> > I have a need to transfer all the prefs -"saved logins" from a wheezy
> > install to a stretch install, separate drives. And obviously the
> > stretch firefox is about 20
Basile Starynkevitch, au 2019-05-09 :
> Il se trouve que RefPerSys intéresse dès maintenant un jeune
> informaticien indien, Abhishek (il vit à Calcutta). il y
> contribue très activement sur son temps libre lui aussi. Je
> suis devenu un peu son mentor (il a l'âge d'être mon fils). La
>
On Thu, 2019-05-09 at 09:56 +, Curt wrote:
> In the event there is no functional motherboard speaker, I guess it
> cannot be a BIOS alarm of any kind.
Some on-board audio chips are wired up so that they can emulate old
school IBM PC compatible motherboard speakers/buzzers.
--
Jan Claeys
On Mon, 2019-05-06 at 13:13 -0400, Gene Heskett wrote:
> Well, I've uprooted pulse and pulled in the rest of alsa. No sound
> before or after a reboot now. But I just ran alsamixergui, and found
> the front speakers tunred off. So I have audio again, about 4x
> louder than before. So take that
On 5/9/19 8:05 PM, ajh-valmer wrote:
Suffit de taper "gestion de dessins collaborative".
On en trouve à la tonne mais fonctionne t-il pour le dessin ?
Quel point particulier pourrait gêner le dessin partagé
"Inde et France" ? :-)
La bande passante (acceptable pour l'audio, trop faible pour
Suffit de taper "gestion de dessins collaborative".
On en trouve à la tonne mais fonctionne t-il pour le dessin ?
Quel point particulier pourrait gêner le dessin partagé
"Inde et France" ? :-)
Il y avait CVS (Concurrent Version System)
pour les développeurs...
Rachat de GitHub par Microsoft :
www.zdnet.fr/actualites/rachat-de-github-par-microsoft-une-victoire-pour-la-fondation-linux-39869471.htm
et
Windows 10 bientôt livré avec un noyau Linux complet,
opensource sous licence GPL :
El 9/5/19 a las 12:36, Ignacio Martirén escribió:
Hola. Soy usuario Debian pero poco experto. Tengo instalado Stretch,
con Xforce y Cinnamon como alternativo. Evidentemente se ha dañado
algún archivo del escritorio Xforce y no funciona bien. Quisiera saber
cuáles son los comandos para
On Thursday, May 09, 2019 10:08:41 AM Martin wrote:
> I had this looong time ago. Caused by a noisy/broken keyboard cable. My be
> there could be a situation similar on modern USB base keyboards?
Thanks for the reply!
I'll watch for hints that could be the problem -- I use one keyboard / mouse /
Buen día colegas, hace mucho tiempo que no escribo en esta lista.
Esta vez tengo una consulta que hacerles, resulta que en mi lugar de
trabajo necesitamos gestionar eficientemente los recursos energéticos
y pues nos han recomendado comprar una licencia de RETScreen
Expert(creada por el gobierno
On 2019-05-09, Gene Heskett wrote:
> Greetings all;
>
> I have a need to transfer all the prefs -"saved logins" from a wheezy
> install to a stretch install, separate drives. And obviously the
> stretch firefox is about 20 versions newer. What file do I copy from the
> wheezy drive to the
Hi
I'm murdered.
(remote control of CNS after 2012-2014..)
Do you want to help me?
I have born in 1980 in Finland and worked as Senior Analyst and Scientist for
many companies.
I'm in San Francisco and trying to travel to Europe asap as people here quite
crazy and hotels and taxis dont work
On 5/9/2019 5:32 PM, Gene Heskett wrote:
> Greetings all;
>
> I have a need to transfer all the prefs -"saved logins" from a wheezy
> install to a stretch install, separate drives. And obviously the
> stretch firefox is about 20 versions newer. What file do I copy from the
> wheezy drive to the
On 2019-05-09, rhkra...@gmail.com wrote:
>
>> In the event there is no functional motherboard speaker, I guess it
>> cannot be a BIOS alarm of any kind.
>
> Interesting -- I'm not used to / familiar with a speaker on the MB -- in the
> old days there was typically a speaker in the case that (if
Greetings all;
I have a need to transfer all the prefs -"saved logins" from a wheezy
install to a stretch install, separate drives. And obviously the
stretch firefox is about 20 versions newer. What file do I copy from the
wheezy drive to the stretch drive so my bank knows its me?
Cheers,
Hola. Soy usuario Debian pero poco experto. Tengo instalado Stretch,
con Xforce y Cinnamon como alternativo. Evidentemente se ha dañado
algún archivo del escritorio Xforce y no funciona bien. Quisiera saber
cuáles son los comandos para desinstalarlo y reínstalarlo para que se
elimine archivo/s
Hi,
Lothar Schilling wrote:
> Fast enough...
> dd if=/daten/testfile bs=1G oflag=direct of=/daten/testfile2
> 10737418240 Bytes (11 GB, 10 GiB) kopiert, 72,7297 s, 148 MB/s
So this is sufficiently fast, but
cp /daten/testfile /daten/testfile2
lasts 2000 seconds ?
> dd if=/daten/testfile
On Thursday 09 May 2019 10:28:10 am Jeremy Nicoll wrote:
> On Thu, 9 May 2019, at 15:17, Gene Heskett wrote:
> > ... and its one of the reasons
> > an SSD seems so much faster because they seek in a microsecond
>
> In what sense does an SSD have "seek time"? Seek time is
> a tightly defined
Jeremy Nicoll wrote:
> On Thu, 9 May 2019, at 15:17, Gene Heskett wrote:
> > ... and its one of the reasons
> > an SSD seems so much faster because they seek in a microsecond
>
> In what sense does an SSD have "seek time"? Seek time is
> a tightly defined thing.
>
> There must be delays in
On Thu, 9 May 2019, at 15:17, Gene Heskett wrote:
> ... and its one of the reasons
> an SSD seems so much faster because they seek in a microsecond
In what sense does an SSD have "seek time"? Seek time is
a tightly defined thing.
There must be delays in SSD firmware's processing, I suppose,
On Thursday 09 May 2019 09:57:38 am Gene Heskett wrote:
> On Thursday 09 May 2019 05:56:58 am Curt wrote:
> > On 2019-05-09, Cindy Sue Causey wrote:
> > > I had something similar that sounded like a little 6" Elf sneezing
> > > in my little ASUS laptop/netbook. Same deal where it was very
> > >
On Thursday 09 May 2019 04:49:32 am Lothar Schilling wrote:
> Hi everybody,
>
> for years I have used CentOS for our server landscape. Now I decided
> to give Debian a try. I just set up a Stretch 9.8 system supposed to
> become our main backup server. So I set up a backup job wih rsync. But
>
Am 09.05.19 um 02:32 schrieb rhkra...@gmail.com:
> On my Debian Jessie system, for several hours today I've been hearing a beep
> (through my audio system / speakers / headphones) something like the beep
> that
> used to come out of the PC speaker (on older computers -- I don't think I
> even
Am 09.05.19 um 14:43 schrieb Lothar Schilling:
> Am 09.05.2019 um 13:27 schrieb Martin:
>> [..]
>>> hdparm -tT /dev/sda
>>> /dev/sda:
>>> Timing cached reads: 13348 MB in 2.00 seconds = 6683.42 MB/sec
>>> Timing buffered disk reads: 1014 MB in 3.00 seconds = 337.72 MB/sec
>>>
>>> iotop -o
On Thursday 09 May 2019 05:56:58 am Curt wrote:
> On 2019-05-09, Cindy Sue Causey wrote:
> > I had something similar that sounded like a little 6" Elf sneezing
> > in my little ASUS laptop/netbook. Same deal where it was very
> > sporadic. It turned out to most likely be a warning that it was
>
Thanks to all who replied -- see below:
On Thursday, May 09, 2019 02:10:16 AM Cindy Sue Causey wrote:
> On 5/8/19, Charlie Kravetz wrote:
> > Possibly an open website? Some of those become very annoying.
I'll look into that -- thankfully that is the computer that probably has only
30 to 40
Le Thu, 9 May 2019 08:35:28 +0200,
didier gaumet a écrit :
> Le 09/05/2019 à 02:15, Basile Starynkevitch a écrit :
> [...]
> > Je cherche donc une application qui permette de partager un dessin entre
> > deux postes Linux.
>
> Je n'y connais rien mais je chercherais sur internet des solutions
On Thu, May 9, 2019 at 07:35 Dan Ritter wrote:
> Tom Browder wrote:
> > My remote server hosted with Dedispec has serious problems and they have
> > offered me access via KVM.
> >
> > What do I need on my end to use that access to fix my remote host from my
> > home network?
> >
> > All the
Am 09.05.2019 um 13:23 schrieb Keith Christian:
> What is the rsync command line, could there be a —bwlimit option in it?
No, there isn't. Anyway, cp has the same problem.
El 8/5/19 a las 18:07, Uzziel Contreras Portilla escribió:
Usuarios de Debian;
Buenas tardes a todos, tengo usando Linux cerca de 10 años y el
equivalente usando Debian, actualmente mis servidores de aplicaciones
las tengo en Debian 9.9, servidores de archvios, servidores de Rocket
Am 09.05.2019 um 13:27 schrieb Martin:
> [..]
>> hdparm -tT /dev/sda
>> /dev/sda:
>> Timing cached reads: 13348 MB in 2.00 seconds = 6683.42 MB/sec
>> Timing buffered disk reads: 1014 MB in 3.00 seconds = 337.72 MB/sec
>>
>> iotop -o (for rsync and cp)
>> Total DISK READ : 0.00 B/s |
Tom Browder wrote:
> My remote server hosted with Dedispec has serious problems and they have
> offered me access via KVM.
>
> What do I need on my end to use that access to fix my remote host from my
> home network?
>
> All the references I see are access to VMs running on a local network.
On Thu, May 09, 2019 at 06:52:57AM -0500, Tom Browder wrote:
>My remote server hosted with Dedispec has serious problems and they have
>offered me access via KVM.
>What do I need on my end to use that access to fix my remote host from my
>home network?
>All the references I see
On Thu 09 May 2019 at 07:29:49 +0100, Rory Campbell-Lange wrote:
> Thanks for your advice, Brian.
>
> Are you referring to "It is not possible to install sid from a netinst
> or full CD. Please use the netboot installation method". I certainly
> missed that. My apologies.
No need to apologise;
My remote server hosted with Dedispec has serious problems and they have
offered me access via KVM.
What do I need on my end to use that access to fix my remote host from my
home network?
All the references I see are access to VMs running on a local network.
Thanks.
-Tom
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Brian wrote:
> On Wed 08 May 2019 at 18:00:01 -, Dan Purgert wrote:
>
>> Brian wrote:
>> >
>> > You have a PPD in /etc/cups/ppd for the printer. What do the
>>
>> hm, nope.
>>
>> $ ls /etc/cups/ppd
>> ls: cannot access '/etc/cups/ppd': No
[..]
> hdparm -tT /dev/sda
> /dev/sda:
> Timing cached reads: 13348 MB in 2.00 seconds = 6683.42 MB/sec
> Timing buffered disk reads: 1014 MB in 3.00 seconds = 337.72 MB/sec
>
> iotop -o (for rsync and cp)
> Total DISK READ : 0.00 B/s | Total DISK WRITE : 476.15 K/s
> Actual DISK
Chicago we're coming for you.
Hi D D E B S A Taste Of Home,
Are you planning to attend the 2019 National Restaurant Association Show May
18th - 21st?
Yes, I am attending! Click here
No, I'm not attending. Click here
Dining Alliance, Inc.
307 Waverley Oaks Road Suite 401, Waltham, MA 02452
What is the rsync command line, could there be a —bwlimit option in it?
Am 09.05.2019 um 12:50 schrieb Jonas Smedegaard:
> [ replying to list, not discretely ]
>
> Quoting Lothar Schilling (2019-05-09 12:36:55)
>> Am 09.05.2019 um 12:26 schrieb Jonas Smedegaard:
>>> Quoting Lothar Schilling (2019-05-09 11:46:00)
Am 09.05.2019 um 11:14 schrieb Jonas Smedegaard:
[ replying to list, not discretely ]
Quoting Lothar Schilling (2019-05-09 12:36:55)
> Am 09.05.2019 um 12:26 schrieb Jonas Smedegaard:
> > Quoting Lothar Schilling (2019-05-09 11:46:00)
> >> Am 09.05.2019 um 11:14 schrieb Jonas Smedegaard:
> >>> Quoting Lothar Schilling (2019-05-09 10:49:32)
>
Quoting Lothar Schilling (2019-05-09 11:46:00)
> Am 09.05.2019 um 11:14 schrieb Jonas Smedegaard:
> > Quoting Lothar Schilling (2019-05-09 10:49:32)
> >> I just set up a Stretch 9.8 system supposed to become our main
> >> backup server. So I set up a backup job wih rsync. But the going is
> >>
Am 09.05.2019 um 11:51 schrieb Kevin DAGNEAUX:
> Le 09/05/2019 à 11:46, Lothar Schilling a écrit :
>> Am 09.05.2019 um 11:14 schrieb Jonas Smedegaard:
>>> Quoting Lothar Schilling (2019-05-09 10:49:32)
for years I have used CentOS for our server landscape. Now I decided
to give Debian a
On 2019-05-09, Cindy Sue Causey wrote:
>
>
> I had something similar that sounded like a little 6" Elf sneezing in
> my little ASUS laptop/netbook. Same deal where it was very sporadic.
> It turned out to most likely be a warning that it was about to *CLICK*
> off due to overheating..
>
> $
Le 09/05/2019 à 11:46, Lothar Schilling a écrit :
Am 09.05.2019 um 11:14 schrieb Jonas Smedegaard:
Quoting Lothar Schilling (2019-05-09 10:49:32)
for years I have used CentOS for our server landscape. Now I decided
to give Debian a try.
Welcome to Debian!
I sincerely hope you will appreciate
Am 09.05.2019 um 11:14 schrieb Jonas Smedegaard:
> Quoting Lothar Schilling (2019-05-09 10:49:32)
>> for years I have used CentOS for our server landscape. Now I decided
>> to give Debian a try.
> Welcome to Debian!
>
> I sincerely hope you will appreciate Debian.
>
>
>> I just set up a Stretch
Quoting Lothar Schilling (2019-05-09 10:49:32)
> for years I have used CentOS for our server landscape. Now I decided
> to give Debian a try.
Welcome to Debian!
I sincerely hope you will appreciate Debian.
> I just set up a Stretch 9.8 system supposed to become our main backup
> server. So I
As-tu testé cette bibliothèque javascript ?
https://togetherjs.com/
Que tu peux tester en action collaboration dessin ici
https://togetherjs.com/examples/drawing/
--
Sent from: http://debian.2.n7.nabble.com/debian-user-french-f1152225.html
Vipul writes:
> I've been using Debian from couples of years but haven't contributed
> yet back to community. I want to contribute to Debian by maintaining
> packages and fixing bugs. Since I'm using Debian for work purpose also
> so, I don't want to mess-up with my system by installing unstable
>
Hi everybody,
for years I have used CentOS for our server landscape. Now I decided to
give Debian a try. I just set up a Stretch 9.8 system supposed to become
our main backup server. So I set up a backup job wih rsync. But the
going is really very very slow. Trying to figure out what's
__
I'm using this express-made address because personal addresses aren't
masked enough at this mail public archive. Public archive administrator
should fix this against automated addresses collectors.
El 8/5/19 a les 20:14, Eduard Selma ha escrit:
> El 8/5/19 a les 17:08, Narcis Garcia ha
Entenc que passa el mateix amb diferents USB.
Vaig a discutir una mica la part de software:
també s'ha de dir que el dd sense bs (blocksize) és especialment lent.
I know when I'm copying hard disks I get a faster rate by specifying
bs=1M than by using bs=4k or the default. I'm talking speed
Tixy wrote:
> On Wed, 2019-05-08 at 11:49 -0400, Default User wrote:
> [...]
>> And, BTW, when will Unstable ever get into the 5.x.x kernel series?
>
> Not until after Buster is released I assume.
i've been running newer kernels from the experimental
suite. working ok for me.
songbird
Le 09/05/2019 à 08:33, herve a écrit :
[..]
> C'est tout ce qu'il me faut pour l'instant et je m'en contenterai en
> attendant un rétablissement complet.
Alors, je suis ignare dans le domaine, donc que quelqu'un n'hésite pas à
corriger mes propos, mais d'après ce que je comprends, il n'y aura pas
Le 08/05/2019 à 22:47, Rory Campbell-Lange a écrit :
[..]
> I downloaded debian-testing-amd64-netinst.iso on 29 April but having
> just tested this I'm not getting a choice of distribution. I'm in expert
> mode (console) -- perhaps I'll try again on the graphical version.
[..]
Hello Rory,
being
Le 09/05/2019 à 02:15, Basile Starynkevitch a écrit :
[...]
> Je cherche donc une application qui permette de partager un dessin entre
> deux postes Linux.
Je n'y connais rien mais je chercherais sur internet des solutions pour
"dessin collaboratif", "collaborating drawing" ou "collective
Hi David
On 08/05/19, David Christensen (dpchr...@holgerdanske.com) wrote:
> On 5/8/19 10:32 AM, Rory Campbell-Lange wrote:
> > I'm setting up some servers with A2SDi-8C-HLN4F motherboards with Intel
> > x553 cards that require the ixgbe kernel module.
> >
> > The latest stable netinstall image
Le 30/04/2019 à 20:03, Pascal Hambourg a écrit :
Le 30/04/2019 à 07:20, herve a écrit :
J'utilise iced-tea pour un interprêter le JNLP de prorealtime (pour
aromatiser ma pauvre retraite) mais depuis 15 jours trois semaines
plus moyen d'avoir d'affichage graphique. Le debug affiche un nombre
On 08/05/19, Brian (a...@cityscape.co.uk) wrote:
> On Wed 08 May 2019 at 22:12:41 +0100, Rory Campbell-Lange wrote:
>
> > On 08/05/19, Rory Campbell-Lange (r...@campbell-lange.net) wrote:
> > > On 08/05/19, Andy Smith (a...@strugglers.net) wrote:
> > > > On Wed, May 08, 2019 at 06:32:43PM +0100,
Le 08/05/2019 à 19:16, MERLIN Philippe a écrit :
> Malheureusement après plusieurs tests, dans mon cas cela ne marche pas, seul
> le lancement d'Alsamixer solutionne uniquement pour cette session le
> problème.
> On dirait qu'au démarrage les paramètres enregistrés sont ignorés ou alsa en
>
On 5/8/19, Charlie Kravetz wrote:
> On Wed, 8 May 2019 20:32:49 -0400
> rhkra...@gmail.com wrote:
>
>>On my Debian Jessie system, for several hours today I've been hearing a
>> beep
>>(through my audio system / speakers / headphones) something like the beep
>> that
>>used to come out of the PC
76 matches
Mail list logo
