Just an idea :)
Its not a scsi CDROM drive is it, have seen similar type problems with NT
booting of
scsi cdrom. If it is does the kernel have support for the scsi controller ???
Syrus Nemat-Nasser wrote:
Hello folks.
This is not Debian-specific, but my brother-in-law got a kernel panic
on 28 Oct 99, Bryan K. Walton wrote...
On Wed, 27 Oct 1999, Salman Ahmed wrote:
J == John [EMAIL PROTECTED] writes:
J Firstly, when I boot, I do not get an opportunity apply any
J parameters - the reference to (I think) Peter Anwin and the boot
J prompt do not appear - the word
Hi all,
Im using the current potato with mirror 2.9-10
ive been using mirror for a while now to mirror a couple of debian
branches successfully for some time.
( I set the pc to fire up at night update then poweroff in the morn :) )
But since about a week ago it completely fail or appears to f*k
I would expect debian.org would be a busy mirror etc etc.
But why is mirror giving me errors on a local mirror with prepending what seems
/bin/ls: to file names ... huh
:)
thanx
cheers
Nathan E Norman wrote:
On Sat, 30 Oct 1999, Onno wrote:
: The same problems here
:
: I use rsync
on 27 Oct 99, Brad wrote...
I forget to mention in my earlier message that I had read
'Linux kernel release 2.2' and 'changes 2.2 kernels' notes.
Not sure I understood everything, but I ensured I had
the minimum requirements including ppp v2.3.5
(confirmed by 'pppd -v').
John.
spent trying for
answers - merely my inability to get them.
When I do get ppp working and go for patching, are there any apart
from 8 to 12 incl that do not need to be compiled (between 2 and 13
that is?).
If you do have the time to help I shall be grateful.
Regards, John.
on 03 Nov 99, Matthew Gregan wrote...
On Tue, Nov 02, 1999 at 05:18:00PM +, John wrote:
Kern.log says the kernel is not compiled for ppp (I've not used any
modules).
=20
My limited experience indicates, therefore, it must have to do with
the kernel - but what? I enabled 'networking
on 05 Nov 99, Matthew Gregan wrote...
On Thu, Nov 04, 1999 at 06:07:31PM +, John wrote:
I've obtained patches 2 to 5 but now have a problem in applying them.
My /usr/src had only 'kernel-sources-2.2.1' (and the .tar.gz source which
I'm leaving there for the time being) until I moved
, but everything seems to work just fine.
The only thing I havent checked is what happens when I try and
run dselect (or apt) on multiple machines at the same time.
Could be interesting!!!
Hope this helps.
John Stevenson
peter karlsson wrote:
I thought it be a good idea to share the apt-get
on 06 Nov 99, Matthew Gregan wrote...inter alia
On Fri, Nov 05, 1999 at 05:57:58PM +, John wrote:
I couldn't get this to work. My patches were in /usr/src and I got 'no
such file or directory', so I moved them into the kernel source dir.
and did -p0 thinking that should be right. No luck
on 07 Nov 99, [EMAIL PROTECTED] wrote...
Which web page are using? If http://debianpine.tripod.com, don't
bother. Use http://members.mint.net/frodo/pine the .debs there are known
to be good.
I'm inexperienced with Debian, but had no problem getting Pine from
this web page. However, I've
on 08 Nov 99, [EMAIL PROTECTED] wrote...
On Mon, 8 Nov 1999, John wrote:
I'm inexperienced with Debian, but had no problem getting Pine from
this web page. However, I've been unable to install and configure it.
Pine depends on libc-client4.6 and I can't find it - in another posting
you
on 18 Nov 99, Philip Lehman wrote...
The first message in this thread did not reach me, so I don't know
who initiated the query.
I am a novice and asked the same question . If you go to the archives
and look up Alec Smith's reply to me on 10th Nov, you will find a
fully detailed step by step
is a mystery.
Grateful for any assistance.
John.
), but
I figure someone else has surely written a better one already
Well?
Try out netselect
John
- Joe
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
--
Powered by the Penguin
if it
can be done.
Now I'm starting to 'flex my muscles' I appear to get
a problem a day. Will anyone point me in the right
direction, please.
Regards, John.
Obviously, the new unsubscribe instructions work every bit as
well as the old instructions.
I vote for putting the old crypic instructions back :-)
John
O
On Mon, Nov 27, 2000 at 03:20:32PM -0800, Jodi Pullen wrote:
Please remove me from all your mailing lists.
Follow
lndir is what you seem to be looking for and according to dpkg -S lndir its
part of the xutils package.
this is on woody of course :)..
cheers
[EMAIL PROTECTED] wrote:
Hey all,
I'm looking for a utility/script which will travel recursively through a
directory tree and create links from all
to this list. the arrogant answer to filter out this crap to
a newbie is nonsense.
John
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On bootup of newly installed 2.4 Woody, both mouse and
keyboard are frozen on the first desktop manager
screen. I have tried installing with KDE and again
with Gnome, and the problem is the same either way.
Installation goes fine. In console mode, after
installation, I am able to apt-get
that this might be a DMA issue (which
VERA seems to define as digital memory access). how can i enable
Yo nori,
You are sooo close! man hdparm enable dma on your dvd player.
John
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Sun, Nov 30, 2003 at 07:16:59PM -0500, Nori Heikkinen wrote:
on Sun, 30 Nov 2003 04:03:55PM -0800, John insinuated:
I did not :)
man hdparm
hm, i have ... but i get:
orange:~# hdparm /dev/dvd
/dev/dvd not supported by hdparm
Yo nori!
I'm
On Sun, Nov 30, 2003 at 08:23:27PM -0500, Nori Heikkinen wrote:
on Sun, 30 Nov 2003 05:11:51PM -0800, John insinuated:
On Sun, Nov 30, 2003 at 07:16:59PM -0500, Nori Heikkinen wrote:
orange:~# ll -alF /dev/cdrom
lrwxrwxrwx1 root root4 Apr 21 2001 /dev/cdrom -
scd1
have purchased a Lindows Laptop but have not had
much luck? I have seen a few posts that say describe upgrading the Lindows to Debian
Unstable and it sounds quite easy. Just wondering if anyone has used this laptop and
has any comments.
Thanks for any help
John
www.ngogeeks.com
One problem for us newbies is not knowing what to call
our problems, which makes it hard to know how to
search for a solution on our own. So I apologize in
advance for wasting your time with this one.
Most things work. But when I finally try to enter,
e.g. anything at all on emacs, or yahoo, or
a link so that I can check outt he 'lindows upgrade'
article. HTH
I am afraid I can't remember where I saw the link, at the time I read it
I wasn't looking for a new laptop so didn't bother booking marking it
although I wish I had now.
cheers
John
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
however you can't buy them without a having to pay for
Windows as well.
Anyway will give a follow up when I get the laptop and get a feel of how
it works
cheers
John
www.ngogeeks.com
On Fri, 5 Dec 2003 17:24:17 +1100
John [EMAIL PROTECTED] wrote:
Hi
I have just started looking for a new
_
My CD-Writer is /dev/sr0
/dev/sr1 doesn't work, nor /dev/sda1 nor /dev/sdb1.
Thanks,
John
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
On Fri, Dec 27, 2002 at 10:59:27PM +0100, Hendrik Sattler wrote:
John wrote:
zork:/# lsmod
usb-storage61464 0 (unused)
usb-uhci 20940 0 (unused)
usbcore60896 1 [printer usb-storage pegasus usb-uhci]
(scsi stuff in statically compiled
on dma:
hdparm -q -d1 /dev/hdd(my dvdplayer)
John
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
In message [EMAIL PROTECTED],
[EMAIL PROTECTED] writes
Please see the attached file for details.
[ A MIME application / octet-stream part was included here. ]
PLEASE DELETE [EMAIL PROTECTED] FROM YOUR DATABASE
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
In message [EMAIL PROTECTED], Mark C
[EMAIL PROTECTED] writes
On Wed, 2003-08-20 at 09:03, John wrote:
In message [EMAIL PROTECTED],
[EMAIL PROTECTED] writes
Please see the attached file for details.
[ A MIME application / octet-stream part was included here. ]
PLEASE DELETE [EMAIL PROTECTED
included both the output of xvinfo and the file ~/.xine/config if that helps.
I am sorry the email is so large but I was not sure what was needed.
Yo pete!!
Many people forget to enable dma on their dvdroms. Man hdparm look at the
'-d' option
Also, have you tried ogle to watch dvds?
John
ik heb hier de probeer versie van knoppix.
en ik wilde deze graag instaleren op mijn pc hoe moet ik dat doen.
ps. ik ben pas een beginneling met dit gebeuren.
ik had graag een gemakkelijk omschreven installatie rpogam of antwoord.
bvdjohn..
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
-d.i386.deb
I get the same error when the deb package isn't in the directory I'm in.
John
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
media card a
compact flash card. See:
http://pqiusa.com/products/6-in-1.htm
John
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Have you checked the config files for ssh, here theyre located under
/etc/ssh ( debian unstable )
cheers
Gary Turner wrote:
I'm trying to get X and cygwin working so that I can ssh into the home
machine from my notebook. I originally set my Linux box to no-listen.
Like some kind of idiot, I
Alvin Oga wrote:
hi oleg
donno about the speifics of the tokyo paper but...
the guy ( christoph ) that runs telemetrybox is a bright guy
and happens to be sorta religious too ...
and he is/was a teacher/professor at a theological university
i like to argue with him (in person), why one can
together or not? If it proves not quite suitable can users revert
easily or not?
MS Word seems to have ironed out most of the problems. Can the same be
said of the debian system?
Grateful for some advice.
John Warrington.
---
[This E-mail was scanned by the Inter.Net.Works Virus Daemon
allocated to it(for me anything under 96MB is unusable)
it is quite entertaining to see 4 virtual machines running at the
same time on my afterstep desktop though! 5 OSs on 1 cpu!(1gb ram)
nate
We found that as well as RAM, a dual proc SMP box helped a great deal
with VMWare.
John P Foster
Senior
it be that you have some salt
air dirtying up the battery terminals? This has been an issue to some
people here (Gold Coast Australia).
John P Foster
Senior Research Scientist
Golden Orb Technologies LTD
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
the Government blame it on the previous Government of 6 years ago.
I'm sure others can extend the story, or provide alternative plots.
John P Foster (not the guy who makes the beer by the way)
Joyce, Matthew wrote:
Righto, I will email Senator Richard 'ludite' Alston and ask him to clarify
.
John P Foster (who besides not being the guy who makes the beer doesnt
believe that a true democracy means that seats in Parliament should be
filled on the basis of some imaginary discrimination that infact
discrimates against those who actually contribute to society)
Higher Ed on True
need the package sysutils installed
John P Foster
Senior Research Scientist
Golden Orb Technologies LTD
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
to
login to that IP to page viststed - note that this doesnt necesarily(sp)
identify who browsed to that page, just who last logged into that
workstation...
Then again I could just be full of it.
John P Foster
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe
newer Rio model, and linux?
Look at:
http://rioutil.sourceforge.net/
This works for my rio800
John
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Should this not be placed in a file in /etc/modutils/... since
/etc/modules.conf is automatically regenerated from all the files in
/etc/modutils/... by update-modules ?? , hmm at least on unstable it is :)
Brad Eisan wrote:
Florian,
I basically read a pile of tutorials online and put these
I had problems with some compiled GTK apps on unstable, which required
different libs ( png problems ),
what i did was get hold of those libs and dropped them into
/usr/local/lib/gtk_fix
i then set up scripts for the couple of programs that need to use those
libs as follows
-
#!/bin/sh
=nano %s #not sure re: quotes vs tick marks
I tried both ways.
Thanks for any input.
John
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
followed the thread, I don't know if you ran:
/usr/share/doc/ogle/examples/install-css.sh*
That would get you a undebian library to run css.
see ya
John
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
There's a gui called downloader for x , it's in unstable anyway
apt-get install d4x
or alternatively download the source and build it yourself
http://www.krasu.ru/soft/chuchelo/
It supports multiple connections for downloads ( iff the other side
allows it of course )
Ive been using it for a long
Sorry, i could not resist.
How about I swap your connection for my 56k modem, guaranteed to slow
all connections down
again, sorry I just could not help myself. :)
cheers
al davis wrote:
With this discussion on a download accelerator ...
What I really need is the opposite. I have a full
as does downloader for x
apt-get install d4x
or
http://www.krasu.ru/soft/chuchelo/
cheers
[EMAIL PROTECTED] wrote:
On Mon, 17 Mar 2003 14:39:18 -0700,
al davis wrote:
With this discussion on a download accelerator ...
What I really need is the opposite. I have a full time
connection. The
, and to blacklist
attempts to dos your server (possibly not completely effective, but I'm
sure it helps, consider it a PART of the solution)
Hope this helps,
John P Foster (not the guy who makes the beer)
Senior Research Scientist
Golden Orb Technologies
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED
of this
stuff, so I cant tell you anymore details. A clever Linux hackor could
probably do it as root via /proc, but I have no idea how to get there.
John P Foster
Senior Research Scientist
Golden Orb Technologies LTD
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe
...
John P Foster
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
, especially since I abhor
so-called win-printers.
I have the HP Photosmart 7350, usb, working through cups the packages:
hpijs 1.5-1 HP Inkjet Server - Ghostscript driver for HP
hpoj 0.91-2 HP OfficeJet Linux driver (hpoj)
So, just in case sonny boy inherits the printer :-)
John
Have you read the Grub howto at
http://www.linuxorbit.com/modules.php?op=modloadname=Sectionsfile=indexre
q=viewarticleartid=539page=1 ?
It helped me. Maybe it'll help you.
J
- Original Message -
From: Jonathan Lassoff [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, December
On Sun, Jun 08, 2003 at 10:14:20AM +0200, Benedict Verheyen wrote:
Hi,
1. How did i break the s key and how do i fix it? I have
knoppix lying around but i have no clue where to search.
I edited /etc/inputrc a while back, got the syntax wrong lost my 's'
key. Drove me nuts!
John
I seem to recall that way back (around 1994, 1995) I found that with a Tekram
IDE
card (set up as secondary IDE controller) I could only see the last drive if I
had it primary on the controller, with the CD as slave. It might be the IDE
controller causing you grief - although I'm surprised if
Hi!
Just an interesting note
We had traceroute and ping disabled on our firewall, and our support guy got
_deluged_ with calls from ppl claiming the server was down 'cos they couldnt
ping it. They had tried to actually use the service it offered of course
(typical lusers!).
So consider what
On Sat, Jul 21, 2001 at 10:36:20AM -0700, John Matters wrote:
i am having a problem. my mouse is not responding at all. When my brother
left (he installed and configured everything) it was working, and then it
just stopped suddenly. its not that the mouse is not plugged in or anything
You can get a debian image at:
http://www.linuxiso.org/
I also installed debian (hamm) as my first linux/unix experience. Took me 3
months to get everything working.
Loved every minute of it.
John
--
-_-_-_-_-_-_-_-_-_-_-
Using [Debian] Linux
_-_-_-_-_-_-_-_-_-_-_
pgpz15iRlIPy0.pgp
Hi,
I installed it on Potato last week. I had to comment out the test for a good
libc, and it segfaults on exit.
But it does work. Come on Woody!
John P Foster
Felix Natter wrote:
hi,
is it possible (with some tricks; libc-update, alien etc.) to run kylix
open edition on Debian 2.2
added it to the one I just upgraded. That got me past the
upgrade
But, then ldconfig c/o /lib/libdb.so.3 was not a link. So I renamed it, then
linked it with libdb.so.3. Works for now anyway.
john
--
-_-_-_-_-_-_-_-_-_-_-
Using [Debian] Linux
_-_-_-_-_-_-_-_-_-_-_
associations.
John
--
-_-_-_-_-_-_-_-_-_-_-
Using [Debian] Linux
_-_-_-_-_-_-_-_-_-_-_
pgpaYLVFYkdSV.pgp
Description: PGP signature
interrupt the boot-up and get to the command
line before being thrown into graphical mode?
I don't remember choosing to start debian with a
graphical interface.
ctl-alt-F1 thru 6 should get you to a console.
Rebooting's a bit drastic :)
John
--
-_-_-_-_-_-_-_-_-_-_-
Using [Debian] Linux
? Or is there a way to do this with out recompiling? I think I'm
only missing the sr_mod.
apt-get install kernel-package
Then in /usr/share/doc/kernel-package there is a README.gz that'll tell
you what to do.
John
--
-_-_-_-_-_-_-_-_-_-_-
Using [Debian] Linux
On Mon, Sep 17, 2001 at 07:15:17AM +0200, Robert Waldner wrote:
On Sun, 16 Sep 2001 21:57:23 PDT, John writes:
On Sun, Sep 16, 2001 at 08:41:21PM -0700, jjheuring wrote:
apt-get install kernel-package
Then in /usr/share/doc/kernel-package there is a README.gz that'll tell
you what
This seems to be a warez site, with lots of S/N for M$ products.
I reported them to the M$ piracy people. Why don't some of you do the
same hehehe?
I hate spammers!
nummers and we'll look at it.
Sven
I get the same message on bootup. The one line reads:
Starting profesional ftp daemon - No certificate files found!
Running Daemon mode, Sid box,
ii proftpd1.2.2-1
with stock proftpd.conf
John
--
Sven Hoexter Earth
file I used:
--
#!/bin/sh
exec icewm-gnome
-
if this doesn't work, rename your .xinitrc file to .xsession. One of
those should work :)
Or remove enlightenment.
John
Then, I followed the guidance of Shawn Lamson. I
created /home/.xsession
Hello,
Is there anyone out there who has managed to get drbd to work well(1)
with potato. I'm having problems making sense of the documentation.
Thanx,
John P Foster
(1) well meaning with heartbeat.
Hi all,
I get this strange error when attempting to ssh to our name server. The
connection comes and goes so fast, but when I do eventually get in (took
5 tries this time, I show the last 3):
Mar 20 09:29:28 ns sshd[3879]: Accepted rsa for john from 203.45.165.254
port 40476
Mar 20 09:29:28 ns
: 0, stackpage=c02d5d98)
Can anyone shed loight on this, or point to a URL that would help me?
thanx,
John P Foster
Hey there, I found a great retail site with all kinds of products. Home
decor, office decor, travel, outdoors, kitchen, etc... Take a look around
at http://www.merchandisewholesale.com just click on the images of the
product to enlarge it for a better view.
Sincerely,
John
1.
I Have a lexmark 3200 printer. Using Kups, i configured my printer. The
cupsomatic driver doesnt work at all, and the gimp print will print, but with
some problems.
When i tried to print a test page, it got about a quarter way down the page,
then stopped, the head moved all the way to the
On Wednesday 06 June 2001 13:58, Miguel Griffa wrote:
At 07:20 p.m. 06/06/01 +0100, Peter Paul Millard wrote:
Hello All
I have the above card which fails to get started.
Storm does not have it on the web site as supported
progeny debian also said that they have had problems with all SiS
On Tuesday 05 June 2001 17:20, R. Jorge wrote:
I have install debian GNU/Linux.
I type login - root then I type the password and after that the next
line comes like that:
debian:~#
I don't no what I have to do can you please help me?
did you read the newbie help before you
On Monday 04 June 2001 18:45, Wayne Topa wrote:
Subject: Re: How can i get my printer to work??
Date: Mon, Jun 04, 2001 at 03:26:25PM -0500
In reply to:John Hughes
Quoting John Hughes([EMAIL PROTECTED]):
Subject: Re: How can i get my printer to work??
Date: Sat, Jun 02, 2001
On Friday 08 June 2001 10:18, Sebastian Canagaratna wrote:
Hi:
Are there any programs around for linux which provide the sort of
programming environment given by Microsoft Visual Basic and Visual
C++?
Thanks
Sebastian
On Saturday 09 June 2001 07:04, Anthony Campbell wrote:
Is there anything for Linux that provides at least some of the
facilities of Powerpoint?
Try Kpresenter. looks pretty good.
using Grub, my linux entry looks like this:
title Debian kernel 2.4.5-k6
root (hd0,1)
kernel /boot/vmlinuz-2.4.5-k6 root = /dev/hda2 ro idebus=66 hdd=ide-scsi
initrd /boot/initrd-2.4.5-k6
however, when it boots, it does not set idebus to 66, it defaults to 33, and
tells me to add idebus=xx,
On Sunday 10 June 2001 05:17, Blue Rat wrote:
Basically, it all boils down to finding the driver for this printer. The
page at linuxprinting.org looks pretty discouraging and doesn't offer an
actual link to anything but the Canon homepage, where they have drivers
for every brand of winbloze
On Wednesday 13 June 2001 00:26, Sachin Garg wrote:
A paperless office has about as much chance as a paperless bathroom.
We have paperless bathrooms in the Indian subcontinent :)
Sorry, couldn't help myself ...
Dont forget those automatic Japanese toilets with the water sprays.
On Thursday 14 June 2001 22:30, Ian Perry wrote:
Is it possible to run Microsoft Windows Apps (such as Excel etc) in
XWindows or is there a utility which allows this ?
Ian
VMware, win4lin, and wine. (wine is the only free one)
but before you decide to use windows programs, why not see if
proccess wise memory usage, but the linux kernel has
support for up to 64 GB of ram. (a lot)
John
not be found.
Microjerks turned smb proprietary with win2k. but its still an odd problem
you have. with my LAN, i can access the linux box's SMB shares fine, but the
linux box is denied access to the win2k shares. Just because win2k doesnt
play very nicely.
John
getting
a new one, with absolutely no downtime. It was kinda nice in the winter
actually, kept my feet warm :)
John
On Saturday 16 June 2001 12:55, Christopher W. Aiken wrote:
I know this is a Debian news group, but the networking stuff
should be Linux platform independant. Right?
We just had a new Intel Itanium IA64 file server installed at the
office. I installed TurboLinux ( O/S came with system ).
Ill tell you right now. DONT GET INTEL CPUS. they are horrid now-a-days. AMD
chips are based off of newer architecture, have 33% more on-chip chache, and
can run at even 266mhz system bus, as opposed to only 133mhz p3. Athlons also
have 3 Floating point pipelines, as opposed to p3's 1.
all of
This is true, most Windows users haven't bothered to (re)install their OS.
not really... i find i need to format and reinstall windows every few months.
it becomes unuseable by then.
i also find that people who dont do this, start out with a nice fresh new
computer, and by the end of 5
, and find the best, is to decide what you wanted
to do ,(in my case, figure out QGL) find the source to a simple example, and
then create your own simpler project. Learn how to copy and past, and in the
process learn the topic, and get some kind of app out of it.
John
Matt,
I can't remember the exact URL, but somewhere in the IBM developer forums is a
really good tutorial on using iptables to create a firewall. It includes some
nice scripts, and is much clearer than Rusty's guides.
John P Foster
http://www.golden-orb.com
Matthew Garman wrote:
I would like
on the idea.
And yes, OE and Mac does seem like some kind of unholy alliance 8^).
Thanks for your patience, and I apologise again for the offtopic post
(even though it is on a potato box).
John P Foster
http://www.golden-orb.com
When I run modconf:
zork:/# modconf
zork:/#
This is on sid with:
Linux zork 2.4.9 #1 Sat Sep 8 10:29:35 PDT 2001 i586 unknown
Not sure what more info you need. I do have a strace file at:
www.bagdanoff.com
John
PS:
Viewing the modconf.txt works with mozilla konqueror, but not on
netscape
On Mon, Nov 12, 2001 at 04:40:10AM -0800, Paul 'Baloo' Johnson wrote:
On Sun, 11 Nov 2001, John wrote:
Thanks!!
Although I had to replace REJECT with DROP.
Why's that?
Using REJECT I kept getting:
iptables: No chain/target/match by that name
when restarting ipmasq.
Did I forget
.)
At the recent SEAQ Conference on the Gold Coast here in Queensland I had the
opportunity to talk to Prof John
Gough (Inventer of Modula 2) , who designed the Object Pascal port for dotNET,
and was a core consultant on
Project 7 (which was the RD behind dotNET).
Interestingly enough the CLR
run Evercrack in
Linux I can blow Windows off my games machine completely.
my 2 cents,
John Foster
501 - 600 of 15482 matches
Mail list logo
