Exim (Woody) smarthost using authenicated ssmtp

Hello: I searched the archives but didn't find anything that solved or helped my situation and yes, I've RTFM, or parts of it. grin I'm using Rogers Cable HighSpeed, and they require all outbound smtp to be authenticated using SMTP AUTH LOGIN. I can't figure out the syntax to use. I do have

exim4 config help

Hello: I'm attempting to configure 'exim4 daemon heavy' to deliver mail via a smarthost. When setting up the configuration via 'dpkg-reconfigure exim4-config' I selected the 'monolithic' option. However I can't find a exim4-config file anywhere after doing so in order to edit it -- That's my

Re: upgrading kernel 2.2.20-idepci

OK, did the upgrade and I am booted into a new 2.4.x kernel. The only problem is that the new kernel, doesn't recognize my ethernet card eth0, so I don't have a network on the Debian box. Is there any way to fix this? I did modprobe for Realtek (which I believe is my card) but there aren't any

kernel panic

Hello Folks: I'm desperate -- Previous to this morning I had the install bf24 kernel installed. I read on another list that basically it's intended for the install process only and should be replaced for adequate performance. So, I took the plunge and installed '2.4.18.img' and ran lilo

Re: kernel panic

Jonathan Schmitt wrote: Hallo So, I took the plunge and installed '2.4.18.img' and ran lilo afterwards. Lilo gave an error on the stanza I added to lilo as per the debian installer instructions: I think it was the 'initrd=/initrd.img' line. I obviously added it to the wrong place. You

Re: kernel panic

Jonathan Schmitt wrote: snip You should always keep the old kernel in Your bootmenu to prevent such things, this is, what the construct with /vmlinuz and /vmlinuz.old is for. Yes, however, I didn't delete anything... When I was working in Lilo previous to the 'accident', the old config was

Re: kernel panic

[EMAIL PROTECTED] wrote: Yes. Your simplest option (going from memory here) is to boot off the CD again, choose the bf24 kernel, skip the majority of the configuration options, opting instead for mount previous installation, install lilo, and reboot - then you should be back in bussiness. NOTE:

Re: Apt trusted.gpg file problems

On Sun, Mar 26, 2017 at 09:03:31AM +, Miltiades Vasiliades wrote: > I tried switching the mirrors through synaptic then synaptic as usual asked > to refresh however the refresh ended with the following errors > > W: http://repo.steampowered.com/steam/dists/precise/InRelease: The key(s) in >

Re: Sound Problem

On Sat, Mar 11, 2017 at 10:36:54PM +, Dominic Knight wrote: > As you most likely have two sound cards, one on-board and one with the > video card (HDMI) it may be worthwhile installing pasystray as this may > give you better control over which card you want to use, lots of > options to reset

Re: Problems with apt in a clean stretch install.

On Tue, Jul 04, 2017 at 08:17:53PM +0930, Wayne Hartell wrote: Er ... sorry that last email should read " Phil Wyett's suggestion" in this thread.

Re: Problems with apt in a clean stretch install.

On Tue, Jul 04, 2017 at 08:17:53PM +0930, Wayne Hartell wrote: > Thanks. Yeah I have tried importing keys (even though they already exist > as confirmed with 'apt-key list' and it makes no difference. All the keys > complained about are already present. > > I don't have enough experience nor

Re: Replace systemd

On Tue, Jul 04, 2017 at 07:33:25PM -0500, John Hasler wrote: > Jimmy Johnson writes: > > Funny, that sounds like something a Slack'er would say. Patrick, we > > are not all keyboard wizards like you and that other Patrick who can > > keyboard faster than I can read. That's a compliment on your

Re: FossaMail

On Wed, May 03, 2017 at 07:21:16PM -0400, Stephen P. Molnar wrote: > Dose anyone have a installation copy of FossaMail that they would be willing > to share? Ugh, just noticed my previous post was for MSFT - The only download I was able to find for Linux, is this:

Re: FossaMail

On Wed, May 03, 2017 at 07:21:16PM -0400, Stephen P. Molnar wrote: > Dose anyone have a installation copy of FossaMail that they would be willing > to share? > > Thanks in advance. Stephen, appears to still be available here:

Re: Update Notifier

On Fri, May 05, 2017 at 04:32:44PM +, sare...@att.net wrote: > Why doesn't Debian 8 Cinnamon notify when updates are ready to install after > all these years Debian has existed? Don't tell me there is one, because after > installing Debian I waited a long time to see if a notification would

Re: How stable is the frozen stretch?

On Tue, May 16, 2017 at 08:50:45AM -0500, Richard Owlett wrote: > > *ROFL!* ;/ > I've been a computer _user_ for a half-century. > About 5 years ago I started seriously plotting my escape from the gloppy GUI > of an organization recently in the news. > I investigated "Linux from Scratch",

Re: quasi-SOLVED: Re: no network after jessie -> stretch

On Fri, Jun 23, 2017 at 05:37:29PM -0400, Fungi4All wrote: > From: doc.ev...@gmail.com > To: debian-user@lists.debian.org > Fungi4All wrote on 06/22/2017 09:48 PM: > >> From: doc.ev...@gmail.com > >> To: debian-user@lists.debian.org > >>

Re: switching flavors

On Wed, Jun 07, 2017 at 08:57:40AM +0900, Mark Fletcher wrote: > On Tue, Jun 06, 2017 at 04:55:01PM -0400, SDA wrote: > > On Sun, Jun 04, 2017 at 06:44:10PM +0100, Joe wrote: > > > On Sun, 4 Jun 2017 12:20:51 -0400 > > > SDA <marathon.duran...@gmail.com> wrote: &g

Re: switching flavors

On Sun, Jun 04, 2017 at 04:20:02PM +1000, Davor Balder wrote: > Yes - and based on some work I did earlier in the week if you keep the > things simple I would say your upgrade should be uneventful. > > I changed the repo to unstable > > Then I did: > > apt-get update > > apt-get upgrade > >

Re: (abort)Re: why can't I visit this web site

On Wed, Jun 07, 2017 at 05:30:05AM +0800, Long Wind wrote: > Thank Thomas! > I disable javascript, but it still display nothing. > > the web site is in Chinese, use Unicode > > my energy is limited,I give up > Thank all those who reply! I posted a link to what the page looks like as a webm

Re: switching flavors

On Sun, Jun 04, 2017 at 06:44:10PM +0100, Joe wrote: > On Sun, 4 Jun 2017 12:20:51 -0400 > SDA <marathon.duran...@gmail.com> wrote: > > > On Sun, Jun 04, 2017 at 04:20:02PM +1000, Davor Balder wrote: > > > Yes - and based on some work I did earlier in the week if yo

Re: why can't I visit this web site

On Tue, Jun 06, 2017 at 09:31:26AM +0800, Long Wind wrote: >i am not at home and can't use debian pc >my problem is like Richard's description >it loads sth., but display nothing >thanks! Here is a screen recording of what that abomination of a web page looks like.

Facebook Engineer Comments After Using systemd 1 Year Later

Thought it might be worthwhile to understand how systemd helps the large enterprise. https://media.ccc.de/v/ASG2017-126-systemd_facebook_a_year_later

Re: Android Debian - Lets start Debian for Android hw phones

On Wed, Jan 03, 2018 at 12:25:50AM +0100, Anders Andersson wrote: > On Tue, Jan 2, 2018 at 5:50 PM, Samuel wrote: > > could you add a support for wiko > > I have a wiko lenny 4 plus > > Sure! Probably a small job. I'll submit a patch tomorrow to port > debian to android. >

Re: [OFFTOPIC] Re: "Meltdown" and "Spectre": Every modern processor has unfixable security flaws

Show who you're quoting with an attribution line, please!

Re: Problem using "dpkg -i"

On Mon, Jan 15, 2018 at 01:23:30PM -0600, Richard Owlett wrote: > On 01/15/2018 11:38 AM, Sven Joachim wrote: > > On 2018-01-15 01:32 -0600, Richard Owlett wrote: > > > [snip] > > > 2. Is there a recommended HTML editor in the repository that" > > > A. simple UI > > > B. can render the

Re: update bios from debian

On Thu, Mar 08, 2018 at 03:38:58PM +0100, Sven Hoexter wrote: > On Wed, Mar 07, 2018 at 09:22:06PM -0800, Don Armstrong wrote: > > Hi, > > > sudo apt install grub-imageboot; > > sudo cp 7wuj43uc.iso /boot/images; > > sudo update-grub2; > > > > then reboot, and select the right cd image in your

Re: Scribus has stopped importing PDF files - repost - original thread was hijacked

On Wed, Sep 26, 2018 at 02:45:18PM -0400, Gary Dale wrote: > For the last few days, some Scribus documents I work with have stopped > accepting PDF files within image frames. Prior to this, they would display a > preview. Now new image frames that I create show just the file name, but > some older

Re: On improving mailing list [was: How to Boot Linux ISO Images Directly From Your Hard Drive Debian]

On Mon, Aug 16, 2021 at 03:01:43PM +0100, Jonathan Dowland wrote: > On Mon, Aug 16, 2021 at 08:26:34AM -0400, SDA wrote: > > BTW there has been an off-topic list introduced by a community member, > > but it seems has had little uptake. > > I looked into this the other day,

Re: On improving mailing list [was: How to Boot Linux ISO Images Directly From Your Hard Drive Debian]

On Mon, Aug 09, 2021 at 06:05:58PM -0700, Weaver wrote: > I'm afraid this conversation is a waste of time. > The goal posts are moved around at convenience, rather in than any > serious manner at resolving an issue that is minor, if even existent. > Cheers! > > Harry. Oh it exists Harry! I've

Libinput Error

Hi, I've been getting the following messages in the journal-log even before I installed Debian 11. Could someone help decipher them for me? I have each device plugged into USB v 3.x USB buses as that's all my motherboard supports. Is the message saying that the device's are too slow being that

[marathon.duran...@gmail.com: Libinput Error]

Resending, didn't make it to the list for some reason. - Forwarded message from SDA - Date: Sat, 21 Aug 2021 13:38:12 -0400 From: SDA Subject: Libinput Error To: debian-user@lists.debian.org Hi, I've been getting the following messages in the journal-log even before I installed Debian

KODI won't start on SID

Hi, Since Thursday I'm having this issue on SID /usr/lib/x86_64-linux-gnu/kodi/kodi.bin: symbol lookup error: /usr/lib/x86_64-linux-gnu/kodi/kodi.bin: undefined symbol: +_ZN7wayland9display_t12create_queueEv Any ideas?

Appstream-cli warning

Hey gurus, I'm getting the following message for some time and am wondering if it's safe to remove the icon? Only seems to happen when I update apt repos from the cli. Thanks. ** (appstreamcli:42191): WARNING **: 17:05:19.451: Found icon of unknown type 'unknown' in

Re: Kodi (SID)

Here is the deets for my report: Bug#1004214. Please add any additional information to the report itself if you suffer from same issue. Thanks!

Kodi (SID)

Greetings! The past week or so, up until today Kodi has been segfaulting on me - Anyone else? Starting from a term: failed to open zone.tab libva info: VA-API version 1.13.0 libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/r600_drv_video.so libva info: Found init function

Re: Kodi (SID)

On Sun, Jan 23, 2022 at 09:47:31AM +0100, Andrei POPESCU wrote: > On Sb, 22 ian 22, 15:41:37, SDA wrote: > > Greetings! > > > > The past week or so, up until today Kodi has been segfaulting on me - > > Anyone > > else? > > Starting from a term: > >

[marathon.duran...@gmail.com: Re: Unsolicited GNU bc patch]

- Forwarded message from SDA - Date: Thu, 4 Aug 2022 20:37:47 -0400 From: SDA Subject: Re: Unsolicited GNU bc patch To: debian-user@lists.debian.org On Sat, Jul 30, 2022 at 07:29:23AM +, Thomas DiModica wrote: Hi, Thomas. I'd send this to the debian-developer email list rather

Re: Unsolicited GNU bc patch

On Sat, Jul 30, 2022 at 07:29:23AM +, Thomas DiModica wrote: Hi, Thomas. I'd send this to the debian-developer email list rather than this user list. Not sure if any developers are lurking here ... > Greetings, > > I don't remember how or why I initially stumbled across this bug report >