Ralf Mardorf wrote:
On Tue, 2012-09-18 at 00:27 -0400, Kamaraju S Kusumanchi wrote:
/dev/sdb: unrecognised disk label
2) Is msdos a valid option to choose for this hard drive?
Yes it is.
Is there some output if you run
# parted /dev/sdb
mklabel msdos
So, I did
$sudo parted /dev
lee wrote:
Kamaraju S Kusumanchi raju.mailingli...@gmail.com writes:
I am trying to parition a new Western Digital WD Scorpio Black 750 GB
SATA 3 GB/s 7200 RPM 16 MB Cache Internal Bulk/OEM 2.5-Inch Mobile Hard
Drive but with no success.
$sudo fdisk -l /dev/sdb
Disk /dev/sdb: 750.2 GB
label
on the command line.
1) What am I doing wrong?
2) Is msdos a valid option to choose for this hard drive?
3) Here I connected the hard drive via a USB connection. Could that be a
problem? Should I connect the drive directly via SATA cable in order to
partition?
thanks
raju
--
Kamaraju S
attaching smartctl_20120912 as http://pastebin.com/L5gRvQPV . This
file is generated by
$ sudo smartctl -a /dev/sda smartctl_20120912
This is a hard drive in Dell Inspiron E1505 laptop. Any help is greatly
appreciated.
thanks
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com
lee wrote:
Kamaraju S Kusumanchi raju.mailingli...@gmail.com writes:
When I ran
$sudo e2fsck -c -c -f -v /dev/sdb7
I am getting a lot of errors such as
Error reading block 18022401 (Attempt to read block from filesystem
resulted
in short read) while reading inode and block bitmaps
] FAT-fs (sdb7): bogus number of reserved sectors
I am sorry I am a bit naive when it comes to hard drive failures. Any help I
can get is appreciated.
thanks
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
Sthu Deus wrote:
You will not be able to do so until You connect Your drive to computer
directly - i.e. through PATA/SATA cable.
This is an external USB hard drive. The only connection it has is USB. So, I
guess in this case smartctl is not much useful.
--
Kamaraju S Kusumanchi
http
Camaleón wrote:
On Thu, 30 Aug 2012 11:07:15 -0400, Kamaraju S Kusumanchi wrote:
One of the partitions on my hard drive has badblocks. I did a
$sudo e2fsck -c -c -f -v /dev/sdb7
on it and it found 757 badblocks. The partition itself is 100 GB and
only 18 GB of it is filled. Now my
.
And You can not disassemble it?
May be I am missing something here. The USB hard drive I am talking is very
similar to http://www.amazon.com/Iomega-Prestige-Portable-
SuperSpeed-35192/dp/B004NIAG5E/ref=cm_cr_pr_product_top . The case can't be
removed.
raju
--
Kamaraju S Kusumanchi
http
Dan Ritter wrote:
On Tue, Aug 28, 2012 at 09:28:20AM -0400, Kamaraju S Kusumanchi wrote:
4) What might have caused this problem and how to prevent it in the
future?
I don't know, but in my experience, USB-connected hard disks
suffer these problems much more than PATA/SATA/eSATA/SCSI/SAS
Go Linux wrote:
--- On Thu, 8/30/12, Kamaraju S Kusumanchi raju.mailingli...@gmail.com
wrote: I guess iOmega drives are not very stable.
I guess iOmega drives are not very stable.
I have several external drives from iOmega that are a few years old. But
the drives inside the enclosure
or is there a
better way?
3) Is the drive going bad and need to be replaced?
4) What might have caused this problem and how to prevent it in the future?
5) Is the filesystem on this partition corrupted?
thanks
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email
Martin Steigerwald wrote:
Am Montag, 13. August 2012 schrieb Kamaraju S Kusumanchi:
I am using a mixture of stable + testing (Squeeze + Lenny), knode
version 4.4.11, KDE 4.8.4,
I hope you aren´t serious or there is a typo in above. In a way that means
that there is no Lenny involved
Kamaraju S Kusumanchi wrote:
I am using knode as the news reader to read messages from this group via
gmane. I can use some help regarding the following issue.
If I am in the middle/beginning of a message, I can keep pressing space to
go to the end of the message and the next space key
it mean that knode under GNOME does
not have this problem or Pan under GNOME does not have this problem? What
version of knode have you tested this?
thanks
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
space advance
to the next message all the times?
I am using a mixture of stable + testing (Squeeze + Lenny), knode version
4.4.11, KDE 4.8.4,
$uname -a
Linux kusumanchi.mae.cornell.edu 3.0.0-1-686-pae #1 SMP Sat Aug 27 16:41:03
UTC 2011 i686 GNU/Linux
thanks
raju
--
Kamaraju S Kusumanchi
http
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/jqei7f$vvk$1...@dough.gmane.org
blog
http://malayamaarutham.blogspot.com/2010/08/recover-accidentally-
overwritten.html
hope that helps
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
-5.12.4
which is a virtual package.
The following actions will resolve these dependencies:
Remove the following packages: list of 144 packages
Do an apt-get update and then try the apt-get install make gcc build-
essential command?
--
Kamaraju S Kusumanchi
http
but is of no help. Any other comments/suggestions
to look into before I give up?
thanks
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive
/01/msg01297.html , I
do not see any CC. Care to elaborate?
On 17/01/12 12:49, Kamaraju S Kusumanchi wrote:
After logging into a windows 7 machine, I connect to a Debian stable
machine by ssh via putty (0.62). Now I fire up matlab (7.9.1.671 R2009b)
from the Linux machine.
The problem
Scott Ferguson wrote:
Care to elaborate?
From the header:-
To: debian-user@lists.debian.org
From: Kamaraju S Kusumanchi raju.mailingli...@gmail.com
Subject: OT: cannot copy text from matlab to putty
Followup-To: gmane.linux.debian.user
Which means debian-user list subscribers
helped me. There is no help page for this router. Did anyone get this
working or is my best choice to buy another router?
thanks for any help
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject
Bob Proulx wrote:
Kamaraju S Kusumanchi wrote:
In snapshot3.jpeg, the field (1) Enter a name for the custom service:
can be any random name. But what about (2)? Should I choose Port
Forwarding or Port Triggering.
Select Port Forwarding. Port Triggering is used to dynamically make
of cases.
The various posts on the internet suggested that Verizon blocks port 80. To
eliminate that, I was using 8088. I just now checked... the web server works
on port 80 too!
Thanks for all the help.
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE
topic... is that the route to take?
If so, what do you recommend for each?
thanks in advance
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
installed. I'd like to file a bug. But not sure on the package
name.
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http
, the command gets killed.
ctrl-d does not seem to have any effect.
thanks
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http
* apt-file search /path/to/file
* dlocate -S /path/to/file
another way is
wajig whichpkg /path/to/file
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
kama
raju
k a m a
r a j u
kama
raju
I am wondering if there is a way to rewrite the names variable in stanza2
such that the output from stanza 1 and stanza 2 are the same.
thanks in advance
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com
port=twisted pair
resources: irq:17 memory:df9fe000-df9f
thanks
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive
Brian wrote:
On Mon 09 May 2011 at 08:20:00 -0400, Kamaraju S Kusumanchi wrote:
$cat /etc/network/interfaces | grep -v ^# | grep -v ^$
auto lo
iface lo inet loopback
auto wlan0
iface wlan0 inet dhcp
wpa-conf managed
wpa-ssid munge1
wpa-key-mgmt WPA-PSK
wpa-psk munge2
I think
like a way for my system to not store my password scheme. I'd
prefer something better than editing my history file.
In bash, If I prepend the command with a space character, it does not show
up in the ~/.bash_history file.
hth
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com
connection
[028:684] Waiting for GoogleTalkPlugin to start...
Has anyone got the google talk plugin working in Debian? Any
ideas/suggestion/comments are most welcome.
thanks
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ
bruno wrote:
Kamaraju S Kusumanchi wrote:
I connect my PCs to internet via Verizon DSL router. When I go to
192.168.1.1 in a browser (say firefox), I am able to see all the
computers connected to this router.
However, from command line is there any way to probe for the list of IP
ii weather-util1.5-1 command-line tool to
obtain weather conditions and forecasts
thanks
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe
Dom wrote:
On 25/04/11 07:16, Kamaraju S Kusumanchi wrote:
I just had a look at the Weather homepage:
http://fungi.yuggoth.org/weather/
and it looks like the format of the request and data has changed. There
is a partial fix on that page, and a new version of Weather is being
worked
?
thanks
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/ip1kg7$juc$1...@dough.gmane.org
seconds
The 192.168.1.36 is my vonage phone connection. I am unable to ping it
either. However, my phone works so the connection must be alive.
Any other ideas?
thanks
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/ihiiab$36f$1...@dough.gmane.org
that, during the
reboot, the new KDE libraries got loaded which must have fixed the issue.
thanks
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
buttons ('yes', 'no'). But now, I am not seeing
any windows. The program just seems to hang. Any idea as to what might be
happening?
Using a mix of Lenny and Squeeze.
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ
the machine
does not run X?
thanks
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/ibmvp2$v9
not involve
any. I am wondering if there is a way at the OS (or shell) level solution to
remap '-', '_' one to another so that typing '_' does not involve holding
shift key but typing '-' does.
Any ideas/comments/suggestions/pointers etc.,?
thanks
raju
--
Kamaraju S Kusumanchi
http
Andrei Popescu wrote:
ii xserver-xorg-video-radeon1:6.13.1-2
X.Org X server -- AMD/ATI Radeon display driver
You need a newer kernel, probably the one from squeeze.
Could you please elaborate why I need a new kernel? Where is the
incompatibility?
thanks
--
Kamaraju S
not understand people's itch to install the latest version.
Just because it has a high version number does not mean it is more secure.
regards
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe
Video Device
EndSection
Section Monitor
Identifier Configured Monitor
EndSection
Section Screen
Identifier Default Screen
Monitor Configured Monitor
EndSection
thanks
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE
John wrote:
I wonder why the linux driver for one of the oldest standard wifi
cards (Cisco aironet) doesn't work properly, but Windows does. Don't
see that too often.
John
If there is room for experimentation, I'd install a newer kernel and see if
the problem goes away.
--
Kamaraju S
John wrote:
Or, putting it another way, what can I type from the command line to
do the same network restart as if I was rebooting.
After doing the ifup thing, run the following command (as root) and see if
it helps.
# /etc/init.d/networking restart
--
Kamaraju S Kusumanchi
http
Camaleón wrote:
On Fri, 10 Sep 2010 20:15:48 -0400, Kamaraju S Kusumanchi wrote:
My dmesg is full of the following messages
[155328.289189] wlan0: CTS protection enabled (BSSID=00:23:97:5c:5f:e0)
[155337.336369] wlan0: CTS protection disabled (BSSID=00:23:97:5c:5f:e0)
(...)
Check
configuration: broadcast=yes driver=iwl3945 ip=192.168.1.21
latency=0 multicast=yes wireless=IEEE 802.11
resources: irq:220 memory:dfcff000-dfcf
I am connected to internet wirelessly via verizon broadband router.
thanks
raju
--
Kamaraju S Kusumanchi
http
production machines serving users should be running stable, the raison
d'etre of debian. Sorry.
Here you go! Production machines serving users should be running stable!
That's not a joke. There is a reason why Debian 'releases' stable.
raju
--
Kamaraju S Kusumanchi
http
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/i4pupo$e8...@dough.gmane.org
Memnon Anon wrote:
Kamaraju S Kusumanchi raju.mailingli...@gmail.com writes:
While running cfdisk, it lists various file system types. Is there a
document which explains the difference between similar file systems?
[...]
Similarly, If I want to create FAT32 partition so that I can exchange
Using Squeeze, konqueror Version 4.4.5 (KDE 4.4.5).
If I do konqueror - F9 - click on storage media link in the left tab, an
error pops up saying protocol not supported media
Anyone know how to fix that?
thanks
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com
.
hth
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/i3d0c4$fp...@dough.gmane.org
Jordan Metzmeier wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On 08/03/2010 08:57 PM, Kamaraju S Kusumanchi wrote:
I always start upgrading well before the new release is made. I start by
upgrading the packages that I use most of the time (ex:- iceweasel, vim,
konsole, knode
:- iceweasel, vim,
konsole, knode etc.,). That way if there is a problem I can report the bugs
and have them fixed before the release is actually made.
YMMV
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
can change the title of the tabs. I am looking for a
similar short cut for the whole konsole window. Possible?
Using Debian Lenny, KDE 3.5.10, Konsole 1.6.6
thanks in advance
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ
think LD_LIBRARY_PATH is what you are after. Also take a look at -B option
of gcc.
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Hashimoto wrote:
Hey,
Thank you for your suggestion, I'm gonna check some other models of
these laptop's base.
But you also have a AMD processor?
Please refrain from top posting.
No, the machine has Intel T2500 2.0 GHz Dual Core.
raju
--
Kamaraju S Kusumanchi
http
? What is the
output of ifconfig?
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
): 126 C
I am in no way associated with Targus and I heartily recommend this option.
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
and just installed
the unstable libc6-dev.
You could have done something like
sudo apt-get install libc6-dev=2.7-18 gfortran=4:4.3.2-2
(I think) That will downgrade your libc6-dev, gfortran as necessary.
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE
-iwlwifi 0.14+lenny2
Binary firmware for Intel Wireless 3945 and 4965
Using Lenny, up to date with all the security updates etc.,
thanks in advance
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
,
powerpc, s390, sparc
iceweasel |3.5.1-1 | experimental | source, alpha, amd64, hppa, i386,
ia64, powerpc, s390, sparc
hth
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble
at
http://the.earth.li/~sgtatham/putty/0.60/puttydoc.txt (I found this link by
googling) in section 3.4.
hth
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
., But I do not rush to
upgrade to the latest KDE apps. YMMV.
hth
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
is useless. For browsing, emails, reading pdfs
etc., I use GUI based systems.
Both have its advantages, disadvantages. The trick is to make the right
choice.
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
. Less newbie posts. Ubuntu?
I think so. But I am also glad that it is that way.
7. Less spam.
Totally with you on that. The mailing list managers deserve kudos for doing
such a great job.
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian
.
hth
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
ml ml wrote:
Hello List,
i need file version 5.x on my system. But Debian etch comes with file
version 4.17.
How do i install 5.x (from source) without messing up my system?
ETCH is old. Is upgrading to the latest stable version (LENNY) not an
option?
raju
--
Kamaraju S Kusumanchi
Ron Johnson wrote:
Put this in your .bashrc :
calc() { perl -e print ''.($*).\\\n\; }
$ calc 4 \* 7
28
What a cool hack! Thanks for sharing.
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
the tools, commands to achieve this. Sorry! Google might be of some
help.
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Douglas A. Tutty wrote:
On Mon, Jun 22, 2009 at 08:17:44PM -0400, Kamaraju S Kusumanchi wrote:
Currently I have a shell script that works as below.
1) launch proga, progb in the background using nohup.
2) Ask proga, progb to write a file when they finish.
3) Every five minutes check
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Scott Gifford wrote:
Kamaraju S Kusumanchi raju.mailingli...@gmail.com writes:
[...]
progc should to be launched only after both proga, progb are finished.
progc takes another couple of hours to finish.
What is good way to automate this problem (that is no manual
interaction
wait function.
regards
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
, progc). Then the ps
+ grep logic will grep for proga, progb from both the sets. That is why I
shifted to writing a file at the end.
In any case, thanks for the reply.
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ
without perl and python? which is the proper desktop manager?
thanks
How does having python, perl installed will affect your c/c++ programmes? I
am just curious.
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
Jeffrey Cao wrote:
Do you boot into the same OS with the same kernel?
It's the driver who is responsible for the interface name.
Yes. Same OS, same kernel.
raju
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
.
$dmesg | grep wlan0 | wc -l
209
The log file
$dmesg | grep wlan0 wlan0.messages
is attached. Is this kind of association/disassociation normal? I have not
seen that when I was using ipw3945.
thanks
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
[ 16.190483] wlan0
udev but
removing udev also wants to remove the kernel (linux-image) package(s). So
are there any other work arounds?
thanks
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe
options and see if there is any change in the final results.
hth
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
version of
gnucash.
hth
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
like
nohup make 21 | tee make.log
That way the program runs in the background, output is redirected to a file,
compilation goes on even after log out.
hth
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
Kamaraju S Kusumanchi wrote:
When trying to start a game from http://apps.facebook.com/texas_holdem/ ,
the flash application hangs with a message Loading 20 of 20. Any idea
what flash packages I need to install/uninstall or in general what I have
to do to get this working?
Using Lenny
Star Liu wrote:
I'm looking for a free software which can draw 3D picture if I setup
mathmetical equations and specify its scope, it's an important part of
my current project. thanks!
Check out open DX (open source), tecplot (commercial) as well.
raju
--
Kamaraju S Kusumanchi
http
/sources.list
thanks in advance
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
enabled? Also look under :h fortran for some
tips on configuring for fixed form, free form source code.
hth
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
-Dougherty/dp/1565922255/ . It's so
far the best documentation I read on sed, awk. It also has lots of
practical tips.
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
is
a problem to run on x86_64 -- but I have no clue about how to get xpdf
working again. (Yes, I have tried reinstalling it.)
If it is repeatable with any pdf file, please file a bug. If the problem is
specific to one pdf file, then look at how it was created.
raju
--
Kamaraju S Kusumanchi
http
this
up on d-u.
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
(especially after pressing tab 2 times for possible list of
completions). I'd go for a different name.
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
are not the correct investment for a long term reliable
laptop.
hth
raju
--
Kamaraju S Kusumanchi
http://www.people.cornell.edu/pages/kk288/
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas
Carl Fink wrote:
On Thu, Jan 01, 2009 at 02:00:49PM -0500, Kamaraju S Kusumanchi wrote:
As for the video card, if I play a flash based movie in windows XP, there
will be a blue screen memory map error after some time. FWIW, the
movies work fine in Linux. I searched in google
while watching a flash video it can
occur at 35th minute sometimes it can show up at 7th minute. Sometimes it
might not even show up after the full video (say 60 minutes). The videos
play fine in Linux.
raju
--
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/
--
To UNSUBSCRIBE, email
1 - 100 of 554 matches
Mail list logo