1) The man page of smartctl is not much helpful in figuring out what various 
fields in the output of "smartctl -a" stand for. For example, what does 
fields such as Raw_Read_Error_Rate, Seek_Error_Rate, Hardware_ECC_Recovered, 
Multi_Zone_Error_Rate mean? Is there any page that describes all these 
fields in good detail?

2) Can someone please tell me if this hard drive is dying. The following is 
the difference between two smartctl outputs that are a week apart.

$diff smartctl_20120905 smartctl_20120912 
14c14
< Local Time is:    Wed Sep  5 21:55:18 2012 EDT
---
> Local Time is:    Wed Sep 12 20:03:10 2012 EDT
58c58
<   1 Raw_Read_Error_Rate     0x000f   100   100   046    Pre-fail  Always      
 
-       74727
---
>   1 Raw_Read_Error_Rate     0x000f   100   100   046    Pre-fail  Always      
>  
-       108562
61c61
<   4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always      
 
-       2242
---
>   4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always      
>  
-       2244
63c63
<   7 Seek_Error_Rate         0x000e   100   100   000    Old_age   Always      
 
-       1872
---
>   7 Seek_Error_Rate         0x000e   100   100   000    Old_age   Always      
>  
-       3683
65c65
<   9 Power_On_Seconds        0x0032   023   023   000    Old_age   Always      
 
-       38808h+46m+11s
---
>   9 Power_On_Seconds        0x0032   023   023   000    Old_age   Always      
>  
-       38965h+50m+24s
67c67
<  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always      
 
-       1717
---
>  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always      
>  
-       1719
69,71c69,71
< 193 Load_Cycle_Count        0x0032   069   069   000    Old_age   Always      
 
-       635379
< 194 Temperature_Celsius     0x0022   100   090   000    Old_age   Always      
 
-       51 (Min/Max 8/62)
< 195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always      
 
-       9258
---
> 193 Load_Cycle_Count        0x0032   069   069   000    Old_age   Always      
>  
-       635384
> 194 Temperature_Celsius     0x0022   100   090   000    Old_age   Always      
>  
-       49 (Min/Max 8/62)
> 195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always      
>  
-       15601
76,77c76,77
< 200 Multi_Zone_Error_Rate   0x000e   100   100   000    Old_age   Always      
 
-       1038
< 203 Run_Out_Cancel          0x0002   100   100   000    Old_age   Always      
 
-       3732311179847
---
> 200 Multi_Zone_Error_Rate   0x000e   100   100   000    Old_age   Always      
>  
-       5133
> 203 Run_Out_Cancel          0x0002   100   100   000    Old_age   Always      
>  
-       2632791622157


I am also attaching smartctl_20120912 as http://pastebin.com/L5gRvQPV . This 
file is generated by
$ sudo smartctl -a /dev/sda > smartctl_20120912

This is a hard drive in Dell Inspiron E1505 laptop. Any help is greatly 
appreciated.

thanks
raju
-- 
Kamaraju S Kusumanchi
http://malayamaarutham.blogspot.com/


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/k2shbm$1la$1...@ger.gmane.org

Reply via email to