Hoe do I make it so gnome does not blank out my screen after 3 minutes? It
is getting really annoying when i am reading something. I've looked online,
but been unable to find anything.
home to Seattle tomorrow.
Cheers..
Matt Thompson [EMAIL PROTECTED]
Network Administrator
Williamson Associates
http://www.wassoc.com
Turns out IRQ 0 meant that the card wasn't actually getting an IRQ at all
(thanks to the ever fabulous rcw :). I set the BIOS to a non-PNP OS and
all is well. :)
Matt Thompson [EMAIL PROTECTED]
Network Administrator
Williamson Associates
http://www.wassoc.com
On Wed, 2 May 2001, Matt
. :)
Cheers.
Matt Thompson [EMAIL PROTECTED]
Network Administrator
Williamson Associates
http://www.wassoc.com
it set up properly? I've heard that ISDN can be a real pain.
TIA for any help :)
Cheers.
Matt Thompson [EMAIL PROTECTED]
Network Administrator
Williamson Associates
http://www.wassoc.com
Hello,
I may have the opportunity to be hired as a Network Administrator for the
graphics department of a large corporation. They have 67 cpus, many of
which are Macs. I don't know if they have their own dedicated print/file
servers (I haven't interviewed on-site yet, but a good friend of mine
Hello,
I've been combing Debian Glimpse and dejanews, but haven't found anything.
:( Here's my story:
I have Samba installed and sharing files to my Win95B ThinkPad just fine.
When I highlight my Linux box (Mattyt) in Windoze Explorer, it lists my
HPDeskJet660C, but when I right-click the
Thanks, Jon, '/dev/MAKEDEV sg' did the trick. :)
Matthew
On Mon, 26 Oct 1998, Jon Burchmore wrote:
I recently had to re-install because of an 'administrative error'. ;) I
am now trying to re-setup my UMAX S-6E using SANE. I remember that I had
to 'mknod' a new sga device, but I can't
Hello,
I recently had to re-install because of an 'administrative error'. ;) I
am now trying to re-setup my UMAX S-6E using SANE. I remember that I had
to 'mknod' a new sga device, but I can't remember what the major and minor
numbers were.
I've been searching the net and the mailing lists,
Hi, y'all,
I get this kind of thing in my xconsole with some frequency (a few times
a month, I guess):
Aug 16 15:59:47 mattyt in.telnetd[431]: connect from
c1-netserver.fibertel.com.ar
Aug 16 15:59:52 mattyt telnetd[431]: ttloop: peer died: Invalid or
incomplete multibyte or wide character
Ok, here's a weird one: I started GIMP today, and while it was trying to
load a plug-in, my Zip started spinning non-stop. I did a ps alx to see
if I could find the process causing it, and there didn't seem to be one.
So I unplugged my Zip, plugged it back in, then tried to mount it, and it
OK, I just dl'd and installed with gtk1.04 and libgimp1.0, and it no
longer gave me the 'Acquire Image' option under Xtns. I uninstalled it
and reinstalled .99.29, and everything is fine. I know it's in
Incoming, which I suppose means it's still technically beta, but...???
Matt
P.S. Please
I have a fully upgraded hamm system. I upgrade with dselect almost daily.
I recently tried to use my scanner under GIMP and it said:
Failed to open device 'umax:/dev/scanner' invalid argument.
A day or so later I tried to play a RealAudio feed, but it said 'Cannot
open audio device'. Just as a
On Fri, 5 Jun 1998, Ed Cogburn wrote:
Matt Thompson wrote:
I have a fully upgraded hamm system. I upgrade with dselect almost daily.
I recently tried to use my scanner under GIMP and it said:
Failed to open device 'umax:/dev/scanner' invalid argument.
A day or so later I tried
I just bought the above and when attempting to compile a kernel, I get a
message along the lines of internal compiler exited with error 4 or some
such. Sorry for not copying down the error exactly. I just re-installed
my P166 and the compile finished fine.
Is anyone familiar with this? Is this
OK, multi-part question.
1.) Just upgraded my hamm dist., got this:
running dpkg --pending --configure ...
Setting up tetex-base (0.9-6) ...
/usr/bin/texconfig: No $TEXMFMAIN; set the environment variable or in
texmf.cnf.
dpkg: error processing tetex-base (--configure):
subprocess
OK, multi-part question.
1.) Just upgraded my hamm dist., got this:
Errors were encountered while processing:
tetex-base
tetex-nonfree
tetex-bin
tetex-extra
???
First install tetex-base (you should install dpkg-perl before) and after
that install the rest of the
I have Frozen installed and compiled the floppy driver as a module
(fyi-this needs to be done on the 560 for some reason). I can 'insmod
floppy' just fine from a prompt, but when I added a 'floppy' line to
/etc/modules and rebooted, I got the following error:
Loading modules: floppy no
There is a new Tektronix 140A available that has PostScript built in.
Maybe this is a dumb question, but does it still need a driver? I guess
I'm not too familiar with the difference between a 'driver' and a
'filter'.
I thought that the filter converted the image to be printed
from a
Greetings everyone,
i'm having trouble mounting a fat 32 partition, mounting my zip drive
(Also FAT 32) and would like some advice on reading some Mac Formatted
disks(floppy Zip). Any advise is greatly appreciated.
Regards,
jd?
JD,
Did you get your situation solved? You need to compile
Just upgraded, got this:
Setting up mh (6.8.4-20) ...
chmod: /usr/lib/mh/spopfi: No such file or directory
dpkg: error processing mh (--install):
subprocess post-installation script returned error exit status 1
??
TIA for any help :)
Matt
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
I have an AVA-1505 working properly. Dumb question, but do you have the
IRQ on the card set to what you are having LILO pass to the kernel? That
could be the reason for the error message you're getting.
Matt
On Sun, 5 Apr 1998, Glenn Tenney KOTJ wrote:
(A copy of this message has also been
I think the printer's specs are 600x600 bw, 600x300 color, but I'm not
aware of a way to test the printed resolution I'm getting.
Matt
On Sun, 5 Apr 1998, Will Lowe wrote:
I have a 660Cse and performance is good, but color printing doesn't quite
reach the quality level you get under
I also got these errors regarding lesstif:
[prerm failure]
Can you please tell me what version of grep you have installed. I'm still
not sure if this is a lesstif problem or a result of grep-2.1-6 being
broken.
2.1-6. I'll go get 2.1-7 from Incoming and see if that helps, then I'll
let
OK, call me stoned (or maybe I should be ;) ), but where is Incoming??? I
searched all through ftp.debian.org and ftp.us.debian.org and even
llug.sep.bnl.gov/pub/debian/Incoming.
Thanks,
Matt
On Sat, 4 Apr 1998 [EMAIL PROTECTED] wrote:
On Fri, Apr 03, 1998 at 09:56:27PM -0800, Matt Thompson
The primary Incoming directory is on master.debian.org and is accessible to
developers only. There are several publicly accessible mirrors of it, e.g.
snip
Ok, I installed grep 2.1-7 and now xdm works, but when I try to login, the
Xserver starts (I'm using AccelX 2.1) but then restarts and
1998, Thomas E. Vaughan wrote:
MT == Matt Thompson [EMAIL PROTECTED] writes:
MT I also still get this about lesstif-bin while running dselect:
Make sure that /etc/X11/window-managers contains a line for each of
/usr/bin/X11/mwm and /usr/bin/X11/some_other_window_manager.
The prerm
Hi, Will,
This printer is exactly the same as the HP 660 repackaged with a different
model number (I know this for a fact because I work for Mac/PC Zone :) ).
Make sure to install the gs or gs-alladin and magicfilter packages and
choose the 'dj550c' filter when prompted.
I have a 660Cse and
Hello Liran,
I believe the PS L2 option for the Epson 800 is a software option that is
proprietary for either windoze or mac.
Ciao,
Matt
On Sat, 4 Apr 1998, Liran Zvibel wrote:
Hello,
I'm planing to buy a printer, and I don't know whether to choose Epson
Stylus color 800 or HP LJ 4L. I know
Ok, I'm running full hamm, and just updated (about 20mb worth). Now xdm
won't work at all, even with the /etc/init.d/xdm start command as root (I
have the same xdm file in /etc/init.d I had before). And, when I do
'startx', it uses mwm instead of AfterStep, which I have called as the
last line
On Fri, 3 Apr 1998, Rick Macdonald wrote:
Matt Thompson wrote:
This printer is exactly the same as the HP 660 repackaged with a different
model number (I know this for a fact because I work for Mac/PC Zone :) ).
Make sure to install the gs or gs-alladin and magicfilter packages
Why does libc6-dev depend specifically on kernel-headers 2.0.32? Why
won't 2.0.33 suffice, or kernel-source-2.0.33? It seems that I should
only have to have one of any of the kernel headers/source packages
installed at any one time.
Thanks,
Matt
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
Hi, all,
OK, I figured out that the cause of my 'problem' is the Xaw3dg package
required by gv. I've read all the documentation regarding scrollbars and
even tried downloading the sources from ftp.x.org, but the directions
given in /usr/doc/Xaw3dg/scrollbars didn't work for me. It said
OK, this is not the *weightiest* of issues, but... :)
After a recent upgrade, all my scrollbars went from smooth, dark grey
ones, to clear ones with fuzzy edges. I searched the mailing list
archives and found nothing about this. I also did a 'man scrollbar' on
the off-chance it might help.
I just did a clean 1.3.1 install, ran the autoup.sh, and then upgraded
to hamm fully using dselect. The following packages are missing:
Constructing list of files to get...
want: dists/unstable/main/binary-i386/base/sysvinit_2.73-2.deb (69k)
want:
Hi, all,
Updated hamm recently, and when attempting to configure SANE, got:
running dpkg --pending --configure ...
dpkg: dependency problems prevent configuration of sane:
sane depends on libgtk1 ( 1:0.99.4); however:
Version of libgtk1 on system is 1:0.99.5-1.
dpkg: error processing sane
I just upgraded GIMP, and when I tried to run it, got:
$ gimp
gimp fatal error: sigsegv caught
[n]othing, [e]xit, [s]tack trace, [a]ttach to process: s
#0 0x400ae018 in g_stack_trace ()
#1 0x400addd0 in g_debug ()
#2 0x807e2f7 in _start ()
#3 0x80bd790 in _start ()
#4 0xbc20 in ?? ()
#5
for libcompface1 (the libc5
version) perhaps that is wrong, and they should depend on libcompfaceg1.
brad
On Fri, 27 Feb 1998, Matt Thompson wrote:
Hello,
I'm running a full hamm system and just installed the above. When I tried
to run it for the first time, I got the following
Out of the blue, that started showing up in my xconsole on twenty minute
intervals, as in:
Feb 28 04:35:53 mattyt -- MARK --
Feb 28 04:55:53 mattyt -- MARK --
???
TIA for any insight. :)
matty
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Hello,
I'm running a full hamm system and just installed the above. When I tried
to run it for the first time, I got the following:
$ xemacs
xemacs: error in loading shared libraries
libcompface.so.1: cannot open shared object file: No such file or
directory
???
TIA for any help :)
matty
--
I hope the cross-posting is OK. I'm running a fully-updated hamm system
and wasn't sure if one was more correct than the other.
I was trying to print out my tax forms with Acrobat Reader. I have an HP
DJ660Cse, with magicfilter, djtools and GV installed. I was able to
print:
Hi, y'all,
Ok, I've been poring over the HOWTO's and man-pages and can't find two
little commands THAT I USED TO KNOW! :)
A friend told me about these a while back and now I can't remember or find
them. One is the command executed by root on a kernel to make it look at
a certain partition,
OK, so what happened to xload now? I just upgraded my hamm system and
xload has disappeared. Don't we go through this every once in a while?
Matt Thompson [EMAIL PROTECTED]
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL PROTECTED
name `#-1'
chgrp: invalid group name `#-1'
chgrp: invalid group name `#-1'
chgrp: invalid group name `#-1'
I've scoured all my crontabs, less'd and grep'd all the files in
/etc/cron.daily and looked everywhere else I can think of.
Any suggestions?
Thanks. :)
Matt Thompson [EMAIL PROTECTED
On 30-Nov-97 Matt Thompson wrote:
I seem to be having trouble configuring a custom kernel. The only
kernels that work are on the 'tecra' rescue disk, and the one I got
from Valery Petrov's site, but those don't support fat32 and when I
make a boot floppy from the rescue disk, it loads
I have started getting these messages out of the blue:
chgrp: invalid group name `#-1'
chgrp: invalid group name `#-1'
chgrp: invalid group name `#-1'
chgrp: invalid group name `#-1'
chgrp: invalid group name `#-1'
chgrp: invalid group name `#-1'
Electric Fence 2.0.5 Copyright (C) 1987-1995
On Mon, 1 Dec 1997, Matt Thompson wrote:
I have started getting these messages out of the blue:
chgrp: invalid group name `#-1'
chgrp: invalid group name `#-1'
chgrp: invalid group name `#-1'
chgrp: invalid group name `#-1'
chgrp: invalid group name `#-1'
chgrp: invalid group
On Mon, 1 Dec 1997, Matt Thompson wrote:
...and my ISP would rather that my machine doesn't continue to send out
messages to '[EMAIL PROTECTED]'.
Well, even if you fix this particular problem, your machine will still
generate messages to root from time to time, and they probably
it tries to boot the kernel.
Any help you can give would be *very* much appreciated. :)
Matt Thompson [EMAIL PROTECTED]
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL PROTECTED]
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word
?
(i am using the dev kernels because i have an Intel EtherExpress ProB
10/100 and the driver is built in. i still haven't been able to get my
win95 laptop networked with my Debian box, but i'll keep working on it a
while before i ask for help. :) )
thanks...
Matt Thompson [EMAIL PROTECTED
sure. :)
hope this helps,
matty
Matt Thompson [EMAIL PROTECTED]
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL PROTECTED]
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail
I'm interested in submitting a 'Beginner's Debian Installation Guide' of
some sort. I have about 80% of the framework of one completed, but am
concerned about the lack of fat32 support. As is stands, if someone has a
new computer formatted in fat32, they would have to format a fat16
the current archive at RealAudio? :)
Nice package, btw. I'd been struggling with rvplayer, and once I did the
above, it installed and ran flawlessly. :):)
Thanks.
Matt Thompson [EMAIL PROTECTED]
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL
I just upgraded and my main user account (mattyt) can't open any image
files, but root can. When I start GIMP as mattyt, I don't get the 'xtns'
file menu but it's there as root.
???
thanks :) ,
matty
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
. Of course, it also means I have to regularly check for new
messages as there is nothing to let me know when I have them. :)
hope this helps,
matty
Matt Thompson [EMAIL PROTECTED]
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL PROTECTED
I have to install a program via source that needs termcap. How do I
accomplish this in Bo.
you need the termcap-compat package. i found this by going to
www.debian.org, clicking on the Debian Packages link, and searching for
'termcap'. i made sure to tell the search engine to search only in
the module be
'patched'? I would be very appreciative to hear any opinion on this, and
how such a document might be received.
TIA for your consideration :)
Matt Thompson [EMAIL PROTECTED]
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL PROTECTED
PROTECTED]
Url http://www.vanislenet.net
==
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Matt Thompson [EMAIL PROTECTED]
MZI, Inc. v-206.430.3726
707 S
Well duh! a zero not and ohh! That worked and I made it up to make zdisk
when I got errors about
module.c:614 structure has no member named 'flags'
module.c:614 structure has no member named 'nsyms'
module.c:615 structure has no member named 'nsyms'
module.c:615 structure has no member
actually like to do is have rvplayer be world readable so that
any user on my machine can use it. I know that I would need to make
entries into /etc/profile, but how would I modify the above to do so?
thanks,
matty
Matt Thompson [EMAIL PROTECTED]
MZI, Inc. v-206.430.3726
707 S
come with my standard distribution.
Where can I get the module or driver for the AHA-1510 device?
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Matt Thompson [EMAIL PROTECTED]
MZI, Inc
Do not fear that I will be unduly effected by his messages.
Thanks
Bruce
thanks to you, Bruce, for your patience and cool-headedness. i haven't
been around long enough to disagree with you :) (seems that *every*
thinking person would eventually disagree with the leader about
hi,
i just received my new ibm tp560 and am going to network it to my
debian desktop. i could, of course, put debian on the tp (and probably
will make a partition for it), but i want to learn about networking win95
clients with linux servers.
i am currently running hamm and am downloading samba
I'm trying to install the driver for this card. I followed the
instructions, and when I executed the compile-command I found at the
bottom of the eepro100.c file (gcc -DMODVERSIONS -DMODULE -D__KERNEL__
-I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -c eepro100.c), I
receive the
Enough is enough.
It is time for Bruce Perens to step down form the leadership position, and an
interim leader take his place until a new leader can be chosen at the formal
election.
I state the following facts as reasons:
blah, blah, blah...i don't know, i've been using Debian for
Well, it seems to me the returns are in. *Everyone* who responded to dc's
comments supports Bruce, and wishes dc would make good on his promise and
just leave.
I propose that from here on out we ignore dc, don't resond to anything he
posts, and perhaps he *will* live up to his promise, and apply
I saw this network card on the Hardware-HOWTO list, so I was thinking
about buying one (I need a PCI network card, all my ISA's are used up).
I just installed the 2.0.29 source using dselect, and i did an xconfig
as root. When I got to the Network device support area, I see the
entry for the
Could anybody give me some help how to load mouse to this kernel? or help
me to find out how to build a kernel to recognize the Fat32? I think this
option should be include in the future debian distribution.
if i'm correct, you're original kernel recognized the mouse, but not
fat32? if that's
I saw this network card on the Hardware-HOWTO list, so I was thinking
about buying one (I need a PCI network card, all my ISA's are used up).
I just installed the 2.0.29 source using dselect, and i did an xconfig as
root. When I got to the Network device support area, I see the entry for
the
I just upgraded, using dselect, to pppd 2.2.3, and now pon doesn't work.
It overwrote my /etc/ppp.chatscript file and deleted my
/etc/ppp.options_out file. I reinstated them, and that didn't help.
???
thanks,
matty
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
is to make it an easier system to install and
maintain, while still being freely available to anyone.
i hope i don't sound overly critical. i certainly don't mean to be. it's
just something i came across and i wanted to throw it out there. :)
cheers,
matty
Matt Thompson [EMAIL PROTECTED]
MZI, Inc
there are instructions at:
http://www.debian.org/support.html
...piece of cake. :)
cheers,
matty
Matt Thompson [EMAIL PROTECTED]
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL PROTECTED]
On Tue, 21 Oct 1997 [EMAIL PROTECTED] wrote:
I
any plans for a debian package of this?
just wondering...:)
matty
Matt Thompson [EMAIL PROTECTED]
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL PROTECTED]
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL
it is a scanner tool, but i'm not familiar with GNOME at all...:)
checkit at:
http://www.mostang.com/sane/
matty
Matt Thompson [EMAIL PROTECTED]
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL PROTECTED]
On Tue, 21 Oct 1997, Bruce Perens
and see what everyone thinks.
lemme know...:)
matty
Matt Thompson [EMAIL PROTECTED]
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL PROTECTED]
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED
doesn't show that it's
moving until i let go. this isn't a problem really, just something i
noticed.
btw, since these are likely hamm issues, should i be sending them here or
to another list?
thanks
matty
Matt Thompson [EMAIL PROTECTED]
MZI, Inc. v-206.430.3726
707 S. Grady Wayf
is the
best way to remedy it?
thanks,
matty
Matt Thompson
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL PROTECTED]
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL
I receive these errors during boot-up (I included the /dev/... entries to
let you know at what point in the boot process the errors come up):
Mounting local file systems ...
/dev/hda1 on /win type vfat (rw)
/dev/hdb1 on /windoze type vfat (rw)
/dev/hdb2 on /extra type ext2 (rw)
and said no to the cddb's and now it works
fine.
anyone have any ideas why this might happen? the cddb's are one of the
neatest features of xmcd.
thanks,
matty
Matt Thompson
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL PROTECTED
needed elf-x11r6lib, but that it doesn't appear to be available?
Can anyone help me get a working xmix-type program under hamm?
thanks,
matty
Matt Thompson
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL PROTECTED]
--
TO UNSUBSCRIBE FROM
)
...then do a tar -xzvf on it, and run the install script as root
($ ./ns-install ,i believe) and it will do all the work for you. just
make sure you make a link from /usr/bin, or somesuch, because it won't put
the executable in one of the 'bin' directories.
cheers,
matty
Matt Thompson
MZI
dependencies that aren't available.
oh, well, i found a mixer that's good (tkmixer) and since it's only a
game that i can't get to work, it's really no big deal. debian remains
the best OS that I'm aware of, IMHO. :)
matty
Matt Thompson
MZI, Inc. v-206.430.3726
707 S. Grady Wayf
I bought a ASUS P55T2P4 recently and it came with Award BIOS v4.51, which
does allow booting off of SCSI devices (although I only have ide). You
might try going to Award's site and getting an upgrade.
cheers,
matty
Matt Thompson
MZI, Inc. v-206.430.3726
707 S. Grady Wayf
libgdbmg1_1.7.3-21.deb (--install):
conflicting packages - not installing libgdbmg1
Errors were encountered while processing:
libgdbmg1_1.7.3-21.deb
...is it ok to to a --force-conflicts, or should I do a dpkg -r libgdbm1
or what?
thanks,
matty
Matt Thompson
MZI, Inc. v-206.430.3726
hamm, of
course) and when i try to start it, i get:
Segmentation fault (core dumped)
...i thought it might be a permissions problem, but the same thing happens
as root.
???
thanks,
matty
Matt Thompson
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055
-happy camper again, lost 2 hours over this...
Matt Thompson
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL PROTECTED]
On Thu, 16 Oct 1997, Kevin F. Havener wrote:
Or the reverse may be occuring if you are using a commercial X server
like
packages - not installing libc5
Errors were encountered while processing:
libc5_5.4.33-7.deb
...should i install libc6-dev 2.0.5c-0.1 first?
thanks,
matty
Matt Thompson
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL PROTECTED]
On 14 Oct 1997
On 14-Oct-97 Matt Thompson wrote:
ok, i got libc5_5.4.33-7.deb from hamm, and here's what i got:
mattyt# dpkg -i libc5_5.4.33-7.deb
dpkg: regarding libc5_5.4.33-7.deb containing libc5:
libc5 conflicts with libc5-dev
libc5-dev (version 5.4.33-6
? (sorry for the lousy pun :) ).
thanks again for all the help,
matty
Matt Thompson
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL PROTECTED]
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble
gives me back a
'Segmentation fault' error.
please help! :)
thanks,
matty
p.s. sorry if this is a bother, but the GIMP looks so excellent, i *had*
to have it! :)
Matt Thompson
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL PROTECTED
Thomas,
Thanks for your reply. I'm currently working on the later version of GIMP
right now (i've found that it's quite involved. thankfully 'Che-Fox' is
gracious enough to help me with that) but I will try the lesstif for xtar.
Thanks again,
matty
Matt Thompson
MZI, Inc. v
by removing libc5 so I could install libc6
*bigblush*. Oh, well, I learn as I go...:)
What am I doing wrong here?
thanks,
matty
Matt Thompson
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL PROTECTED]
--
TO UNSUBSCRIBE FROM THIS MAILING
Ian,
I've made myself a member of audio in /etc/group. Also, do you have nas
installed? If so, it will automatically start an 'au' process at
boot-time. I just removed nas from /etc/init.d since i'd never used nas
anyway. Do a ps ax to see if there is an 'au' process running.
cheers.
Matt
it.
matty
Matt Thompson
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL PROTECTED]
On Tue, 14 Oct 1997, Scott Ellis wrote:
Someone messed up with the libc5 in the latest stable. It conflicts with
libc6 for no reason, if you install libc6
-6 and i guess there's a
-7) so i'll get that and go from there.
but for now it's off to work i go.
ttyl and thanks loads,
matty
Matt Thompson
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL PROTECTED]
On Tue, 14 Oct 1997, Scott Ellis wrote
hello, all,
I tried to install the GIMP and xtar, and when trying to run both, I get
the same error message:
xtar: can't load library 'libXm.so.2' ...and:
gimp: can't load library 'libXm.so.2'
???
matty
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL
be another profound truth. --Bohr
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Matt Thompson
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL
No, I'm running 1.3.1 and I deselect several times per week to stay
updated.
matty
Are you by any chance using Debian 1.2? I had that, and it seemed to have
all sorts of problems with X libraries. I upgraded to 1.3 and everything
worked fine.
On Sun, 12 Oct 1997, Matt Thompson wrote
] .
Trouble? e-mail to [EMAIL PROTECTED] .
Matt Thompson
MZI, Inc. v-206.430.3726
707 S. Grady Wayf-206.430.3420
Renton, WA 98055 [EMAIL PROTECTED]
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word unsubscribe to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL
1 - 100 of 103 matches
Mail list logo
