Re: vnc is making my cry

[Umarzuki Mochlis]

On Mon, 16 Nov 2020 at 00:32, Thomas Anderson
 wrote:
>
...
>
> I have read through the log file
>
> xrdb: No such file or directory
>
> xrdb: can't open file '/home/username/.Xresources'

check if this file still exists/permissions

>
> /usr/bin/startxfce4: X server already running on display :1
>
>
> I am running Gnome on both desktops. Ah! That's why the other one worked
> in the past -- I was not running Gnome on it. But, that doesn't bring me
> closer to a solution other than not running Gnome on the two machines,
> which I would rather not do, they are robust enough to run Gnome.
>
>
> Any advice help or encouragement would be appreciated.
>
> Neo
>
>

Re: When I log in it just shows my username and the $~ I’m completely new

[Umarzuki Mochlis]

On Mon, 28 Sep 2020 at 11:06, 황병희  wrote:
>
> Tox!c illude  writes:
>
> > ... and the $~ I’m completely new
>
> Ubuntu is good for beginner like as you, i think.
> And Debian is not easy to handle, IMHO.
>
> Sincerely, Byung-Hee
>
> --
> ^고맙습니다 _布德天下_ 감사합니다_^))//

This could mean that OP skipped desktop environment? Or DE failed to load?

Re: Debian 10.4 blank screen After new install

[Umarzuki Mochlis]

Glad to hear it!

On Wed, 22 Jul 2020 at 12:57, Edward M Kent  wrote:
>
> Thanks Umarzuki,  I will take your advice and make a bootable repair disk 
> tomorrow. Too late tonight.  I used f10 on reboot and now have win10.
> Mick
>
>
> On Tue, Jul 21, 2020, 10:33 PM Umarzuki Mochlis  wrote:
>>
>> On Wed, 22 Jul 2020 at 11:21, Edward M Kent  wrote:
>> >
>> > Hello All,   I am an old Nube trying to get set up to use a Beaglebone on 
>> > some projects.  I thought I had a successful install after a list of tasks 
>> > was displayed down the screen's left hand edge.  The list went blank and 
>> > left a - in the upper left corner.  This curser soon disappeared leaving a 
>> > blank screen.  The mouse cursed did show up but was a bit erratic.  I 
>> > rebooted several times and ended back at the same place.
>> > This is on a win10 Dell and I can not get back to win10 because I did not 
>> > get the dual boot setup.
>> > Thanks for any advice.
>> > Mick
>> >
>>
>> Hi,
>>
>> Try Boot-Repair.

Re: Debian 10.4 blank screen After new install

[Umarzuki Mochlis]

On Wed, 22 Jul 2020 at 11:21, Edward M Kent  wrote:
>
> Hello All,   I am an old Nube trying to get set up to use a Beaglebone on 
> some projects.  I thought I had a successful install after a list of tasks 
> was displayed down the screen's left hand edge.  The list went blank and left 
> a - in the upper left corner.  This curser soon disappeared leaving a blank 
> screen.  The mouse cursed did show up but was a bit erratic.  I rebooted 
> several times and ended back at the same place.
> This is on a win10 Dell and I can not get back to win10 because I did not get 
> the dual boot setup.
> Thanks for any advice.
> Mick
>

Hi,

Try Boot-Repair.

Re: Upgrading from very-old Debian

[Umarzuki Mochlis]

2017-11-29 14:45 GMT+08:00 Jan :
>
>
> On 28.11.2017 17:58, The Wanderer wrote:
>>
>> On 2017-11-28 at 11:53, Patrick Bartek wrote:
>>
>>> On Tue, 28 Nov 2017 10:28:57 -0500 The Wanderer
>>>  wrote:
>>>
 I've run across someone who says her machine is running Debian
 oldoldoldstable or maybe even oldoldoldoldstable, and who
 consequently can't upgrade to newer Debian.

 I seem to recall that there *is* a way to do step-wise upgrades of
 such old systems, i.e. upgrading from oldoldoldoldstable to
 oldoldoldstable, then to oldoldstable, then to oldstable, then to
 stable. However, I'm stumped as to how to actually get started on
 doing that.

 The last few steps of this are straightforward; oldoldstable is
 still available in the repos, as far as I'm aware. The first ones
 are more of a problem; if I understand matters correctly, anything
 prior to oldoldstable is removed from the live repos, although its
 .deb files are still maintained on e.g. snapshot.debian.org. (Which
 doesn't really suffice for the equivalent of a dist-upgrade,
 because you'd have to manually download all the correct .debs by
 hand and then install them with dpkg.)

 Is there in fact a way to manage the first steps of this stepwise
 upgrade, from one aged-out-of-the-repos release to another?

 If so, any pointers to information on how to go about it?
>>>
>>>
>>> Save yourself time and lots of problems, back up your data and do a
>>> clean install of the current Debian release.
>>
>>
>> A: This isn't me, this is someone I encountered.
>>
>> B: That's not always a viable option, depending on the circumstances.
>> It's probably the easier option when it is viable, but that doesn't mean
>> it should be the only option considered, for cases when something else
>> may be more viable.
>>
>>> To do what you want requires dist-upgrading each release, in order,
>>> one-at-a-time, then troubleshooting each dist-upgrade once done with
>>> no guarantees it will work.
>>
>>
>> Yes, of course. That's established procedure, and it's entirely
>> reasonable to expect people to follow it. (Is there any reason it
>> shouldn't work, when it worked for people at the time when those
>> releases were made?)
>>
>>> Be sure to read and explicitly follow the dist-upgrade instructions
>>> in the Release Notes for each release. Many times there are special
>>> things that must be done. Just dist-upgrading from your current old
>>> install to Stretch, skipping all those inbetween is "not
>>> recommended," meaning it won't work.
>>
>>
>> Of course. That's exactly why accessible repositories containing those
>> older releases are needed; my question was about how / where to manage
>> those, and that was answered in the first reply.
>>
>
> As a friendly recommendation:
> If it was about me, I would encourage to backup the home directories as well
> as mail or similar, depending what other kind of services running under the
> particular system.
>
> Backup the data to an external usb drive or the whole source drive if you
> are keen on that, for example. Then do a "clean" install of a new system on
> the original drive. Otherwise you might run into issues, where you might
> miss out on an important package, if you snapshot upgrade one by one.
>
> Running such a old and obsolete system is not only a security risk, but also
> in other areas where improvements has been made, you miss out on a lot. This
> was not the question of course, but it simply doesn't make much sense to
> keep such an old operating system around which is not even actively
> supported by documentation or people likewise anymore.
>
> And it might not simply be worth the hassle to upgrade step by step,
> possible breaking something in the process and troubleshoot why one package
> depends on another or crippling other services, having obsolete folders or
> even configuration files and settings laying around, which are not needed
> anymore. As stated by other people here, it might and perhaps will, take
> much longer time to troubleshoot everything or simply end up to be
> impossible to do correctly.
>
> Better clean and start from scratch install with a known supported
> installation.
> Ensure just to backup mail(dirs), mail, .ssh, .config or similar folders in
> "home" (or better the whole home folders" or "var" or other locations which
> might contain data you need. Or "etc" for configuration settings - but "etc"
> content, might and will most likely have changed dramatically depending on
> what was installed previously.
>
> To backup the software list of what was installed on the system, I would use
> something like an "apt list | grep installed" and pipe the output into a
> file. But for "apt-get" this does not seem to be an option, so perhaps
> theres another way to get a list of installed packages using dpkg or such,
> I'm just not aware of that.
> This way, you can 

Re: buying ssl certificate

[Umarzuki Mochlis]

>
>> Recently came to the market some lowcoast ssl certificate providers. Or free 
>> ssl providers. What do you think about them ?
>
> I think the best of the free ones is letsencrypt.
>
> Cheers,
> Andy
>
> --
> https://bitfolk.com/ -- No-nonsense VPS hosting
>

I'm using letsencrypt with certbot on debian 8 for owncloud 9 with
apache2 and it works great so far.

If you feel that you must pay for it, take a look at comparisons of
ssl certificates at below URL to make informed decision
https://www.instantssl.com/compare-ssl-certificates.html

Re: debian-6.0.4-i386-DVD-1.iso install issue

[Umarzuki Mochlis]

> I have downloaded debian-6.0.4-i386-DVD-1.iso from debian.org,and I install
> it to my computer.when the install finish,I got a AMD64 version debian.but
> my computer’s CPU is 32bit and the DVD iso is i386,
>
>

which url are you using?
have you compared its hash?
please verify.

>
> could yout please tell me why? I just want to install a 32bit debian6
> os.thank you.
>
>
>
> Shawn

Re: slow starting up jessie

[Umarzuki Mochlis]

2016-09-22 20:01 GMT+08:00 Darac Marjal :

>
>
> Another avenue, then, might be "systemd-analyze critical-chain". That will
> give you a tree of what the slowest dependencies of graphical.target are.
> Slow units will get two times: one preceded by "@" tells you how long into
> the boot the unit became active and the one preceded by "+" tells you how
> long the unit took to start.
>
>


graphical.target @17.794s
└─multi-user.target @17.794s
  └─libvirt-guests.service @17.633s +160ms
└─libvirtd.service @13.658s +3.785s
  └─dbus.service @12.095s
└─basic.target @12.045s
  └─paths.target @12.043s
└─cups.path @12.043s
  └─sysinit.target @11.985s
└─nfs-common.service @11.460s +524ms
  └─rpcbind.target @11.458s
└─rpcbind.service @11.243s +214ms
  └─network-online.target @11.242s
└─network.target @11.242s
  └─networking.service @7.113s +4.129s
└─local-fs.target @7.104s
  └─run-rpc_pipefs.mount @11.877s
└─local-fs-pre.target @3.796s
  └─systemd-remount-fs.service @3.723s +71ms
└─keyboard-setup.service @2.555s +1.166s
  └─systemd-udevd.service @2.504s +48ms

└─systemd-tmpfiles-setup-dev.service @1.598s +905ms
  └─kmod-static-nodes.service
@1.291s +305ms
└─system.slice @1.265s
  └─-.slice @1.265s


Some services took more than 7 seconds to start

Which one should I disable considering this PC mainly used for KVM?


>> dmesg output shows some error regarding firmware-linux-nonfree but
>> other desktop with same model also does not have it installed and did
>> not have this problem
>>
>> dmesg pastebin:
>> http://paste.debian.net/834468/
>>
>
> --
> For more information, please reread.

Re: slow starting up jessie

[Umarzuki Mochlis]

2016-09-22 17:16 GMT+08:00 Floris :

>>
>
> try:
> $ systemd-analyze blame
> to find out which services are slow to start
>
> Floris
>

it seemed that most services less than 5 seconds to start

root@pc2:~# systemd-analyze blame
  4.129s networking.service
  3.785s libvirtd.service
  3.763s exim4.service
  3.681s ModemManager.service
  2.460s lvm2-activation-early.service
  2.239s systemd-udev-settle.service
  1.652s alsa-restore.service
  1.648s systemd-logind.service
  1.619s rc-local.service
  1.615s speech-dispatcher.service
  1.614s wicd.service
  1.375s avahi-daemon.service
  1.166s keyboard-setup.service
  1.008s polkitd.service
   936ms systemd-modules-load.service
   905ms systemd-tmpfiles-setup-dev.service
   869ms kbd.service
   720ms rsyslog.service
   652ms resolvconf.service
   615ms systemd-setup-dgram-qlen.service
   588ms dev-mqueue.mount
   576ms colord.service
   569ms sys-kernel-debug.mount
   567ms dev-hugepages.mount
   550ms lvm2-activation.service
   524ms nfs-common.service
   401ms hdparm.service
   340ms
systemd-fsck@dev-disk-by\x2duuid-b110590a\x2d5007\x2d4836\x2d9d59\x2d9cb8055fe933.service
   336ms systemd-udev-trigger.service
   329ms console-setup.service
   305ms kmod-static-nodes.service
   240ms systemd-user-sessions.service
   214ms rpcbind.service
   196ms lvm2-monitor.service
   196ms ebtables.service
   173ms boot.mount
   165ms systemd-tmpfiles-setup.service
   160ms libvirt-guests.service
   124ms systemd-random-seed.service
   114ms systemd-sysctl.service
   101ms systemd-journal-flush.service
93ms systemd-update-utmp.service
86ms qemu-system-x86.service
85ms dev-mapper-pc2\x2d\x2dvg\x2dswap_1.swap
71ms systemd-remount-fs.service
51ms udev-finish.service
48ms systemd-udevd.service
32ms user@1000.service
29ms lightdm.service
14ms systemd-update-utmp-runlevel.service
11ms systemd-tmpfiles-clean.service
 5ms lvm2-pvscan@8:5.service
 2ms sys-fs-fuse-connections.mount

dmesg output shows some error regarding firmware-linux-nonfree but
other desktop with same model also does not have it installed and did
not have this problem

dmesg pastebin:
http://paste.debian.net/834468/

slow starting up jessie

[Umarzuki Mochlis]

one of my desktop is very slow to read log in prompt (no DE)

I can't seem to find any error log in syslog

Debian 8 amd64
compaq dc5850 sff

syslog:
Sep 22 16:30:50 pc2 rsyslogd: [origin software="rsyslogd"
swVersion="8.4.2" x-pid="743" x-info="http://www.rsyslog.com;]
rsyslogd was HUPed
Sep 22 16:30:59 pc2 systemd[1515]: Starting Paths.
Sep 22 16:30:59 pc2 systemd[1515]: Reached target Paths.
Sep 22 16:30:59 pc2 systemd[1515]: Starting Timers.
Sep 22 16:30:59 pc2 systemd[1515]: Reached target Timers.
Sep 22 16:30:59 pc2 systemd[1515]: Starting Sockets.
Sep 22 16:30:59 pc2 systemd[1515]: Reached target Sockets.
Sep 22 16:30:59 pc2 systemd[1515]: Starting Basic System.
Sep 22 16:30:59 pc2 systemd[1515]: Reached target Basic System.
Sep 22 16:30:59 pc2 systemd[1515]: Starting Default.
Sep 22 16:30:59 pc2 systemd[1515]: Reached target Default.
Sep 22 16:30:59 pc2 systemd[1515]: Startup finished in 90ms.
Sep 22 16:31:04 pc2 systemd[1528]: Starting Paths.
Sep 22 16:31:04 pc2 systemd[1528]: Reached target Paths.
Sep 22 16:31:04 pc2 systemd[1528]: Starting Timers.
Sep 22 16:31:04 pc2 systemd[1528]: Reached target Timers.
Sep 22 16:31:04 pc2 systemd[1528]: Starting Sockets.
Sep 22 16:31:04 pc2 systemd[1528]: Reached target Sockets.
Sep 22 16:31:04 pc2 systemd[1528]: Starting Basic System.
Sep 22 16:31:04 pc2 systemd[1528]: Reached target Basic System.
Sep 22 16:31:04 pc2 systemd[1528]: Starting Default.
Sep 22 16:31:04 pc2 systemd[1528]: Reached target Default.
Sep 22 16:31:04 pc2 systemd[1528]: Startup finished in 12ms.
Sep 22 16:31:18 pc2 rsyslogd0: action 'action 17' resumed (module
'builtin:ompipe') [try http://www.rsyslog.com/e/0 ]
Sep 22 16:31:18 pc2 rsyslogd-2359: action 'action 17' resumed (module
'builtin:ompipe') [try http://www.rsyslog.com/e/2359 ]
Sep 22 16:31:18 pc2 systemd[1515]: Stopping Default.
Sep 22 16:31:18 pc2 systemd[1515]: Stopped target Default.
Sep 22 16:31:18 pc2 systemd[1515]: Stopping Basic System.
Sep 22 16:31:18 pc2 systemd[1515]: Stopped target Basic System.
Sep 22 16:31:18 pc2 systemd[1515]: Stopping Paths.
Sep 22 16:31:18 pc2 systemd[1515]: Stopped target Paths.
Sep 22 16:31:18 pc2 systemd[1515]: Stopping Timers.
Sep 22 16:31:18 pc2 systemd[1515]: Stopped target Timers.
Sep 22 16:31:18 pc2 systemd[1515]: Stopping Sockets.
Sep 22 16:31:18 pc2 systemd[1515]: Stopped target Sockets.
Sep 22 16:31:18 pc2 systemd[1515]: Starting Shutdown.
Sep 22 16:31:18 pc2 systemd[1515]: Reached target Shutdown.
Sep 22 16:31:18 pc2 systemd[1515]: Starting Exit the Session...
Sep 22 16:31:18 pc2 systemd[1515]: Received SIGRTMIN+24 from PID 1551 (kill).
Sep 22 16:31:20 pc2 anacron[679]: Job `cron.daily' terminated
Sep 22 16:31:20 pc2 anacron[679]: Normal exit (1 job run)

where should I check next? It got to this since I installed LXDE and
even after I removed lxde, it is still like this.

unable to log in using openldap user

[Umarzuki Mochlis]

Hi,

I need some guidance on setting openldap server and to do
authentication using openldap users.

openldap server: jessie 64-bit
openldap client: jessie 64-bit

ldapsearch test from client to server:

# ldapsearch -h 192.168.191.120 -D cn=admin,dc=test,dc=lab -W -x -b
'dc=test,dc=lab' 'userName=*'
Enter LDAP Password:
# extended LDIF
#
# LDAPv3
# base 

Re: Debian Gnome Or XFCE ?

[Umarzuki Mochlis]

I had to use xfce on my old T43 although Mate would be closer to Gnome.


  Original Message  
From: Bret Busby
Sent: Thursday, 13 August 2015 11:38
To: debian-user@lists.debian.org
Subject: Re: Debian Gnome Or XFCE ?

On 13/08/2015, Stephen Powell zlinux...@wowway.com wrote:
 On Wed, 12 Aug 2015 20:38:19 -0400 (EDT), Patrick Bartek wrote:

 I've never used GNOME 3. It won't fully run on any of my systems since
 none don't have 3D capability. So, it goes into fallback mode.

 I assume you meant to say none have 3D capability.

 When GNOME 3 first came out, it had a fallback mode for systems without
 3D graphics acceleration capability. Fallback mode was essentially the
 GNOME 2 interface. I continued to use GNOME 3 in fallback mode for a
 while. Changing desktops is a lot of work, and I'm lazy. But eventually,
 GNOME 3 eliminated fallback mode. At that point, GNOME 3 became totally
 unusable for me. I have at least two systems without 3D graphics
 capability: one desktop and one laptop. I'm not sure about the others.
 Anyway, elimination of fallback mode from GNOME 3 forced the issue.
 I had to switch to something else. I did some research, and discovered
 that XFCE was a popular desktop with a GNOME2-like interface and
 was designed to accommodate applications written for GNOME. I thought it
 would be a relatively smooth transition for me. So I tried it. I've never
 looked back.

 XFCE is my standard desktop now. When doing new installs on new
 machines, I install XFCE as the desktop by selecting it as the desktop
 of choice in the Debian installer. If I were to start over from scratch
 today, I might try LXDE. But I'm happy with XFCE, and I see no compelling
 reason to change at this point.


Maybe it would be worth having a look at ubuntu-mate.org, downloading
the iso image, and running it as a live disk.


-- 
Bret Busby
Armadale
West Australia
..

So once you do know what the question actually is,
you'll know what the answer means.
- Deep Thought,
Chapter 28 of Book 1 of
The Hitchhiker's Guide to the Galaxy:
A Trilogy In Four Parts,
written by Douglas Adams,
published by Pan Books, 1992

Re: Teeny tiny console font after firmware-linux

[Umarzuki Mochlis]

2015-05-21 11:10 GMT+08:00 Bob Bernstein poo...@ruptured-duck.com:
 I always cleave to my number one fundamental rule: if it ain't
 broke don't fix it. Unless of course curiosity comes into the
 picture and momentarily releases the crazy person who lives in
 my head.

 It wasn't pure unalloyed curiosity. I did see a line in dmesg
 telling me I should install the package noted. And no, I did not
 exercise due diligence, say, by looking into why I might
 really need that package, and into what awful things could
 happen to me if I failed in my allegiance to the Kernel Gods.

 My spidey sense is tingling the way it almost always does when I
 try to foist off on a list a question I know must be a FAQ, but
 there you have it, nevertheless, as they say.

 But, may I have my console font back, please?

 (I have Jessie amd64 here.)


 --
 Bob Bernstein




dpkg-reconfigure ?


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
https://lists.debian.org/cahw9mbxthpobpmugf3yfusekfys8ync5qlegroentczypkz...@mail.gmail.com

Re: bug report

[Umarzuki Mochlis]

could be debian-installer package?

2015-05-06 11:13 GMT+08:00 Nader nad...@gmail.com:
 hi, I need to report a bug in the debian installation system. I do not
 know the name of the package that reportbug needs. Please let me know
 how to proceed.


 --
 To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
 with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
 Archive: 
 https://lists.debian.org/caj19urtnz2l94d2jukdruoubeqnqjxweinnti-26bykzkfl...@mail.gmail.com



-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
https://lists.debian.org/CAHW9mbxiiLyz85D5vLBLkt-a8XOFbNqHnaw=_purgxgfhbp...@mail.gmail.com

Re: Jessie in VirtualBox: Terminal dies

[Umarzuki Mochlis]

2015-04-28 11:58 GMT+08:00  dietmar.4...@web.de:
 Hi,

 I just installed Jessie in a Virtualbox environment (running on Win7 64Bit) 
 without any problems.
 The installed system starts up fine.

 But when I try to open a terminal in the window manager, the icon and a 
 waiting cursor appears for some seconds, then they close. Seems that the 
 terminal died...

 I tried with several configurations (GNOME, KDE), but no success...

 Any ideas?

 Thx,
 Dietmar

have you tried installing guest-additions for that vbox version?


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
https://lists.debian.org/cahw9mbyhjrey7qncm4qe8asjknf+ze6zpql5izpoj4icwqv...@mail.gmail.com

Re: Realtek firmware

[Umarzuki Mochlis]

enable non-free repo and install firmware-realtek

2015-04-16 22:32 GMT+08:00 German gentger...@gmail.com:
 Hi all. What do I need to install Realtek firmware for my wireless card? 
 Thanks

 --
 German gentger...@gmail.com


 --
 To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
 with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
 Archive: 
 https://lists.debian.org/20150416103207.4fdf7cacc2e7e88997c62...@gmail.com



-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
https://lists.debian.org/CAHW9mbxhUtHgWmpXjnZfgtkt7v7C0cPvNo==6yy8hjzp42s...@mail.gmail.com

Re: no more dovecotpw?

[Umarzuki Mochlis]

2014-01-31 Reco recovery...@gmail.com:
  Hi.

 On Fri, 31 Jan 2014 02:43:54 +0800
 Umarzuki Mochlis umarz...@gmail.com wrote:

 when I was trying to run
 # dovecotpw -s SHA1

 I found out that there's no dovecotpw anymore (searched with apt-file)

 doveadm pw -s SHA1

 Reco

thanks.

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbwMeXa9GUdeXRSzCAKP8pFaSR3CY0oJ=mm+dcjl4ko...@mail.gmail.com

no more dovecotpw?

[Umarzuki Mochlis]

hi,

I'm trying to setup an email server by following article from
http://www.rosehosting.com/blog/how-to-setup-simple-but-yet-powerful-mail-server-using-postfix-dovecot-and-sasl-in-debian-6-squeeze/

when I was trying to run
# dovecotpw -s SHA1

I found out that there's no dovecotpw anymore (searched with apt-file)

what other steps should I take to move on from where I left of?

thanks.

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbyDrmjZgRqDrdRtA1EqNFkoX=4ZzGESXs7fi+gqY=u...@mail.gmail.com

Re: Installation

[Umarzuki Mochlis]

2014/1/14 Azeem Abdul Azeem maazeem...@gmail.com:
 Hi
 I want to install Debian on my vertual machine (windows 200 R2 Hyper-V). So
 i need a bootable ISO. So kindly send me the link where i can download the
 bootable iso and install in the system
 Thanks
 M A Azeem

Here - http://cdimage.debian.org/debian-cd/7.3.0/amd64/iso-cd/

pick the 1st ISO only for installation.

FYI, it is a lot faster to search for it than asking in this list or
you might have encountered something that brought you here.

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mby0_rreue+_3fgkp1npmgnkyxtyfyly0z6sj-arkeo...@mail.gmail.com

Re: ATI graphic card and Jessie.

[Umarzuki Mochlis]

2013/10/7 Erwan David er...@rail.eu.org:
 Hello,

 I am in testing, and I have a radeom 4000 graphic card. I used to use
 the radeon driver but I had to switch after kernel 3.10, because I
 got GUI freeze of 20 to 30 s avery 15 to 20 minutes, making it
 unusable.

 But now I see that fglrx-legacy is not compatible with the new
 xorg. Is there a hope to get a new version, or should I use something
 else than debian (changing hardware is not possible that's my work PC,
 and if it does not work, use the corporate windows image).



your problem could be similar to my X300 radeon on T43

what i did:

1- install xserver-xorg-video-ati libgl1-mesa-glx firmware-linux-nonfree
2- remove xserver-xorg-video-radeon

if i remember it correctly, i also had to replace gnome 3 with mate
for a smoother desktop experience

YMMV


-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbwmB3wMqkd7pX1xzJWL6kBhgaWjecUNEeeejp_gWa0=x...@mail.gmail.com

Re: How to install latest VLC 2.1.0 in debian

[Umarzuki Mochlis]

2013/10/3 Anubhav Yadav anub...@icoer.in:
 Changed the subject of the thread.  Maybe that will help to get rid of the
 freeze.


 Sent from Samsung Mobile

 Anubhav anubhav1...@gmail.com wrote:

deb-multimedia repo

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbxoa0H0R-FkVBRcECdxrT5w8U=xtmnu181_qq248fl...@mail.gmail.com

Re: I can't use lenny

[Umarzuki Mochlis]

2013/9/11 Long Wind longwind2...@gmail.com:
 I have installed lenny and put a line in sources.list

 deb http://archive.debian.org/debian lenny main

 When I run apt-get update it fails to get Packages


deb http://archive.debian.org/debian-security lenny/updates main contrib
deb http://archive.debian.org/debian-volatile lenny/volatile main contrib
deb http://archive.debian.org/debian/ lenny main contrib non-free
deb http://archive.debian.org/debian-security lenny/updates main contrib
deb http://archive.debian.org/debian-volatile lenny/volatile main contrib

try this and also try changing your DNS to google DNS servers (8.8.8.8
 8.8.4.4), somehow where I come from, debian.org is being blocked.

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbyqWR7+KCfsjWxisD8dM07s=-8ow+1yzcvh7ymr2nh...@mail.gmail.com

Re: wheezy on T43

[Umarzuki Mochlis]

2013/8/17 Henrique de Moraes Holschuh h...@debian.org:

 I found a tutorial on building krenel 3.9 on debian -
 http://linuxg.net/compile-kernel-3-9-on-debian-wheezy/

 After that I do need to build latest xorg-radeon or just install
 package on wheezy?

 Just use the kernel 3.10 backport for Wheezy, already packaged in the
 wheezy-backports suite.  It is not what I use, but it should work just fine.


Instead I tried kernel 3.10 on Jessie, except for occasional black
screen, which I have have press Ctrl+Alt+F1 then Ctrl+Al+F8. On Wheezy
with its default kernel, open source radeon driver, mesa-utils and
firmware-linux-nonfree, this would cause laptop to freeze.

Here's log messages around time issue occured

Aug 20 00:53:24 t43 kernel: [ 1965.960063] radeon :01:00.0: GPU
lockup (waiting for 0x000159b7 last fence id
0x000159b5)
Aug 20 00:53:24 t43 kernel: [ 1966.142343] radeon :01:00.0: Saved
91 dwords of commands on ring 0.
Aug 20 00:53:24 t43 kernel: [ 1966.142361] radeon :01:00.0:
(r300_asic_reset:392) RBBM_STATUS=0x80010140
Aug 20 00:53:24 t43 kernel: [ 1966.643592] radeon :01:00.0:
(r300_asic_reset:411) RBBM_STATUS=0x80010140
Aug 20 00:53:24 t43 kernel: [ 1967.140828] radeon :01:00.0:
(r300_asic_reset:423) RBBM_STATUS=0x0140
Aug 20 00:53:24 t43 kernel: [ 1967.140880] radeon :01:00.0: GPU
reset succeed
Aug 20 00:53:24 t43 kernel: [ 1967.140888] radeon :01:00.0: GPU
reset succeeded, trying to resume
Aug 20 00:53:24 t43 kernel: [ 1967.140898] radeon :01:00.0:
f767ec00 unpin not necessary
Aug 20 00:53:24 t43 kernel: [ 1967.288708] [drm] radeon: 1 quad pipes,
1 Z pipes initialized.
Aug 20 00:53:24 t43 kernel: [ 1967.293020] radeon :01:00.0: WB enabled
Aug 20 00:53:24 t43 kernel: [ 1967.293025] radeon :01:00.0: fence
driver on ring 0 use gpu addr 0xa000 and cpu addr
0xffb6
Aug 20 00:53:24 t43 kernel: [ 1967.293064] [drm] radeon: ring at
0xA0001000
Aug 20 00:54:11 t43 kernel: [ 2012.980069] radeon :01:00.0: GPU
lockup (waiting for 0x00015e02 last fence id
0x00015e01)
Aug 20 00:54:11 t43 kernel: [ 2013.162692] radeon :01:00.0: Saved
27 dwords of commands on ring 0.
Aug 20 00:54:11 t43 kernel: [ 2013.162711] radeon :01:00.0:
(r300_asic_reset:392) RBBM_STATUS=0x80010140
Aug 20 00:54:11 t43 kernel: [ 2013.663958] radeon :01:00.0:
(r300_asic_reset:411) RBBM_STATUS=0x80010140
Aug 20 00:54:11 t43 kernel: [ 2014.161186] radeon :01:00.0:
(r300_asic_reset:423) RBBM_STATUS=0x0140
Aug 20 00:54:11 t43 kernel: [ 2014.161238] radeon :01:00.0: GPU
reset succeed
Aug 20 00:54:11 t43 kernel: [ 2014.161246] radeon :01:00.0: GPU
reset succeeded, trying to resume
Aug 20 00:54:11 t43 kernel: [ 2014.161256] radeon :01:00.0:
f767ec00 unpin not necessary
Aug 20 00:54:11 t43 kernel: [ 2014.309170] [drm] radeon: 1 quad pipes,
1 Z pipes initialized.
Aug 20 00:54:11 t43 kernel: [ 2014.312458] radeon :01:00.0: WB enabled
Aug 20 00:54:11 t43 kernel: [ 2014.312463] radeon :01:00.0: fence
driver on ring 0 use gpu addr 0xa000 and cpu addr
0xffb6
Aug 20 00:54:11 t43 kernel: [ 2014.312502] [drm] radeon: ring at
0xA0001000

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbz1lvbiqagty-2hthjlo4w33uallphfri8c05d9m2e...@mail.gmail.com

Re: wheezy on T43

[Umarzuki Mochlis]

2013/8/17 Henrique de Moraes Holschuh h...@debian.org:
 On Sat, 17 Aug 2013, Umarzuki Mochlis wrote:
 how's 3D acceleration? on wheezy radeon keeps restarting until my
 laptop hangs, removing radeon x11 is the only way, leaving no 3D
 acceleration

 It just works (as well as you can expect from a R300-family Radeon, which
 can only do OpenGL 2.1).



I found a tutorial on building krenel 3.9 on debian -
http://linuxg.net/compile-kernel-3-9-on-debian-wheezy/

After that I do need to build latest xorg-radeon or just install
package on wheezy?

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbwfqx5vmap9yk2go8ackzpb9uaw-kcveukcaxvkqof...@mail.gmail.com

Re: wheezy on T43

[Umarzuki Mochlis]

2013/7/1 Henrique de Moraes Holschuh h...@debian.org:
 On Mon, 01 Jul 2013, Umarzuki Mochlis wrote:
 any recent success install of wheezy 32-bit on thinkpad T43 with sound
 and wireless working?

 Yes, mine works just fine, but it has an Intel IPW2915 wireless module and
 an ATI Radeon X300.  It is a model 2687 T43/p.

 However, I do use a custom Linux 3.9.8 kernel, and the open X.org GPU
 drivers for the Radeon X300.  The ATI-radeon-based T43 are known to work
 just fine with the latest 3.4 and 3.9 kernels, it has been a very long while
 since I last tried any kernel from the 3.2 series.

how's 3D acceleration? on wheezy radeon keeps restarting until my
laptop hangs, removing radeon x11 is the only way, leaving no 3D
acceleration

 Make sure you update your ThinkPad to its latest BIOS and EC firmware if you
 haven't done so already.


BIOS being used is from latest version



--
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbxokboZMTtDZcMD69DSAPfzTCOQDU+83=wnpu2e86a...@mail.gmail.com

wheezy on T43

[Umarzuki Mochlis]

any recent success install of wheezy 32-bit on thinkpad T43 with sound
and wireless working?

my recent attempt was able to get sound working and freezed after a
few minutes of usage

managed to get wireless working on wheezy

when i tested with windows 7, i managed to get sound and wireless
working after installing latest updates

--
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbwOaE6rpNkkgC-G5yhXOs-3xfGA=dce_g4k_n1aayv...@mail.gmail.com

Re: thinkpad t43 hangs

[Umarzuki Mochlis]

2013/6/7 Umarzuki Mochlis umarz...@gmail.com:
 screen blank for a second then back again, mouse cursor disappeared.
 after i go to terminal ( Ctrl + Alt + F1) then back to Ctrl + Alt +
 F8, it goes back to normal for a while. After a few times, it finally
 hangs and I have to force shutdown.

 have anyone experienced this situation?

 any idea/suggestions?

after I install on squeeze instead and realized that it was radeon
that caused it so I removed radeon oss, it finally did not hang

# lsmod
Module  Size  Used by
michael_mic 1506  4
arc4 974  2
ecb 1405  2
lib80211_crypt_tkip 6717  1
aes_i5866816  1
aes_generic25738  1 aes_i586
lib80211_crypt_ccmp 3643  1
acpi_cpufreq4955  1
cpufreq_userspace   1488  0
cpufreq_stats   1997  0
cpufreq_powersave602  0
cpufreq_conservative 4018  0
ppdev   4058  0
lp  5570  0
sco 5885  2
bridge 33063  0
rfcomm 25207  0
stp  996  1 bridge
bnep7468  2
l2cap  21745  6 rfcomm,bnep
bluetooth  36347  6 sco,rfcomm,bnep,l2cap
uinput  4796  1
fuse   44376  1
ext3   94536  1
jbd32449  1 ext3
loop9777  0
pcmcia 16194  0
ipw2200   108392  0
snd_intel8x0   19595  1
yenta_socket   16403  1
libipw 18447  1 ipw2200
snd_intel8x0m   8100  0
joydev  6739  0
thinkpad_acpi  42003  0
rfkill 10280  4 bluetooth,thinkpad_acpi
led_class   1757  1 thinkpad_acpi
rsrc_nonstatic  7057  1 yenta_socket
rng_core2178  0
nsc_ircc   10291  0
snd_ac97_codec 79152  2 snd_intel8x0,snd_intel8x0m
nvram   3985  1 thinkpad_acpi
video  14605  0
output  1204  1 video
pcmcia_core20458  3 pcmcia,yenta_socket,rsrc_nonstatic
ac97_bus 710  1 snd_ac97_codec
parport_pc 15799  1
i2c_i8016462  0
i2c_core   12795  1 i2c_i801
parport22554  3 ppdev,lp,parport_pc
ac  1636  0
battery 3782  0
snd_pcm47226  3 snd_intel8x0,snd_intel8x0m,snd_ac97_codec
pcspkr  1207  0
evdev   5609  16
psmouse44845  0
irda   75968  1 nsc_ircc
crc_ccitt   1039  1 irda
snd_seq35495  0
snd_timer  12270  2 snd_pcm,snd_seq
snd_seq_device  3673  1 snd_seq
snd34431  9
snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
serio_raw   2916  0
lib802112878  4
lib80211_crypt_tkip,lib80211_crypt_ccmp,ipw2200,libipw
soundcore   3450  1 snd
snd_page_alloc  5061  3 snd_intel8x0,snd_intel8x0m,snd_pcm
processor  26343  2 acpi_cpufreq
button  3598  0
ext4  257173  1
mbcache 3762  2 ext3,ext4
jbd2   56315  1 ext4
crc16   1027  2 l2cap,ext4
sg 19945  0
sr_mod 10770  0
cdrom  26435  1 sr_mod
sd_mod 26029  4
crc_t10dif  1012  1 sd_mod
ata_generic 2247  0
ata_piix   17744  3
uhci_hcd   16073  0
ahci   27814  0
libata115925  3 ata_generic,ata_piix,ahci
tg395917  0
scsi_mod  105157  4 sg,sr_mod,sd_mod,libata
ehci_hcd   28745  0
libphy 11646  1 tg3
usbcore99530  3 uhci_hcd,ehci_hcd
nls_base4727  1 usbcore
thermal 9206  0
thermal_sys 9378  3 video,processor,thermal

--
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbycitn58v2dm0ow4fj7okm7qvwzgyy3ta0rfqt5cw_...@mail.gmail.com

thinkpad t43 hangs

[Umarzuki Mochlis]

hi,

i installed wheezy i386 on my t43 via netinst

it hangs after i i installed a few sotwares/firwares which includes:

firmware-fw2x00
firmware-linux-nonfree
vlc
msttcorefonts
icedtea-plugin
fkashpkugin-nonfree

i'm not sure which one caused that but here's what happened:

screen blank for a second then back again, mouse cursor disappeared.
after i go to terminal ( Ctrl + Alt + F1) then back to Ctrl + Alt +
F8, it goes back to normal for a while. After a few times, it finally
hangs and I have to force shutdown.

have anyone experienced this situation?

any idea/suggestions?


--
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbzpLRuREag=q_a5rmCiUBA=ruzknwfmbclwbrawr29...@mail.gmail.com

Re: Upgrading from squeeze to wheezy fails with error

[Umarzuki Mochlis]

Maybe you could share us link(s) to solutions that you had tried before?

2013/6/7 fireball m...@lennig.org:
 Today I tried upgrading from squeeze to wheezy. I followed the instructions
 here:
 http://www.howtoforge.com/how-to-upgrade-debian-squeeze-to-wheezy

 When I did the dist-upgrade, after it downloaded several hundred files, it
 gave me this error message:

 E: Could not perform immediate configuration on 'libgstreamer0.10-0'. Please
 see man 5 apt.conf under APT::Immediate-Configure for details. (2)

 I am stuck. Although others have experienced this problem, there are few
 solutions. The solutions I found did not work.

 I would be grateful for any suggestions on how to proceed.



 --
 View this message in context: 
 http://debian.2.n7.nabble.com/Upgrading-from-squeeze-to-wheezy-fails-with-error-tp2968556.html
 Sent from the Debian User mailing list archive at Nabble.com.


 --
 To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
 with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
 Archive: http://lists.debian.org/1370579997974-2968556.p...@n7.nabble.com




--
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mby9bqcz8pqb46y175qc82aviornmyoogxklw66hc5_...@mail.gmail.com

lightweight dns server

[Umarzuki Mochlis]

hi,

please suggest a lightweight dns server that is available on debian main repo

my main usage is to be used as split domain, mainly to able to resolve
mx record for mailserver test lab

thanks.

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbyvxt4vaob6ww2qyrqa4rqf7usyj85rw2tghcmen9r...@mail.gmail.com

testing openvpn virtually on debian host

[Umarzuki Mochlis]

hi,

please suggest me a virtualization software to help me practice
configuring openvpn
thanks.
-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbxxqvjahfqzf1n-h9pynsimv5+zmso-mjgpgbxonz2...@mail.gmail.com

Re: testing openvpn virtually on debian host

[Umarzuki Mochlis]

2013/2/1 Artur Frydel artur.fry...@gmail.com:
 On Thu, Jan 31, 2013 at 1:15 PM, Umarzuki Mochlis umarz...@gmail.com wrote:
 hi,

 please suggest me a virtualization software to help me practice
 configuring openvpn
 thanks.


 The question is: what kind of hardware do you have? How strong? How
 many ram, etch...
 But generally speaking Virtualbox with headless mode and two guest
 (basic debian with 256 dedicated ram memory) will be enough.


thanks, I will try configuring it on vbox 4.2
my laptop (Lenovo V470) has 4GB RAM



-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbz8zvoa48q5dzfx5hjjrtwytywouvtbrbmqtbocjzk...@mail.gmail.com

Re: How to check what ports are filtered on a public network?

[Umarzuki Mochlis]

On Dec 26, 2012 6:58 AM, jug...@lavabit.com wrote:

 Hello.

 Some public networks don't allow to connect to port 25 or forbid
 non-http traffic. How to check what ports are filtered/blocked? I
 think it can be done with nmap, but I have never used it.



 --
 To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
 with a subject of unsubscribe. Trouble? Contact
listmas...@lists.debian.org
 Archive:
http://lists.debian.org/17031.194.150.168.162.1356476256.squir...@lavabit.com

try using its interface zenmap

Re: can't install skype 4.1 in debian testing ; lost the working 4.0

[Umarzuki Mochlis]

2012/11/19 Mark Allums m...@allums.com:
 Hello,

 Is there anyone having luck with skype 4.1 in debian ?
 I have tried to install it and get the following dependency issue and
 also lost my working skype 4.0

 dpkg: error processing skype (--install):
  dependency problems - leaving unconfigured
 Processing triggers for desktop-file-utils ...
 Errors were encountered while processing:
  skype

 

 Any link to download the 4.0 version ?


 If you are running 64-bit, you will need to install some 32-bit libraries.
 The issue many people are having with Skype on Debian is the multiarch
 transition.  I think Skype/Microsoft has made changes with 4.1 that address
 some multiarch issues while creating others.  If this is the case , 4.0 may
 not want to install properly, either.

 Are you running Squeeze, Wheezy, or sid?

 Try this:

 #dpkg --add-architectecture i386
 #apt-get update

 Then try installing 4.1 package again.  As I said, you may need to add some
 32-bit libraries.


last time I tried, I need to have libqt4-gui  ia32-libs-gtk

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbz4zR=mq49kmqs6pl+w8y4ofn21r66ejuwfm1wcqem...@mail.gmail.com

Re: how do i disable auto-connect to wireless network on wheezy?

[Umarzuki Mochlis]

2012/11/12 Selim T. Erdogan se...@alumni.cs.utexas.edu:

 I'm assuming that you mean: in wheezy gnome-shell's wireless icon on the
 tab doesn't give you the same setup options that squeeze's gnome 2 did.

 One possibility is to choose Gnome Classic mode when you log in to
 gnome.  This will give you something that looks like gnome 2 and you can
 get the old setup options.  After you configure not to auto-connect to a
 particular network, if you want to use gnome shell again, you can log
 out and log back in with that choice.

Thanks. That solved it.


-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbxb443lw+n2rn-r3hk6xesxda-ve4q4angqc3bn_tl...@mail.gmail.com

Re: Debian repository on external USB

[Umarzuki Mochlis]

2012/11/6 Glenn English g...@slsware.com:

 On Nov 6, 2012, at 12:54 AM, Muhammad Yousuf Khan wrote:

 any howto for debmirror would be appreciated.

 I'm sorry, but I don't have that. Google and man are going to have to be your 
 friends.

 --
 Glenn English




i had tried this article before and it works but i don't remember of
any specific modification(s) that i had to do
give it a try though

http://www.howtoforge.com/local_debian_ubuntu_mirror


-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbyO6ExPCODgxb30tHduvMhEDZ9Tf9J0TNERfqTkCUFK=a...@mail.gmail.com

Re: iceweasel cannot show pictures on facebook

[Umarzuki Mochlis]

2012/9/2 Camaleón noela...@gmail.com:
 El 2012-09-02 a las 15:38 +0800, Umarzuki Mochlis escribió:

 (resending to the list)

 2012/9/1 Camaleón noela...@gmail.com:

 
  I rarely visit facebook pages but I don't remember to have experienced
  that problem (using Firefox 15, lenny 64-bits).
 
  Check if any of these tips helps:
 
  http://support.mozilla.org/es/questions/751025
 
  Also, try by running Iceweasel from a new user which will load a
  completely fresh profile.


 found the solution:

 update time, it was off by almost 24 hours
 # ntpdate 0.pool.ntp.org

 just a hunch from past experience with windows servers

 ?

 You mean that Facebook images refused to load just because of
 out-of-sync time? First time I see it :-?


yessir! weird indeed!
i don't know how to explain it but i did not do anything else other than that.

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbzonvhpnrpeuzr7hruzdisp-jp3imfewavaohmmjpz...@mail.gmail.com

iceweasel cannot show pictures on facebook

[Umarzuki Mochlis]

iceweasel 15.0
debian 6.0.5 amd64

as the title, suddenly i cannot view pictures on facebook.com
on opera  epiphany, this does not happen

has anyone had this issue?

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbzKZVhxf2tTcqfyQ51DxY1HnSnA=qdxefabyw0+sp-...@mail.gmail.com

Re: How to setup Java Platform Plugin for Iceweasel 10.0.6

[Umarzuki Mochlis]

2012/8/5 Csanyi Pal csanyi...@gmail.com:


 I just installed openjdk-7-jdk but still get java version 1.6:
 $ java -version
 java version 1.6.0_24


you may need to use update-alternatives for that since now you have 2
versions of them installed

http://alexander.holbreich.org/2011/11/java-7-on-debian/



-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbziUJnX-PKNgnVwbhhCGH+Bq89qhZ8PaWj37=dnq5t...@mail.gmail.com

compile gctwiwax on squeeze

[Umarzuki Mochlis]

i tried to compile gctwimax and got below messages

umarzuki@v470:~/Downloads/gctwimax-0.0.3rc4$ make
cc -MMD -O2 -g -Wall -I. -I/usr/include -I/usr/include/eap_peer
-I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include
-DCONFDIR=/usr/share/gctwimax -DIEEE8021X_EAPOL   -c -o src/wimax.o
src/wimax.c
cc -MMD -O2 -g -Wall -I. -I/usr/include -I/usr/include/eap_peer
-I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include
-DCONFDIR=/usr/share/gctwimax -DIEEE8021X_EAPOL   -c -o
src/protocol.o src/protocol.c
cc -MMD -O2 -g -Wall -I. -I/usr/include -I/usr/include/eap_peer
-I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include
-DCONFDIR=/usr/share/gctwimax -DIEEE8021X_EAPOL   -c -o
src/logging.o src/logging.c
cc -MMD -O2 -g -Wall -I. -I/usr/include -I/usr/include/eap_peer
-I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include
-DCONFDIR=/usr/share/gctwimax -DIEEE8021X_EAPOL   -c -o
src/tap_dev.o src/tap_dev.c
cc -MMD -O2 -g -Wall -I. -I/usr/include -I/usr/include/eap_peer
-I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include
-DCONFDIR=/usr/share/gctwimax -DIEEE8021X_EAPOL   -c -o
src/eap_auth.o src/eap_auth.c
cc -MMD -O2 -g -Wall -I. -I/usr/include -I/usr/include/eap_peer
-I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include
-DCONFDIR=/usr/share/gctwimax -DIEEE8021X_EAPOL   -c -o src/config.o
src/config.c
cc  -o gctwimax src/wimax.o src/protocol.o src/logging.o src/tap_dev.o
src/eap_auth.o src/config.o -leap -lusb-1.0 -lcrypto -lz -ldbus-1
/usr/lib/gcc/x86_64-linux-gnu/4.4.5/../../../../lib/libeap.so:
undefined reference to `random_get_bytes'
collect2: ld returned 1 exit status
make: *** [gctwimax] Error 1

i had installed libusb-1.0-0-dev, libssl-dev, libdbus-1-dev, zlibc 
successfully compiled wpa_supplicant-1.0

what else that i need to do?

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbyrzindjs1ov8jqt-shpxxocwth9nmpqjutumcbkte...@mail.gmail.com

Re: black screen but have audio playing

[Umarzuki Mochlis]

2012/7/29 Camaleón noela...@gmail.com:
 El 2012-07-29 a las 02:07 +0800, Umarzuki Mochlis escribió:

 (resending to the list)

 2012/7/28 Camaleón noela...@gmail.com:
  On Sat, 28 Jul 2012 10:57:16 +0800, Umarzuki Mochlis wrote:
 
  Have you checked if it happens with all kind of video files? From ogg to
  mpeg, comercial DVD's, avi...  also, have you checked with VideoLAN? It
  uses its own codecs instead the system's one, so it can be a good test to
  discard a problem coming from the codecs.
 

 i checked with .ogg  .avi but none can show video, except audio
 strangely enough, streaming ogg via iceweasel works (built-in HTML5 
 capability?)
 already tried with smplayer  VLC but the same

 Streaming could be done from a flash player object or using the
 video tag of HTML5, only the code of the page you rendered can tell.

 More strange is that VLC fails to display the video because this fact
 will discard a missing plugin problem. Can you launch the video file from
 VLC using the command line? You can Use the debug parameter to get more
 info (vlc -vvv myfile.ogg). Also, check for the current video output
 under your preferences, it should be set to X11.

 Do commercial/self-made DVDs play fine or fail in the same way?

  What ffmpeg package do you have installed? Debian's stock or the one from
  D-M?
 

 i think its from official repo

 # dpkg --get-selections | grep ffmpeg
 gstreamer0.10-ffmpeg  install
 libxine1-ffmpeg   install

 # aptitude show gstreamer0.10-ffmpeg
 Package: gstreamer0.10-ffmpeg
 New: yes
 State: installed
 Automatically installed: yes
 Version: 0.10.10-1
 Priority: optional
 Section: video
 Maintainer: Maintainers of GStreamer packages
 pkg-gstreamer-maintain...@lists.alioth.debian.org

 # aptitude show libxine1-ffmpeg
 Package: libxine1-ffmpeg
 New: yes
 State: installed
 Automatically installed: yes
 Version: 1.1.19-2
 Priority: optional
 Section: video
 Maintainer: Darren Salt li...@youmustbejoking.demon.co.uk

 Yes, they come from the official repo, otherwise there will be a -bpo in
 the package's name (in addition, those packages are not available at
 D-M). Anyway, I don't think this is a plugin issue because if so, VLC
 would have no problem for getting video and also, an ogg video file
 wouldn't experience this.

  Mmm... Sandy Bridge uses to have dual VGA chipsets but anyway, vdpau is
  not nvidia specific. Do you have libvdpau1 installed? BTW, Google says
  that libvdpau_nvidia.so warning can be harmless.

 could it be a problem with the video driver?
 the built-in webcam that comes with this laptop (lenovo v470) also
 cannot show any video from Cheese

 The problem with webcam can be of a different nature, you will have to
 ensure your device is supported and modules are properly loaded. Also,
 you can try to get video from a different application such as Ekiga.

it seems that graphic module from backports isn't working well
when i switched to 2.6.32-5-amd64, video runs fine


-- 
Regards,

Umarzuki Mochlis
http://debmal.my


--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbxksmakzrn-nbwc5ewhfdwpkw85hfn4znqy0ljjzc_...@mail.gmail.com

black screen but have audio playing

[Umarzuki Mochlis]

on squeeze amd64, when i played video with totem  mplayer
- no video/screen is black
- only audio

video black, only sound

$ mplayer video.avi
MPlayer SVN-r31918 (C) 2000-2010 MPlayer Team
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

Playing video.avi.
AVI file format detected.
[aviheader] Video stream found, -vid 0
[aviheader] Audio stream found, -aid 1
VIDEO:  [XVID]  624x352  12bpp  23.976 fps  881.4 kbps (107.6 kbyte/s)
Clip info:
 Software: VirtualDubMod 1.5.10.2 (build 2540/release)
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
[VO_TDFXFB] This driver only supports the 3Dfx Banshee, Voodoo3 and Voodoo 5.
s3fb: Couldn't map S3 registers: Operation not permitted
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared
object file: No such file or directory
[vdpau] Error when calling vdp_device_create_x11: 1
==
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
==
==
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 48000 Hz, 2 ch, s16le, 384.0 kbit/25.00% (ratio: 48000-192000)
Selected audio codec: [ffac3] afm: ffmpeg (FFmpeg AC-3)
==
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
Movie-Aspect is 1.77:1 - prescaling to correct movie aspect.
VO: [xv] 624x352 = 624x352 Planar YV12
A:  31.5 V:  31.5 A-V: -0.011 ct: -0.024 757/757  1%  0%  0.4% 0 0

there's a nvidia related message but there's no nvidia vga on my laptop

# uname -a
Linux v470 3.2.0-0.bpo.2-amd64 #1 SMP Fri Jun 29 20:42:29 UTC 2012
x86_64 GNU/Linux

# lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Sandy Bridge
Integrated Graphics Controller (rev 09)

# glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: Mesa DRI Intel(R) Sandybridge Mobile

any tips/info?


-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbwSOSE3PbGh=hpzvew+_yyxrx7jug_ft9sunjktwf8...@mail.gmail.com

Re: mail server

[Umarzuki Mochlis]

2012/7/25 Muhammad Yousuf Khan sir...@gmail.com:
 need suggestions, i know there are few populer mail servers like
 postfix, sandmail etc out there.

 here is some details about my office.

 1. 20 users.
 2. pop from main server
 3. send via SMTP
 4. local mail distribution IMAP

 i am not looking in to easy or hard mail server. what i am looking is
 it should be good for my carrier and  for my office too.
 secure, stable, web base console etc.

 btw, i have heard that there is a mailserver called zimbra. but i
 think debian is not natively supporting it.

 any help would be appreciable.


check iredmail. Easy to install.

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbx3hMuBRqx8YrSCnum8Y=z8yt_g9sw7+7si2lto7ux...@mail.gmail.com

gpg signature ssh keys

[Umarzuki Mochlis]

hi,

can my gpg signature  ssh keys (public  private) be imported to a
new installation of debian just by synching my home folder (same user
as in the new system)?

thanks.

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbxzhbPtUJQb2r4w0TcSnyeGs7HyPyjTyW5q3=tr_-y...@mail.gmail.com

Re: gpg signature ssh keys

[Umarzuki Mochlis]

2012/7/25 Gaël DONVAL gael.don...@cnrs-imn.fr:

 can my gpg signature  ssh keys (public  private) be imported to a
 new installation of debian just by synching my home folder (same user
 as in the new system)?


 Yes. Your public and private ssh keys should be in ~/.ssh
 Your gpg keys should be in ~/.gnupg

 As long as you copy these two folders to your new debian installation,
 everything should be alright.

 If you are using gnome, you might also want to copy seahorse keyrings
 (in ./gnome2 last time I checked, but that might have changed).

 To sum up, if you copy your whole user directory to a new installation,
 everything should be right where you left them.


thanks for the confirmation

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbzwA5Qs4PZRsE1eox5Fi5=+5tmqp_ikklsfpsyvwm8...@mail.gmail.com

Re: pidgin ym protocol over ssl

[Umarzuki Mochlis]

2012/7/23 Mika Suomalainen mika.henrik.mai...@hotmail.com:
 -BEGIN PGP SIGNED MESSAGE-
 Hash: SHA512

 Hi,

 On 23.07.2012 07:01, Umarzuki Mochlis wrote:
 hi,

 is it possible to configure pidgin to connect to ym via ssl this is
 because there's an issue at my office where a colleague's message
 had been logged by a network staff

 I'm not sure what protocol is ym, but in case you cannot connect to it
 with SSL, you could enable encryption in Pidgin.

 # aptitude install pidgin-otr pidgin-openpgp

 and then enable them in Pidgin plugins menu and you should be able to
 encrypt using PGP (or GPG) and OTR.

 I think that OTR is more popular than PGP with IM encryption.


thanks for this valuable information

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbyc191au8-duknilis5gb7z1pffs2rbrx919klxxog...@mail.gmail.com

pidgin ym protocol over ssl

[Umarzuki Mochlis]

hi,

is it possible to configure pidgin to connect to ym via ssl
this is because there's an issue at my office where a colleague's
message had been logged by a network staff

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mby2spp9k1cl3vo8lmqwfjn5oahp43czcn2dg_jy1wd...@mail.gmail.com

Re: wireless not working correctly after upgrading kernel

[Umarzuki Mochlis]

2012/7/20 Brian a...@cityscape.co.uk:
 On Fri 20 Jul 2012 at 17:37:26 +0800, Umarzuki Mochlis wrote:

 02:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000

 Non-free firmware is needed. I suppose you have installed it?

http://wiki.debian.org/iwlwifi


yes I have. I even reinstalled it but the result was the same.


-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbwZaFToH3z+n8OwvdpZ4sT6yevGf=cndldyecpxmm3...@mail.gmail.com

Re: wireless not working correctly after upgrading kernel

[Umarzuki Mochlis]

2012/7/20 Camaleón noela...@gmail.com:
 On Fri, 20 Jul 2012 16:59:05 +0800, Umarzuki Mochlis wrote:

 a little background and what i did to have come to this situation:

 - cannot get resolution more than 1024x768 with my integrated intel vga
 - upgraded to kernel 3.0 from squeeze-backports
 - my intel wireless 1000 N wireless interface can connect to a wireless
 network but cannot even ping gateway

 (...)

 So the wireless network is configured but you cannot go out? Can you
 even ping a local machine, I mean, a computer located in your network
 other than the gateway?

 Run the following commands and send here the ouput:

 /sbin/ifconfig
 ip ro
 dmesg | grep -i iw
 ping -c 3 8.8.8.8
 host google.com


weirdly enough, after a reboot at my house's wireless network, I can
connect to the internet.

i can't be sure if this is because of my office's wireless network or
the reboot.


-- 
Regards,

Umarzuki Mochlis
http://debmal.my


--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mby-WsH8e=_06lq4yonkut3g1vhsm-lydulum_5kmdn...@mail.gmail.com

is there a problem with flashplugin-nonfree on squeeze amd64?

[Umarzuki Mochlis]

# aptitude reinstall flashplugin-nonfree
The following packages will be REINSTALLED:
  flashplugin-nonfree
0 packages upgraded, 0 newly installed, 1 reinstalled, 0 to remove and
1 not upgraded.
Need to get 0 B/17.9 kB of archives. After unpacking 0 B will be used.
(Reading database ... 109152 files and directories currently installed.)
Preparing to replace flashplugin-nonfree 1:2.8.2 (using
.../flashplugin-nonfree_1%3a2.8.2_amd64.deb) ...
Unpacking replacement flashplugin-nonfree ...
Processing triggers for man-db ...
Setting up flashplugin-nonfree (1:2.8.2) ...
ERROR: wget failed to download
http://people.debian.org/~bartm/flashplugin-nonfree/fp10.sha512.amd64.pgp.asc
More information might be available at:
  http://wiki.debian.org/FlashPlayer

from the wiki, it suggests me to install from Sid

does this means that there's no working solution so far for this problem?

thanks.

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbwkecs0d1pvfpgfd-mg5yjugdzjhoctd-uhyxjxleo...@mail.gmail.com

Re: is there a problem with flashplugin-nonfree on squeeze amd64?

[Umarzuki Mochlis]

2012/7/19 Camaleón noela...@gmail.com:
 On Thu, 19 Jul 2012 17:59:51 +0800, Umarzuki Mochlis wrote:



 Can you manually fetch the file? It works fine here.


thanks for this hint Cameleon

apparently the ISP (Telekom Malaysia) blocked people.debian.org (why?).

so I changed DNS from DHCP to google's (8.8.8.8) and can finally
installed flashplugin-nonfree


-- 
Regards,

Umarzuki Mochlis
http://debmal.my


--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbz+fwaczzicprxgyf3ygfvzofzrz0uquwtp50pbpco...@mail.gmail.com

openjdk jre - iceweasel plugin

[Umarzuki Mochlis]

Hi,

I installed default-jre on Squeeze amd64, but java plugin does not
show on about:plugins of iceweasel 10.0.5

# java -version
java version 1.6.0_18
OpenJDK Runtime Environment (IcedTea6 1.8.13) (6b18-1.8.13-0+squeeze2)
OpenJDK 64-Bit Server VM (build 14.0-b16, mixed mode)

# aptitude show iceweasel
Package: iceweasel
State: installed
Automatically installed: no
Version: 10.0.5esr-1~bpo60+1
Priority: optional
Section: web
Maintainer: Maintainers of Mozilla-related packages
pkg-mozilla-maintain...@lists.alioth.debian.org
Uncompressed Size: 6,536 k
Depends: libc6 (= 2.4), libglib2.0-0 (= 2.16.0), libgtk2.0-0 (= 2.10),
 libnspr4 (= 2:4.9-2~) | libnspr4-0d (= 1.8.0.10), libstdc++6 (=
 4.1.1), fontconfig, procps, debianutils (= 1.16), xulrunner-10.0 (=
 10.0.5esr-1~bpo60+1), libsqlite3-0 (= 3.7.12-1~)
Suggests: fonts-lyx | ttf-lyx | latex-xft-fonts, xfonts-mathml,
  ttf-mathematica4.1, mozplugger, libgssapi-krb5-2 | libkrb53
Provides: gnome-www-browser, www-browser
Description: Web browser based on Firefox
 Iceweasel is Firefox, rebranded. It is a powerful, extensible web browser with
 support for modern web application technologies.

Any step that I would've missed?
Thanks.

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbwzkg66cgkx9zutequbja0bv3uylz7pj0htdxvhmox...@mail.gmail.com

Re: openjdk jre - iceweasel plugin

[Umarzuki Mochlis]

2012/7/20 Brad Rogers b...@fineby.me.uk:
 On Thu, 19 Jul 2012 23:53:12 +0800
 Umarzuki Mochlis umarz...@gmail.com wrote:

 Hello Umarzuki,

I installed default-jre on Squeeze amd64, but java plugin does not
show on about:plugins of iceweasel 10.0.5
 {snip}
Any step that I would've missed?

 You seem to have neglected to install icedtea-6-plugin.


thanks. that worked. wasted my time assumted  on from the output of
java -version



-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbxKYLjvBU9+1iX_1rDtG0t5cqDfN9CH=irp5zzqg5l...@mail.gmail.com

Re: SAMBA share permission via openldap

[Umarzuki Mochlis]

2012/7/7 Camaleón noela...@gmail.com:
 On Fri, 06 Jul 2012 12:58:18 +0800, Umarzuki Mochlis wrote:

 Could anyone suggest a good management interface (WUI) available in
 debian squeeze repo/third party to manage SAMBA shared folder for
 openldap users?

 Not a recommendation but a list of available tools for your review:

 http://wiki.samba.org/index.php/Samba_%26_LDAP#GUI_Tools

 Mmm, at Debian standard repositories I can see luma, jxplorer,
 ldaptor-webui and gosa, not sure if any of these would be of your
 liking.

 I, being a java-lover (I specially like java for small applications that
 can be put in portable USB flash keys and used in multiple operating
 systems), would start with jxplorer O:-)


thanks for the suggestion, i will check them out

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbxcyuzddw1-ynghstvkt8kwxg7lt_enkajuwrtqe-3...@mail.gmail.com

getting ldap info for user authentication

[Umarzuki Mochlis]

Hi,

I installed ownCloud on Squeeze and want to get these info to get
users from zimbra-ldap (openldap) to be used as login user for
owncloud

Host: (i assume openldap server's IP)
Base: (i assume dc=mydomain,dc=com as per email's domain)
Name:
Password:
User Login Filter:
User List Filter:
Group Filter:

Thanks for any hints/tips.


-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbyGXfiP+=j0BLLNH=F1Ogte6LKkcTDc=d4zcqmorwg...@mail.gmail.com

SAMBA share permission via openldap

[Umarzuki Mochlis]

Hi,

Could anyone suggest a good management interface (WUI) available in
debian squeeze repo/third party to manage SAMBA shared folder for
openldap users?

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbydhjhfh91yxkq-j_pwhgm7u6u-1+7vrpyr4kiodyz...@mail.gmail.com

Re: DVD burning within VirtualBox VM

[Umarzuki Mochlis]

2012/7/5 T o n g mlist4sunt...@yahoo.com:
 Hi,

 I think DVD burning would be possible within the VirtualBox VM. Can
 anyone confirm that?

 The host is Win7, and I don't like Windows' DVD burning solution at all.

 Thanks


it is possible and i had done that because debian detects blank dvd on
my external dvdburner as corrupted


-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbxf+afrfgu3bjaznreesquwrvzoaq0xnrdsq9kxark...@mail.gmail.com

Re: backuppc failed full backup of itself

[Umarzuki Mochlis]

2012/6/27 Keith McKenzie km3...@gmail.com:
 The system isn't backed up normally, as you would have installation
 media to restore it; you would just backup configuration. Having said
 that, if you do want to back it up, use a  live media, not the running
 system.

 (Usually it is only your data that is irreplaceable.)


thanks.
since the backup server is a VMware VM, might as well back it up using VDR



-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbzi2g+ivrqfyvp1zc42w1cbgwgmx4cgk3vs+ka1zmg...@mail.gmail.com

cannot edit ms/FrontPage

[Umarzuki Mochlis]

after logged as on wiki page  i edited wiki FrontPage for Malay
language (http://wiki.debian.org/ms/FrontPage), it says

You can't change ACLs on this page since you have no admin rights on it!

before this I can edit it.

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbzNkK3sMsmMS3_d0bfT=ldzc+ofg0_popwyf2ewq2i...@mail.gmail.com

Re: cannot edit ms/FrontPage

[Umarzuki Mochlis]

2012/7/1 Camaleón noela...@gmail.com:
 On Sun, 01 Jul 2012 22:00:37 +0800, Umarzuki Mochlis wrote:

 after logged as on wiki page

 Then the question will be better answered in debian-www mailing list or:

 http://wiki.debian.org/DebianWiki/Contact

 :-)

  i edited wiki FrontPage for Malay language (http://wiki.debian.org/ms
/FrontPage), it says

 You can't change ACLs on this page since you have no admin rights on
 it!

 before this I can edit it.

 I see no ACL rules set forth in the template :-?

 But the page was last edited three years ago (!), maybe something changed
 in that time, I would contact the wiki admins.


thanks, I'll check with #debian-www


-- 
Regards,

Umarzuki Mochlis
http://debmal.my


--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbyZf9N4=hBYEOdo=quyrmrgl90kch_c5szvbhsadxz...@mail.gmail.com

Re: areca backup folder to samba shared folder

[Umarzuki Mochlis]

2012/6/27 Camaleón noela...@gmail.com:
 On Wed, 27 Jun 2012 00:12:17 +0800, Umarzuki Mochlis wrote:

 2012/6/26 Camaleón noela...@gmail.com:
 On Tue, 26 Jun 2012 15:06:55 +0800, Umarzuki Mochlis wrote:

 I found that on my Debian amd64 laptop (have not tried 32-bit version
 yet) that I cannot set mounted samba shared folder as local folder.
 But this can be done on Windows 2003  Windows 7.

 Any workaround? Or maybe I had missed a thing or two?

 Uh? Yes, you should can :-?

 How did you setup the samba share local folder? IIRC, you have to use
 cifs (mount -t cifs ...). Once you have check the manual mount point is
 nicely done and works as you want you can add the samba share to your
 / etc/fstab so it gets mounted on every boot.

 maybe it cannot be used because i use nautilus to mount the samba share
 folder instead of command line?

 To use Areca Backup I recall that you needed a samba volume mounted
 locally, yes. If Nautilus is accesing the share via smb:// the trick
 does not work (in fact, that's one of the reasons I stopped using Areca's
 solution :-) )


do you have any suggestion for open source backup software that can
backup to samba  do block level backup while the source is still
running?

preferrably would be able to run on linux and windows client

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbwOfOt3M9FLxPx31pN+cwjAQ4YQxG-k=bhq70aws4t...@mail.gmail.com

areca backup folder to samba shared folder

[Umarzuki Mochlis]

Hi,

I found that on my Debian amd64 laptop (have not tried 32-bit version
yet) that I cannot set mounted samba shared folder as local folder.
But this can be done on Windows 2003  Windows 7.

Any workaround? Or maybe I had missed a thing or two?

Thanks.

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbw05mxzes7dlndkdkhaig6mtgnd2mg431k9j0fibai...@mail.gmail.com

Re: areca backup folder to samba shared folder

[Umarzuki Mochlis]

2012/6/26 Camaleón noela...@gmail.com:
 On Tue, 26 Jun 2012 15:06:55 +0800, Umarzuki Mochlis wrote:

 I found that on my Debian amd64 laptop (have not tried 32-bit version
 yet) that I cannot set mounted samba shared folder as local folder. But
 this can be done on Windows 2003  Windows 7.

 Any workaround? Or maybe I had missed a thing or two?

 Uh? Yes, you should can :-?

 How did you setup the samba share local folder? IIRC, you have to use
 cifs (mount -t cifs ...). Once you have check the manual mount point is
 nicely done and works as you want you can add the samba share to your /
 etc/fstab so it gets mounted on every boot.

maybe it cannot be used because i use nautilus to mount the samba
share folder instead of command line?


-- 
Regards,

Umarzuki Mochlis
http://debmal.my


--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbxRb4Bc1uPj3EtSr9aVwtPhV1bdoWoT4-JL_fhs=0x...@mail.gmail.com

any good xen web interface?

[Umarzuki Mochlis]

hi,

i want to know if there's an active open source xen web interface that
is easy to use that includes:

- VM creation, editing  anything related
- storage management
- cluster configuration (optional)

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbxQDK8PnKe3UeWxjJcMaTpg7myLog1-mADYwqcJd=q...@mail.gmail.com

backuppc failed full backup of itself

[Umarzuki Mochlis]

# aptitude show backuppc | grep Version
Version: 3.1.0-9.1

# uname -a
Linux backuppc 2.6.32-5-686 #1 SMP Sun May 6 04:01:19 UTC 2012 i686 GNU/Linux

using default backup setting for localhost, it failed full backup with
below error messages:

Contents of file /var/lib/backuppc/pc/localhost/XferLOG.0.z, modified
2012-06-27 12:12:04 (Extracting only Errors)

Running: /usr/bin/env LC_ALL=C /bin/tar -c -v -f - -C /etc --totals .
full backup started for directory /etc
Xfer PIDs are now 26309,26308
/bin/tar: ./exim4/passwd.client: Cannot open: Permission denied
[ skipped 64 lines ]
/bin/tar: ./default/cacerts: Cannot open: Permission denied
[ skipped 59 lines ]
/bin/tar: ./shadow-: Cannot open: Permission denied
/bin/tar: ./gshadow-: Cannot open: Permission denied
[ skipped 260 lines ]
/bin/tar: ./ssl/private: Cannot open: Permission denied
/bin/tar: ./sudoers.d/README: Cannot open: Permission denied
/bin/tar: ./dbconfig-common/bacula-director-mysql.conf: Cannot open:
Permission denied
/bin/tar: ./dbconfig-common/config: Cannot open: Permission denied
[ skipped 383 lines ]
/bin/tar: ./X11/Xwrapper.config: Cannot open: Permission denied
[ skipped 274 lines ]
/bin/tar: ./passwd-: Cannot open: Permission denied
[ skipped 70 lines ]
/bin/tar: ./ssh/ssh_host_dsa_key: Cannot open: Permission denied
/bin/tar: ./ssh/ssh_host_rsa_key: Cannot open: Permission denied
/bin/tar: ./gshadow: Cannot open: Permission denied
/bin/tar: ./snmp/snmptrapd.conf: Cannot open: Permission denied
/bin/tar: ./snmp/snmpd.conf: Cannot open: Permission denied
/bin/tar: ./mysql/debian.cnf: Cannot open: Permission denied
/bin/tar: ./.pwd.lock: Cannot open: Permission denied
/bin/tar: ./security/opasswd: Cannot open: Permission denied
/bin/tar: ./rkhunter.conf: Cannot open: Permission denied
[ skipped 78 lines ]
/bin/tar: ./at.deny: Cannot open: Permission denied
[ skipped 149 lines ]
/bin/tar: ./sudoers: Cannot open: Permission denied
/bin/tar: ./apt/secring.gpg: Cannot open: Permission denied
/bin/tar: ./apt/trusted.gpg~: Cannot open: Permission denied
/bin/tar: ./apt/trustdb.gpg: Cannot open: Permission denied
/bin/tar: ./apt/trusted.gpg: Cannot open: Permission denied
[ skipped 137 lines ]
/bin/tar: ./shadow: Cannot open: Permission denied
/bin/tar: ./bacula/common_default_passwords: Cannot open: Permission denied
/bin/tar: ./bacula/bacula-sd.conf: Cannot open: Permission denied
/bin/tar: ./bacula/bacula-fd.conf: Cannot open: Permission denied
/bin/tar: ./bacula/bconsole.conf: Cannot open: Permission denied
/bin/tar: ./bacula/bacula-dir.conf: Cannot open: Permission denied
/bin/tar: ./lvm/backup: Cannot open: Permission denied
/bin/tar: ./lvm/archive: Cannot open: Permission denied
[ skipped 123 lines ]
/bin/tar: ./lvm/cache: Cannot open: Permission denied
/bin/tar: ./group-: Cannot open: Permission denied
[ skipped 1 lines ]
/bin/tar: Exiting with failure status due to previous errors
Tar exited with error 512 () status
[ skipped 125 lines ]
tarExtract: Done: 0 errors, 1548 filesExist, 3291490 sizeExist,
1017707 sizeExistComp, 1549 filesTotal, 3293764 sizeTotal
Got fatal error during xfer (Tar exited with error 512 () status)
Backup aborted (Tar exited with error 512 () status)
Saving this as a partial backup

i tried adding user root to this host's setting as 'other users' but
still the same


-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbxroe6_2tkkqxtky3xwcmvfvxza6x2byv_kz0734yz...@mail.gmail.com

Re: round-robin mx and nginx proxy

[Umarzuki Mochlis]

2012/6/22 Richard Hector rich...@walnut.gen.nz:


 Wait - is this https or SMTP? MX records will only affect SMTP, and the
 question seemed to relate to https. I got the impression that the fact
 that the servers also ran MTAs was incidental.

 Still, the issue will relate to what IP address comes back from a query,
 and how long it's cached by the client (and intervening name servers).


it seemed that i had asked a wrong question

this concerns more on the reverse-proxy by provided by nginx that
supposed to load-balance between 2 reverse-proxe servers which
coinidentally MTA servers


-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbxtrhdgp4vmbyjcavroubpokr+mnn08hbzqlrpetg_...@mail.gmail.com

Re: round-robin mx and nginx proxy

[Umarzuki Mochlis]

2012/6/25 Umarzuki Mochlis umarz...@gmail.com:
 2012/6/22 Richard Hector rich...@walnut.gen.nz:


 Wait - is this https or SMTP? MX records will only affect SMTP, and the
 question seemed to relate to https. I got the impression that the fact
 that the servers also ran MTAs was incidental.

 Still, the issue will relate to what IP address comes back from a query,
 and how long it's cached by the client (and intervening name servers).

 it seemed that i had asked a wrong question

 this concerns more on the reverse-proxy by provided by nginx that
 supposed to load-balance between 2 reverse-proxe servers which
 coinidentally MTA servers

my bad, that supposed to go like this:

this concerns more on the reverse-proxy by provided by nginx that
supposed to be load-balanced between 2 reverse-proxy servers which
coincidentally are MTA servers.


-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbx3o8j1Jj=tVDHy7e_usZUy6VBATuUj33AFfhoedjm=r...@mail.gmail.com

delta block backup

[Umarzuki Mochlis]

Hi,

I want to backup my Documents folder using Areca Backup and I want to
know if one full backup (once a month) and daily delta blocks backup
to office's network folder would be enough for a successful restore if
my laptop have a drive failure?

From what I understand, delta blocks backup is a more efficient for
saving storage space, isn't it?

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbyenK=NXnoVDhSw+nq8=kitNvZJh=9cyuxv+dykvj-...@mail.gmail.com

Re: bash related question, adding variable into path

[Umarzuki Mochlis]

2012/6/23 Keith McKenzie km3...@gmail.com:
 I think maybe put ; after the first command before issuing the second
 command mkdir

 id=`/opt/zimbra/bin/mysql -e 'use zimbra;select id,comment from
 mailbox;' | grep $username | cut -f 1` ; mkdir /tmp/$username
 2/dev/null

 /or, possibly you need to escape your statement

 id=`/opt/zimbra/bin/mysql -e \'use zimbra;select id,comment from
 mailbox;\' | grep $username | cut -f 1` ; mkdir /tmp/$username
 2/dev/null

thanks
but on my code it is actually on a newline

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbwzOdkhhfONhVXpTomjzbz73TkM6dOWC82zeHq=8zs...@mail.gmail.com

Re: bash related question, adding variable into path

[Umarzuki Mochlis]

2012/6/22 Camaleón noela...@gmail.com:
 On Fri, 22 Jun 2012 12:34:40 +0800, Umarzuki Mochlis wrote:

 #!/bin/bash
 echo Username? then [ENTER]:
 read username
 id=`/opt/zimbra/bin/mysql -e 'use zimbra;select id,comment from mailbox;' | 
 grep $username | cut -f 1` mkdir /tmp/$username 2/dev/null
 for i in `egrep '(1[8-9]|2[0-2]) Jun 2012'
 /opt/zimbra/store/0/$id/msg/0/* | cut -d : -f 1 | uniq` do
 cp $i /tmp/$username
 done

 there must be something that i had missed...

 Print/echo the $id variable to check for its current value as seen in
 runtime by your script :-?


i had checked with echo that $id indeed output a id and running

if i put the id value exactly as output of /opt/zimbra/bin/mysql -e
'use zimbra;select id,comment from mailbox;' | grep $username | cut -f
1, it worked

what else could should i look for?
-- 
Regards,

Umarzuki Mochlis
http://debmal.my


--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mby7dtggtuyveoaetagmvspgyqayvpvz52nnfknmb7m...@mail.gmail.com

pandorafms on debian

[Umarzuki Mochlis]

when i tried to install pandorafms.server_4.0.1.deb on squeeze 32-bit,
below message appeared:

# dpkg -i pandorafms.server_4.0.1.deb
Selecting previously deselected package pandorafms-server.
(Reading database ... 41432 files and directories currently installed.)
Unpacking pandorafms-server (from pandorafms.server_4.0.1.deb) ...
dpkg: dependency problems prevent configuration of pandorafms-server:
 pandorafms-server depends on snmp-mibs-downloader; however:
  Package snmp-mibs-downloader is not installed.
dpkg: error processing pandorafms-server (--install):
 dependency problems - leaving unconfigured
Processing triggers for man-db ...
Errors were encountered while processing:
 pandorafms-server

but when i tried to satisfy its dependency, apt want to remove server's package

# apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following packages will be REMOVED:
  pandorafms-server
0 upgraded, 0 newly installed, 1 to remove and 1 not upgraded.
1 not fully installed or removed.
After this operation, 655 kB disk space will be freed.
Do you want to continue [Y/n]?

how would i be able to install pandora on squeeze?

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mby3cnumtt6j8rqagfqssa2uee6hgry9e+k5vk4jruk...@mail.gmail.com

Re: pandorafms on debian

[Umarzuki Mochlis]

2012/6/21 Umarzuki Mochlis umarz...@gmail.com:
 when i tried to install pandorafms.server_4.0.1.deb on squeeze 32-bit,
 below message appeared:

 # dpkg -i pandorafms.server_4.0.1.deb
 Selecting previously deselected package pandorafms-server.
 (Reading database ... 41432 files and directories currently installed.)
 Unpacking pandorafms-server (from pandorafms.server_4.0.1.deb) ...
 dpkg: dependency problems prevent configuration of pandorafms-server:
  pandorafms-server depends on snmp-mibs-downloader; however:
  Package snmp-mibs-downloader is not installed.
 dpkg: error processing pandorafms-server (--install):
  dependency problems - leaving unconfigured
 Processing triggers for man-db ...
 Errors were encountered while processing:
  pandorafms-server

 how would i be able to install pandora on squeeze?

my bad
just found out that snmp-mibs-downloader is in non-free

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbz5x0mq+ytthyiqtopjdp0z18izh3udel45-svdhs9...@mail.gmail.com

round-robin mx and nginx proxy

[Umarzuki Mochlis]

I need general help on a multi-server setup with

2 MTAs (each also a nginx reverse-proxy)
2 mailbox servers (round-robin)

when i check nginx.log on both MTA, only the second MTA got https
connection (zimbra support also confirmed this) and it seems that this
might caused by DNS setup or related network configuration

how do I pinpoint as to where the root cause might be?
-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbwvrCYnO2hk1_WPjnPKnHL3qeyG5=aoe1a6f1s8epm...@mail.gmail.com

Re: any stable open source ldap software for SSO

[Umarzuki Mochlis]

2012/6/22 Camaleón noela...@gmail.com:
 On Wed, 20 Jun 2012 10:30:57 -0400, John A. Sullivan III wrote:



 If you're replying to my post you removed too much of the quoted text ;-)

 I admit that I have never extensively used OpenLDAP but, when we did our
 initial research, the feedback seemed to be that it could be unwieldy to
 manage and that the support had a tendency to be cantankerous and
 arrogant.  In contrast, the Directory Server support has been amazing
 both on the mailing lists and on IRC - John

 So you mean one of the reasons that lead you to the change (in your case)
 was not specifically a technical one nor limited capability of the
 OpenLDAP solution but more a support issue?

 That's also something important to take into account, mainly when you're
 going to deploy a large installation for a company. Good to know.


by the Directory Server, you meant 389 Directory Server??

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbxqjg5etxt83dqgkx3rveovhjifz4twbxhnv3s5ur4...@mail.gmail.com

Re: round-robin mx and nginx proxy

[Umarzuki Mochlis]

2012/6/21 Darac Marjal mailingl...@darac.org.uk:
 On Thu, Jun 21, 2012 at 03:54:28PM +0800, Umarzuki Mochlis wrote:

 I think I would first start by checking the output of repeated calls to
 dig +short mx yourdomain.example.org. This should vary, with your
 servers swapping positions each time.

 If you only get the same output each time, then it's down to the sending
 MTA to pick an appropriate MX from the list. I assume both your MXs have
 the same priority; in that case the sending SMTP should pick one at
 random and, if that fails, try the other. Note here, that if you're
 using round-robin AND same-priority MXs, both are picking the order at
 random.
thanks,

i also need to know how I would be able to investigate the flow of
emails. What I had tried so far:

dig +short mx reveals that from outside, users would hit barracuda MTA first
then barracuda would forward (or so i thought) to a MailScanner
(barracuda's outbound smtp host setting)

but how do I check that MailScanner (installed on top of centos 5)
forwards emails to those 2 MTA+proxy servers?

email system is working at the moment, fortunately.

mail flow that i assumed from outside:
user - barracuda - mailscanner - second zimbra MTA+proxy server -
one of two mailbox servers (via its public name)

thanks

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbz2eSNmVwa=-hwx_d52ee-splb7xad7unrxru8v+jb...@mail.gmail.com

bash related question, adding variable into path

[Umarzuki Mochlis]

below scripts stuck when i added id variable to a path.

this script supposed to copy message files (from 18-22 june) from a
zimbra store/mailbox of a user and copied it into /tmp

#!/bin/bash
echo Username? then [ENTER]:
read username
id=`/opt/zimbra/bin/mysql -e 'use zimbra;select id,comment from
mailbox;' | grep $username | cut -f 1`
mkdir /tmp/$username 2/dev/null
for i in `egrep '(1[8-9]|2[0-2]) Jun 2012'
/opt/zimbra/store/0/$id/msg/0/* | cut -d : -f 1 | uniq`
do
cp $i /tmp/$username
done

there must be something that i had missed...

thanks
-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbw+hdiphHS+G_=4zta8zdagy9afvmruaq4tvvrm5+k...@mail.gmail.com

any stable open source ldap software for SSO

[Umarzuki Mochlis]

this is for a organization with 2000+ windows 7  windows xp desktops
and multiple file sharing softwares

any idea aside openldap?

have anyone configured openldap for the above situation?

any gotchas when working with windows 2003 and 2008 servers?

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbxq+zd2tg03te2gqjp5pbdcwuckwpftjmjwpbfqans...@mail.gmail.com

email tail output

[Umarzuki Mochlis]

hi,

a newbie question:

from what i heard that mail command does not need to have mail service
running, right?

so i tried below command from my laptop just to check if i can put
similar command in crontab later then i wouldn't have to log in to a
server just to check if a process failed

$ tail /var/mail/user | mail -s system mail on `date +%F` u...@domain.com

but the email does not arrive at u...@domain.com. Is there any
possibility that the mail could be blocked because i could not find it
in mailq?

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbwduyjqlqwqsrq-cxuhqi4qnn_6ydp3bhtu7m68eah...@mail.gmail.com

set nameserver on boot in /etc/network/interfaces

[Umarzuki Mochlis]

hi,

i could not find documentation about which package to enable setting
nameserver ip (dns client) upon boot from /etc/network/interfaces

can anyone point me to the right direction?

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbx=n2Cu-PBN_=6i7ZCtZdaTQfKDbUvW=v9UUu=kvke...@mail.gmail.com

Re: set nameserver on boot in /etc/network/interfaces

[Umarzuki Mochlis]

Pada 29 Mac 2012 10:49 PTG, Camaleón noela...@gmail.com menulis:
 On Thu, 29 Mar 2012 22:32:53 +0800, Umarzuki Mochlis wrote:

 i could not find documentation about which package to enable setting
 nameserver ip (dns client) upon boot from /etc/network/interfaces

 can anyone point me to the right direction?

 What's what you understand for nameserver ip (dns client)? A DNS server?

 5.5.5. The network interface with the static IP
 http://www.debian.org/doc/manuals/debian-reference/ch05.en.html#_the_network_interface_with_the_static_ip

 ***
 dns-nameservers ip.of.domain.server
 ***

 Note that you will need the resolvconf package. Otherwise you can use
 /etc/resolv.conf file and put it there.


thanks, this is what i was trying to find


-- 
Regards,

Umarzuki Mochlis
http://debmal.my


--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbwosAZUCboUPPRjS9pKUR0JMtHALcUXhsq=aomzwwr...@mail.gmail.com

Re: aptitude failure to fetch

[Umarzuki Mochlis]

Pada 25 Mac 2012 4:35 PTG, Tony Baldwin t...@tonybaldwin.org menulis:
 Aptitude is not fetching updates.
 (neither is apt-get).

 I see
 W: Failed to fetch
 http://security.debian.org/dists/squeeze/updates/Release  Unable to find
 expected entry  experimental/binary-amd64/Packages in Meta-index file
 (malformed Release file?)

 E: Some index files failed to download, they have been ignored, or old
 ones used instead.


have you tried:

apt-get clean
apt-get autoremove
apt-get update

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbymew8fjzl4okjgtog3stjkx_g0eoi8y8sx5ytsr1o...@mail.gmail.com

Re: [OT] what is the correct way of setting up lvm

[Umarzuki Mochlis]

Pada 19 Mac 2012 1:26 PG, Arno Schuring aelschur...@hotmail.com menulis:


 I don't see anything obviously wrong, but using lvextend on a new VG
 isn't really necessary. I'd have used
 # lvcreate -n mailbackup -l 100%VG backup

 The remount action may have been triggered because of a communication
 error between the host and the san. Were you sharing the iscsi target
 between multiple hosts?


 Regards,
 Arno


yes. but it was on a SAN. supposed for a 2+1 setup where the standby
server could mount this volume whenever the current node got fenced.

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbwh17fh8j4t5ggolm8u+fytv-thfvt70gy_n7leuaf...@mail.gmail.com

[OT] what is the correct way of setting up lvm

[Umarzuki Mochlis]

this not a debian issue but a general linux issue

i had set a LUN (e.g.: /dev/sdb) that can be seen from a server but
after some time (rsync to this logical volume) it got remounted
read-only and there's unlinked-inode from dmesg.

my method of creating a ext3 logical volume is

# pvcreate /dev/sdb
# vgcreate backup /dev/sdb
# lvcreate -n mailbackup --size 1200g backup
# lvextend -l +100%FREE /dev/backup/mailbackup
# mkfs.ext3 /dev/backup/mailbackup

i just want to know whether my method is the cause of this problem

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbzWZPnwD3=hFn0OO-cWqeH+nDXZqJieCK=5rsohkh7...@mail.gmail.com

Re: Upgrade problem

[Umarzuki Mochlis]

Pada 16 Februari 2012 5:27 PTG, Petr Osanve Vytovtov
osanve...@gmail.com menulis:
 Hello!

 I use Debian testing amd64 and I have next problem.
 When I write command aptitude upgrade it returns next:
 Resolving dependencies...
 No packages will be installed, upgraded, or removed.
 0 packages upgraded, 0 newly installed, 0 to remove and 71 not upgraded.
 Need to get 0 B of archives. After unpacking 0 B will be used.
 Command aptitude update doesn't help.
 Why is it so?

 Thanks in advance!

because you used aptitude to prevent incompatibility on certain apps
on your debian testing.

you are using testing, remember.

if you brave enough, try 'aptitude full-upgrade'

-- 
Regards,

Umarzuki Mochlis
http://debmal.my


-- 
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org 
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/cahw9mbwheknuqe5nhk+3hz0yb-5+btzuraeq6l18xdkh8mu...@mail.gmail.com

Re: Nvidia Geforce GT 520

[Umarzuki Mochlis]

2012/1/25 Arno - arno...@gmail.com

 I wish to install Debian 6.0.3. (64 bit) on my PC. I have a Nvidia Geforce GT 
 520, which is not on the Debian Hardware compatibility list. I'm a new user 
 and not familiar with Debian. I would be very grateful if you could give me 
 clear, step by step instructions. The messages published about this topic are 
 not understandable for a noviced like me. Sorry.

 Thank you so much!

try sgfxi
after stopping gdm3 with below command as root

/etc/init.d/gdm3 stop

while connecting to the internet, from terminal, use below commands:

cd /usr/local/bin
wget -Nc smxi.org/sgfxi
chmod +x sgfxi
sgfxi


--
Regards,

Umarzuki Mochlis
http://debmal.my


--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Archive: 
http://lists.debian.org/CAHW9mbxapQC1hpq39MyRufRjaVrnTQ=gw=p3uclj9bzvlwv...@mail.gmail.com

Re: Just what does _DEBIAN_ mean by live

[Umarzuki Mochlis]

  Yes. A so-called live CD, or more precisely, a live system, is a
  complete system prepared for a CD, DVD, USB key or other medium.
  _*You*_ do not need to install anything on the hard drive. Instead
  you boot from the CD or other medium and _*are able to start working
  on the machine right away*_. All programs run directly from the
  medium. 
 


sir, you probably had a bad day and mistakenly downloaded the lxde (for its
smaller size)


as everyone suggested, use the gnome version instead which can be get from
http://live.debian.net/archive/images/6.0.3/i386/iso-hybrid/

it the 
debian-live-6.0.3-i386-gnome-desktop.isohttp://live.debian.net/archive/images/6.0.3/i386/iso-hybrid/debian-live-6.0.3-i386-gnome-desktop.iso
file and do make sure the MD5SUM is correct before burning it to a DVD
(it's a 1.1 GB file)

-- 
Regards,

Umarzuki Mochlis
http://debmal.my

where do i find documents for bacula-console-qt

[Umarzuki Mochlis]

i need to find documentation on adding client and running backup/restore to
client for bacula-console-qt on squeeze.

anyone can point me to the right direction? or i actually need to configure
it first from cli then it can be viewed from bat?

-- 
Regards,

Umarzuki Mochlis
http://debmal.my

Re: where do i find documents for bacula-console-qt

[Umarzuki Mochlis]

2012/1/17 Camaleón noela...@gmail.com


 Has Internet closed? :-P

 http://www.bacula.org/5.2.x-manuals/en/console/console/Bacula_Console.html

 You have to have that same doc (and more) in your hard disk under /usr/
 share/doc/bacula-common/*

 Greetings,

 --
 Camaleón


 --
 To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
 with a subject of unsubscribe. Trouble? Contact
 listmas...@lists.debian.org
 Archive: http://lists.debian.org/jf1m6e$odu$1...@dough.gmane.org


thanks. although i'm looking for a manual that is specific for BAT but i
seems that i need to do it manually via configs after all

-- 
Regards,

Umarzuki Mochlis
http://debmal.my

ammt: command not found

[Umarzuki Mochlis]

hi,

i'm trying to learn configuring amanda backup by referring to
http://www.howtoforge.com/disk-backup-with-amanda-on-debian-lenny
but stuck at Test the virtual tapes: because program ammt is not
available.

searching with apt-file also returns no output

any idea? or this program had been renamed/deprecated in squeeze?
-- 
Regards,

Umarzuki Mochlis
http://debmal.my

Re: icedove set the iceweasel as the default webroswer

[Umarzuki Mochlis]

2011/12/27 lina lina.lastn...@gmail.com

 Hi,

 how can I set the default web browser for any link in icedove to be
 iceweasel without removing epiphany.

 Thanks,

maybe you could try:

system - preferences - preferred applications
-- 
Regards,

Umarzuki Mochlis
http://debmal.my

Re: when did debian came into existence?

[Umarzuki Mochlis]

2011/12/12 LinuxIsOne reall...@hmamail.com

 HI,

 when did Debian came into existence?



 1993

red more here -
http://www.debian.org/doc/manuals/debian-faq/ch-basic_defs.en.html#s-whatisdebian



-- 
Regards,

Umarzuki Mochlis
http://debmal.my

Re: please help me for buy laptop-i need your opinion

[Umarzuki Mochlis]

2011/12/8 hamed hosseini hoss...@gmail.com

 thank you,but tell me why you choice number 1?
 i need to know Debian support  Nvidia GeForce GT 550M 1GB and Atheros
 AR9285 Wireless Network Adapter or Broadcom 802.11n Wireless Network
 Adapter


http://wiki.debian.org/DebianEeePC/Model/1005HA

i just prefer ath over bcm. most bcm wireless built-in wireless device does
not support monitor mode. at least bcm4312, if you're into sniffin' ;)
-- 
Regards,

Umarzuki Mochlis
http://debmal.my

Re: please help me for buy laptop-i need your opinion

[Umarzuki Mochlis]

2011/12/7 hamed hosseini hoss...@gmail.com

 hi, please,i have 2 choice,i need your opinion,tell me your choice(1 or 2)?

 note:i want best laptop for Debian and Linux OS.



i'd go with number 1 without the windows OS.

-- 
Regards,

Umarzuki Mochlis
http://debmal.my

upnp client on wheezy

[Umarzuki Mochlis]

Hi,

Anyone got upnp share browsing working on wheezy? I can't find coherence
plugin for totem on wheezy and upnp discovery on vlc only shows media but
cannot browse its shared files.

-- 
Regards,

Umarzuki Mochlis
http://debmal.my

why does apt-mirror's service always running even after scheduled

[Umarzuki Mochlis]

Hi,

On Squeeze AMD64, apt-mirror seems to always run even after configured with
below config in crontab

# crontab -l

# m h  dom mon dow   command
* 0-7 * * * /root/sync-mirror
* 0-12 * * 6,0 /root/sync-mirror

# cat /root/sync-mirror
su - apt-mirror -c apt-mirror  mirror.log

# netstat -tuanp
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address   Foreign Address
State   PID/Program name
tcp0  0 0.0.0.0:111 0.0.0.0:*
LISTEN  782/portmap
tcp0  0 0.0.0.0:22  0.0.0.0:*
LISTEN  1666/sshd
tcp0  0 127.0.0.1:250.0.0.0:*
LISTEN  1545/exim4
tcp0  0 0.0.0.0:58464   0.0.0.0:*
LISTEN  794/rpc.statd
tcp0  0 10.0.0.125:4227491.189.92.170:80
ESTABLISHED 8370/wget
tcp0  0 10.0.0.125:22   10.0.0.129:50105
ESTABLISHED 25767/0
tcp6   0  0 :::80   :::*
LISTEN  25992/apache2
tcp6   0  0 :::22   :::*
LISTEN  1666/sshd
tcp6   0  0 ::1:25  :::*
LISTEN  1545/exim4
udp0  0 0.0.0.0:111 0.0.0.0:*
782/portmap
udp0  0 0.0.0.0:58800   0.0.0.0:*
794/rpc.statd
udp0  0 0.0.0.0:68  0.0.0.0:*
1719/dhclient
udp0  0 0.0.0.0:970 0.0.0.0:*
794/rpc.statd

the mirror server constantly use around 500 Mbps of bandwidth although this
is a local mirror hosted in my work place where only 3 debian and ubuntu
users including me.



-- 
Regards,

Umarzuki Mochlis
http://debmal.my

webex: You do not have the necessary audio capabilities (error: -1)

[Umarzuki Mochlis]

hi,

on my debian 6 amd64, when loading webex, i got error as below:
*You do not have* the *necessary audio capabilities* (error: -1)


and the webex session will not start -but that's another thing.

$ java -version
java version 1.6.0_18
OpenJDK Runtime Environment (IcedTea6 1.8.9) (6b18-1.8.9-0.1~squeeze1)
OpenJDK 64-Bit Server VM (build 14.0-b16, mixed mode)

anyone had encountered this before and found the solution?

-- 
Regards,

Umarzuki Mochlis
http://debmal.my

Re: Hi, how to lower the temperature of dell laptop?

[Umarzuki Mochlis]

2011/10/12 shiyao ma i...@introo.me

 Thanks for hintting me the Kernel Governor, I am a newbier to linux, so
 can you tell me some wiki or articles on cooling down the temperature?
 Thus I can make it step by step.


this might help

http://wiki.debian.org/HowTo/CpuFrequencyScaling

-- 
Regards,

Umarzuki Mochlis
http://debmal.my

Re: a quick Q: iceweasle add on

[Umarzuki Mochlis]

2011/9/24 lina lina.lastn...@gmail.com





 is my laptop lack something? some module?
 I tried the 'URL' and URL


 Thanks,

 i had the same problem too, so i use keepvid.com for the mean time

-- 
Regards,

Umarzuki Mochlis
http://debmal.my

Re: RAR/ apt-get Question

[Umarzuki Mochlis]

2011/9/15 Greg Madden gomadtr...@gci.net



 On Wednesday 14 September 2011 07:03:54 pm Umarzuki Mochlis wrote:
  2011/9/15 Greg Madden gomadtr...@gci.net
 
It is in non-free.
  
  
   aptitude install unrar

 That said, a default install of Squeeze only has 'main' in the
 sources.list. You
 have to add 'non-free', and 'contrib' if you want that one also.

 indeed. do not forget to run aptitude update after that. Then you can
install unrar

best wishes



-- 
Regards,

Umarzuki Mochlis
http://debmal.my

Re: RAR/ apt-get Question

[Umarzuki Mochlis]

2011/9/15 Greg Madden gomadtr...@gci.net




  It is in non-free.


 aptitude install unrar

-- 
Regards,

Umarzuki Mochlis
http://debmal.my