Re: No HDMI Sound in Gnome (Debian Stretch)
On 07/14/2016 02:23 PM, nice sw123 wrote: Hi, the Gnome-bases sound configuration no longer shows HDMI. (I ONLY see Build-in Audio Analog Stereo). But aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav does play sound through HDMI. What can I do to get HDMI listed in the Gnome Sound Config?? Open alsamixer and unmute HDMI -- My father, Victor Moore (Vic) used to say: "There are two Great Sins in the world... ..the Sin of Ignorance, and the Sin of Stupidity. Only the former may be overcome." R.I.P. Dad. http://linuxcounter.net/user/44256.html
No HDMI Sound in Gnome (Debian Stretch)
Hi, the Gnome-bases sound configuration no longer shows HDMI. (I ONLY see Build-in Audio Analog Stereo). But aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav does play sound through HDMI. What can I do to get HDMI listed in the Gnome Sound Config?? Thanks
Re: How to disable (or change) the logout sound in gnome/GDM?
On Mon, Mar 28, 2011 at 7:32 PM, Vincent Lefevre vinc...@vinc17.net wrote: On 2011-03-28 09:58:57 +0800, Yuwen Dai wrote: The logout sound is a very ugly beep. I can change the login sound in gdm.conf but can not find where the logout sound setting is. I also put pcspkr module in the blacklist, no effect. Various solutions (the first one works on some machines, but not everywhere, and I don't know why): 1. xset -b in your .xsession or whatever is run (this will disable the beep also in other applications, which is fine, IMHO). Hi Vincent, xset -b works. Thanks. 2. With gdm, set SoundOnLogin=false in /etc/gdm/gdm.conf. I've already set this, this is no effect. In fact, the beep only occurs when I shutdown the computer in gnome. It doesn't beep when I login or logout. 3. With gdm3, the /etc/gdm3/greeter.gconf-defaults config file can be changed to have: /desktop/gnome/sound/event_sounds false I don't use gdm3. Best regards, Yuwen -- Vincent Lefèvre vinc...@vinc17.net - Web: http://www.vinc17.net/ 100% accessible validated (X)HTML - Blog: http://www.vinc17.net/blog/ Work: CR INRIA - computer arithmetic / Arénaire project (LIP, ENS-Lyon) -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110328113235.gc1...@prunille.vinc17.org
Re: How to disable (or change) the logout sound in gnome/GDM?
On 2011-03-28 09:58:57 +0800, Yuwen Dai wrote: The logout sound is a very ugly beep. I can change the login sound in gdm.conf but can not find where the logout sound setting is. I also put pcspkr module in the blacklist, no effect. Various solutions (the first one works on some machines, but not everywhere, and I don't know why): 1. xset -b in your .xsession or whatever is run (this will disable the beep also in other applications, which is fine, IMHO). 2. With gdm, set SoundOnLogin=false in /etc/gdm/gdm.conf. 3. With gdm3, the /etc/gdm3/greeter.gconf-defaults config file can be changed to have: /desktop/gnome/sound/event_sounds false -- Vincent Lefèvre vinc...@vinc17.net - Web: http://www.vinc17.net/ 100% accessible validated (X)HTML - Blog: http://www.vinc17.net/blog/ Work: CR INRIA - computer arithmetic / Arénaire project (LIP, ENS-Lyon) -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110328113235.gc1...@prunille.vinc17.org
Re: How to disable (or change) the logout sound in gnome/GDM?
On 2011-03-28 13:32:35 +0200, Vincent Lefevre wrote: On 2011-03-28 09:58:57 +0800, Yuwen Dai wrote: The logout sound is a very ugly beep. I can change the login sound in gdm.conf but can not find where the logout sound setting is. I also put pcspkr module in the blacklist, no effect. Various solutions (the first one works on some machines, but not everywhere, and I don't know why): 1. xset -b in your .xsession or whatever is run (this will disable the beep also in other applications, which is fine, IMHO). 2. With gdm, set SoundOnLogin=false in /etc/gdm/gdm.conf. 3. With gdm3, the /etc/gdm3/greeter.gconf-defaults config file can be changed to have: /desktop/gnome/sound/event_sounds false Actually, after some tests, (1) is unrelated. On one machine, gdm3 no longer beeps even though I have /desktop/gnome/sound/event_sounds true in /etc/gdm3/greeter.gconf-defaults and I do not use xset -b (e.g. the beep works in Emacs). gconftool -g /desktop/gnome/sound/event_sounds outputs false, so that there may be something else. I'm happy with that, though. -- Vincent Lefèvre vinc...@vinc17.net - Web: http://www.vinc17.net/ 100% accessible validated (X)HTML - Blog: http://www.vinc17.net/blog/ Work: CR INRIA - computer arithmetic / Arénaire project (LIP, ENS-Lyon) -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110328114626.gd1...@prunille.vinc17.org
How to disable (or change) the logout sound in gnome/GDM?
Dear all, The logout sound is a very ugly beep. I can change the login sound in gdm.conf but can not find where the logout sound setting is. I also put pcspkr module in the blacklist, no effect. Best regards, Yuwen
Re: only Root can play sound in GNOME
You might need to change ALL the audio group files in /dev to 777 to get it to work outside of root. I just had to do that on a thinkpad A30 to get sound to work for users (and installed the correct drivers). Hi all, I just installed Debian sarge with X and the following problem occurs: When I log in in Gnome as a regular user my speakers are making noise like a factorymachine (alternating silence and 'tshhh') and I can't play audiofiles. While logged in as Root, or logged in in KDE as regular user there's no problem. I already checked that I am in the 'audio' group, and changed permissions of /dev/mixer* and /dev/dsp* to 777 (just to make sure... i know it's nasty) Can someone tell me what I'm doing wrong? Thanks, Joris -- RotBotL Craig .. Systems: Servers; Software; Solution. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: only Root can play sound in GNOME
On Thu, 2005-11-10 at 02:00 +0100, Joris Hooijberg wrote: Hi all, I just installed Debian sarge with X and the following problem occurs: When I log in in Gnome as a regular user my speakers are making noise like a factorymachine (alternating silence and 'tshhh') and I can't play audiofiles. While logged in as Root, or logged in in KDE as regular user there's no problem. I already checked that I am in the 'audio' group, and changed permissions of /dev/mixer* and /dev/dsp* to 777 (just to make sure... i know it's nasty) what is the output of lsmod? what is the output of lspci -vv? are you using udev? what is the output of dmesg after boot? maybe turn on bootlogging. look at /etc/default/bootlogd. then after boot look at /var/log/bootlog* what about not logging into X and using some console audio apps like ogg123 or play as a normal user. -matt zagrabelny -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: only Root can play sound in GNOME
Matt Zagrabelny [EMAIL PROTECTED]: On Thu, 2005-11-10 at 02:00 +0100, Joris Hooijberg wrote: I just installed Debian sarge with X and the following problem occurs: Me too. When I log in in Gnome as a regular user my speakers are making noise like a factorymachine (alternating silence and 'tshhh') and I can't play audiofiles. Mine sounds like fast repeating high freq. static. Lasts a few seconds so far (existing /usr/share/... audiofiles I've found). While logged in as Root, or logged in in KDE as regular user there's I haven't tried root. I don't intend for it to work for root. what is the output of lsmod? (0) infidel /home/keeling_ lsmod | egrep 'sound|mae|mixer|oss|snd' snd_maestro3 25512 0 snd_ac97_codec 69988 1 snd_maestro3 maestro3 37128 1 ac97_codec 18956 1 maestro3 snd_pcm_oss55080 0 snd_pcm98728 2 snd_maestro3,snd_pcm_oss snd_page_alloc 11752 1 snd_pcm snd_timer 25732 1 snd_pcm snd_mixer_oss 20096 1 snd_pcm_oss snd57156 6 snd_maestro3,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss soundcore 10336 3 maestro3,snd what is the output of lspci -vv? :00:08.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI Audio Acce lerator (rev 10) Subsystem: Dell: Unknown device 00b0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR - FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 32 (500ns min, 6000ns max) Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at d800 [size=256] Region 1: Memory at f3ffe000 (32-bit, non-prefetchable) [size=8K] Capabilities: available only to root are you using udev? Yes. what is the output of dmesg after boot? maestro3: version 1.23 built at 17:58:25 May 19 2005 ACPI: PCI interrupt :00:08.0[A] - GSI 5 (level, low) - IRQ 5 maestro3: Configuring ESS Maestro3(i) found at IO 0xD800 IRQ 5 maestro3: subvendor id: 0x00b01028 maybe turn on bootlogging. look at /etc/default/bootlogd. Thanks for that! Don't know how I missed it. ogg123 or play as a normal user. I've been using play/esdplay. The latter produces static, the former nothing. -- Any technology distinguishable from magic is insufficiently advanced. (*)http://www.spots.ab.ca/~keeling Linux Counter #80292 - -Spammers! http://www.spots.ab.ca/~keeling/autospam.html http://www.ietf.org/rfc/rfc1855.txt -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
only Root can play sound in GNOME
Hi all, I just installed Debian sarge with X and the following problem occurs: When I log in in Gnome as a regular user my speakers are making noise like a factorymachine (alternating silence and 'tshhh') and I can't play audiofiles. While logged in as Root, or logged in in KDE as regular user there's no problem. I already checked that I am in the 'audio' group, and changed permissions of /dev/mixer* and /dev/dsp* to 777 (just to make sure... i know it's nasty) Can someone tell me what I'm doing wrong? Thanks, Joris
[sid] kein Sound unter Gnome
Hallo Liste, dass es unter Debian sid und Gnome 2.6 keinen Sound gab/gibt(?) hab ich schonmal hier gelesen. Jetzt habe ich aber ein noch ziemlich seltsames Problem. Meine Soundkarte (die auf dem Intel 82801 Laptop Chip) lief bisher, noch als ich Gnome 2.6 aus experimental installiert hatte, einwandfrei. Sie wurde direkt vom Kernel unterstützt, ohne OSS oder ALSA und ich brauchte sie nichtmal manuell irgendwo als Kernelmodul laden. Dann kam aber mit apt-get upgrade mal eine neue glibc und Gnome 2.6 aus sid - und seitdem funktioniert der Sound nicht mehr. Keine Ahnung ob es an der glibc liegt (was ich aber annehme) oder am Gnome. Jetzt habe ich festgestellt, dass der Sound über OSS zu funktionieren scheint, auch über libesd scheint es zu klappen. Das gnome-volume-control panel lässt sich wieder öffnen (war vorher nicht: Kein Mixergerät gefunden), seitdem ich gstreamer0.8-oss installiert habe und die Lautstärke lässt sich auch wieder regeln. Funktionieren heisst in dem Fall: Die Soundkarte ist erkannt worden, xmms bzw. Totem spielen mp3's visuell sichtbar ab (die visualisierungs-modi zeigen was an) ABER: es kommt kein Ton?! (Lautsprecher funktionieren ;-)) Wenn nur meine Soundkarte falsch erkannt worden wäre oder ich nicht in der Gruppe snd, audio, usw. eingetragen wäre, dann könnte man da starten und das Problem versuchen zu beheben, aber so weiß ich nicht weiter. Ist das ein Bug den man aussitzen muss oder ist das Problem behebbar? Danke für jeden Tipp - Eckhard
Re: [sid] kein Sound unter Gnome
Guten Morgen, Die Soundkarte ist erkannt worden, xmms bzw. Totem spielen mp3's visuell sichtbar ab (die visualisierungs-modi zeigen was an) ABER: es kommt kein Ton?! (Lautsprecher funktionieren ;-)) falls du das noch nicht hast: Installier mal einen Mixer (aumix z.B.) und dreh damit die Lautstärke (insbesondere des PCM (o.s.ä.) Kanal) hoch. Ich vermute das es daran liegt, oder aber versuch mal ein anderes Ausgabe-Plugin in xmms einzustellen, wobei ich letzteres eher als unwahrscheinlich einstufe. Gruß Patrick -- IN MEDIAS RES -=Operations=- tel. +49 (0) 2166 - 99 99 - 685 fax. +49 (0) 2166 - 99 99 - 850 email: [EMAIL PROTECTED] web: www.in-medias-res.com -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: [sid] kein Sound unter Gnome
Guten Morgen, Am Mi, den 16.06.2004 schrieb Patrick Schoenfeld um 10:49: falls du das noch nicht hast: Installier mal einen Mixer (aumix z.B.) und dreh damit die Lautstärke (insbesondere des PCM (o.s.ä.) Kanal) hoch. Ich vermute das es daran liegt, oder aber versuch mal ein anderes Ausgabe-Plugin in xmms einzustellen, wobei ich letzteres eher als unwahrscheinlich einstufe. Also das mit dem Mixer hat nicht hingehauen, aumix ist quasi das selbe wie der GNOME mixer und regelt auch nicht anders als derselbe. Gerade hab ich aber in XMMS statt dem OSS mal wieder das esound plugin eingestellt - und jetzt hör ich was :). Die Frage ist jetzt nur, wie ich das default mäßig einstelle, auch für Totem - aber vielleicht funktioniert es ja schon. Eckhard ;)
No sound in Gnome (Sarge, SoundBlaster card, Gnome 2.4.1)
So far Google reveals only that SoundBlaster cards sometimes misbehave. I couldn't find anything specific about not getting any sound out of Gnome with a SoundBlaster Live 5.1 card. I have the correct modules loaded (2.6.3 kernel, snd-emu10k1, snd/sound/coundcore, ac97-codec), fixed permissions on /dev/mixer and /dev/dsp, and added myself to the audio group. Looking in /proc/driver/emu10k1/:00:0f.0 : $ cat info: Driver Version : 0.20a Card type : Emu10k1 Revision : 10 Model : 0x8064 IO : 0xa800-0xa81f IRQ: 18 Registered /dev Entries: /dev/dsp0 /dev/dsp1 /dev/mixer0 /dev/midi0 /dev/sequencer $ cat ac97: Vendor name : Unknown Vendor id: 454D 4328 AC97 Version : 2.0 or later Capabilities : DAC resolutions : -16-bit- -18-bit- ADC resolutions : -16-bit- -18-bit- 3D enhancement : No 3D Stereo Enhancement POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX MIC select : MIC1 ADC/DAC loopback : off Ext Capabilities : -PCM surround DAC- -slot/DAC mappings- Front DAC rate : 0 --- Looks like /dev/dsp and /dev/mixer aren't handled by the device driver under Registered /dev Entries so nothing's happening when applications use /dev/dsp and /dev/mixer. But if I cat /dev/urandom /dev/dsp I do get a hissing sound, leading me to believe that I am completely confused and out of my depth... I'm not sure how to instruct Gnome to use /dev/dsp0 or /dev/dsp1, or /dev/mixer0 or /dev/mixer1, or whatever it is that I must do. Any help appreciated, Thanks. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
[SOLVED] No sound in Gnome
Sorry list, problem solved. Symlinked /dev/dsp0 to /dev/dsp and /dev/mixer to /dev/mixer0. Didn't have speaker volume turned up :) D'oh! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
sound problem gnome (newbie)
moin moin liste hat der test alo funktioniert ;-) also ich habe ein unstable/testing sytem mit nem 2.6.3 grade aufgesetzt alles frisch. soundkarte mit ALSA zum laufen bekommen alles super nun zu meiner frage : die sound geschichten des gnome desktop's (also mixer, einfacher lautstärkenregler, und gnome sound's) greifen auf /dev/dsp bzw /dev/mixer zu a) welches device wird von alsa erzeugt bzw gnutzt ? b) wie bekomme ich gnome dazu das er alsa nutzt ? also film mp3 und sonstige anwedungen funzen prima nur die kleinigkeit der gnome sound's gruss und danke torben -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: sound problem gnome (newbie)
Hallo Torben, On Tue, 24 Feb 2004 12:22:30 +0100 [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: moin moin liste hat der test alo funktioniert ;-) also ich habe ein unstable/testing sytem mit nem 2.6.3 grade aufgesetzt alles frisch. soundkarte mit ALSA zum laufen bekommen alles super nun zu meiner frage : die sound geschichten des gnome desktop's (also mixer, einfacher lautstärkenregler, und gnome sound's) ^^ ich vermute, daß außer deiner Umschalttaste auch das Encoding noch nicht passt. greifen auf /dev/dsp bzw /dev/mixer zu a) welches device wird von alsa erzeugt bzw gnutzt ? b) wie bekomme ich gnome dazu das er alsa nutzt ? Installier mal esd (esound). Ich habe auf meinem System folgende Pakete (apt-show-versions -b | grep -i esd | cut -d / -f 1) installiert: mpg123-esd libesd-alsa0 libsdl1.2debian-esd Jörg -- Jörg Schütter http://www.lug-untermain.de/ [EMAIL PROTECTED] http://www.schuetter.org/joerg/ ICQ: 298982789 http://mypenguin.bei.t-online.de/ -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: sound problem gnome (newbie)
Hello Jörg, On Tue, 24 Feb 2004 12:33:35 +0100 Jörg Schütter [EMAIL PROTECTED] wrote: Hallo Torben, On Tue, 24 Feb 2004 12:22:30 +0100 [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: moin moin liste hat der test alo funktioniert ;-) also ich habe ein unstable/testing sytem mit nem 2.6.3 grade aufgesetzt alles frisch. soundkarte mit ALSA zum laufen bekommen alles super nun zu meiner frage : die sound geschichten des gnome desktop's (also mixer, einfacher lautstärkenregler, und gnome sound's) ^^ ich vermute, daß außer deiner Umschalttaste auch das Encoding noch nicht passt. greifen auf /dev/dsp bzw /dev/mixer zu a) welches device wird von alsa erzeugt bzw gnutzt ? b) wie bekomme ich gnome dazu das er alsa nutzt ? Installier mal esd (esound). Ich habe auf meinem System folgende Pakete (apt-show-versions -b | grep -i esd | cut -d / -f 1) installiert: apt-show-versions -b | grep -E (esd|esound) | cut -d / -f 1 | sort wäre sinnvoller gewesen. Hier das Resultat: esound esound-clients esound-common libesd-alsa0 libsdl1.2debian-esd mpg123-esd Jörg -- Jörg Schütter http://www.lug-untermain.de/ [EMAIL PROTECTED] http://www.schuetter.org/joerg/ ICQ: 298982789 http://mypenguin.bei.t-online.de/ -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: sound problem gnome (newbie)
danke erstmal fuer deine unterstuezung hab die sachen mal installiert, esd laeuft auch nuetzt dem gnome aber leider nix , also nur noch mal ne verstaedniss frage : esd erzeugt auch kein device oder ? so das ich eventuell durch einen einfachen softlink das esd device auf /dev/dsp umbiegen kann ? Am Di, den 24.02.2004 schrieb Jörg Schütter um 12:41: Hello Jörg, On Tue, 24 Feb 2004 12:33:35 +0100 Jörg Schütter [EMAIL PROTECTED] wrote: Hallo Torben, On Tue, 24 Feb 2004 12:22:30 +0100 [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: moin moin liste hat der test alo funktioniert ;-) also ich habe ein unstable/testing sytem mit nem 2.6.3 grade aufgesetzt alles frisch. soundkarte mit ALSA zum laufen bekommen alles super nun zu meiner frage : die sound geschichten des gnome desktop's (also mixer, einfacher lautstÀrkenregler, und gnome sound's) ^^ ich vermute, daß außer deiner Umschalttaste auch das Encoding noch nicht passt. greifen auf /dev/dsp bzw /dev/mixer zu a) welches device wird von alsa erzeugt bzw gnutzt ? b) wie bekomme ich gnome dazu das er alsa nutzt ? Installier mal esd (esound). Ich habe auf meinem System folgende Pakete (apt-show-versions -b | grep -i esd | cut -d / -f 1) installiert: apt-show-versions -b | grep -E (esd|esound) | cut -d / -f 1 | sort wäre sinnvoller gewesen. Hier das Resultat: esound esound-clients esound-common libesd-alsa0 libsdl1.2debian-esd mpg123-esd Jörg -- Jörg Schütter http://www.lug-untermain.de/ [EMAIL PROTECTED] http://www.schuetter.org/joerg/ ICQ: 298982789 http://mypenguin.bei.t-online.de/ -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: sound problem gnome (newbie)
Am Die, den 24.02.2004 schrieb [EMAIL PROTECTED] um 13:23: danke erstmal fuer deine unterstuezung hab die sachen mal installiert, esd laeuft auch nuetzt dem gnome aber leider nix , also nur noch mal ne verstaedniss frage : esd erzeugt auch kein device oder ? so das ich eventuell durch einen einfachen softlink das esd device auf /dev/dsp umbiegen kann ? WaS? esd ist der Sound-Daemon, den GNOME unterstützt. esd(bzw. esound) installieren, GNOME starten, Lautstärkeregler ausführen, aufdrehen und Soundabspielen (wenn deine Programme auch einen dementsprechenden Output besitzen). MfG Pierre -- Erst wenn der Mensch seine Fehler einsieht, ist er kein Mensch mehr. -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: sound problem gnome (newbie)
[EMAIL PROTECTED] schrieb: moin moin liste hat der test alo funktioniert ;-) also ich habe ein unstable/testing sytem mit nem 2.6.3 grade aufgesetzt alles frisch. soundkarte mit ALSA zum laufen bekommen alles super nun zu meiner frage : die sound geschichten des gnome desktop's (also mixer, einfacher lautstärkenregler, und gnome sound's) greifen auf /dev/dsp bzw /dev/mixer zu a) welches device wird von alsa erzeugt bzw gnutzt ? b) wie bekomme ich gnome dazu das er alsa nutzt ? also film mp3 und sonstige anwedungen funzen prima nur die kleinigkeit der gnome sound's gruss und danke torben kann dein alsa /dev/dsp und /dev/mixer ? ,,, das sind eigentlich oss devices ,,, aber alsa kann diese emulieren ,,, dieses muss man aber mit ein-kompilieren b.z.w. das modul aktivieren -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: sound problem gnome (newbie)
Am 2004-02-24 12:22:30, schrieb [EMAIL PROTECTED]: ^ Hier sollte Dein Name stehen moin moin liste N'abend hat der test alo funktioniert ;-) Nee, Du hast keinen: Content-Type: text/plain; charset= ^^^ iso-8859-15 gesetzt. also ich habe ein unstable/testing sytem mit nem 2.6.3 grade aufgesetzt alles frisch. Und noch nicht anständig konfiguriert... die sound geschichten des gnome desktop's (also mixer, einfacher lautst??rkenregler, und gnome sound's) ^^ Charset setzen gruss und danke torben Greetings Michelle -- Registered Linux-User #280138 with the Linux Counter, http://counter.li.org/ -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Sound (SBLive) | Gnome Problems
On Mon, Dec 02, 2002 at 01:48:17PM +, Pigeon wrote: Soundblasters have the aforementioned FS-unfriendly problem and also apparently resample everything to 48kHz, so CMI8738 it was. There are still driver problems, both in Windoze and Linux, but at least in Linux it's possible to hack round them. In Windoze, it screws up the S/PDIF recording when you update your modem drivers... Ah, interesting. I've been idly looking for a soundcard with 'real' s/pdif input (the sblive resampling stupidity ruled them out), I'll have a look at the CMI8738 cards. -rob msg16917/pgp0.pgp Description: PGP signature
Re: Sound (SBLive) | Gnome Problems
On Mon, Dec 02, 2002 at 04:37:57PM +, Rob Weir wrote: Oh, ok. I was under the impression that the digital connector was pretty standard these days. I have a miscellaneous TEAC CD-ROM drive and I'm using the digital connector with my SBLive and it works fine. IIRC, it worked with just the analogue connector too. S/PDIF output is much more common than input for some reason. I was looking around for something to accept S/PDIF input from my 24-bit outboard ADC, and the choice seemed to be: 1) Mid-range and upwards Soundblasters 2) CMI8738-DX or -MX based cards (NOT -SX or -LX) 3) Really expensive cards which often use the same chip as a cheaper one but have more connectors, cost two or three times as much and still want you to buy an extra little daughter board to connect the S/PDIF I/O. Soundblasters have the aforementioned FS-unfriendly problem and also apparently resample everything to 48kHz, so CMI8738 it was. There are still driver problems, both in Windoze and Linux, but at least in Linux it's possible to hack round them. In Windoze, it screws up the S/PDIF recording when you update your modem drivers... Pigeon -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Sound (SBLive) | Gnome Problems
On Fri, Nov 29, 2002 at 01:33:51PM -0800, Andres Guedez wrote: Greetings, I've been having trouble getting sound to work in my Debian unstable setup. Environment sounds seem to work well in KDE (I get a sound when I open and close windows and that kind of stuff) and I was able to get sound when playing MP3s through XMMS. However, I cannot get any sound when playing CDs. Have you plugged your cd-rom drive into your sound card? Most CD playing programs completely bypass your computer and just tell your drive to blit bits down a digital interface onto your soundcard. Also, don't forget to pump up the CD channel using aumix or whatever. soundcore and emu10k1 are loaded as modules in kernel 2.4.19. Good. My other problem is the gnome2 desktop. I upgraded from gnome to gnome2 and I seem to be having conflicts. Conflicts? Do you mean that some bits are GNOME 1.4 based and some bits are GNOME 2 based? This is to be expected at the moment, because a) not every package has been updated to the gnome 2 versions, and b) not every piece of gnome 1.4 software even has a gnome2 version yet (and might not ever, of course). How can I completly remove all the gnome related stuff so that I can install gnome2 from scratch? Erk, this is going to be painful. If you decide to do this, then use aptitude or apt or whatever (not dpkg) to remove libgnome{1,2} or something similar; every gnome{1,2} app will depend on these and get removed along with it. -rob msg16358/pgp0.pgp Description: PGP signature
Re: Sound (SBLive) | Gnome Problems
On Sun, Dec 01, 2002 at 04:49:52PM +1100, Rob Weir wrote: On Fri, Nov 29, 2002 at 01:33:51PM -0800, Andres Guedez wrote: Greetings, I've been having trouble getting sound to work in my Debian unstable setup. Environment sounds seem to work well in KDE (I get a sound when I open and close windows and that kind of stuff) and I was able to get sound when playing MP3s through XMMS. However, I cannot get any sound when playing CDs. Have you plugged your cd-rom drive into your sound card? Most CD playing programs completely bypass your computer and just tell your drive to blit bits down a digital interface onto your soundcard. ... if you're lucky enough to have a sound card with an S/PDIF connector for the CD-ROM (which the SB Live does) - 2-pin plug. Otherwise the CD-ROM does the D-to-A and passes analogue signals to the sound card - 3 or 4-pin plug. This may mean you have to set something in the mixer. What Linux calls it for your SB-Live I don't know. The Windoze drivers for my CMI8738 call it Monitor S/PDIF IN (pass S/PDIF IN to analogue line out). The Linux drivers for my card either don't use S/PDIF input at all or have this option switched on permanently, compiled in. So if you're really unlucky you may have to hack the kernel modules. And I think this means you may have to sign up as a Creative developer to get info on how to do it. I asked Creative a while back for a data sheet on the SB-Live and they said that due to copyright issues they couldn't send me one, which is one reason why I don't have a Soundblaster. If you don't mind the load you might try playing CDs through the computer with something like what I use (not very often, cos I usually play them through the hi-fi): cdda2wav -q -e -D/dev/cdrom -N -B 2/dev/null (that's for CD-ROM on ide-cd; if yours is ide-scsi use cdrecord -scanbus to get the n,n,n parameters for -D ) Pigeon -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Sound (SBLive) | Gnome Problems
On Sun, Dec 01, 2002 at 04:12:34PM +, Pigeon wrote: On Sun, Dec 01, 2002 at 04:49:52PM +1100, Rob Weir wrote: On Fri, Nov 29, 2002 at 01:33:51PM -0800, Andres Guedez wrote: Greetings, I've been having trouble getting sound to work in my Debian unstable setup. Environment sounds seem to work well in KDE (I get a sound when I open and close windows and that kind of stuff) and I was able to get sound when playing MP3s through XMMS. However, I cannot get any sound when playing CDs. Have you plugged your cd-rom drive into your sound card? Most CD playing programs completely bypass your computer and just tell your drive to blit bits down a digital interface onto your soundcard. ... if you're lucky enough to have a sound card with an S/PDIF connector for the CD-ROM (which the SB Live does) - 2-pin plug. Otherwise the CD-ROM does the D-to-A and passes analogue signals to the sound card - 3 or 4-pin plug. Oh, ok. I was under the impression that the digital connector was pretty standard these days. I have a miscellaneous TEAC CD-ROM drive and I'm using the digital connector with my SBLive and it works fine. IIRC, it worked with just the analogue connector too. This may mean you have to set something in the mixer. What Linux calls it for your SB-Live I don't know. The Windoze drivers for my CMI8738 call it Monitor S/PDIF IN (pass S/PDIF IN to analogue line out). The Linux drivers for my card either don't use S/PDIF input at all or have this option switched on permanently, compiled in. I'm using ALSA, and with aumix and the OSS emulation it's just the 'CD' (and the main master volume, of course) channel that has to be turned up. alsamixer also lists a CD channel, so crank that up see if it helps. So if you're really unlucky you may have to hack the kernel modules. I really doubt you'll have to do this, unless I'm missing something important. And I think this means you may have to sign up as a Creative developer to get info on how to do it. I asked Creative a while back for a data sheet on the SB-Live and they said that due to copyright issues they couldn't send me one, which is one reason why I don't have a Soundblaster. For a while there, Creative was on the right track with their emu10k1 drivers. They hired a guy to do it, and GPL'd the code, but kept the actual documentation under an NDA but actually let people sign up for it. It seemed like they were actually going to Free the specs, but then opensource.creative.com shut down, the dude was fired and development moved to sourceforge. So, yeah, not all that Free Software friendly, but they are (or were, at least) trying harder than NVidia, f'r instance. If you don't mind the load you might try playing CDs through the computer with something like what I use (not very often, cos I usually play them through the hi-fi): cdda2wav -q -e -D/dev/cdrom -N -B 2/dev/null (that's for CD-ROM on ide-cd; if yours is ide-scsi use cdrecord -scanbus to get the n,n,n parameters for -D ) Good idea, but I really think that you can get CDDA working. -rob msg16523/pgp0.pgp Description: PGP signature
Sound (SBLive) | Gnome Problems
Greetings, I've been having trouble getting sound to work in my Debian unstable setup. Environment sounds seem to work well in KDE (I get a sound when I open and close windows and that kind of stuff) and I was able to get sound when playing MP3s through XMMS. However, I cannot get any sound when playing CDs. soundcore and emu10k1 are loaded as modules in kernel 2.4.19. My other problem is the gnome2 desktop. I upgraded from gnome to gnome2 and I seem to be having conflicts. How can I completly remove all the gnome related stuff so that I can install gnome2 from scratch? __ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Kein Sound in gnome
On Tue, Jan 29, 2002 at 12:51:48AM +0100, David Elze wrote: Ein esdplay irgendwas.wav funktioniert erstaunlicherweise. Im Control Center ist unter Audio auch alles (Enable sound server startup + Sounds for event) aktiviert. bei mir auch ;-) OK, demnach läuft also der esd bei dir. Du musst unterscheiden zw. der nativen Soundunterstützung durch den Kernel (wahrscheinlich bei dir OSS - das OpenSoundSystem - oder ein direkter Treiber für deine Soundkarte) und einem sog. Soundserver wie der esd einer ist. jo, und das läßt sich im applet dann auch gut prüfen oder man gibt im terminal esd ein. Netzwerkfähigkeiten eines esd wenn ich nicht irre) jo, auch das ist möglich, wenn ich es auch noch nicht getestet habe. Hm, der esd hat teilweise eine eigene Volume-Steuerung, vielleicht ist die zu leise eingestellt? Ansonsten sind die Sound-Files für diese events in einem extra Gnome-Paket enthalten, ist das evtl. nicht installiert? Ansonsten fällt mir nichts ein, sorry... CU David tja david, das ist bei mir installiert und funktionierte bis heute weder als user noch als root. oh wunder, heute gibt esd zumindest beim user töne von sich. root soll wohl nicht. diesmal habe ich mich auch zuerst mal als user eingelogt. da hörte man ja was ;-))) aber fragt mich bitte nicht wieso, gestern nach dem update ging es nicht, heute ja. aber samba und die anderen paar pakete, die aktualisiert wurden werden ja wohl nichts mit dem esd zu tun haben oder? na vorerst bin ich schon mal froh daß ich etwas höre. grüße reinhard -- Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Kein Sound in gnome
On Tue, Jan 29, 2002 at 11:11:28PM +0100, Karlheinz Nolte wrote: Hallo nochmal, gerade bei google noch gefunden, vielleicht suchst du entsprechend weiter denn anscheinend bist du nicht der Einzige mit solch einem Problem... http://mail.gnome.org/archives/gnome-list/2000-January/msg00785.html CU David -- Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Kein Sound in gnome
On Tue, Jan 29, 2002 at 12:51:48AM +0100, David Elze wrote: On Mon, Jan 28, 2002 at 10:11:09PM +0100, Karlheinz Nolte wrote: Installiere dir ruhig mal das von Lothar erwähnte esd-control Panel-Applet mit dem du bequem den esd ein- und ausschalten kannst und spiele ein wenig damit rum. Du wirst sehen, dass mit aktiviertem esd mehrere (esd-fähige! oder zumindest per esdplay kompatible) Soundprogramme gleichzeitig auf deinen Boxen ausgeben und bei inaktivem esd nur ein Programm auf /dev/dsp zugreifen kann. Ja, ich kann mit dem Applet den esd ein- und ausschalten. Das bringt aber alles nix. Ich kann auch dort im Sound-Monitor Manager die Samples abspielen, aber nicht im Control-Center. Für mich ist das alles ziemlich seltsam. Kann es vielleicht sein, dass gnome den esd gar nicht verwendet? Kann man das überprüfen? Karlheinz. -- Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Kein Sound in gnome
On Mon, Jan 28, 2002 at 10:11:09PM +0100, Karlheinz Nolte wrote: N'Abend, Ein esdplay irgendwas.wav funktioniert erstaunlicherweise. Im Control Center ist unter Audio auch alles (Enable sound server startup + Sounds for event) aktiviert. OK, demnach läuft also der esd bei dir. Du musst unterscheiden zw. der nativen Soundunterstützung durch den Kernel (wahrscheinlich bei dir OSS - das OpenSoundSystem - oder ein direkter Treiber für deine Soundkarte) und einem sog. Soundserver wie der esd einer ist. Der Sinn des esd (oder auch aRts iirc unter KDE!?) besteht darin, mehrere Audio-Streams parallel zuzulassen was mit nativen (OSS-)Kerneltreibern meist nicht funktioniert ohne besondere Maßnahmen wie mehrere dsp-devs ect. (ganz zu schweigen von den Netzwerkfähigkeiten eines esd wenn ich nicht irre) Installiere dir ruhig mal das von Lothar erwähnte esd-control Panel-Applet mit dem du bequem den esd ein- und ausschalten kannst und spiele ein wenig damit rum. Du wirst sehen, dass mit aktiviertem esd mehrere (esd-fähige! oder zumindest per esdplay kompatible) Soundprogramme gleichzeitig auf deinen Boxen ausgeben und bei inaktivem esd nur ein Programm auf /dev/dsp zugreifen kann. Und bedenke auch immer, dass solche Soundserver erstens die Reaktionszeiten verlängern und zweitens auch Probleme auftreten können, bei mir z.B. im Zusammenhang mit avifile-player und DivX-files wo bei aktiviertem esd ein unerträgliches Rauschen/Fiepen kommt. Trotzdem höre ich nichts, wenn ich z.B. unter Sound Events den Play Button drücke. Hm, der esd hat teilweise eine eigene Volume-Steuerung, vielleicht ist die zu leise eingestellt? Ansonsten sind die Sound-Files für diese events in einem extra Gnome-Paket enthalten, ist das evtl. nicht installiert? Ansonsten fällt mir nichts ein, sorry... CU David -- Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Kein Sound in gnome
On Sun, Jan 27, 2002 at 01:08:20PM +0100, Karlheinz Nolte wrote: Hi, solbald ich gnome starte, ist keinerlei Sound-Ausgabe mehr möglich: Weder die Systemklänge, noch ein bplay auf eine Sound Datei funktionieren. Nur ein Schuss in's Blaue ... könnte es was mit esd zu tun haben, dem Enlightened Sound Deamon? Versuch doch mal in einem xterm während gnome läuft ein ps aux grep esd oder schau' im Control-Center nach, ob unter Multimedia - Audio - General der Soundserver aktiviert ist. Kannst auch mal ein esdplay bplay versuchen und schauen, ob's dann funzt - falls ja, läuft der esd. CU David -- Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
sound in gnome
Hi, on my sid machine (totally recent, except for the new mozilla packages from today), I never managed to get the gnome sounds working. esd is up and running, mpg321 -o esd, and a lot of other apps all play sound without a problem (I am using the std. kernel oss drivers). But gnome never plays a sound. Even if I go into the control-center, click on the sounds tab and ask it to play one of the event sounds manually, i get nothing to hear. Anybody knows what could be wrong? tia, Andreas PS: Btw, what is the best way to filter debian mailing list mails? There seem to be mails with various header fields indicating the list (X-Mailing-List, ...)
Sound Card Gnome
Hello all, I am working with Potato/gnome 1.4, and I am trying to get the sound driver working, with the application sounds of gnome. On the boot, I get: es1371: version v0.22 time 19:13:40 Nov 18 2000 es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02 es1371: found es1371 rev 2 at io 0xe800 irq 11 es1371: features: joystick 0x0 es1371: codec vendor v (0x838476) revision 9 (0x09) es1371: codec features 18bit DAC 18bit ADC es1371: stereo enhancement: SigmaTel SS3D and later on: Starting sound driver Snd-card-ens1371: failed which I can not understand. When I send somthing to the /dev/dsp it works, but on the applications sound I do not get nothing. Why? Any ideas? Thanks Joao Pissarro
Re: Sound Card Gnome
On Thu, Aug 30, 2001 at 01:11:17AM +0100, Joao Pissarro scribbled... Thnaks for replying. Here are the installed modules, and esound is intalled. jpissarro:/home/ct1dbh# lsmod Module Size Used by bttv 37116 1 tuner 2088 1 i2c 3352 2 [bttv tuner] videodev2512 2 (autoclean) [bttv] vmnet 16512 3 vmppuser5920 0 (unused) vmmon 18176 0 (unused) parport_probe 3348 0 (autoclean) parport_pc 7268 1 (autoclean) lp 4756 0 (autoclean) (unused) parport 6836 1 (autoclean) [vmppuser parport_probe parport_pc lp] yam28760 0 (unused) ax25 32668 0 [yam] usbcore41804 0 (unused) 3c59x 18480 1 sound 56364 0 (unused) soundlow 368 0 [sound] serial 19640 0 es1371 26544 1 soundcore 2440 7 [sound es1371] vfat9408 0 (unused) smbfs 24880 0 (unused) nls_cp860 3624 0 (unused) nfs43820 0 (unused) lockd 41720 0 [nfs] sunrpc 55452 0 [nfs lockd] unix 11336 113 (autoclean) Here are the error when the esound is run. Kernel is the 2.2.18pre21 (the one that comes with the distribution). jpissarro:/home/ct1dbh# esd audio_alsa: no cards found!Audio device open for 44.1Khz, stereo, 16bit failed Trying 44.1Khz, 8bit stereo. audio_alsa: no cards found!Audio device open for 44.1Khz, stereo, 8bit failed Trying 22.05Khz, 8bit stereo. audio_alsa: no cards found!Audio device open for 22.05Khz, stereo, 8bit failed Trying 44.1Khz, 16bit mono. audio_alsa: no cards found!Audio device open for 44.1Khz, mono, 8bit failed Trying 22.05Khz, 8bit mono. audio_alsa: no cards found!Audio device open for 22.05Khz, mono, 8bit failed Trying 11.025Khz, 8bit stereo. audio_alsa: no cards found!Audio device open for 11.025Khz, stereo, 8bit failed Trying 11.025Khz, 8bit mono. audio_alsa: no cards found!Audio device open for 11.025Khz, mono, 8bit failed Trying 8.192Khz, 8bit mono. audio_alsa: no cards found!Audio device open for 8.192Khz, mono, 8bit failed Trying 8Khz, 8bit mono. audio_alsa: no cards found!Sound device inadequate for Esound. Fatal. I'd guess something's wrong in the alsa library. I'd suggest replying to the list, not to individuals, so everyone can see your problem. There are people who know a lot more about it than I do. When you respond list the versions of all your sound stuff. dpkg -l|grep esound; dpkg -l|grep alsa Incidentally...can you play sound or load esound as root? If so it's a device permission issue.
Re: Sound Card Gnome
Ok Jason, the dpkg -l | grep esound is: [EMAIL PROTECTED]:~$ dpkg -l | grep esound ii esound-alsa0.2.17-7 Enlightened Sound Daemon (ALSA) - Support bi ii esound-common 0.2.17-7 Enlightened Sound Daemon - Common files and [EMAIL PROTECTED]:~$ dpkg -l | grep alsa ii alsa-base 0.4.1i-5 ALSA driver common files ii alsaconf 0.4.2-3ALSA configurator ii alsautils 0.4.1-5Advanced Linux Sound Architecture (utils) ii esound-alsa0.2.17-7 Enlightened Sound Daemon (ALSA) - Support bi ii libesd-alsa0 0.2.17-7 Enlightened Sound Daemon (ALSA) - Shared lib When starting the esd as root I get the same problem no cards found on modules.conf is: # --- BEGIN: Generated by ALSACONF, do not edit. --- # --- ALSACONF verion 0.4.2 --- alias char-major-116 snd alias snd-card-0 snd-card-ens1371 alias char-major-14 soundcore alias sound-slot-0 snd-card-0 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm1-oss alias sound-service-0-12 snd-pcm1-oss options snd snd_major=116 snd_cards_limit=1 snd_device_mode=0660 snd_device_gid=29 snd_device_uid=0 options snd-card-ens1371 snd_index=1 snd_id=CARD_1 snd_dac1_frame_size=64 snd_dac2_frame_size=64 snd_adc_frame_size=64 # --- END: Generated by ALSACONF, do not edit. --- I can run (as root and as user) all other applications like xmms, mp123, xawtv and so on, just the gnome applications sound does not work. Thanks Joao Pissarro Jason Majors wrote: On Thu, Aug 30, 2001 at 01:11:17AM +0100, Joao Pissarro scribbled... Thnaks for replying. Here are the installed modules, and esound is intalled. jpissarro:/home/ct1dbh# lsmod Module Size Used by bttv 37116 1 tuner 2088 1 i2c 3352 2 [bttv tuner] videodev2512 2 (autoclean) [bttv] vmnet 16512 3 vmppuser5920 0 (unused) vmmon 18176 0 (unused) parport_probe 3348 0 (autoclean) parport_pc 7268 1 (autoclean) lp 4756 0 (autoclean) (unused) parport 6836 1 (autoclean) [vmppuser parport_probe parport_pc lp] yam28760 0 (unused) ax25 32668 0 [yam] usbcore41804 0 (unused) 3c59x 18480 1 sound 56364 0 (unused) soundlow 368 0 [sound] serial 19640 0 es1371 26544 1 soundcore 2440 7 [sound es1371] vfat9408 0 (unused) smbfs 24880 0 (unused) nls_cp860 3624 0 (unused) nfs43820 0 (unused) lockd 41720 0 [nfs] sunrpc 55452 0 [nfs lockd] unix 11336 113 (autoclean) Here are the error when the esound is run. Kernel is the 2.2.18pre21 (the one that comes with the distribution). jpissarro:/home/ct1dbh# esd audio_alsa: no cards found!Audio device open for 44.1Khz, stereo, 16bit failed Trying 44.1Khz, 8bit stereo. audio_alsa: no cards found!Audio device open for 44.1Khz, stereo, 8bit failed Trying 22.05Khz, 8bit stereo. audio_alsa: no cards found!Audio device open for 22.05Khz, stereo, 8bit failed Trying 44.1Khz, 16bit mono. audio_alsa: no cards found!Audio device open for 44.1Khz, mono, 8bit failed Trying 22.05Khz, 8bit mono. audio_alsa: no cards found!Audio device open for 22.05Khz, mono, 8bit failed Trying 11.025Khz, 8bit stereo. audio_alsa: no cards found!Audio device open for 11.025Khz, stereo, 8bit failed Trying 11.025Khz, 8bit mono. audio_alsa: no cards found!Audio device open for 11.025Khz, mono, 8bit failed Trying 8.192Khz, 8bit mono. audio_alsa: no cards found!Audio device open for 8.192Khz, mono, 8bit failed Trying 8Khz, 8bit mono. audio_alsa: no cards found!Sound device inadequate for Esound. Fatal. I'd guess something's wrong in the alsa library. I'd suggest replying to the list, not to individuals, so everyone can see your problem. There are people who know a lot more about it than I do. When you respond list the versions of all your sound stuff. dpkg -l|grep esound; dpkg -l|grep alsa Incidentally...can you play sound or load esound as root? If so it's a device permission issue.
Sound in gnome
Hello everyone, I just switch from SuSE to Debian and I really, really happy (rpms were difficult to find for SuSE and anyhow I prefer a non-commercial distro). There is just one thing that doesn't seem to work : the sound in gnome, no gnome event produce sound althought sawfish does prduce sound, esdplay file works too ... the esd server is working and I'm member of the audio group. Any clue ?? BTW this is gnome 1.4 -- - -°) Evrard Nicolas/\\ Liège_\// -
Re: No sound in Gnome
[repost] Deryk Lister wrote: Here's an odd one, it's had me tearing my hair out for hours and I still can't figure it out! I can't get some gnome apps (specifically, the Gnome Control Center or Gabber) to make sounds. The situation so far: esound and OSS are both working, I've tested them both via xmms. Sound also works in the KDE environment. The Sawfish window manager is making its noises, which means esound is definitely working. I tried playing sounds from Control Center with esd enabled, and tried it again after killing esd. Nada in either case. It doesn't give any errors, in fact it looks as if it's playing, but it's silent. I was using Xemian Gnome, but tried removing it, deleting /etc/gnome, /etc/esound and ~/.gnome* and installing Debian's own packages of Gnome. Still nothing. /dev/dsp and /dev/sound are both writable by all users. The system: Debian Testing (originally Potato, but upgraded via apt-get dist-upgrade) Kernel 2.4.2 Sound Blaster Live (tried both OSS and ALSA too, no difference) Any help greatly appreciated! I'm sure it's just something stupid I'm doing, but I've now been fiddling with it on and off for days and am almost out of hair. -- Life is too short to run proprietary software. -- Bdale Garbee
Re: sound in gnome-sawfish
The Gnome environment uses EsounD, the sound daemon originally written for the Enlightenment window manager. The actual name of the daemon is esd. esd will work great with a Sound Blaster Live! card. When you said enable sound server startup you were saying yes to esd, but esd did not work. I had this problem too. It was due to file permissions. I think you have the same problem. esd wants to talk to the device file /dev/dsp, which is owned by a group called audio. One way to fix the problem would be to add read/write permission for anyone on the file /dev/dsp, but that is not the best way to fix it. The best way is to add your user name to the audio group in the /etc/group file. (Use the command man group for details on the format of /etc/group.) Once you are a member of the audio group, audio should work for you. Good luck.
Re: sound in gnome-sawfish
Steven, thank you very much for your help. Currently I am already a member of the audio group: $ groups myself $ myself: myself dialout audio dip Remember that I can play music CD normally. The problem is with the system sounds. Any other idea? Thank again! Marcelo On Fri, Feb 23, 2001 at 01:25:49AM -0800, Steve R. Hastings wrote: The Gnome environment uses EsounD, the sound daemon originally written for the Enlightenment window manager. The actual name of the daemon is esd. esd will work great with a Sound Blaster Live! card. When you said enable sound server startup you were saying yes to esd, but esd did not work. I had this problem too. It was due to file permissions. I think you have the same problem. esd wants to talk to the device file /dev/dsp, which is owned by a group called audio. One way to fix the problem would be to add read/write permission for anyone on the file /dev/dsp, but that is not the best way to fix it. The best way is to add your user name to the audio group in the /etc/group file. (Use the command man group for details on the format of /etc/group.) Once you are a member of the audio group, audio should work for you. Good luck. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
sound in gnome-sawfish
Hi to all! I am running potato 2.2r2 with 2.2.17 kerner and ximian-gnome. The default window manager is sawfish. I use the SB module in order to play CDs in my system without problems. But when I enter the Gnome control center and select multimidia/sound/general and enable sound server at startup and sounds for events options, nothig happens. Any event generates a plack! sound. The same thing occurs when, besides the settings in the Gnome Multimidia, I select play sound effects for window events in the sawfish/sound folder. Any help will be very welcome! Regards, Marcelo
Re: Sound in Gnome
Arlen Carlson [EMAIL PROTECTED] writes: I've also experienced sound not working in KDE2 if I happen to go into Gnome first, logout, and then login in KDE2. This could be a problem with 'esd', the Enlightenment Sound Daemon. If you login into GNOME, logout, do you still have process 'esd' running? If yes, try killing it. moritz -- Moritz Schulte [EMAIL PROTECTED] http://hp9001.fh-bielefeld.de/~moritz/ Debian/GNU supporter - http://www.debian.org/ http://www.gnu.org GPG fingerprint = 3A14 3923 15BE FD57 FC06 B501 0841 2D7B 6F98 4199
Re: Sound in Gnome
In order to make more space on my hard drive I recently created a new partition and copied /home over to this using the following: tar cSpf - . | (cd /home2 ; tar xvSpf - ) Now, running off my new partition as home, I've come across an error that I attribute to this change (as far as I can tell because I have no other explanation at present): sound does not work in Gnome. Yet under KDE2 sound works. I don't even seem to be able to get access to the cdrom for playing music, yet my permissions for that are in tact. I've also experienced sound not working in KDE2 if I happen to go into Gnome first, logout, and then login in KDE2. Any ideas and solutions would be much appreciated. --- Arlen Carlson [EMAIL PROTECTED] Both environments have sound daemons running so more than one sound can be played at the same time. KDE2 uses artsd for sound and GHOME used esd. After you leave KDE2 or GNOME, do a ps -ef and look for one of these sound daemons. If it's still active, do a kill -9 pid on it. I believe these daemons should stop once you leave the environment, but, I could be wrong. You can't have two of these running at the same time! Another method would be to run the sound app from an xterm while in KDE2 or GNOME. This way you'd get the stderr messages indicating the audio device is already in use or something like that. At that point, kill any sound daemons running and start the respective sound daemon for the enviroment you're in. Then, try running your sound app again. Scott
Sound in Gnome
In order to make more space on my hard drive I recently created a new partition and copied /home over to this using the following: tar cSpf - . | (cd /home2 ; tar xvSpf - ) Now, running off my new partition as home, I've come across an error that I attribute to this change (as far as I can tell because I have no other explanation at present): sound does not work in Gnome. Yet under KDE2 sound works. I don't even seem to be able to get access to the cdrom for playing music, yet my permissions for that are in tact. I've also experienced sound not working in KDE2 if I happen to go into Gnome first, logout, and then login in KDE2. Any ideas and solutions would be much appreciated. --- Arlen Carlson [EMAIL PROTECTED] I must have a prodigious quantity of mind; it takes me as much as a week sometimes to make it up. -- Mark Twain, The Innocents Abroad This message was sent by XFmail (Linux) -o) /\\ _\_v The penguins are coming... the penguins are coming... ---
Re: Poor sound in GNOME
Thanks for the suggestion. It turns out that the three sounds in the gtk-events folder (clicked.wav, activate.wav, and toggled.wav) have the clicky staticky sound, but none of the other WAV files I played do. So I think the gtk-events sounds just suck, and I'll replace them. - Kris Jonathan Lupa wrote: On Thursday, June 10, 1999 5:30 AM, Kristopher Johnson [SMTP:[EMAIL PROTECTED] wrote: Can anyone suggest any possible fixes? DISCLAIMER: All of this is to the best of my knowledge which is somewhat limited, but I'm sure someone will step up to correct me if I'm wrong! =) I had a problem similar to this very recently with my SB AWE32 PnP. It turns out that the driver was having problems allocating DMA buffers because low address memory had become so fragmented. Since I have a decent amount of RAM (128M), I recompiled the kernel to load up the DMA buffers at load time and maintain them. This can be done 2 ways: 1. If you compiled sound support as a module, you need to pass the parameter dmabuf=1 to the module when it loads. Read the man page on update-modules for more information about how to get that into /etc/conf.modules. 2. If you compiled sound support directly into the kernel, there is an option in the sound menu to preserve DMA buffers. mark it Y and recompile. CAVEAT 1: This may not really be the problem you are looking at. If not, I can't think of anything to try. =( BONUS: Even if it is not, if you have a reasonable amount of memory, it isn't going to hurt anything by doing this. CAVEAT 2: If you are using the kernel autoloader to load sound support, that may not be the best idea. I would either stic k it in /etc/modules, or compile support in as necessary. Good Luck -Jonathan Lupa ~ [EMAIL PROTECTED]
Poor sound in GNOME
When sounds play when I'm running GNOME, the sounds have a staticky click or pop at the end of them. I assume that this is some problem with ESD, but I'm not sure. The bad sounds don't happen when I'm not running GNOME. They also didn't happen when I used GNOME with Red Hat on this machine. I have a SoundBlaster AWE64 sound card. Can anyone suggest any possible fixes? - KDJ
RE: Poor sound in GNOME
On Thursday, June 10, 1999 5:30 AM, Kristopher Johnson [SMTP:[EMAIL PROTECTED] wrote: Can anyone suggest any possible fixes? DISCLAIMER: All of this is to the best of my knowledge which is somewhat limited, but I'm sure someone will step up to correct me if I'm wrong! =) I had a problem similar to this very recently with my SB AWE32 PnP. It turns out that the driver was having problems allocating DMA buffers because low address memory had become so fragmented. Since I have a decent amount of RAM (128M), I recompiled the kernel to load up the DMA buffers at load time and maintain them. This can be done 2 ways: 1. If you compiled sound support as a module, you need to pass the parameter dmabuf=1 to the module when it loads. Read the man page on update-modules for more information about how to get that into /etc/conf.modules. 2. If you compiled sound support directly into the kernel, there is an option in the sound menu to preserve DMA buffers. mark it Y and recompile. CAVEAT 1: This may not really be the problem you are looking at. If not, I can't think of anything to try. =( BONUS: Even if it is not, if you have a reasonable amount of memory, it isn't going to hurt anything by doing this. CAVEAT 2: If you are using the kernel autoloader to load sound support, that may not be the best idea. I would either stic k it in /etc/modules, or compile support in as necessary. Good Luck -Jonathan Lupa ~ [EMAIL PROTECTED]