Stefano Bossi stefano.bo...@gmail.com>
>
> Antworten an: <mailto:dev@plc4x.apache.org>
>
> Datum: Dienstag, 1. September 2020 um 10:40
>
> An: <mailto:dev@plc4x.apache.org>
>
> Betreff: Re: Adding Using PLC4X with Grade to documentation ... WAS: Re:
> S
... WAS: Re: S7
read issue
:-)
Ok, I think i have added to the project the incredible quantity of 20 line of
documentation with a Pull Request
WOW, I am officially an open source community contributor !!!
Regards,
S.
On 01/09/2020 11:10, Christofer Dutz wrote:
And if you have problems
whip up a PR for our documentation …
> it’s also in the same repo under src/site/asciidoc …
>
>
>
> Chris
>
>
>
>
>
>
>
> Von: Stefano Bossi <mailto:stefano.bo...@gmail.com>
>
> Antworten an: <mailto:dev@plc4x.apache.org>
>
> Datum: Montag, 31
documentation ... WAS: Re: S7
read issue
ok, I try, I will read how to do a PR and I will add the documentation on git.
Ciao,
S.
On 01/09/2020 09:18, Christofer Dutz wrote:
Hi Stefano,
it would be super-great if you could whip up a PR for our documentation … it’s
also in the same repo under src
…
>
> Chris
>
>
>
> Von: Stefano Bossi
> Antworten an:
> Datum: Montag, 31. August 2020 um 15:18
> An:
> Betreff: Re: S7 read issue
>
>
> Hi Sebastian,
>
> Chris wrote a very good page on how to compile the library which is a very
> big software: ht
… the folks from
>>>> NodeRed made a nice video:
>>>> https://www.youtube.com/watch?v=rTUs-_EiZ3A
>>>> <https://www.youtube.com/watch?v=rTUs-_EiZ3A> (Just the first 1,5 minutes)
>>>>
>>>> But the driver should definitely report th
Hi Stefano,
it would be super-great if you could whip up a PR for our documentation … it’s
also in the same repo under src/site/asciidoc …
Chris
Von: Stefano Bossi
Antworten an:
Datum: Montag, 31. August 2020 um 15:18
An:
Betreff: Re: S7 read issue
Hi Sebastian,
Chris wrote a very good
t; >
>> >
>> >
>> > Von: Sebastian Voss
<mailto:svdevl...@gmail.com>
>> > Antworten an: "dev@plc4x.apache.org" <mailto:dev@plc4x.apache.org>
<mailto:dev@plc4x.apache.org>
>> > Datum: M
/watch?v=rTUs-_EiZ3A
>> <https://www.youtube.com/watch?v=rTUs-_EiZ3A> (Just the first 1,5 minutes)
>> >
>> > But the driver should definitely report this … as it is a known thing
>> and if we reported that it would help a lot of others.
>> &
; <https://www.youtube.com/watch?v=rTUs-_EiZ3A> (Just the first 1,5 minutes)
>> >
>> > But the driver should definitely report this … as it is a known thing
>> and if we reported that it would help a lot of others.
>> >
>> > Chris
>>
rst 1,5 minutes)
> >
> > But the driver should definitely report this … as it is a known thing
> and if we reported that it would help a lot of others.
> >
> > Chris
> >
> >
> >
> >
> > Von: Sebastian
lc4x.apache.org"
> Datum: Montag, 31. August 2020 um 10:49
> An: "dev@plc4x.apache.org"
> Betreff: Re: S7 read issue
>
> Hi Chris, Hi Stefano,
>
> Thanks a lot for your valuable feedback. It is highly appreciated.
>
> I fol
Von: Sebastian Voss
> Antworten an: "dev@plc4x.apache.org"
> Datum: Montag, 31. August 2020 um 10:49
> An: "dev@plc4x.apache.org"
> Betreff: Re: S7 read issue
>
> Hi Chris, Hi Stefano,
>
> Thanks a lot for your valuable feedback. It is highly apprec
9
An: "dev@plc4x.apache.org"
Betreff: Re: S7 read issue
Hi Chris, Hi Stefano,
Thanks a lot for your valuable feedback. It is highly appreciated.
I followed Stefanos suggestions and applied the simplifications. In addition I
created a Wireshark capture which is attached to this email.
It seems it
Hi Chris, Hi Stefano,
Thanks a lot for your valuable feedback. It is highly appreciated.
I followed Stefanos suggestions and applied the simplifications. In addition I
created a Wireshark capture which is attached to this email.
It seems it replies with “[Error code: This service is not impleme
Hi Sebastian,
if you need some help in setup the wireshark capture software or open
the jira ticket I could help.
It’s definitely worth to follow the Chris suggestion to help him to spot
the real problem.
In the mean time I think you could simplify the PLC query in this way:
|String Url: s7:tcp
Hi Sebastian,
could you possibly do a wireshark recording of this, create an issue in our
jira and attach the capture there?
I am sure we haven't handled all things that could go wrong and with this
information I might be able to improve the error handling.
Chris
Am 30.08.20, 18:28 schrieb
Hi,
I’m trying to read a value from an Siemens S7-1200 PLC). This is my first
project using the S7 protocol and plc4x. When I try to read a value the read
request is not being executed (I also do not receive an error message or
timeout). Would this be the normal behaviour when the field address
18 matches
Mail list logo
