Re: [VOTE] Release Apache Flume version 1.7.0 RC2
This vote is now closed. I will send out the results in a separate email. Thanks to all who voted! Thank you, Donat On Mon, Oct 17, 2016 at 3:31 AM, Brock Noland wrote: > +1 (binding) > > Checked sigs and hashes, manual inspection of various other aspects. > > On Thu, Oct 13, 2016 at 12:54 PM, Hari Shreedharan > wrote: > >> +1 (binding) >> >> Signatures and checksums look good >> Top level files are all good. >> Build runs fine, simple agent with Seq source, memory channel and HDFS >> sink run fine as well. >> >> On Thu, Oct 13, 2016 at 8:42 AM, Mike Percy wrote: >> > +1 (binding) >> > >> > There are some flaky tests which are listed below but I don't think they >> > are release blockers. >> > >> > I performed the following checks: >> > >> > Binary convenience artifact: >> > * Signature and checksums match >> > * LICENSE, NOTICE, and README.md files in the binary convenience artifact >> > look accurate and complete relative to the jars in lib/ >> > * Ran a very quick test with the binary artifact and it >> > worked: ./bin/flume-ng agent -c conf -f >> > conf/flume-conf.properties.template -n >> > agent -Dflume.root.logger=DEBUG,console >> > * Checked that the documentation in docs/ renders: Flume User Guide and >> > Flume Dev Guide are OK. Also spot-checked that the new Kafka security >> > documentation was included in the User Guide >> > >> > Source artifact: >> > * Signature and checksums match >> > * Built Flume from the source artifact using Oracle 1.7.0_80 on Ubuntu >> > Linux 16.04, sanity tested the resulting binary using the above method >> and >> > it worked >> > * RAT checks passed >> > * Built a new source artifact out of the official source artifact and >> > compiled it >> > * I ran the unit tests. Most passed but the below two failed. These are >> > flaky tests (we have a bunch of them in Flume) so I think it's fine not >> to >> > block the release on them. >> > * TestExecSource.testMonitoredCounterGroup - looks like a racy test >> > * TestSpillableMemoryChannel - didn't investigate >> > >> > RC2 looks good to me. >> > >> > Thanks for running this release, Donat! >> > >> > Mike >> > >> > On Wed, Oct 12, 2016 at 9:29 PM, Balazs Donat Bessenyei < >> bes...@cloudera.com >> >> wrote: >> > >> >> Hi All, >> >> >> >> This is the tenth release for Apache Flume as a top-level project, >> >> version 1.7.0. We are voting on release candidate RC2. >> >> >> >> It fixes the following issues: >> >> https://raw.githubusercontent.com/apache/flume/flume-1.7/CHANGELOG >> >> >> >> *** Please cast your vote within the next 72 hours *** >> >> >> >> The tarball (*.tar.gz), signature (*.asc), and checksums (*.md5, *.sha1) >> >> for the source and binary artifacts can be found here: >> >> http://people.apache.org/~bessbd/apache-flume-1.7.0-rc2/ >> >> >> >> Maven staging repo: >> >> https://repository.apache.org/content/repositories/ >> orgapacheflume-1020/ >> >> >> >> The tag to be voted on: >> >> https://git-wip-us.apache.org/repos/asf?p=flume.git;a= >> commit;h=511d868 >> >> >> >> Flume's KEYS file containing PGP keys we use to sign the release: >> >> https://www.apache.org/dist/flume/KEYS >> >> >> >> >> >> Thank you, >> >> >> >> Donat >> >> >>
Re: [VOTE] Release Apache Flume version 1.7.0 RC2
+1 (binding) Checked sigs and hashes, manual inspection of various other aspects. On Thu, Oct 13, 2016 at 12:54 PM, Hari Shreedharan wrote: > +1 (binding) > > Signatures and checksums look good > Top level files are all good. > Build runs fine, simple agent with Seq source, memory channel and HDFS > sink run fine as well. > > On Thu, Oct 13, 2016 at 8:42 AM, Mike Percy wrote: > > +1 (binding) > > > > There are some flaky tests which are listed below but I don't think they > > are release blockers. > > > > I performed the following checks: > > > > Binary convenience artifact: > > * Signature and checksums match > > * LICENSE, NOTICE, and README.md files in the binary convenience artifact > > look accurate and complete relative to the jars in lib/ > > * Ran a very quick test with the binary artifact and it > > worked: ./bin/flume-ng agent -c conf -f > > conf/flume-conf.properties.template -n > > agent -Dflume.root.logger=DEBUG,console > > * Checked that the documentation in docs/ renders: Flume User Guide and > > Flume Dev Guide are OK. Also spot-checked that the new Kafka security > > documentation was included in the User Guide > > > > Source artifact: > > * Signature and checksums match > > * Built Flume from the source artifact using Oracle 1.7.0_80 on Ubuntu > > Linux 16.04, sanity tested the resulting binary using the above method > and > > it worked > > * RAT checks passed > > * Built a new source artifact out of the official source artifact and > > compiled it > > * I ran the unit tests. Most passed but the below two failed. These are > > flaky tests (we have a bunch of them in Flume) so I think it's fine not > to > > block the release on them. > > * TestExecSource.testMonitoredCounterGroup - looks like a racy test > > * TestSpillableMemoryChannel - didn't investigate > > > > RC2 looks good to me. > > > > Thanks for running this release, Donat! > > > > Mike > > > > On Wed, Oct 12, 2016 at 9:29 PM, Balazs Donat Bessenyei < > bes...@cloudera.com > >> wrote: > > > >> Hi All, > >> > >> This is the tenth release for Apache Flume as a top-level project, > >> version 1.7.0. We are voting on release candidate RC2. > >> > >> It fixes the following issues: > >> https://raw.githubusercontent.com/apache/flume/flume-1.7/CHANGELOG > >> > >> *** Please cast your vote within the next 72 hours *** > >> > >> The tarball (*.tar.gz), signature (*.asc), and checksums (*.md5, *.sha1) > >> for the source and binary artifacts can be found here: > >> http://people.apache.org/~bessbd/apache-flume-1.7.0-rc2/ > >> > >> Maven staging repo: > >> https://repository.apache.org/content/repositories/ > orgapacheflume-1020/ > >> > >> The tag to be voted on: > >> https://git-wip-us.apache.org/repos/asf?p=flume.git;a= > commit;h=511d868 > >> > >> Flume's KEYS file containing PGP keys we use to sign the release: > >> https://www.apache.org/dist/flume/KEYS > >> > >> > >> Thank you, > >> > >> Donat > >> >
Re: [VOTE] Release Apache Flume version 1.7.0 RC2
+1 (binding) Signatures and checksums look good Top level files are all good. Build runs fine, simple agent with Seq source, memory channel and HDFS sink run fine as well. On Thu, Oct 13, 2016 at 8:42 AM, Mike Percy wrote: > +1 (binding) > > There are some flaky tests which are listed below but I don't think they > are release blockers. > > I performed the following checks: > > Binary convenience artifact: > * Signature and checksums match > * LICENSE, NOTICE, and README.md files in the binary convenience artifact > look accurate and complete relative to the jars in lib/ > * Ran a very quick test with the binary artifact and it > worked: ./bin/flume-ng agent -c conf -f > conf/flume-conf.properties.template -n > agent -Dflume.root.logger=DEBUG,console > * Checked that the documentation in docs/ renders: Flume User Guide and > Flume Dev Guide are OK. Also spot-checked that the new Kafka security > documentation was included in the User Guide > > Source artifact: > * Signature and checksums match > * Built Flume from the source artifact using Oracle 1.7.0_80 on Ubuntu > Linux 16.04, sanity tested the resulting binary using the above method and > it worked > * RAT checks passed > * Built a new source artifact out of the official source artifact and > compiled it > * I ran the unit tests. Most passed but the below two failed. These are > flaky tests (we have a bunch of them in Flume) so I think it's fine not to > block the release on them. > * TestExecSource.testMonitoredCounterGroup - looks like a racy test > * TestSpillableMemoryChannel - didn't investigate > > RC2 looks good to me. > > Thanks for running this release, Donat! > > Mike > > On Wed, Oct 12, 2016 at 9:29 PM, Balazs Donat Bessenyei > wrote: > >> Hi All, >> >> This is the tenth release for Apache Flume as a top-level project, >> version 1.7.0. We are voting on release candidate RC2. >> >> It fixes the following issues: >> https://raw.githubusercontent.com/apache/flume/flume-1.7/CHANGELOG >> >> *** Please cast your vote within the next 72 hours *** >> >> The tarball (*.tar.gz), signature (*.asc), and checksums (*.md5, *.sha1) >> for the source and binary artifacts can be found here: >> http://people.apache.org/~bessbd/apache-flume-1.7.0-rc2/ >> >> Maven staging repo: >> https://repository.apache.org/content/repositories/orgapacheflume-1020/ >> >> The tag to be voted on: >> https://git-wip-us.apache.org/repos/asf?p=flume.git;a=commit;h=511d868 >> >> Flume's KEYS file containing PGP keys we use to sign the release: >> https://www.apache.org/dist/flume/KEYS >> >> >> Thank you, >> >> Donat >>
Re: [VOTE] Release Apache Flume version 1.7.0 RC2
+1 (binding) There are some flaky tests which are listed below but I don't think they are release blockers. I performed the following checks: Binary convenience artifact: * Signature and checksums match * LICENSE, NOTICE, and README.md files in the binary convenience artifact look accurate and complete relative to the jars in lib/ * Ran a very quick test with the binary artifact and it worked: ./bin/flume-ng agent -c conf -f conf/flume-conf.properties.template -n agent -Dflume.root.logger=DEBUG,console * Checked that the documentation in docs/ renders: Flume User Guide and Flume Dev Guide are OK. Also spot-checked that the new Kafka security documentation was included in the User Guide Source artifact: * Signature and checksums match * Built Flume from the source artifact using Oracle 1.7.0_80 on Ubuntu Linux 16.04, sanity tested the resulting binary using the above method and it worked * RAT checks passed * Built a new source artifact out of the official source artifact and compiled it * I ran the unit tests. Most passed but the below two failed. These are flaky tests (we have a bunch of them in Flume) so I think it's fine not to block the release on them. * TestExecSource.testMonitoredCounterGroup - looks like a racy test * TestSpillableMemoryChannel - didn't investigate RC2 looks good to me. Thanks for running this release, Donat! Mike On Wed, Oct 12, 2016 at 9:29 PM, Balazs Donat Bessenyei wrote: > Hi All, > > This is the tenth release for Apache Flume as a top-level project, > version 1.7.0. We are voting on release candidate RC2. > > It fixes the following issues: > https://raw.githubusercontent.com/apache/flume/flume-1.7/CHANGELOG > > *** Please cast your vote within the next 72 hours *** > > The tarball (*.tar.gz), signature (*.asc), and checksums (*.md5, *.sha1) > for the source and binary artifacts can be found here: > http://people.apache.org/~bessbd/apache-flume-1.7.0-rc2/ > > Maven staging repo: > https://repository.apache.org/content/repositories/orgapacheflume-1020/ > > The tag to be voted on: > https://git-wip-us.apache.org/repos/asf?p=flume.git;a=commit;h=511d868 > > Flume's KEYS file containing PGP keys we use to sign the release: > https://www.apache.org/dist/flume/KEYS > > > Thank you, > > Donat >
Re: [VOTE] Release Apache Flume version 1.7.0 RC2
Hi Folks, +1 on this Release Candidate * hashes and signatures match * build and run environment was Mac OSX El Capitan 10.11.5, Java HotSpot(TM) 64-Bit Server VM (build 24.79-b02, mixed mode) * in src tarball * Sources of flume-checkstyle module is not included. Rest of the files are there compared to apache git repo. As discussed it is not a release blocker (checkstyle was removed intentionally from src tarball). * "mvn clean install -DskipTest" builds * "mvn test" passed * in bin tarball * verified content of lib dir against the LICENCE file whether "each jar shipped is included in the LICENCE" and "each jar mentioned in the LICENCE is shipped". * sanity checked DEVNOTES, README.md, NOTICE, RELEASE-NOTES, doap_Flume.rdf and the content of bin, conf, tools dirs * in docs dir I verified main page, user guide, dev guide, javadocs * executed the "bin/flume-ng agent -n agent -c conf -f conf/flume-conf.properties.template" from user guide which is passed (logs were generated in the logs dir) Cheers, Attila On Thu, Oct 13, 2016 at 3:10 PM, Denes Arvay wrote: > Hi, > > +1 for the RC2 > - checksums and signatures match > - source package successfully built (but skipped the tests), rat and > checkstyle pass > - I was able to start up flume extracted from the binary package with the > sample configuration > > Denes > > On Wed, Oct 12, 2016 at 9:29 PM Balazs Donat Bessenyei < > bes...@cloudera.com> > wrote: > > Hi All, > > > > This is the tenth release for Apache Flume as a top-level project, > > version 1.7.0. We are voting on release candidate RC2. > > > > It fixes the following issues: > > https://raw.githubusercontent.com/apache/flume/flume-1.7/CHANGELOG > > > > *** Please cast your vote within the next 72 hours *** > > > > The tarball (*.tar.gz), signature (*.asc), and checksums (*.md5, *.sha1) > > for the source and binary artifacts can be found here: > > http://people.apache.org/~bessbd/apache-flume-1.7.0-rc2/ > > > > Maven staging repo: > > https://repository.apache.org/content/repositories/orgapacheflume-1020/ > > > > The tag to be voted on: > > https://git-wip-us.apache.org/repos/asf?p=flume.git;a=commit;h=511d868 > > > > Flume's KEYS file containing PGP keys we use to sign the release: > > https://www.apache.org/dist/flume/KEYS > > > > > > Thank you, > > > > Donat >
Re: [VOTE] Release Apache Flume version 1.7.0 RC2
+1, tested simple scenarios on Windows 10 and Ubuntu 16.04. On Thu, Oct 13, 2016 at 5:53 PM, Balazs Donat Bessenyei wrote: > Hi All, > > +1 for the RC2 > > * md5s, sha1s match > * signatures are correct > * mvn clean install -DskipTests runs successfully in the src ; RAT passes > * binary works > * LICENSE, NOTICE and README.md files are in the tar.gz-s > > > Donat > > On Thu, Oct 13, 2016 at 3:10 PM, Denes Arvay wrote: > > Hi, > > > > +1 for the RC2 > > - checksums and signatures match > > - source package successfully built (but skipped the tests), rat and > > checkstyle pass > > - I was able to start up flume extracted from the binary package with the > > sample configuration > > > > Denes > > > > On Wed, Oct 12, 2016 at 9:29 PM Balazs Donat Bessenyei < > bes...@cloudera.com> > > wrote: > > > > Hi All, > > > > > > > > This is the tenth release for Apache Flume as a top-level project, > > > > version 1.7.0. We are voting on release candidate RC2. > > > > > > > > It fixes the following issues: > > > > https://raw.githubusercontent.com/apache/flume/flume-1.7/CHANGELOG > > > > > > > > *** Please cast your vote within the next 72 hours *** > > > > > > > > The tarball (*.tar.gz), signature (*.asc), and checksums (*.md5, *.sha1) > > > > for the source and binary artifacts can be found here: > > > > http://people.apache.org/~bessbd/apache-flume-1.7.0-rc2/ > > > > > > > > Maven staging repo: > > > > https://repository.apache.org/content/repositories/ > orgapacheflume-1020/ > > > > > > > > The tag to be voted on: > > > > https://git-wip-us.apache.org/repos/asf?p=flume.git;a=commit;h=511d868 > > > > > > > > Flume's KEYS file containing PGP keys we use to sign the release: > > > > https://www.apache.org/dist/flume/KEYS > > > > > > > > > > > > Thank you, > > > > > > > > Donat >
Re: [VOTE] Release Apache Flume version 1.7.0 RC2
Hi All, +1 for the RC2 * md5s, sha1s match * signatures are correct * mvn clean install -DskipTests runs successfully in the src ; RAT passes * binary works * LICENSE, NOTICE and README.md files are in the tar.gz-s Donat On Thu, Oct 13, 2016 at 3:10 PM, Denes Arvay wrote: > Hi, > > +1 for the RC2 > - checksums and signatures match > - source package successfully built (but skipped the tests), rat and > checkstyle pass > - I was able to start up flume extracted from the binary package with the > sample configuration > > Denes > > On Wed, Oct 12, 2016 at 9:29 PM Balazs Donat Bessenyei > wrote: > > Hi All, > > > > This is the tenth release for Apache Flume as a top-level project, > > version 1.7.0. We are voting on release candidate RC2. > > > > It fixes the following issues: > > https://raw.githubusercontent.com/apache/flume/flume-1.7/CHANGELOG > > > > *** Please cast your vote within the next 72 hours *** > > > > The tarball (*.tar.gz), signature (*.asc), and checksums (*.md5, *.sha1) > > for the source and binary artifacts can be found here: > > http://people.apache.org/~bessbd/apache-flume-1.7.0-rc2/ > > > > Maven staging repo: > > https://repository.apache.org/content/repositories/orgapacheflume-1020/ > > > > The tag to be voted on: > > https://git-wip-us.apache.org/repos/asf?p=flume.git;a=commit;h=511d868 > > > > Flume's KEYS file containing PGP keys we use to sign the release: > > https://www.apache.org/dist/flume/KEYS > > > > > > Thank you, > > > > Donat
Re: [VOTE] Release Apache Flume version 1.7.0 RC2
Hi, +1 for the RC2 - checksums and signatures match - source package successfully built (but skipped the tests), rat and checkstyle pass - I was able to start up flume extracted from the binary package with the sample configuration Denes On Wed, Oct 12, 2016 at 9:29 PM Balazs Donat Bessenyei wrote: Hi All, This is the tenth release for Apache Flume as a top-level project, version 1.7.0. We are voting on release candidate RC2. It fixes the following issues: https://raw.githubusercontent.com/apache/flume/flume-1.7/CHANGELOG *** Please cast your vote within the next 72 hours *** The tarball (*.tar.gz), signature (*.asc), and checksums (*.md5, *.sha1) for the source and binary artifacts can be found here: http://people.apache.org/~bessbd/apache-flume-1.7.0-rc2/ Maven staging repo: https://repository.apache.org/content/repositories/orgapacheflume-1020/ The tag to be voted on: https://git-wip-us.apache.org/repos/asf?p=flume.git;a=commit;h=511d868 Flume's KEYS file containing PGP keys we use to sign the release: https://www.apache.org/dist/flume/KEYS Thank you, Donat