Thanks, Paul,
I did not notice first the bottom tabs, when I found the advanced
options, I installed the BT packages.
However, I was blocked by the warning at the Beta tab, "can corrupt your
SD!!" so I could not find how to start the daemon from the interface...
Now it's working and is up since
On the Bluetooth configuration page, did you press install to load the
extra bluetooth stuff?
25054
+---+
|Filename: Screenshot from 2018-05-20 09-17-26.png |
|Download:
hciconfig... not found
dmesg | grep Bluetooth returns nothing..
town: Musical Fidelity Dr.Thomas, Preamp II, Infinity 7K, Squeezebox
Classic (2), Squeezebox Radio, Raspberry Pi 2 with HiFiBerry, Ubuntu
16.4 LTS server
country: Musical Fidelity A-5, Infinity Renaissance 90, Musical Fidelity
Hi Paul,
I followed the instructions from the link you provided:
If you have a computer that is running Windows (7 - 64bits for me) you
can modify the "initial device bootmode".
To change the device bootmode :
Download the BlueSuite to modifiy "BlueCore Persistent Store" :
Google it, likely the device is not starting in HCI mode. You will
probably need to attach it to a windows machine, use the windows
software to reconfigure the device to power up in HCI mode.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage:
Hi Paul,
dmesg reports:
[2.685704] usb 1-1.3: Product: CSR8510 A10
Bluetooth v4.0 Specification
CSR8510A10
Features
Fully qualified Bluetooth v4.0 specification system
Support for Bluetooth v3.0 only available with CSR8510A10
Dual-mode Bluetooth /Bluetooth low energy
Draft Bluetooth low
You don't need to do anything other than what you've done... The
controller is not being found. What brand USB/BT dongle, are you using.
Not all are compatible. It needs to support HCI mode.
Please look at dmesg as suggested to see what is being detected by the
OS.
piCorePlayer a
must add that..
- using on board wifi
- turned off on board BT
- USB BT dongle plugged in
town: Musical Fidelity Dr.Thomas, Preamp II, Infinity 7K, Squeezebox
Classic (2), Squeezebox Radio, Raspberry Pi 2 with HiFiBerry, Ubuntu
16.4 LTS server
country: Musical Fidelity A-5, Infinity
OK Paul..
fresh install, Squeezelite is running, wifi connected.
[Squeezelite settings]
"Do this First: Select Audio output, then press [ Save ]"
select Bluetooth Audio, Save
"Squeezelite is NOT running"
??
Bluetooth Speaker Setup
BT Controller is Off less>
= BT Controller Power
Its built into the interface, just try it.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://sites.google.com/site/picoreplayer/home
Please 'donate'
it looks that v3.5 now supports BT Audio.
I tried that, but the setup interface it is somewhat obscure.
I wasn't able to find a tutorial.. and my knowledge of tinycore linux is
limited..
?
town: Musical Fidelity Dr.Thomas, Preamp II, Infinity 7K, Squeezebox
Classic (2), Squeezebox Radio,
So no chance on a newbie manual for that
*SqueezeBoxes:* 2x SB2 (Living room and study), 1x Radio (Kitchen), 1x
Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x piCorePlayer (Garden)
1x OSMC + Squeezelite (Movie room), 1x Touch (Bedroom)
*Server:* LMS on Pi3 7.9.1. on PcP 3.21
*Network:* AVM
Yes, but a long, long way from being integrated.. right now, this
would only work for the extremely advanced linux user.
paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858
View this thread:
Eh, newbie here. Does this mean that a pcp player can stream to bt
speaker? How to install?
*SqueezeBoxes:* 2x SB2 (Living room and study), 1x Radio (Kitchen), 1x
Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x piCorePlayer (Garden)
1x OSMC + Squeezelite (Movie room), 1x Touch (Bedroom)
Using the bluez-alsa project. Squeezelite is actually playing nicely
to a bluetooth speaker.
paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858
View this thread:
See also this post http://forums.slimdevices.com/showthread.php?t=107763
*SqueezeBoxes:* 2x SB2 (Living room and study), 1x Radio (Kitchen), 1x
Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x piCorePlayer (Garden)
1x OSMC + Squeezelite (Movie room), 1x Touch (Bedroom)
*Server:* LMS1 7.7.3 on
I always thought that support for Bluetooth remote control (AVRCP) would
be the preferred BT feature as BT remote control are cheap or use BT RC
phone apps - instead of IR.
bpa's Profile:
Max2play has two bt features. 1. Connect to bt speaker. 2. Utilize BT
source (phone?) as LMS url stream. (I think to be able to broadcast a
spoken message to all connected SB's)
*SqueezeBoxes:* 2x SB2 (Living room and study), 1x Radio (Kitchen), 1x
Boom (Dining room), 1x piCorePlayer
epoch1970 wrote:
> Wow. I didn't know that. Sorry.
Don't be sorry - these issues are not obvious. IIRC Bluez 5 dumped Alsa
support. Messing with Bluetooth is not for faint hearted (look at
Castalla threads) and then add in pcp complexities.
It's not impossible - Max2play provide Bluetooth
bpa wrote:
> IIRC Bluez normally only works with pulseaudio - is pulseaudio installed
> on pcp. I think squeezlite with pulseaudio has only recently been fixed
> by ralphy not sure if it is on pcp.
Wow. I didn't know that. Sorry.
3 SB 3 Libratone Loop, Zipp Mini iPeng (iPhone + iPad)
epoch1970 wrote:
> PCP ships with bluetooth kernel modules and bluez.tcz is available from
> the piCore repo, assuming the binaries work I guess you have all you
> need. No GUI though.
> (I'm not saying it works... I only use bluetooth under extreme duress.)
IIRC Bluez normally only works with
PCP ships with bluetooth kernel modules and bluez.tcz is available from
the piCore repo, assuming the binaries work I guess you have all you
need. No GUI though.
(I'm not saying it works... I only use bluetooth under extreme duress.)
3 SB 3 Libratone Loop, Zipp Mini iPeng (iPhone + iPad)
Just to see what I can do with it.. Maybe
jouteur's Profile: http://forums.slimdevices.com/member.php?userid=67128
View this thread: http://forums.slimdevices.com/showthread.php?t=107788
paul- wrote:
> Yes, all theoretically possible. But it's not currently developed for
> piCore or pCP. I'm not sure anyone on the dev team wants to work on it
> either. I'm not overly interested.
It's a contradiction in terms. Hi fi 24 bit perfect capable audio player
outputting to decidedly
paul- wrote:
> Yes, all theoretically possible. But it's not currently developed for
> piCore or pCP. I'm not sure anyone on the dev team wants to work on it
> either. I'm not overly interested.
OK thank you for that clarity
Yes, all theoretically possible. But it's not currently developed for
piCore or pCP. I'm not sure anyone on the dev team wants to work on it
either. I'm not overly interested.
paul-'s Profile:
po...@lns.com wrote:
> This article claims you can...
>
> https://www.raspberrypi.org/magpi/bluetooth-audio-raspberry-pi-3/
>
> On 8/2/17 6:19 AM, jouteur wrote
> > Hi
> >
> > I have try to find that info but can't
> > can we set-up a bluetooth connection to a bluetooth speaker with that
> >
This article claims you can...
https://www.raspberrypi.org/magpi/bluetooth-audio-raspberry-pi-3/
On 8/2/17 6:19 AM, jouteur wrote
> Hi
>
> I have try to find that info but can't
> can we set-up a bluetooth connection to a bluetooth speaker with that
> pi3
>
> thanks
28 matches
Mail list logo
