Hi Mike,
thanks for the reply. I did have the d_plugins flag set just to get
these messages... here is a snip (farther down) of my entire log when I
refresh the plugins through the web interface... I don't get any other
errors, just the 'getDisplayName' problem for Biography and Forecast.
All
thanks for the reply. I did have the d_plugins flag set just to get
these messages... here is a snip (farther down) of my entire log when I
refresh the plugins through the web interface... I don't get any other
errors, just the 'getDisplayName' problem for Biography and Forecast.
All the
Well, I just stopped and restarted slimserver twice to try and see if
there were additional log entries for the plugins on a fresh
startup(there weren't). But, this time Biography started up fine.
Forcast, still didn't start. Strange.
Jess Askey wrote:
Hi Mike,
thanks for the reply. I did have
These were the only additional log entries...prior to the Plugins loading.
Use of uninitialized value in concatenation (.) or string at
/usr/local/slimserver/Slim/Buttons/Plugins.pm line 82, DATA line 1.
Use of uninitialized value in string comparison (cmp) at
On Tue, 26 Apr 2005 09:20:42 +0200, Jess Askey [EMAIL PROTECTED] wrote:
Well, I just stopped and restarted slimserver twice to try and see if
there were additional log entries for the plugins on a fresh
Did you start slimserver.pl -d_plugins?
startup(there weren't). But, this time Biography
Bromo,
I have a simple rule with my Mac, if the box has got Norton written on it its not going in my Mac.
Remember their Crashguard that always crashed on startup?
I would ditch Norton and use the inbuilt firewall, which, in conjunction with your router one, will give you more than enough
As a courtesy to those using the forums - could those using email please trim
their posts to only quote the relevant material? I just read a post with 2
new lines of data, and over 100 quoted.
Thanks.
-D
--
Off the record, on the QT, and very hush-hush.
Quoting Jess Askey [EMAIL PROTECTED]:
These were the only additional log entries...prior to the Plugins loading.
Use of uninitialized value in concatenation (.) or string at
/usr/local/slimserver/Slim/Buttons/Plugins.pm line 82, DATA line 1.
Use of uninitialized value in string comparison
As a courtesy to those using the forums - could those using email please
trim
their posts to only quote the relevant material? I just read a post with
2 new lines of data, and over 100 quoted.
No names, please :-/. I'll do my best. And did you really count them? ;-)
--
Michael
As a courtesy to those using the forums - could those using email please trim
their posts to only quote the relevant material?
No need to single out forum or email users. The same ettiquette should apply
to all.
Phil
___
Discuss mailing list
Perhaps I am expecting too much in which case please feel free to say so
! I'm a longtime happy slim owner - up until recently I've run the 5.4
server on a martian netdrive (low power linux box), but, for closer
integration with itunes and my ipod etc, I've decided to experiment
with putting the
Justme Wrote:
Of note, my machine isn't the fastest, it's a 1ghz Athlon, 1 gig RAM, XP
Pro machine (with loads of HD space free), but this is the only speed
issue I have with it.
I've seen the same symptoms as you. But my server is a 533MHz mini-ITX
with just 256MB RAM running Win2000 Pro.
Have you changed the default iTunes library scan interval?
With it set to the default of 60s, SlimServer will be scanning the
iTunes library constantly while you are ripping.
James
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of gocam
Sent: 26 April
I selected Monday night's Late Junction from AlienBBC, hit play (from
the web interface), got a burst of noise and then the SB2 display
locked up showing the programme with the right VDU at max and the left
near min, and no sound. The server's still running and having recycled
the SB2 it's now
My wireless SB2 is connected wirelessly via a router to the server. It
is a permanent on connection which works very well except from time to
time (2-3 times a week) the clock screensaver stops at a certain time.
When I turn the SB2 back on, the clock rolls forward to the correct time
and then
sounds interesting, but how does one change the i-tunes scanning
frequency? (might be obvious but I can not see how!)
--
mcauter
___
Discuss mailing list
Discuss@lists.slimdevices.com
http://lists.slimdevices.com/lists/listinfo/discuss
Server Settings - iTunes - iTunes Reload interval
James
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of mcauter
Sent: 26 April 2005 11:56
To: discuss@lists.slimdevices.com
Subject: [slim] Re: iTunes / OSX / Mac Mini / Ripping = yikes
sounds
Quoting mcauter [EMAIL PROTECTED]:
sounds interesting, but how does one change the i-tunes scanning
frequency? (might be obvious but I can not see how!)
server settings-itunes
itunes reload interval.
-kdf
___
Discuss mailing list
Radish - keep us posted on your progress - this is a crucial feature for
me too. I haven't got an SB2 yet so this could be a show stopper if it's
a widespread bug.
Does anyone actually have this working successfully?
--
chrisal
___
Discuss mailing
So um I can't be the only person 6.0.2 doesn't work for?
Undefined subroutine Slim::Buttons::Common::setFunction called at
C:/Program Files/SlimServer v6/server/Plugins/Favorites/Plugin.pm line
211.
!
James
-
NOTICE: If received in
OK i have now RTFMed and checked out more detauls
I now get normal music played. YES!!
AlienBBC Radio 4 is displayed on softsqueeze but no sound... Any
ideas?
I'm using XP SP2 on a notebook.
Regards
Paul
--
pharmswo
___
Discuss mailing list
Will do. It does work sometimes, it's just not reliable. From what I can
tell it works most often when the source file is not flac, and works
least often when it is. It also seems to be consistent with tracks - a
given album either will always work or will never work.
--
radish
Hmmm...the Favorites plugin is a 6.1 feature and seems to depend on 6.1
APIs. I presume you went from 6.1 to 6.0.2. For now, please manually
remove it from your Plugins directory.
Craig, James (IT) wrote:
So um I can't be the only person 6.0.2 doesn't work for?
Undefined subroutine
Whoops that would explain it!
thanks
James
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Vidur
Apparao
Sent: 26 April 2005 14:59
To: Slim Devices Discussion
Subject: Re: [slim] 6.0.2 Release Candidate
Hmmm...the Favorites plugin is a 6.1 feature
I downloaded the trial for Telcanto onto an AXIM X30 yesterday and I
have a question about it.
I prefer to browse per my music folder as opposed to by Album, Artist,
Genre, etc.
The problem that I have while browsing my music folder, that I do not
have while browsing my library by artist,
Hi, I had another thread on TelCanto earlier and got this link to a
forum specifically about TelCanto where you may get a better answer.
http://groups.yahoo.com/group/telcanto
On 4/26/05, bjmacdow [EMAIL PROTECTED] wrote:
I downloaded the trial for Telcanto onto an AXIM X30 yesterday and I
I'm trying to get SoftSqueeze on WinXP to synchronize with my new SB2.
No matter what I do it remains between 1/2 - 1/4 second delayed.
I've gone through the checklist at
http://softsqueeze.sourceforge.net/sync.html
- I've upgraded to 2.0b6 and SlimServer 6.0.1 - 2895 (running on
Win2003,
Bug 1289 is on the original list of issues you hoped to fix for 6.02,
but it hasn't been fixed yet. I would really appreciate it if you tried
to get it in - Radish and I have posted multiple logs and have been
actively working on gathering enough data for Vidur to diagnose and
address it.
Bug
On 26/4/05 at 6:42 am -0700, pharmswo wrote
AlienBBC Radio 4 is displayed on softsqueeze but no sound... Any
ideas?
Same as before.
Does it work with mplayer? You may have the wrong version of the codec.
--
Daniel Cohen
___
Discuss mailing list
Is there any means by which the data samples sent to the Squeezebox 1 or
Squeezebox 2 can be up-sampled to 24-bits, prior to implementing volume
control? If this were done, then when playing 16-bit streams, such as
FLAC tracks, up to 48 dB of digital attenuation could be effected
without any
I experience this as well running SlimServer 6.0.1 on a WinXP P4 3.2Ghz,
1 GB RAM, SATA RAID drives. Just received my SB2...
--
earthbased
___
Discuss mailing list
Discuss@lists.slimdevices.com
http://lists.slimdevices.com/lists/listinfo/discuss
radish Wrote:
Well there's a 2 band equaliser (bass/treble) in the settings menu.
I have a SB2 and have NO bass/treble adjustment under SETTINGS. Am I
missing something?
--
earthbased
___
Discuss mailing list
Discuss@lists.slimdevices.com
This is already how it's done.
On Apr 26, 2005, at 8:09 AM, jhenderson010759 wrote:
Is there any means by which the data samples sent to the Squeezebox 1
or
Squeezebox 2 can be up-sampled to 24-bits, prior to implementing volume
control?
___
Discuss
radish Wrote:
Well there's a 2 band equaliser (bass/treble) in the settings menu.
I have a SB2 and have NO bass/treble adjustment under SETTINGS. Am I
missing something?
No, EQ controls are not implemented yet.
___
Discuss mailing list
--- Sean Adams [EMAIL PROTECTED] wrote:
radish Wrote:
Well there's a 2 band equaliser (bass/treble) in
the settings menu.
I have a SB2 and have NO bass/treble adjustment
under SETTINGS. Am I
missing something?
No, EQ controls are not implemented yet.
Perhaps the reference was
This sounds like a software crash got it into a locked-up state. Try
power cycling a few times and see if it snaps out of it. Otherwise
contact [EMAIL PROTECTED] - they may be able to unwedge it for
you, or it may need replacement.
On Apr 26, 2005, at 3:20 AM, Patrick Dixon wrote:
I selected
chrisal wrote:
Radish - keep us posted on your progress - this is a crucial feature for
me too. I haven't got an SB2 yet so this could be a show stopper if it's
a widespread bug.
Does anyone actually have this working successfully?
Yes - gapless playback of FLAC files on SB2 is a working and
This is mainly directed at Richard, but I have seen a few posts about
AlienBBC being displayed but silent in SoftSqueeze, so it may be helpful
in working around that issue as well.
Today I upgraded my SoftSqueeze install on my work PC from 2.0b2 to
2.0b99, my playlist loaded and everything
No - I am - sorry! I forgot they took it out of the SB2 (it was on the
SB1). I believe there's a bug listed to bring back the bass/treble, not
sure if there's an ETA.
--
radish
___
Discuss mailing list
Discuss@lists.slimdevices.com
radish Wrote:
No - I am - sorry! I forgot they took it out of the SB2 (it was on the
SB1). I believe there's a bug listed to bring back the bass/treble, not
sure if there's an ETA.
http://bugs.slimdevices.com/show_bug.cgi?id=1305
Anyone know why this was taken out? I hook my SB2 to a wave
Quoting earthbased [EMAIL PROTECTED]:
radish Wrote:
No - I am - sorry! I forgot they took it out of the SB2 (it was on the
SB1). I believe there's a bug listed to bring back the bass/treble, not
sure if there's an ETA.
http://bugs.slimdevices.com/show_bug.cgi?id=1305
Anyone know why
I'll give that a try and thanks for suggestion - what would be really
good is to have some way of specifying a bracket easily though - you
know, something like a StartRip/EndRip button or such that would cause
it not to try checking the library until I'm done, with me manually
hitting that button
Nice feature having the artist next to the album in the browse album
section.
However it seems to have introduced a bug. The display seems to jump as
it scrolls if there is a title that doesnt fit on one line. This only
occurs in the 'browse album' view and not for example the 'browse
artist'
As a courtesy to those using the forums - could those using email please trim
their posts to only quote the relevant material?
I agree, and I have been making the effort recently.
OTOH, as one who prefers the email interface, I'm finding that
since the advent of people posting to the forum,
Tom McGurk wrote:
Hi All,
I'm trying to set up softsqueeze to access my slimserver on my home PC
(behind a firewall, of course). I can PuTTy into port 22 on the device,
but can't get any connection to the slimserver.
Make sure you are not running slimserver on the machine you are trying
to
Hi,
I have been using an always on hard disk called the Martian Netdrive
for a year now. It runs on some form of Linux (Linux Martian 2.3.20).
It's always worked fine, but having just upgraded to v 6.0.1 of
slimserver (but still using SB1) I am having several problems.
1. It no longer boots
icestorm Wrote:
All,
I've just received the squeezebox2. Great little device! I've bought a
sonic T-amp amplifier for it and it sounds great!
However...When I try to play AAC music from my FreeBSD server, (which
is most of my music collection), I can hear a sound like a constant
wind
icestorm Wrote:
ping? Anyone?
you could try ruling out the flac conversion as an issue by creating a
'mov wav * *' or 'mov aif * *' rule depending on what the byte order is
coming out of faad...
it's possibly a byte swap issue, though... usually when that happens
you can still hear a
I've installed SlimServer 6.01 and SoftSqueeze 2.0b3 to get to grips
with things while I wait for my SB2 to arrive.
This evening I tried integrating MusicMagic. It took a while to get the
two talking to each other, solved only when the mysterious 'Use
MusicMagic Playlist' radio button came to
Strange as MMM should be the process hogging CPE when it's scanning as far
as I can see. Am not sure what slim could be doing. I've actually turned
slim off while MMM is scanning my library - not because it was consuming
CPU, it's just MMM randomly stopped when I had slim on, and it seems to be
Quoting hunta [EMAIL PROTECTED]:
As soon as that was checked things fell into place. However, slim.exe
has been running at near 100% CPU ever since. I guess this is while it
reads the MusicMagic data.
it reads the data fairly fast. The problem is that MusicMagic itself can take
DAYS to run
I just upgraded to Softsqueeze 2.0b6 and now I have no audio. It looks
like it's playing but there is no audio, the timer does not update and
the spectrum does not display.
Originally I tried upgrading to Sofsqueeze 2.0b6 on Slimserver 6.0.1
and noticed this, then upgraded to Slimserver 6.0.2
Make sure all your music is analyzed in Music Magic before you integrate
it with Slim Server. Once it is it is best to do a wipe cache once you
turn on Music Magic support in Slim Server.
--
tvoil
___
Discuss mailing list
Checking the listen.com website looks like a major announcement April
26. Probably the broad release of the 3.0 service with to-go
features.
So has anyone tried the new Rhapsody with the existing Realslim plugin?
Seems unlikely that it'd work but I gave the new rhapsody a try here at work
Just after I posted this, I noticed that after the stream is buffered if
I press pause, then pause again it will begin playing the audio.
If I press the next track button the player will hang and after
waiting for the buffer I again press pause then press pause again and
the track will begin
Oh and one more thing, it looks like it will advance to the next track
on it's own somewhat ok. It jumps back and fourth between the tracks
when it switches. It seems like it should be crossfading at that time
but instead I get hopping between the last track and the current track
at the same
Thanks for the feedback.
My library is fully analyzed, but I'll try turning analysis off in MMM
and see whether that helps. One thing I wasn't sure of:
tvoil:
Make sure all your music is analyzed in Music Magic before you
integrate it with Slim Server. Once it is it is best to do a wipe cache
Christian Pernegger [EMAIL PROTECTED] writes:
...
The server (as in web interface) has been working fine with my
Japanese tagged tracks since the first 6.0 nightly I tried. It's just
that the display on the sb2 itself shows only ?? for those
songs' tag information.
As I've said before,
It looks great but I am chicken as well.
I'll try it on my work computer I do think the chances are slim.
--
markmun
___
Discuss mailing list
Discuss@lists.slimdevices.com
http://lists.slimdevices.com/lists/listinfo/discuss
It looks great but I am chicken as well.
I'll try it on my work computer I do think the chances are slim.
Speaking of Slim, it does not appear that they are interested in
supporting Rhapsody. I understand they would rather the community
picked up support. But for me it is too important. I
bdillahu [EMAIL PROTECTED] writes:
...
Now for the next step I wish I could figure out how to do... I want to
be able to pick and choose music to download to an iPod or other player
device. They want mp3... fine, I can transcode them, but I really wish
there was a already transcoded link in
How do I do a wipe cache?
in the web browser, server settings-performance
click the Wipe Cache button. With 6.0.1, there have been some issues using wipe
cache, however. If you end up with strange results in the pagebar (the letters
at the top fo the browse lists), a server restart should
Sean -
Is this how it is implemented on SB1 as well as SB2, or is only SB2
implemented this way?
Also, on the systems that are implemented in this fashion, are the
SP/DIF data samples which are sent over TosLink/Coax 24-bit words, or
is it truncated to 16-bits after the volume scaling
kdf Wrote:
How do I do a wipe cache?
in the web browser, server settings-performance
click the Wipe Cache button. With 6.0.1, there have been some issues
using wipe
cache, however. If you end up with strange results in the pagebar (the
letters
at the top fo the browse lists), a server
* hunta shaped the electrons to say...
Okay, I've tried all that and even uninstalled SS 6.01 and replaced it
with the pre-release SS 6.02. Still exactly the same - slim.exe at near
100% if I enable MusicMagic integration. MM itself is doing nothing (CPU
0%, all songs analysed). The only way to
pbrubaker wrote:
I just upgraded to Softsqueeze 2.0b6 and now I have no audio. It looks
like it's playing but there is no audio, the timer does not update and
the spectrum does not display.
Are you by chance using the Primary Sound Driver option in the audio
settings section of the
The new client is pretty slick with some creature comforts.
It does not work with Real Slim. Real Slim does not recognize that
Rhapsody is running.
It does download 160kbps audio files. Mine show up as WMAs but I think
its likely that WMP is my default player for the type it downloads.
You
That could be it. I tried both JLayer and the Java MP3 plugin to no
avail. I'll try changing the sound setting to Java Sound Audio
Engine tomorrow when I get back to work.
Thanks for the tip,
--Pete
--
pbrubaker
___
Discuss mailing list
68 matches
Mail list logo