Philippe,
Many thanks for your good advice, and especially for the list of part
numbers very helpful. I'll start looking for suitable caps after
Xmas, and perhaps try to find Ta or NbO2 types with the same footprints,
as they should last longer than Al electrolytics.
I'll report back when
DanielTheGreat wrote:
> Oh boy, that's going to take some time, sourcing 23 SMD electros that
> are drop-in replacements (physically + electrically) for all those on
> the main SB3 PCA. The two THD caps will be easier. I might hook a 0R1
> non-inductive resistor in series with the external
philippe_44 wrote:
> Some other threads suggest replacing only a few capacitors (@ralphy made
> suggestions). I personally replaced them all on all SB I repaired, at
> the end of the day it's not too long and some are only accessible when
> surroundings ones are removed, so I took the brute
DanielTheGreat wrote:
> Yes, I've tried all the 'usual' suggestions, to no avail. So I'm about
> to start checking the internal power supplies. Pity there's no
> schematic or illustrated guide on where to check these.
>
> Any suggestions about the most likely culprits? I've seen a post
philippe_44 wrote:
> +1 and after that, this requires capacitors to be replaced. I "saved"
> another one last week. Working 100% now
Yes, I've tried all the 'usual' suggestions, to no avail. So I'm about
to start checking the internal power supplies. Pity there's no
schematic or illustrated
bpa wrote:
> Have you tried all the step the OP did ? After PSU check, reseat/remove
> wireless card - 2 most common problems.
+1 and after that, this requires capacitors to be replaced. I "saved"
another one last week. Working 100% now
LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet,
DanielTheGreat wrote:
> Did you ever solve this issue, as one of my SB3's has started doing the
> same thing!
Have you tried all the step the OP did ? After PSU check, reseat/remove
wireless card - 2 most common problems.
Have you tried with a PSU from one of the other SB3s. I would say that
for a behaviour like that, more often than not a failing PSU is the
culprit.
alfista's Profile: http://forums.slimdevices.com/member.php?userid=32396
Did you ever solve this issue, as one of my SB3's has started doing the
same thing!
Regards,
Daniel
(Gerroa, Australia)
DanielTheGreat's Profile: http://forums.slimdevices.com/member.php?userid=13031
View this thread:
HI there.
I'm sure I have seen subjects about this, but my quick search did not
return useful info.
I was given a SD squeezebox 3 (ether/wifi) some time ago and decided to
power it up. It has a fantastic looking VFD screen. Problem, it reboots
or locks up a few seconds after starting to play
10 matches
Mail list logo