net.au<mailto:dog@lists.riverland.net.au>
Subject: Re: [DOG mailing list] procedure for replacement of undercarriage eye
bolts
Some illustration attached...
:-)
Nils
On 07.04.2018 11:29, Nils Beck wrote:
We did this a couple of years ago. You have to cut some openings in the floor
pan, replace
force on in until i can get a good look at it.
Cheers all
Richard
From: dog@lists.riverland.net.au [mailto:dog@lists.riverland.net.au] On Behalf
Of Nils Beck
Sent: Saturday, 7 April 2018 5:39 PM
To: dog@lists.riverland.net.au
Subject: Re: [DOG mailing list] procedure for replacement
The originals are HIRSCHMANN rod ends.
Before you cut a hole in the floor pan, lay up some fibreglass to the right
shape which can then be screwed down afterwards as an inspection hatch.
regards
Rob
Rob Thompson
0429 493 828
(Please note that my new email address is amessageto...@gmail.com)
On
We did this a couple of years ago. You have to cut some openings in the
floor pan, replace the rod ends and then close the cutouts by hand
lay-up (so you have to cut it open again the next time again...).
There is a kind of bulkhead where these rod ends are bolted on, it's all
straightforward
Have you already got access hatches cut out in the fibreglass floor pan?
regards
Rob
Rob Thompson
0429 493 828
(Please note that my new email address is amessageto...@gmail.com)
On Sat, Apr 7, 2018 at 5:52 PM, Ric Sutton wrote:
> Hi guys
>
> Does anyone have a