Potential solution:
If both speakers are in roughly the same place, does it matter which one each
sound is played through? You could just play music though one of them, and do
the bells with whichever speaker isn't already in use.
Hamish
On 14 Jan 2018, at 18:07, Hamish MB
On Sunday, 14 January 2018 18:03:56 GMT you wrote:
> I'll post it on the Raspberry Pi Forum later; have to go to dinner now.
Done.
--
Terry Coles
--
Next meeting: Bournemouth, Tuesday, 2018-01-09 20:00
Meets, Mailing list, IRC, LinkedIn, ... http://dorset.lug.org.uk/
New
Weird that it keeps cutting it off!
I've been having email problems with this mailing list too - I've tried to
reply to people a few times but it doesn't seem to work.
This is sent directly to you as well as the list Terry, so please let me know
if you get this message twice :)
Hamish
On 14
On Sunday, 14 January 2018 18:02:40 GMT you wrote:
> On Sunday, 14 January 2018 17:57:26 GMT Terry Coles wrote:
> Some stuff:
>
> This is weird, I think something is cutting off the information that I have
> been putting at the end of the message. One more time:
I'll post it on the Raspberry Pi
On Sunday, 14 January 2018 17:57:26 GMT Terry Coles wrote:
Some stuff:
This is weird, I think something is cutting off the information that I have
been
putting at the end of the message. One more time:
*terry@OptiPlex*:*~*$ aplay -l
--
Terry Coles
--
Next meeting:
On Sunday, 14 January 2018 17:51:51 GMT Terry Coles wrote:
> On Sunday, 14 January 2018 17:40:14 GMT Andrew wrote:
> > The IDs in lsusb won't help, they are the vendor ID and device ID for
> > that type of card, not that instance in your machine.
>
> They would if I could tie the ID to the hw:
On Sunday, 14 January 2018 17:40:14 GMT Andrew wrote:
> The IDs in lsusb won't help, they are the vendor ID and device ID for
> that type of card, not that instance in your machine.
They would if I could tie the ID to the hw: channel in aplay, because I know
which ID is
plugged into the tower
I've just re-read your forum post and can see your output of 'aplay -l'.
So you have:
Internal (I guess it's internal):
hw:0,0
HDMI 0:
hw:2,3
HDMI 1:
hw:2,7
USB:
hw:3,0
USB:
hw:4,0
It would be nice if the output of aplay -l actually showed these rather
than having the know how to put them
On 14/01/18 17:13, Terry Coles wrote:
I have used both aplay -l and aplay -L, but neither help. Here is a
couple of
segments from the relevant output for the two devices:
sysdefault:CARD=Device
USB PnP Sound Device, USB Audio
Default Audio Device
..
plughw:CARD=Device,DEV=0
On Sunday, 14 January 2018 16:49:17 GMT Andrew wrote:
> Ideally you want a balanced audio output. I would give you a link to the
> USB to XLR audio device I bought many years ago, but I can't seem to
> find them any more! There's lots around with a single input but the one
> I got has two inputs
Hi Terry,
On 14/01/18 11:27, Terry Coles wrote:
Everything in the garden was lovely until the 12 V (Audio Amp) PSU Brick failed
in August
and the replacement turned out to be noisy. There was always a bit of a hum
loop, but it
was acceptable until the extra noisy PSU came along.
Ideally
Hi,
You may remember my queries in November of last year regarding the use of two
USB
Audio Adaptors with a Raspberry Pi; one to play the chimes and one to play the
organ
music inside the Wimborne Model Town Minster. At the time it was suggested
that I could
discriminate between the two
12 matches
Mail list logo
