Hi guys,
For anyone who have this problem it could be related to routing MTU.
In my case I've found that a new router was breaking the mtu so big packet are
fragmented and this cause stalled between the replicas.
Thank you for your time
Paolo
Il 13 luglio 2021 20:39:28 CEST, "Stefan M
cal DC.
Can you give me some hints?
Regards,
Paolo
--
Paolo Daniele
Intendo s.r.l.E-mail: paolo.dani...@intendo.it
Business Unit TLCWEB Tel.: +39 0968 430786
Via Coschi, 11Skype: paolo_daniele1
88046 - Lamezia Terme, Cz Web:ht
and around the Internet, I could find none which add authdb
drivers.
Best Regards,
Riccardo P. Bestetti
Da: Aki Tuomi
Inviato: venerdì 9 agosto 2019 13:56
A: Riccardo Paolo Bestetti ; dovecot@dovecot.org
Oggetto: Re: Auth driver
On 9.8.2019 14.51, Riccardo Paolo Bestetti vi
Greetings!
I'm planning to implement a new auth driver. It's going to be, in concept,
similar to the Lua and CheckPassword drivers, in that it allows an user program
to carry out the authentication and user enumeration steps.
The rationale is that such a solution would provide better decoupling
Il 10/07/19 11:44, Jean-Daniel Dupas ha scritto:
Le 10 juil. 2019 à 10:24, Paolo Daniele via dovecot a
écrit :
Il 10/07/19 10:20, Aki Tuomi ha scritto:
On 12/06/2019 20:02 Paolo Daniele via dovecot wrote:
Hi,
i've a question for you.
I've two dovecot imap/pop serve
Il 10/07/19 10:27, Sami Ketola ha scritto:
On 10 Jul 2019, at 11.24, Paolo Daniele via dovecot wrote:
connections are coming from the ip address of load balancer (also checked with
a netstat -an)
I know that thunderbird has this problem and i haven't problem since the
numbers of
Il 10/07/19 10:27, Aki Tuomi ha scritto:
On 10/07/2019 11:24 Paolo Daniele via dovecot wrote:
Il 10/07/19 10:20, Aki Tuomi ha scritto:
On 12/06/2019 20:02 Paolo Daniele via dovecot wrote:
Hi,
i've a question for you.
I've two dovecot imap/pop server behind
Il 10/07/19 10:20, Aki Tuomi ha scritto:
On 12/06/2019 20:02 Paolo Daniele via dovecot wrote:
Hi,
i've a question for you.
I've two dovecot imap/pop server behind a zen load balancer.
Load balancing is made by lx4nat so the public ip address of my load balancer
contact di
bout that?
Maybe there's some tuning that you can suggest.
Thank you,
Paolo
it too
much. Who ever know all possible use cases in the world?
Cheers
Paolo
are Dovecot and needs some additional
configuration to work through the network (see
https://wiki2.dovecot.org/Replication).
I don't know about imapsync but I suppose it is a generic IMAP tool that
replicates mailboxes using IMAP protocol as a client between two servers.
Cheers
Paolo
or: msgid=<5df93e60-676c-f6bb-68b8-c17fe7493...@address.com>:
failed to store into mailbox
'Cond-UFF_FORNITORI/CONTABILITA/Ricevuta': Mailbox doesn't exist:
Cond-UFF_FORNITORI/CONTABILITA/Ricevuta
Il 04/07/2017 10:34, Stephan Bosch ha scritto:
Op 7/4/2017 om 8:44 AM sch
Il 30/06/2017 10:46, Paolo ha scritto:
Hello,
my dovecot version is 2.1.17
I've configured some public namespaces (config attached). When a mail
arrives at a certain mail address, that mail is handled by dovecot
lmtp server and a sieve script is executed that shuold move the
message i
;. The two mailboxes "Ricevuta"
and "Inviata" does exist. I can see them and read mail in them from my
Thunderbird, but sieve does not view them.
Did someone face similar problem?
Thanks
Paolo
n, sieve documentation,
ACL, filesystem paths, filesystem permissions, etc. etc. I'm pretty sure
it's all right.
So why isn't sieve working?
Thanks if you bother to answer & Cheers
Paolo
# 2.1.17: /etc/dovecot/dovecot.conf
# OS: Linux 2.6.18-419.el5 x86_64 CentOS release
I tried to find a similar tool for Dovecot, but couldn't. Is there such a
thing?
Also tried to hack a little the logwatch plugin, but I am not a per
programmer ...
Thanks, P.
new
Finished ;-)
The new laptop is now exacly as the old (better if TB same version before
migration).
--
Regards,
Paolo
ow if you need some more info or config dump.
Any help will be appreciated
Paolo Rinaldo
Dovecot config:
# 2.1.7: /etc/dovecot/dovecot.conf
# OS: Linux 3.11.0-15-generic x86_64 Ubuntu 12.04.4 LTS
auth_mechanisms = plain login
debug_log_path = /var/log/dovecot/dovecot-debug.log
disable_plaintex
TB online with "just" 10k users. It wouldn't be worth?
Paolo
s that client copied/moved to the
> # special_use=\Trash mailbox.
>
> Any thoughts on what else would be useful?
Number of mails that have been \Seen ?
I have been running Dovecot with full debug logging so I am not aware if the
same information is already available elsewhere in the log at production
loglevel.
Paolo
?
While I am at it, is it possible to configure primary storage as maildir
(sturdy indexes) and altstorage as mdbox (more delicate indexes)?
Thanks,
Paolo
Hello.
Before going into deep testing of 2.2.16 (clean install tbd), I would like
to know if someone is using succesfully both ACL and Lazy_expunge plugins.
Perhaps I had a config error?
Thanks,
Paolo
> Il 3 marzo 2015 alle 16.36 Paolo Cravero ha
> scritto:
>
>
> Hello list.
base/ExtraFields
http://wiki2.dovecot.org/UserDatabase/ExtraFields (+ mail and quota_rule)
Paolo
t from the string, so a
little bit of sed and regex is needed. You also need to work out source and
destination files.
Still, personally I think the problem is somewhere else and should be fixed.
Else, stop using SIS and let the SAN do the deduplication.
Am I wrong?
Paolo
;.EXPUNGED/'
Removing the lazy_expunge, ACLs do work as expected and I can add/remove/use
them.
Is there a known compatibility issue? Or there's something wrong in my
config and someone else is running with both plugins enabled?
Thanks,
Paolo
PS: output of dovecot -n:
# 2.2.15: /etc/
folder, you
may be unable to see the whole folder at all! That's the case with
Open-Xchange.
Again: which tests can be run in order to confirm the behaviour and possibly
a bug?
Paolo Cravero
Daniel
Miller).
I am also interested to hear real life stories.
73
Paolo Cravero
s, so let
yours do the job. Allow Dovecot to lookup the correct DN based on the
attribute you supply (uid) and then authenticate.
This should be achieved if you comment out the auth_bind_userdn line.
Paolo Cravero
veadm purge" on the mailbox in error,
but I am not sure that is the culprit.
Have I hit a bug or done something wrong? Please suggest tests to verify
where I stand.
Config dump follows.
Paolo
# 2.2.15: /etc/dovecot/dovecot.conf
# OS: Linux 2.6.32-431.el6.x86_64 x86_64 Red Hat Enterprise
ks to Timo and others for the great product and the support.
Regards, Paolo
On Mon, 20 Jan 2014, Robert Schetterer wrote:
Am 19.01.2014 22:36, schrieb Paolo:
Is there some simple script that parsing the dovecot.info.log can give
me a list of the mail checks for a user (better if reports also the type
(POP/IMAP), and result of the sessions (Ok/Fail/Error
Is there some simple script that parsing the dovecot.info.log can give me
a list of the mail checks for a user (better if reports also the type
(POP/IMAP), and result of the sessions (Ok/Fail/Error/...))?
Regards, Paolo
only additional interest is authenticating
users like u...@domain.tld / password (maintaining also the
current user.domain / password).
Is it possible and How complex configuring a similar environment?
Only matter of sync /etc/shadow and DB or other problems?
Regards, Paolo
ce to poppassd
or usermin, or ...
--
Regards,
Paolo
s (broken or removed from
bay or all paths down for FC/iscsi)? Can dovecot 1.2 continue with
INDEX=MEMORY as for a disk full?
Sorry for the many questions
Paolo
--
SEMEL (SErvizio di Messaging ELettronico) - AINF, Universita' di Udine
st glibc which (iirc) has inotify.h
on it's own, that is. Not my case till, I guess, Debian Etch moves to
oldstable.
thanks
--
paolo
GPG/PGP id:0x1D5A11A4 - 04FC 8EB9 51A1 5158 1425 BC12 EA57 3382 1D5A 11A4
using linux/inotify.h if avail.
So, what's the point of changing linux/inotify.h to sys/inotify.h if:
1. at best, they're just the same
2. the 1st is a standard path, the 2nd isn't (no pkgs, need to tweak by hand).
--
paolo
On Fri, Nov 02, 2007 at 06:07:35PM +0200, Timo Sirainen wrote:
> On Fri, 2007-11-02 at 14:56 +0100, Paolo wrote:
> > the current code has changed include linux/inotify.h to sys/inotify.h since
> > 2006-01-17, but that won't work with inotify*.h as documented in the wiki.
>
st didn't show such
X-something.
But re-checking now, I realize I must have checked index files too early:
my custom X-something are right there into index.cache.
So I think it might already be smart enough for our purpose :)
thanks
--
paolo
GPG/PGP id:0x1D5A11A4 - 04FC 8EB9 51A1 515
On Fri, Nov 02, 2007 at 02:31:41PM +0200, Timo Sirainen wrote:
> On Fri, 2007-11-02 at 09:56 +0100, Paolo wrote:
> > I'm trying to compile with plugin in subject, but I get this error:
...
> > Is it in 1.1?
>
> Yes. mail-sql was created against many months old v1.1 code
just symlink sys/inotify.h -> linux/inotify.h.
That's on Debian 3.1 (Sarge).
--
paolo
GPG/PGP id:0x1D5A11A4 - 04FC 8EB9 51A1 5158 1425 BC12 EA57 3382 1D5A 11A4
type
make[5]: *** [mail-sql-plugin.lo] Error 1
there's no such mailbox-list-private.h in the whole src tree, though seems it
should be in the sql-plugin tarball.
Is it in 1.1?
thanks
--
paolo
GPG/PGP id:0x1D5A11A4 - 04FC 8EB9 51A1 5158 1425 BC12 EA57 3382 1D5A 11A4
hi,
currently dovecot caches on disk some most common headers. Is it possible to
tweak such headers list via plugins, eg to cache custom X-* headers, or do
I need to hack the actual index/cache src? if so, which are the .c/.h files
to touch?
thanks
--
paolo
GPG/PGP id:0x1D5A11A4 - 04FC
43 matches
Mail list logo