- Original Message -
From: "Jim Shorney"
To:
Sent: Sunday, March 02, 2014 10:40 AM
Subject: Re: [Drakelist] Tweak my Peak
OK, My opinion:
Best practice is to operate at a lever *just below* where
the ALC light starts
to flicker. This gives you the cleanest si
Lane,
The green LED is a function of the ALC. The LED will light on voice peaks
when the ALC kicks in and limits power output of the PA section. This is
typically 110 to 150 watts depending on the band. Your antenna impedance will
also affect when the LED lights. If you looking at anything oth
OK, My opinion:
Best practice is to operate at a lever *just below* where the ALC light starts
to flicker. This gives you the cleanest signal. It's easier to do if you can
use the clipping action of a good RF speech processor, such as the SP-7 or
equivalent, to limit your peaks.
Otherwise it's p
I would adjust the gain so that the LED just flickers on voice peaks.
There's a common modification for the ALC board that changes how the LED
responds and you may not know if that mod is installed or not.
73, K8AC
On 3/2/2014 12:34 PM, lane denune wrote:
OK ; Here's a loaded question f
4 matches
Mail list logo