On Tue, Dec 5, 2017 at 11:10 PM, Maxime Ripard
wrote:
> The display pipeline on the A83T is mainly composed of the mixers and
> TCONs, plus various encoders.
>
> Let's add the first mixer and TCON to the DTSI since the only board I have
> can use only the LVDS
As v3 implementation removes the mode set from the path of HDCP state
change,
IMO that would have been preferred until we have the ville's changes
mentioned by daniel.
Now once again modeset is brought back :(
And have we already thought about holding the modeset lock for 5+ Sec
for HDCP
Looks Good to me.
Reviewed-by: Ramalingam C
-Ram
On Thursday 07 December 2017 05:30 AM, Sean Paul wrote:
In preparation for implementing HDCP in i915, add some HDCP related
register offsets and defines. The dpcd register offsets will go in
drm_dp_helper.h whereas the
Thanks for handling the reauth req from downstream.
you might want to fix the missed single occurance of "//"
On Thursday 07 December 2017 05:30 AM, Sean Paul wrote:
This patch adds HDCP support for DisplayPort connectors by implementing
the intel_hdcp_shim.
Most of this is straightforward
For the series:
Tested-by: Dieter Nützel
on RX580 8GB
with UH, UV, Blender 2.79, smoketest (Vulkan), glmark2 (parallel with
OpenCL (/opt/opencl-example>./run_tests.sh))
Dieter
Am 06.12.2017 17:49, schrieb Lucas Stach:
Hi all,
second try to move the AMDGPU scheduler
On Tue, Dec 5, 2017 at 11:10 PM, Maxime Ripard
wrote:
> The TCON supports the LVDS interface to output to a panel or a bridge.
> Let's add support for it.
>
> Signed-off-by: Maxime Ripard
> ---
> drivers/gpu/drm/sun4i/Makefile
Hi Dave,
Just a regression fixup and several cleanups.
Please kindly let me know if there is any problem.
Thanks,
Inki Dae
The following changes since commit bd3a3a2e92624942a143e485c83e641b2492d828:
Merge tag 'drm-misc-fixes-2017-12-06' of
On Thu, Dec 7, 2017 at 5:59 AM, Rob Herring wrote:
> On Tue, Dec 05, 2017 at 04:10:16PM +0100, Maxime Ripard wrote:
>> The A83T has two video pipelines in parallel that looks quite similar to
>> the other SoCs.
>>
>> The video planes are handled through a controller called the
On Tue, Dec 5, 2017 at 11:10 PM, Maxime Ripard
wrote:
> When we added the regulator support in commit 90c5d7cdae64 ("ARM: dts:
> sun8i: a711: Add regulator support"), we also dropped the PMIC's
> compatible. Since it's not in the PMIC DTSI, unlike most other PMIC
https://bugs.freedesktop.org/show_bug.cgi?id=95306
--- Comment #74 from Kelly Anderson ---
Initial results with 4.15rc2 looks good. In thirty minutes or so of usage no
black screens. with 4.14.4 it would have black screened by now.
Kernel config snippet:
CONFIG_DRM_AMD_DC=y
Sean,
Could you please share the level of functional testing is done on this
code? like with Receiver/Repeaters and port type tested (DP/HDMI/DP over
USB TypeC ?)
Whether Compliance test is attempted on this code?
Thanks
-Ram
On Thursday 07 December 2017 05:30 AM, Sean Paul wrote:
When a CRTC is disabled and we used an internally created framebuffer,
this patch disables the cursor plane and drops the reference that was
introduced when we called drm_internal_framebuffer_create.
Signed-off-by: Gurchetan Singh
---
drivers/gpu/drm/drm_crtc.c | 7
On Tue, Dec 5, 2017 at 11:10 PM, Maxime Ripard
wrote:
> Some clocks and resets supposed to drive the LVDS logic in the display
> engine have been overlooked when the driver was first introduced.
>
> Add those additional resources to the binding, and we'll deal
On Wednesday 06 December 2017 09:56 PM, Sean Paul wrote:
I'd rather keep the property as-is and expose an HDCP version property
alongside it (or perhaps something more elaborate that includes bksv and the
downstream bksvs). The reason I prefer that is it will also cover the 1.2 vs 1.4
On Thursday 07 December 2017 05:30 AM, Sean Paul wrote:
This patch adds HDCP support for HDMI connectors by implementing
the intel_hdcp_shim.
Nothing too special, just a bunch of DDC reads/writes.
Changes in v2:
- Rebased on drm-intel-next
Changes in v3:
- Initialize new worker
Changes in
FYI, we noticed the following commit (built with gcc-7):
commit: 3e6e51217dd14dcda10d4bc9a38b1440e2d42c14 ("lib/rbtree,drm/mm: Add
rbtree_replace_node_cached()")
git://anongit.freedesktop.org/drm-intel topic/core-for-CI
in testcase: trinity
with following parameters:
runtime: 300s
Looks ok to me, Reviewed-by: Chunming Zhou
On 2017年12月07日 00:49, Lucas Stach wrote:
Hi all,
second try to move the AMDGPU scheduler into a common location, this
time rebased onto drm-next-4.16-wip.
I've tested my etnaviv series on top of this and things seem to work
Hi Christian,
I love your patch! Yet something to improve:
[auto build test ERROR on drm/drm-next]
[also build test ERROR on v4.15-rc2 next-20171206]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system]
url:
https://github.com/0day-ci/linux
We recently modified drm_fb_helper_single_add_all_connectors() to allow
NULL "fb_helper" pointers. But the problem is that it gets
dereferenced before we checked for NULL.
Fixes: c777990fb45b ("drm/fb-helper: Handle function NULL argument")
Signed-off-by: Dan Carpenter
Hi Dave,
First feature request for 4.16. Highlights:
- RV and Vega header cleanups
- TTM operation context support
- 48 bit GPUVM fixes for Vega/RV
- More smatch fixes
- ECC support for vega10
- Resizeable BAR support
- Multi-display sync support in DC
- SR-IOV fixes
- Various scheduler
https://bugs.freedesktop.org/show_bug.cgi?id=103769
--- Comment #6 from bartos.p...@gmail.com ---
Yes, the problem is still there, tested with mesa git 9f9177d, llvm git e58aca6
(and clang 9f9177d).
Unfortunately I am unable to provide backtrace with symbols now since I've
upgraded to Fedora 27
Den 29.11.2017 04.01, skrev David Lechner:
This adds a new driver for Sitronix ST7735R display panels.
This has been tested using an Adafruit 1.8" TFT.
Signed-off-by: David Lechner
---
MAINTAINERS | 6 +
drivers/gpu/drm/tinydrm/Kconfig | 10
From: Kuninori Morimoto
In general, PLL has VCO (= Voltage controlled oscillator),
one of the very important electronic feature called as "jitter"
is related to this VCO.
In academic generalism, VCO should be maximum to be more small jitter.
In high frequency
Add a comment to the DRM_PANEL_ORIENTATION_QUIRKS documenting that the
reason for a separate Kconfig for this is because
drm_panel_orientation_quirks.c code is shared with fbdev.
Suggested-by: Bartlomiej Zolnierkiewicz
Reviewed-by: Daniel Vetter
On Tue, Dec 05, 2017 at 12:00:34PM +0100, Hans de Goede wrote:
> Hi All,
>
> This is a resend from my gmail mail address so that patchwork and the CI
> pick this up.
If you mean the intel CI farm, then you need to cc: intel-gfx.
Unfortunately our CI does not (yet) watch what's going on on
On Tue, Dec 05, 2017 at 04:11:26PM -0500, Alex Deucher wrote:
> On Tue, Dec 5, 2017 at 1:24 PM, Noralf Trønnes wrote:
> > The helpers are applied and have reached airlied/drm-next.
> >
> > amd has gained another .poll_changed user since last.
>
> Patches 1, 2, 9 applied to my
https://bugs.freedesktop.org/show_bug.cgi?id=103913
ro...@beardandsandals.co.uk changed:
What|Removed |Added
Status|NEW |RESOLVED
From: Brian Norris
Bridge drivers/helpers shouldn't be clobbering the drvdata, since a
parent driver might need to own this. Instead, let's return our
'dw_mipi_dsi' object and have callers pass that back to us for removal.
Signed-off-by: Brian Norris
We now have a generic dw-mipi-dsi bridge driver.So we send
this patchs to moving rockchip dw-mipi-dsi driver to that
in order to add new features(dual mipi support).
Update ROCKCHIP DSI controller driver that uses the Synopsys
DesignWare MIPI DSI host controller bridge.
ChangeLog:
v2:
add
On Tue, Dec 05, 2017 at 11:46:28AM -0600, Gustavo A. R. Silva wrote:
> fb_helper is being dereferenced before it is null checked,
> hence there is a potential null pointer dereference.
>
> Fix this by moving the pointer dereference after fb_helper
> has been null checked.
>
> This issue was
Add the ROCKCHIP DSI controller driver that uses the Synopsys DesignWare
MIPI DSI host controller bridge.
Signed-off-by: Nickey Yang
Signed-off-by: Brian Norris
Reviewed-by: Brian Norris
Reviewed-by: Sean Paul
We now have a generic dw-mipi-dsi bridge driver.So we send
this patchs to moving rockchip dw-mipi-dsi driver to that
in order to add new features(dual mipi support).
Update ROCKCHIP DSI controller driver that uses the Synopsys
DesignWare MIPI DSI host controller bridge.
ChangeLog:
v2:
add
From: Brian Norris
Bridge drivers/helpers shouldn't be clobbering the drvdata, since a
parent driver might need to own this. Instead, let's return our
'dw_mipi_dsi' object and have callers pass that back to us for removal.
Signed-off-by: Brian Norris
This patch update describe panel/port links, including
unit addresses in documentation of device tree bindings
for the rockchip DSI controller based on the Synopsys
DesignWare MIPI DSI host controller.
Signed-off-by: Nickey Yang
Reviewed-by: Brian Norris
Hi Jose,
On Tue, 2017-12-05 at 10:39 +, Jose Abreu wrote:
> Hi Alexey,
>
> On 04-12-2017 17:29, Alexey Brodkin wrote:
> >
> >
> > Indeed, in case of kmscube etnaviv is a renderer while UDL
> > outputs the picture on the screen.
>
> Thats nice :)
>
> Ok, from your logs I was not able to
Having the filename in the header serves little purpose and is
often wrong after renames as it is here in several places, just
drop it from all omapdrm files.
While we are here unify the copyright tags to the TI recommended style.
Signed-off-by: Andrew F. Davis
---
fb_helper is being dereferenced before it is null checked,
hence there is a potential null pointer dereference.
Fix this by moving the pointer dereference after fb_helper
has been null checked.
This issue was detected with the help of Coccinelle.
Fixes: c777990fb45b ("drm/fb-helper: Handle
On 07.11.2017 23:23, Dmitry Osipenko wrote:
On 07.11.2017 15:28, Mikko Perttunen wrote:
On 05.11.2017 18:46, Dmitry Osipenko wrote:
On 05.11.2017 14:01, Mikko Perttunen wrote:
...
+static int mlock_id_for_class(unsigned int class)
+{
+#if HOST1X_HW >= 6
+switch (class)
+{
+case
Hi Maxime,
Dne torek, 05. december 2017 ob 11:36:18 CET je Maxime Ripard napisal(a):
> Hi,
>
> On Fri, Dec 01, 2017 at 07:05:23AM +0100, Jernej Skrabec wrote:
> > Current DE2 driver is very basic and uses a lot of magic constants since
> > there is no documentation and knowledge about it was
Hello Marek,
On Tue, Dec 5, 2017 at 5:12 PM, Marek Szyprowski
wrote:
> Hi Misha,
>
> On 2017-12-05 15:06, Misha Komarovskiy wrote:
>>
>> On Mon, Nov 27, 2017 at 6:40 AM, Archit Taneja
>> wrote:
>>>
>>> On 11/21/2017 01:19 PM, Marek Szyprowski
On 05.12.2017 16:21, Mikko Perttunen wrote:
> On 07.11.2017 23:23, Dmitry Osipenko wrote:
>> On 07.11.2017 15:28, Mikko Perttunen wrote:
>>> On 05.11.2017 18:46, Dmitry Osipenko wrote:
On 05.11.2017 14:01, Mikko Perttunen wrote:
> ...
>
> +static int mlock_id_for_class(unsigned
Hello,
On Mon, Nov 27, 2017 at 6:40 AM, Archit Taneja wrote:
>
>
> On 11/21/2017 01:19 PM, Marek Szyprowski wrote:
>>
>> get_modes() callback might be called asynchronously from the DRM core and
>> it is not synchronized with bridge_enable(), which sets proper runtime PM
Hi Maxime,
Dne torek, 05. december 2017 ob 16:10:21 CET je Maxime Ripard napisal(a):
> Add support for the A83T display pipeline.
>
> Reviewed-by: Chen-Yu Tsai
> Signed-off-by: Maxime Ripard
> ---
> drivers/gpu/drm/sun4i/sun4i_drv.c | 1 +
>
Hi Ville,
Quoting Ville Syrjälä :
On Mon, Dec 04, 2017 at 03:54:18PM -0600, Gustavo A. R. Silva wrote:
crtc_state is being null checked in a previous code block, which implies
that such pointer might be null.
crtc_state is dereferenced in
Hi Lucas,
On Wed, 2017-11-15 at 18:56 +0100, Lucas Stach wrote:
> Am Mittwoch, den 15.11.2017, 17:36 + schrieb Alexey Brodkin:
[snip]
> I'm not keen on having a private memory region for the GPU. Normally we
> just use the shared system CMA memory region (and we will point the
> linear
Currently, calls into each file are used to register the various
platform drivers. Change this to a table of pointers to platform_driver
structs to allow using platform_register_drivers.
Signed-off-by: Andrew F. Davis
---
drivers/gpu/drm/omapdrm/dss/core.c | 51
Hi Jose,
On Tue, 2017-12-05 at 12:26 +, Jose Abreu wrote:
> On 05-12-2017 11:53, Alexey Brodkin wrote:
> >
> >
> > From my note above about udl_drm_gem_mmap() being only used in case of
> > Xserver
> > I barely may conclude anything. Given my lack of knowledge of DRM guts
> > especially
>
Hi
I noticed 1 typo, 1 bug on this patch.
I will post v2 patch
> From: Kuninori Morimoto
>
> In general, PLL has VCO (= Voltage controlled oscillator),
> one of the very important electronic feature called as "jitter"
> is related to this VCO.
> In academic
Hi All,
This is a resend from my gmail mail address so that patchwork and the CI
pick this up.
Regards,
Hans
___
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Tested-by: Dieter Nützel
Dieter
Am 05.12.2017 13:54, schrieb Christian König:
When we detect consecutive allocation of pages swap them to avoid
accidentally freeing them as huge page.
v2: use swap
v3: check if it's really the first allocated page
v4: don't touch the
Add the ROCKCHIP DSI controller driver that uses the Synopsys DesignWare
MIPI DSI host controller bridge.
Signed-off-by: Nickey Yang
Signed-off-by: Brian Norris
Reviewed-by: Brian Norris
Reviewed-by: Sean Paul
This patch update describe panel/port links, including
unit addresses in documentation of device tree bindings
for the rockchip DSI controller based on the Synopsys
DesignWare MIPI DSI host controller.
Signed-off-by: Nickey Yang
Reviewed-by: Brian Norris
This replaces the etnaviv internal hangcheck logic with the job timeout
handling provided by the DRM scheduler. This simplifies the driver further
and allows to replay jobs after a GPU reset, so only minimal state is lost.
This introduces a user-visible change in that we don't allow jobs to run
Move the fence dependency handling to the scheduler where it belongs.
Jobs with unsignaled dependencies just get to sit in the scheduler queue
without holding any locks.
Signed-off-by: Lucas Stach
---
drivers/gpu/drm/etnaviv/etnaviv_gem.h| 3 ++
Hi all,
this hooks up the AMDGPU/DRM GPU scheduler in etnaviv. This depends on both
the etnaviv job lifetime fixes series, as well as the AMDGPU scheduler move.
Please keep this in mind while reviewing.
The scheduler has 4 main benefits to etnaviv:
1. Cross GPU/device synchronization is handled
https://bugs.freedesktop.org/show_bug.cgi?id=95306
--- Comment #72 from Andrew ---
Created attachment 136007
--> https://bugs.freedesktop.org/attachment.cgi?id=136007=edit
log files with amdgpu.cg_mask set
--
You are receiving this mail because:
You are the assignee for
On 06/12/17 09:22, Guillaume Tucker wrote:
> On 05/12/17 18:32, Ben Skeggs wrote:
>> On Wed, Dec 6, 2017 at 12:30 AM, Jon Hunter wrote:
>>
>>>
>>> On 04/12/17 18:37, Guillaume Tucker wrote:
If the firmware fails to load then ->fini() will be called before the
Hi Dave,
Fixes for 4.15:
- Add licenses to files that were missing it
- huge page fixes for ttm
The following changes since commit 503505bfea19b7d69e2572297e6defa0f9c2404e:
Merge branch 'drm-fixes-4.15' of git://people.freedesktop.org/~agd5f/linux
into drm-fixes (2017-12-01 09:15:57 +1000)
https://bugs.freedesktop.org/show_bug.cgi?id=95306
--- Comment #71 from Andrew ---
adding amdgpu.cg_mask=0xFFFB semed to keep boot messages for a bit longer,
but then again - black screen of beauty :(
adding powerplay) made no difference
--
You are receiving this mail
Always disable and clear interrupts at probe time to ensure that the
TDA998x is in a sane state. This ensures that the interrupt line,
which is also the CEC clock calibration signal, is always deasserted.
Signed-off-by: Russell King
---
The TDA998x is a HDMI transmitter with a TDA9950 CEC engine integrated
onto the same die. Add support for the TDA9950 CEC engine to the
TDA998x driver.
Signed-off-by: Russell King
---
drivers/gpu/drm/i2c/Kconfig | 1 +
drivers/gpu/drm/i2c/tda998x_drv.c | 209
If tda998x_get_audio_ports() fails, and we requested the interrupt, we
fail to free the interrupt before returning failure. Rework the failure
cleanup code and exit paths so that we always clean up properly after an
error, and always propagate the error code.
Signed-off-by: Russell King
min_scale and max_scale in sun8i_vi_layer_atomic_check() can be used
without initialization.
Fix that.
Fixes: b862a648de3b (drm/sun4i: Add support for HW scaling to DE2)
Signed-off-by: Jernej Skrabec
---
drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 3 +++
1 file changed,
This adds a console driver for hd44780 based character lcd displays and
clones. The driver currently supports 20x4 character displays with
character ROMs A00 and A02.
The hardware wirings to the display have to be supplied to the kernel in
the devicetree. The binding doc has the necessary
Hi,
This patch series adds CEC support to the DRM TDA998x driver. The
TDA998x family of devices integrate a TDA9950 CEC at a separate I2C
address from the HDMI encoder.
Implementation of the CEC part is separate to allow independent CEC
implementations, or independent HDMI implementations
We no longer use the CEC client to access the CEC part itself, so we can
move this later in the initialisation sequence.
Signed-off-by: Russell King
---
drivers/gpu/drm/i2c/tda998x_drv.c | 7 ---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git
Add a CEC driver for the TDA9950, which is a stand-alone I2C CEC device,
but is also integrated into HDMI transceivers such as the TDA9989 and
TDA19989.
The TDA9950 contains a command processor which handles retransmissions
and the low level bus protocol. The driver just has to read and write
Move the mutex, waitqueue, timer and detect work initialisation early
in the driver's initialisation, rather than being after we've registered
the CEC device.
Signed-off-by: Russell King
---
drivers/gpu/drm/i2c/tda998x_drv.c | 11 +--
1 file changed, 5
Hi,
Dne torek, 05. december 2017 ob 16:42:55 CET je Jernej Škrabec napisal(a):
> Hi Maxime,
>
> Dne torek, 05. december 2017 ob 16:10:21 CET je Maxime Ripard napisal(a):
> > Add support for the A83T display pipeline.
> >
> > Reviewed-by: Chen-Yu Tsai
> > Signed-off-by: Maxime
Add the optional calibration gpio for integrated TDA9950 CEC support.
This GPIO corresponds with the interrupt from the TDA998x, as the
calibration requires driving the interrupt pin low.
Signed-off-by: Russell King
---
https://bugs.freedesktop.org/show_bug.cgi?id=103791
--- Comment #17 from Michel Dänzer ---
Thanks. I think I see what's happening, but I need some time to think about how
to address it.
Meanwhile, you should be able to re-enable TearFree by forcing a modeset, e.g.
by
On Tue, Dec 5, 2017 at 12:11 PM, C, Ramalingam wrote:
>
>
>
> Best Regards,
> Ramalingam C
>
>> -Original Message-
>> From: Sean Paul [mailto:seanp...@chromium.org]
>> Sent: Tuesday, December 5, 2017 8:07 PM
>> To: C, Ramalingam
>> Cc:
This hooks in the DRM GPU scheduler. No improvement yet, as all the
dependency handling is still done in etnaviv_gem_submit. This just
replaces the actual GPU submit by passing through the scheduler.
Allows to get rid of the retire worker, as this is now driven by the
scheduler.
Signed-off-by:
Populating objects, adding them to the GPU VM and patching/validating
the command stream might take a lot of CPU time. There is no reason to
hold all object reservations during that time.
Signed-off-by: Lucas Stach
---
drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c | 16
https://bugs.freedesktop.org/show_bug.cgi?id=103769
--- Comment #5 from letha...@gmail.com ---
other unity games affected:
candle
silence
grow home
pulse
mousecraft
wasteland 2
broforce
habitat
munin
the last tinker
agatha christie the abc murders
plague inc evolved
pillars of eternity
monochroma
https://bugs.freedesktop.org/show_bug.cgi?id=95306
--- Comment #70 from Andrew ---
this bug/thread looks very simillar to what i ahve been expiriencing once i
tried to move from fglx + fedora 22 to over amdgpu + fedora27.
Please take a look@ the bug i filed :
This moves and renames the AMDGPU scheduler to a common location in DRM
in order to facilitate re-use by other drivers. This is mostly a straight
forward rename with no code changes.
One notable exception is the function to_drm_sched_fence(), which is no
longer a inline header function to avoid
Hi all,
second try to move the AMDGPU scheduler into a common location, this
time rebased onto drm-next-4.16-wip.
I've tested my etnaviv series on top of this and things seem to work
fine. I checked that AMDGPU still builds, but I don't have any means
to actually runtime test this currently, so
This is the only part of the scheduler which must not be called from
different drivers. Move it to module init/exit so it is done a single
time when loading the scheduler.
Signed-off-by: Lucas Stach
---
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 8
https://bugs.freedesktop.org/show_bug.cgi?id=104143
--- Comment #9 from Gert Wollny ---
Patch: https://patchwork.freedesktop.org/patch/192036/
--
You are receiving this mail because:
You are the assignee for the bug.___
https://bugs.freedesktop.org/show_bug.cgi?id=95306
--- Comment #73 from Andrew ---
i also noticed that the grub screen is in high resolution (probably 1024 )
without me specifying any params. Also the boot messages are flying in the high
resolution, until something is loaded
On Wed, Dec 6, 2017 at 6:35 AM, Russell King wrote:
> Add the optional calibration gpio for integrated TDA9950 CEC support.
> This GPIO corresponds with the interrupt from the TDA998x, as the
> calibration requires driving the interrupt pin low.
>
> Signed-off-by:
On Wed, Dec 6, 2017 at 11:49 AM, Lucas Stach wrote:
> Hi all,
>
> second try to move the AMDGPU scheduler into a common location, this
> time rebased onto drm-next-4.16-wip.
>
> I've tested my etnaviv series on top of this and things seem to work
> fine. I checked that
Hi Dave,
drm-misc-fixes-2017-12-06:
Just the connector_iter corner-case regression fix.
Enjoy your time off next week!
Cheers, Daniel
The following changes since commit ae64f9bd1d3621b5e60d7363bc20afb46aede215:
Linux 4.15-rc2 (2017-12-03 11:01:47 -0500)
are available in the Git repository
https://bugs.freedesktop.org/show_bug.cgi?id=104001
--- Comment #4 from mikhail.v.gavri...@gmail.com ---
Created attachment 136012
--> https://bugs.freedesktop.org/attachment.cgi?id=136012=edit
dmesg with 4.15.0-rc2 amd-staging-drm-next
--
You are receiving this mail because:
You are the
Tested with amdgpu libdrm tests and desktop login with glxgears.
Thanks,
Andrey
On 12/06/2017 02:51 PM, Alex Deucher wrote:
On Wed, Dec 6, 2017 at 11:49 AM, Lucas Stach wrote:
Hi all,
second try to move the AMDGPU scheduler into a common location, this
time rebased
On Wed, Dec 06, 2017 at 05:08:19PM +0800, Nickey Yang wrote:
> From: Brian Norris
>
> Bridge drivers/helpers shouldn't be clobbering the drvdata, since a
> parent driver might need to own this. Instead, let's return our
> 'dw_mipi_dsi' object and have callers pass that
On Tue, Dec 05, 2017 at 04:03:55PM +0530, Archit Taneja wrote:
> Add a section that describes dt-bindings for peripherals that support
> MIPI DSI, but have a different bus as the primary control bus. Add an
> example for such peripherals.
>
> Signed-off-by: Archit Taneja
https://bugs.freedesktop.org/show_bug.cgi?id=104142
Bug ID: 104142
Summary: Stack trace in runpm when Tonga card powers down
Product: DRI
Version: XOrg git
Hardware: Other
OS: All
Status: NEW
Severity:
https://bugs.freedesktop.org/show_bug.cgi?id=104143
--- Comment #3 from Gert Wollny ---
Created attachment 136001
--> https://bugs.freedesktop.org/attachment.cgi?id=136001=edit
Version of the piglit that uses interleaved array and fails with sb
--
You are receiving this
https://bugs.freedesktop.org/show_bug.cgi?id=104143
--- Comment #4 from Gert Wollny ---
Created attachment 136002
--> https://bugs.freedesktop.org/attachment.cgi?id=136002=edit
Version of the piglit that passes copy of gl_Position and tests it
--
You are receiving this
https://bugs.freedesktop.org/show_bug.cgi?id=104143
--- Comment #5 from Gert Wollny ---
Created attachment 136003
--> https://bugs.freedesktop.org/attachment.cgi?id=136003=edit
Piglit screen output with R600_DEBUG=nosb of shaders with extra pos parameter
--
You are
On 05/12/17 18:32, Ben Skeggs wrote:
On Wed, Dec 6, 2017 at 12:30 AM, Jon Hunter wrote:
On 04/12/17 18:37, Guillaume Tucker wrote:
If the firmware fails to load then ->fini() will be called before the
device has been initialised, causing the kernel to hang while trying
Add SPDX identifiers to files under stm directory
Signed-off-by: Benjamin Gaignard
---
drivers/gpu/drm/stm/drv.c | 3 +--
drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 3 +--
drivers/gpu/drm/stm/ltdc.c| 3 +--
drivers/gpu/drm/stm/ltdc.h| 3
https://bugs.freedesktop.org/show_bug.cgi?id=104143
Bug ID: 104143
Summary: r600/sb: clobbers gl_Position -> gl_FragCoord
Product: Mesa
Version: git
Hardware: x86-64 (AMD64)
OS: Linux (All)
Status: NEW
Add SPDX identifiers to files under sti directory
Signed-off-by: Benjamin Gaignard
---
drivers/gpu/drm/sti/sti_awg_utils.c| 2 +-
drivers/gpu/drm/sti/sti_awg_utils.h| 2 +-
drivers/gpu/drm/sti/sti_compositor.c | 2 +-
https://bugs.freedesktop.org/show_bug.cgi?id=104143
--- Comment #6 from Gert Wollny ---
Created attachment 136004
--> https://bugs.freedesktop.org/attachment.cgi?id=136004=edit
Piglit output with extra pos parameter and sb enabled
In this image on can see that the
https://bugs.freedesktop.org/show_bug.cgi?id=100200
--- Comment #1 from Gert Wollny ---
This shader uses many arrays, and hence, reserves more registers that the r600
hardware supports.
A work-in-progress patch series that fixes this can be found at
The Video Processing Unit power domain was setup by the Vendor U-Boot,
add support for an optional Power Domain phandle to setup it from the kernel.
Acked-by: Rob Herring
Signed-off-by: Neil Armstrong
---
The VPU init misses these configurations values.
Signed-off-by: Neil Armstrong
---
drivers/gpu/drm/meson/meson_drv.c | 9 +
drivers/gpu/drm/meson/meson_registers.h | 4
2 files changed, 13 insertions(+)
diff --git a/drivers/gpu/drm/meson/meson_drv.c
1 - 100 of 151 matches
Mail list logo