https://bugs.freedesktop.org/show_bug.cgi?id=102358
--- Comment #24 from har...@gmx.de ---
I tested your patch (~20 minutes):
No freezes at all, good work!
I will continue later and meanwhile i'am trying to understand what the meanings
of all that different xx_swap_buffers()
Hi rob,
thanks for you review.
在 2017/9/19 22:46, Rob Herring 写道:
On Thu, Sep 14, 2017 at 11:43:18AM +0800, Sandy Huang wrote:
This path add support rv1108 rgb output interface driver.
Signed-off-by: Sandy Huang
---
.../bindings/display/rockchip/rockchip-rgb.txt
Hi sean,
Thanks for your review.
在 2017/9/20 7:02, Sean Paul 写道:
On Thu, Sep 14, 2017 at 11:43:23AM +0800, Sandy Huang wrote:
Like rockchip rv1108 crtc can directly output parallel and serial
RGB data to panel or conversion chip, so we add this driver to
probe encoder and connector.
https://bugs.freedesktop.org/show_bug.cgi?id=101731
--- Comment #52 from Shmerl ---
(In reply to Samuel Pitoiset from comment #51)
> Guys, can you apply the proposed special hacky patch and try to reproduce
> the hang? It should, at least, partially "fix" the issue in the
On Wed, 2017-09-20 at 05:46 +0800, Zhenyu Wang wrote:
> On 2017.09.19 16:55:34 +0100, Colin King wrote:
> > From: Colin Ian King
> >
> > An earlier fix changed the return type from find_bb_size however the
> > integer return is being assigned to a unsigned int so the
在 2017/9/20 9:51, Sandy Huang 写道:
Hi rob,
thanks for you review.
在 2017/9/19 22:46, Rob Herring 写道:
On Thu, Sep 14, 2017 at 11:43:18AM +0800, Sandy Huang wrote:
This path add support rv1108 rgb output interface driver.
Signed-off-by: Sandy Huang
---
https://bugs.freedesktop.org/show_bug.cgi?id=101731
--- Comment #51 from Samuel Pitoiset ---
Created attachment 134349
--> https://bugs.freedesktop.org/attachment.cgi?id=134349=edit
special varying hack
Guys, can you apply the proposed special hacky patch and try to
Hi Dave,
Here are drm/i915 the fixes for 4.14-rc1.
Couple fixes for stable:
- Fix MIPI panels on BXT.
- Fix PCI BARs information on GVT.
Plus other fixes:
- Fix minimal brightness for BXT, GLK, CFL and CNL.
- Fix compilation warning: unused in_vbl
- Fix error handling in
On Thu, Sep 14, 2017 at 11:43:23AM +0800, Sandy Huang wrote:
> Like rockchip rv1108 crtc can directly output parallel and serial
> RGB data to panel or conversion chip, so we add this driver to
> probe encoder and connector.
>
> Signed-off-by: Sandy Huang
> ---
>
https://bugs.freedesktop.org/show_bug.cgi?id=102885
--- Comment #2 from Thomas J. Moore ---
(In reply to Samuel Pitoiset from comment #1)
> Can you record a trace with apitrace that reproduces the issue?
I could, I guess. I've never used the tool before, though, and have no
On Thu, Sep 14, 2017 at 11:43:28AM +0800, Sandy Huang wrote:
> This patch add serial RGB output interface for rockchip vop, the
> more info about serial RGB output interface described at the
> following file:
>
> Documentation/devicetree/bindings/display/rockchip/rockchip-rgb.txt
>
>
Hi Alex,
First bad commit (maybe != root cause):
tree: git://people.freedesktop.org/~agd5f/linux.git amd-staging-drm-next
head: dcae401d111324489c066aa57ed9c77b97b475f9
commit: dcae401d111324489c066aa57ed9c77b97b475f9 [6/6] drm/amdgpu: fix typo in
si_ih.c
config: i386-allmodconfig (attached
On 18.09.2017 18:19, Sylwester Nawrocki wrote:
> The hdmi-codec interface added in this patch is required to properly
> support HDMI audio. Currently the audio part of the SoC internal
> HDMI transmitter is configured with fixed values, which makes HDMI
> audio working by chance, only on boards
https://bugs.freedesktop.org/show_bug.cgi?id=98520
Jack changed:
What|Removed |Added
Status|NEW |NEEDINFO
--- Comment #39
https://bugs.freedesktop.org/show_bug.cgi?id=101768
Maarten Lankhorst changed:
What|Removed |Added
Assignee|dri-devel@lists.freedesktop
On Mon, Sep 18, 2017 at 05:05:36PM +0800, Nickey Yang wrote:
> As MIPI PHY document show, icpctrl<3..0> and lpfctrl<5..0>
> should depend on frequency,so fix it.
>
> Signed-off-by: Nickey Yang
> ---
> drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 70
>
As part of Treble project in Android O, all the device specific files have
to be located in a separate vendor partition. This is done by setting
LOCAL_PROPRIETARY_MODULE (the name is misleading). This change will not
break existing platforms without a vendor partition as it will just move
files to
On Mon, Sep 18, 2017 at 05:05:34PM +0800, Nickey Yang wrote:
Hi Nickey,
You're adding a substantial new feature to the driver. You should add a commit
message that describes what you're adding, why you're adding it, and how it is
done.
> Signed-off-by: Nickey Yang
>
https://bugs.freedesktop.org/show_bug.cgi?id=102885
Bug ID: 102885
Summary: regression - 17.2 sparkle grid in shadows
Product: Mesa
Version: 17.2
Hardware: x86 (IA32)
OS: Linux (All)
Status: NEW
Severity:
On 2017.09.19 16:55:34 +0100, Colin King wrote:
> From: Colin Ian King
>
> An earlier fix changed the return type from find_bb_size however the
> integer return is being assigned to a unsigned int so the -ve error
> check will never be detected. Make bb_size an int to
https://bugs.freedesktop.org/show_bug.cgi?id=102809
--- Comment #6 from Grazvydas Ignotas ---
There is no 'flashing' on rx470 either on mesa git + llvm r311849 (~month old).
--
You are receiving this mail because:
You are the assignee for the
https://bugs.freedesktop.org/show_bug.cgi?id=102885
--- Comment #1 from Samuel Pitoiset ---
Can you record a trace with apitrace that reproduces the issue?
If not, which games are affected? What Wine version? Is CSMT enabled?
--
You are receiving this mail because:
https://bugs.freedesktop.org/show_bug.cgi?id=102358
--- Comment #25 from Thomas Hellström ---
Comment on attachment 134344
--> https://bugs.freedesktop.org/attachment.cgi?id=134344
Patch to protect the loader_dri3_drawable struct
OK, thanks, that's good to know.
Note
On Tue, Sep 19, 2017 at 11:19:01AM -0700, Brian Norris wrote:
> Hi Sean,
>
> On Tue, Sep 19, 2017 at 11:00:25AM -0700, Sean Paul wrote:
> > On Mon, Sep 18, 2017 at 05:05:33PM +0800, Nickey Yang wrote:
> > > This patch correct Feedback divider setting:
> > > 1、Set Feedback divider [8:5] when
https://bugs.freedesktop.org/show_bug.cgi?id=92248
--- Comment #40 from Armando Antonio ---
The following test cases are failing on CFL with latest configuration
===
Test List
===
On 09/19/2017 10:30 AM, Andrzej Hajda wrote:
On 18.09.2017 18:19, Sylwester Nawrocki wrote:
diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c
b/drivers/gpu/drm/exynos/exynos_hdmi.c
index 214fa5e..dc254b7 100644
--- a/drivers/gpu/drm/exynos/exynos_hdmi.c
+++
Am 19.09.2017 um 13:15 schrieb Tom St Denis:
On 19/09/17 07:13 AM, Christian König wrote:
Am 18.09.2017 um 19:33 schrieb Tom St Denis:
Signed-off-by: Tom St Denis
Mhm, I sometimes have good use for those. But just adding a printk at
the right place does the job as
Am 18.09.2017 um 19:33 schrieb Tom St Denis:
Signed-off-by: Tom St Denis
Reviewed-by: Christian König
(v2): add domains and avoid strcmp
---
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 54 ++---
On 09/19/17 11:35, Sergei Shtylyov wrote:
> On 9/19/2017 12:29 PM, Hans Verkuil wrote:
>
From: Hans Verkuil
Document the cec clock binding.
Signed-off-by: Hans Verkuil
Acked-by: Rob Herring
---
Am 18.09.2017 um 19:33 schrieb Tom St Denis:
Signed-off-by: Tom St Denis
Mhm, I sometimes have good use for those. But just adding a printk at
the right place does the job as well.
So patch is Reviewed-by: Christian König .
Regards,
https://bugs.freedesktop.org/show_bug.cgi?id=102616
Chris Wilson changed:
What|Removed |Added
Status|NEW |RESOLVED
On 09/19/17 12:15, Sergei Shtylyov wrote:
> On 9/19/2017 1:07 PM, Hans Verkuil wrote:
>
>> From: Hans Verkuil
>>
>> Document the cec clock binding.
>>
>> Signed-off-by: Hans Verkuil
>> Acked-by: Rob Herring
Am 18.09.2017 um 19:33 schrieb Tom St Denis:
Signed-off-by: Tom St Denis
(v2): Add domain to iova debugfs
(v3): Add true read/write methods to access system memory of pages
mapped to the device
---
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 104
Am 18.09.2017 um 19:33 schrieb Tom St Denis:
Signed-off-by: Tom St Denis
Reviewed-by: Christian König
---
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 36 +++--
1 file changed, 3 insertions(+), 33 deletions(-)
diff
On 09/19/17 11:20, Sergei Shtylyov wrote:
> Hello!
>
> On 9/19/2017 10:33 AM, Hans Verkuil wrote:
>
>> From: Hans Verkuil
>>
>> Document the cec clock binding.
>>
>> Signed-off-by: Hans Verkuil
>> Acked-by: Rob Herring
>> ---
>>
On 09/19/17 12:42, Sergei Shtylyov wrote:
> On 9/19/2017 1:35 PM, Hans Verkuil wrote:
>
From: Hans Verkuil
Document the cec clock binding.
Signed-off-by: Hans Verkuil
Acked-by: Rob Herring
On 19/09/17 07:13 AM, Christian König wrote:
Am 18.09.2017 um 19:33 schrieb Tom St Denis:
Signed-off-by: Tom St Denis
Mhm, I sometimes have good use for those. But just adding a printk at
the right place does the job as well.
So patch is Reviewed-by: Christian König
On 20 September 2017 at 09:03, Rodrigo Vivi wrote:
> Hi Dave,
Hi Rodrigo,
This pull request is generated wrongly, it contains some commits from
drm-next in it.
Please regenerate it, I'm assuming you generated against 4.14-rc1 and
not against drm-next.
Dave.
Gerd Hoffmann writes:
> On Tue, 2017-09-19 at 11:35 -0300, Gabriel Krisman Bertazi wrote:
>> Gerd Hoffmann writes:
>>
>> > qxl_plane_cleanup_fb() unpins the just activated framebuffer
>> > instead of the old one. Oops. Fix it.
>> >
>> > Cc: Gabriel
tree: git://people.freedesktop.org/~agd5f/linux.git amd-staging-drm-next
head: dcae401d111324489c066aa57ed9c77b97b475f9
commit: 18c073719186a393b41715686cf95175c58919df [1046/1053] drm/amd: Closed
hash table with low overhead
config: i386-allyesconfig (attached as .config)
compiler: gcc-6
On 20 September 2017 at 15:43, Dave Airlie wrote:
> On 20 September 2017 at 09:03, Rodrigo Vivi wrote:
>> Hi Dave,
>
> Hi Rodrigo,
>
> This pull request is generated wrongly, it contains some commits from
> drm-next in it.
Sorry contains some commits
Hi Boris,
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
On 31/08/17 18:55, Boris Brezillon wrote:
> Add a driver for Cadence DPI -> DSI bridge.
>
> This driver only support a subset of Cadence DSI bridge
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
On 19/09/17 16:48, Boris Brezillon wrote:
> On Tue, 19 Sep 2017 16:38:31 +0300
> Tomi Valkeinen wrote:
>
>>
>> Texas Instruments Finland Oy,
Hi all,
The merge window is well over by now - is there anything else I can do
to get this series to a mergeable state? I'm not particularly across the
rules for drm-misc, so please let me know if there are things I need to
be doing.
Regards,
Daniel
Daniel Axtens writes:
>
Support Kingdisplay kd097d04 9.7" 1536x2048 TFT LCD panel,
it is a MIPI DSI panel.
Signed-off-by: Nickey Yang
---
drivers/gpu/drm/panel/Kconfig | 11 +
drivers/gpu/drm/panel/Makefile | 1 +
The KINGDISPLAY KD097D04 is a 9.7" panel with a 1536x2048
resolution and connected to DSI using 8 lanes.
Signed-off-by: Nickey Yang
---
.../display/panel/kingdisplay,kd097d04.txt | 22 ++
1 file changed, 22 insertions(+)
create mode
On Thu, Sep 14, 2017 at 2:01 PM, Marek Szyprowski
wrote:
> Commit 48a92916729b ("drm/exynos: use drm_for_each_connector_iter()")
> replaced unsafe drm_for_each_connector() with drm_for_each_connector_iter()
> and removed surrounding drm_modeset_lock calls. However, that
Configure dsi slave channel when driving a panel
which needs 2 DSI links.
Signed-off-by: Nickey Yang
---
.../devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git
As MIPI PHY document show, icpctrl<3..0> and lpfctrl<5..0>
should depend on frequency,so fix it.
Signed-off-by: Nickey Yang
---
drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 70 +++---
1 file changed, 40 insertions(+), 30 deletions(-)
diff
clk_24m --> Gate11[14] --> clk_mipidphy_ref --> Gate21[0] --> clk_dphy_pll
Signed-off-by: Nickey Yang
---
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
Hi Laurent,
On 15/09/17 17:58, Laurent Pinchart wrote:
> Hi Kieran,
>
> Thank you for the patch.
>
> On Friday, 15 September 2017 19:42:05 EEST Kieran Bingham wrote:
>> DRM pipelines utilising the VSP must stop all frame processing as part
>> of the suspend operation to ensure the hardware is
On 9/19/2017 1:07 PM, Hans Verkuil wrote:
From: Hans Verkuil
Document the cec clock binding.
Signed-off-by: Hans Verkuil
Acked-by: Rob Herring
---
Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt | 4
On Tue, Sep 12, 2017 at 09:34:08AM +0200, Maciej Purski wrote:
> Add HDMI and Sil9234 MHL converter to Trats2 board.
> Following in SoC devices have been enabled:
> - HDMI (HDMI signal encoder),
> - Mixer (video buffer scanout device),
> - I2C_5 bus (used for HDMI DDC)
> - I2C_8 bus (used for
On 9/19/2017 12:29 PM, Hans Verkuil wrote:
From: Hans Verkuil
Document the cec clock binding.
Signed-off-by: Hans Verkuil
Acked-by: Rob Herring
---
Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt | 4
On Mon, Sep 18, 2017 at 11:54:24AM +0900, Hoegeun Kwon wrote:
> The display-timing and delay are included in the panel driver. So it
> should be removed in dts.
>
> Signed-off-by: Hoegeun Kwon
> ---
>
> Hi Krzysztof,
>
> This patch was rebased to the mainline
Hello!
On 9/19/2017 10:33 AM, Hans Verkuil wrote:
From: Hans Verkuil
Document the cec clock binding.
Signed-off-by: Hans Verkuil
Acked-by: Rob Herring
---
Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt |
Signed-off-by: Nickey Yang
---
drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 353
drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 1 +
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 2 +
drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 3 +
This patch correct Feedback divider setting:
1、Set Feedback divider [8:5] when HIGH_PROGRAM_EN
2、Due to the use of a "by 2 pre-scaler," the range of the
feedback multiplication Feedback divider is limited to even
division numbers, and Feedback divider must be greater than
12, less than 1000.
On 9/19/2017 1:35 PM, Hans Verkuil wrote:
From: Hans Verkuil
Document the cec clock binding.
Signed-off-by: Hans Verkuil
Acked-by: Rob Herring
---
Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt | 4
Hi,
On Mon, Sep 18, 2017 at 05:05:35PM +0800, Nickey Yang wrote:
> Configure dsi slave channel when driving a panel
> which needs 2 DSI links.
>
> Signed-off-by: Nickey Yang
> ---
> .../devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt | 2
> ++
>
Hi Nickey,
On Mon, Sep 18, 2017 at 05:05:33PM +0800, Nickey Yang wrote:
> This patch correct Feedback divider setting:
> 1、Set Feedback divider [8:5] when HIGH_PROGRAM_EN
> 2、Due to the use of a "by 2 pre-scaler," the range of the
> feedback multiplication Feedback divider is limited to even
>
This makes poll work for the
/sys/class/drm/cardX/connectorY/dpms attributes.
Tested with i915 suspended by XScreenServer and
suspend to RAM.
Signed-off-by: Karsten Wiese
---
drivers/gpu/drm/drm_atomic.c| 4
drivers/gpu/drm/drm_atomic_helper.c | 6 +-
2
On Tue, Aug 29, 2017 at 07:58:52AM +0200, Krzysztof Kozlowski wrote:
> On Tue, Aug 29, 2017 at 4:52 AM, Hoegeun Kwon
> wrote:
> > Hi Krzysztof,
> >
> > The driver has been merged into exynos-drm-misc.
> > Could you please check this patch(3/3).
>
> Hi, OK, no problems
On 09/19/2017 01:59 PM, Hans Verkuil wrote:
From: Hans Verkuil
Document the cec clock binding.
Signed-off-by: Hans Verkuil
Acked-by: Rob Herring
---
Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt | 4
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
On 19/09/17 16:25, Boris Brezillon wrote:
> On Tue, 19 Sep 2017 15:59:20 +0300
> Tomi Valkeinen wrote:
>
>> Hi Boris,
>>
>>
>> Texas
On Tue, 19 Sep 2017 16:38:31 +0300
Tomi Valkeinen wrote:
>
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>
> On 19/09/17 16:25, Boris Brezillon wrote:
> > On Tue, 19 Sep 2017 15:59:20
On Thu, Sep 14, 2017 at 2:01 PM, Marek Szyprowski
wrote:
> Commit 7d902c05b480 ("drm: Nuke drm_atomic_helper_connector_dpms")
> removed drm_atomic_helper_connector_dpms() helper saying that it was a dead
> code. It was however indirectly used by Exynos DRM driver for
Hi Heiko,
On 2017年09月18日 19:31, Heiko Stübner wrote:
Hi Nickey,
Am Montag, 18. September 2017, 17:05:37 CEST schrieb Nickey Yang:
clk_24m --> Gate11[14] --> clk_mipidphy_ref --> Gate21[0] --> clk_dphy_pll
please try to be a bit more verbose in your commit messages :-) .
It looks to me,
Hi Thierry,
On Wed, Aug 30, 2017 at 11:12 AM, Thierry Reding
wrote:
> On Tue, Aug 29, 2017 at 02:29:08PM -0300, Fabio Estevam wrote:
>> Hi Thierry,
>>
>> On Fri, Aug 18, 2017 at 12:08 PM, Thierry Reding
>> wrote:
>>
>> > I've applied, though
On Tue, 19 Sep 2017 15:59:20 +0300
Tomi Valkeinen wrote:
> Hi Boris,
>
>
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>
> On 31/08/17 18:55, Boris Brezillon wrote:
> > Add a driver
https://bugs.freedesktop.org/show_bug.cgi?id=102372
--- Comment #5 from Mike Lothian ---
Created attachment 134327
--> https://bugs.freedesktop.org/attachment.cgi?id=134327=edit
Xorg.0.log
--
You are receiving this mail because:
You are the assignee for the
https://bugs.freedesktop.org/show_bug.cgi?id=102372
Mike Lothian changed:
What|Removed |Added
Attachment #133715|0 |1
is
From: Hans Verkuil
Document the cec clock binding.
Signed-off-by: Hans Verkuil
Acked-by: Rob Herring
---
Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt | 4
1 file changed, 4 insertions(+)
diff --git
From: Hans Verkuil
Add support for HDMI CEC to the drm adv7511/adv7533 drivers.
The CEC registers that we need to use are identical for both drivers,
but they appear at different offsets in the register map.
Signed-off-by: Hans Verkuil
---
From: Hans Verkuil
I should have posted this a month ago, but I completely forgot about
it. Apologies for that.
This patch series adds CEC support to the drm adv7511/adv7533 drivers.
I have tested this with the Qualcomm Dragonboard C410 (adv7533 based)
and the Renesas
On Mon, 18 Sep 2017, Ville Syrjälä wrote:
> On Mon, Sep 18, 2017 at 09:20:03PM +0300, Jani Nikula wrote:
>> Add drm_kms_helper.edid_firmware module parameter with param ops hooks
>> to set drm.edid_firmware instead, for backwards compatibility.
>>
>> Suggested-by:
On Wed, Sep 13, 2017 at 08:41:53PM +0900, Hoegeun Kwon wrote:
> Exynos 5250 and 5420 have different hardware rotation limits. However,
> currently it uses only one compatible - "exynos5-gsc". Since we have
> to distinguish between these two, we add different compatible.
>
> Signed-off-by: Hoegeun
On Fri, Sep 15, 2017 at 11:11:19AM +0200, Marek Szyprowski wrote:
> Commit 2b7681326dc2 ("drm/exynos: hdmi: remove the i2c drivers and use")
> merged to v3.15 kernel added a required 'ddc' property to Exynos HDMI
> device tree bindings, which should point to i2c bus used for handling DDC
> (mainly
tree: git://people.freedesktop.org/~agd5f/linux.git amd-staging-drm-next
head: dcae401d111324489c066aa57ed9c77b97b475f9
commit: c18d4ac89dc8ad1622c3abc7f4ff31b563c0196b [0/6] drm/amdgpu: Track
pending retry faults in IH and VM (v2)
config: ia64-allyesconfig (attached as .config)
compiler:
https://bugs.freedesktop.org/show_bug.cgi?id=102372
--- Comment #3 from Mike Lothian ---
Thought I'd revert and retest with all the latest code
KMS does work but X doesn't start
--
You are receiving this mail because:
You are the assignee for the
Hi Kieran,
On Monday, 18 September 2017 03:04:13 EEST Kieran Bingham wrote:
> On 15/09/17 17:58, Laurent Pinchart wrote:
> > On Friday, 15 September 2017 19:42:05 EEST Kieran Bingham wrote:
> >> DRM pipelines utilising the VSP must stop all frame processing as part
> >> of the suspend operation
https://bugs.freedesktop.org/show_bug.cgi?id=102796
--- Comment #3 from Tom Englund ---
its fixed with one of the components today.
OpenGL renderer string: AMD VEGA10 (DRM 3.20.0 / 4.12.0-1-amdgpu-zen-4.12, LLVM
6.0.0)
OpenGL core profile version string: 4.5 (Core
Gerd Hoffmann writes:
> qxl_plane_cleanup_fb() unpins the just activated framebuffer
> instead of the old one. Oops. Fix it.
>
> Cc: Gabriel Krisman Bertazi
> Fixes: 1277eed5fecb8830c8cc414ad70c1ef640464bc0
> Signed-off-by: Gerd Hoffmann
https://bugs.freedesktop.org/show_bug.cgi?id=102296
--- Comment #11 from Andy Furniss ---
This seems work OK on current drm-next-4.15-wip, don't know if it's luck or not
yet. Perf is very slightly lower and I haven't been testing every iteration of
new kernels due to testing
https://bugzilla.kernel.org/show_bug.cgi?id=196777
--- Comment #11 from Gerd Hoffmann (kra...@redhat.com) ---
(In reply to Justin M. Forbes from comment #10)
> After going through these with a number of users:
>
> qxl: fix primary surface handling - This patch is widely reported to cause
>
https://bugzilla.kernel.org/show_bug.cgi?id=196777
--- Comment #10 from Justin M. Forbes (jmfor...@linuxtx.org) ---
After going through these with a number of users:
qxl: fix primary surface handling - This patch is widely reported to cause
serious screen flickering that is not there without it,
Hi Hans,
On Tue, Sep 19, 2017 at 9:33 AM, Hans Verkuil wrote:
> From: Hans Verkuil
>
> I should have posted this a month ago, but I completely forgot about
> it. Apologies for that.
>
> This patch series adds CEC support to the drm adv7511/adv7533
On Thu, Sep 14, 2017 at 11:43:18AM +0800, Sandy Huang wrote:
> This path add support rv1108 rgb output interface driver.
>
> Signed-off-by: Sandy Huang
> ---
> .../bindings/display/rockchip/rockchip-rgb.txt | 80
> ++
> 1 file changed, 80
https://bugs.freedesktop.org/show_bug.cgi?id=102809
Alex Deucher changed:
What|Removed |Added
Assignee|mesa-dev@lists.freedesktop.
_BITOPS_LONG_SHIFT seems to be x86-specific. I'll get rid of it.
I'm also looking into a separate problem with 64-bit divisions. I've
reproduced that with a 32-bit build. As I understand it, u64 / u64
should be OK, but for some reason it's doing a signed division
somewhere. I'm trying to track
On Tue, 12 Sep 2017, Jani Nikula wrote:
> Patch 1 is v3 of [1]. There are no functional changes to the previous
> version, just a rebase and a slight refresh of the commit message and
> comments. I think the conclusion from the discussion was that this
> should work just
https://bugs.freedesktop.org/show_bug.cgi?id=102296
--- Comment #12 from Andy Furniss ---
Oops the issue does still exist.
I pasted the wrong command line, which also explains why it was slightly
slower.
--
You are receiving this mail because:
You are the assignee for the
https://bugs.freedesktop.org/show_bug.cgi?id=102296
--- Comment #13 from Andy Furniss ---
Re-reading this I notice I didn't paste the full diff between good and bad so
here's a bit more -
diff good bad though other rings do vary a bit in the second field, ring 12
(VCE?) is
On Tue, 2017-09-19 at 11:35 -0300, Gabriel Krisman Bertazi wrote:
> Gerd Hoffmann writes:
>
> > qxl_plane_cleanup_fb() unpins the just activated framebuffer
> > instead of the old one. Oops. Fix it.
> >
> > Cc: Gabriel Krisman Bertazi
> > Fixes:
From: Colin Ian King
An earlier fix changed the return type from find_bb_size however the
integer return is being assigned to a unsigned int so the -ve error
check will never be detected. Make bb_size an int to fix this.
Detected by CoverityScan CID#1456886 ("Unsigned
https://bugs.freedesktop.org/show_bug.cgi?id=102814
--- Comment #7 from Luke A. Guest ---
(In reply to freedesktop from comment #5)
> It can't be old because Blender 2.79 is brand-new (released last week) and
> Blender 2.78 didn't suffer from this issue.
It is and it did. I
On Fri, Sep 15, 2017 at 11:11:21AM +0200, Marek Szyprowski wrote:
> Commit 2b7681326dc2 ("drm/exynos: hdmi: remove the i2c drivers and use")
> merged to v3.15 kernel added a required 'ddc' property to Exynos HDMI
> device tree bindings, which should point to i2c bus used for handling DDC
> (mainly
On Fri, Sep 15, 2017 at 11:11:23AM +0200, Marek Szyprowski wrote:
> HDMI support requires some additional off-SoC logic, so Mixer device (part
> of HDMI display path) should be disabled by default in SoC dtsi and enabled
> then in each board dts. This patch unifies Mixer handling with other
>
On Fri, Sep 15, 2017 at 11:11:22AM +0200, Marek Szyprowski wrote:
> HDMI support requires some additional off-SoC logic, so HDMI and Mixer
> devices should be disabled by default in SoC dtsi and enabled then
> in each board dts. This patch unifies HDMI and Mixer handling with other
> Exynos SoCs.
On Mon, Sep 18, 2017 at 05:05:33PM +0800, Nickey Yang wrote:
> This patch correct Feedback divider setting:
> 1、Set Feedback divider [8:5] when HIGH_PROGRAM_EN
> 2、Due to the use of a "by 2 pre-scaler," the range of the
> feedback multiplication Feedback divider is limited to even
> division
1 - 100 of 103 matches
Mail list logo