Hello Everyone,
Is there anyone out there that has DSpace harvesting with Library and Archives
Canada in version 1.8.x of DSpace? The configuration has changed and I'm
unable to get it going. Any help would be appreciated.
Jake
--
Jake Cameron, BCS(UNB)
Systems Support Specialist III
Hello Everyone,
I'm at a loss as to why our search dspace search has started defaulting to
www.uleth.ca/searchhttp://www.uleth.ca/search instead of
http://www.uleth.ca/dspace/discover after upgrading from 1.7.1 to 1.83 last
week. It used to go to the right place but since upgrading, I've had
We are trying to add a couple of help links for our graduate students into our
input-forms.xml file. I have been unsuccessful so far in doing this. Does
anyone know how to do this? I have seen one other institutions repository that
can do this.
Jake
--
Jake Cameron, BCS(UNB)
Systems
Does anyone have a working ETD-ms crosswalk for DSpace 3.1 (or 3.0) that works
with Theses Canada for harvesting?
--
Jake Cameron, BCS(UNB)
Systems Support Specialist III
Information Systems and Technical Services University of Lethbridge Library
Phone:(403)329-2756
This e-mail, including any
the sender of the error in communication by return e-mail and destroy all
copies of this e-mail. Thank you.
-Original Message-
From: ivan.ma...@gmail.com [mailto:ivan.ma...@gmail.com] On Behalf Of helix84
Sent: Wednesday, November 21, 2012 12:18 AM
To: Cameron, Jacob
Cc: dspace-tech
.
-Original Message-
From: ivan.ma...@gmail.com [mailto:ivan.ma...@gmail.com] On Behalf Of helix84
Sent: Wednesday, November 21, 2012 8:02 AM
To: Cameron, Jacob
Cc: dspace-tech@lists.sourceforge.net
Subject: Re: [Dspace-tech] IP Restriction to Bitstreams in a collection
On Wed, Nov 21, 2012
copies of this e-mail. Thank you.
-Original Message-
From: ivan.ma...@gmail.com [mailto:ivan.ma...@gmail.com] On Behalf Of helix84
Sent: Tuesday, November 20, 2012 12:52 AM
To: Cameron, Jacob
Cc: dspace-tech@lists.sourceforge.net
Subject: Re: [Dspace-tech] IP Restriction to Bitstreams
Hey everyone,
I recently setup IP authentication for one of our collections. I've been
testing it without much in the line of results though.
What I did was:
1) Create a group, Restricted_Access
2) Edited dspace.cfg with authenticate.ip.Restricted_Access = 142.66, /
142.110.191,
I upgraded TOMCAT from 7.0.11 to 7.0.16 on Friday and this problem
started for us here as well.
We are using 1.7.1, XMLUI/Mirage. We only use the default DSpace login
functionality. IE8 and IE9 both will just take you back to the homepage
without logging you in. I have only changed the look
Has anyone encountered a problem where an item is mapped to a
collection, it shows up in the collection but the item doesn't say it is
mapped to the any other collections if you look at the item metadata.
BUT if you login, edit the item and click on view item, it shows that
the collection is
of the error in communication by
return e-mail and destroy all copies of this e-mail. Thank you.
-Original Message-
From: Cameron, Jacob [mailto:jacob.came...@uleth.ca]
Sent: Wednesday, May 11, 2011 3:55 PM
To: dspace-tech@lists.sourceforge.net
Subject: [Dspace-tech] Handle Server Problem
I can
the sender of the error in communication by
return e-mail and destroy all copies of this e-mail. Thank you.
-Original Message-
From: Evans, Kevin [mailto:kevin.ev...@exeter.ac.uk]
Sent: Thursday, May 12, 2011 8:21 AM
To: Cameron, Jacob; dspace-tech@lists.sourceforge.net
Subject: RE: [Dspace-tech
I can not get our handle server to run on Windows 7. I am getting the
following error (found in the handle-server directory error.txt file).
Any help would be appreciated.
2011/05/11 10:26:15 MDT 25 Started new run.
Saving global values to: C:\Users\dspace\.handle\root_info
Saving global values
I implemented Conal Tuhoy's breadcrumb script on our 1.7.1 DSpace
instance but it crashes. When I turn Mirage off it works fine. I'm
getting an error about resource://aspects/Trail/ when Mirage is on.
Shouldn't I be able to implement this XSLT aspect on top of Mirage?
--
Jake Cameron, BCS(UNB)
Hello All,
I get the following information after upgrading from DSpace 1.4.1 to 1.7 on our
Windows 7 test box (we are migrating from RHEL4 to Windows 7). I followed all
of the steps, I haven't put in our customizations yet, but I am getting a
bitstream error when I try to look at items in
: Brian Freels-Stendel [mailto:bfre...@unm.edu]
Sent: Tuesday, March 22, 2011 10:31 AM
To: dspace-tech@lists.sourceforge.net; Cameron, Jacob
Subject: Re: [Dspace-tech] Bitstream Error after upgrading to 1.7
Hi Jacob,
Make sure you were able to copy over the entire assetstore directory
from your
Our handle server has stopped responding.
I've killed and restarted the process several times and had it working
again this morning. But it has died again this afternoon and I'm unable
to resurrect it. We just renewed our handle server so I know it's not
shutdown. I have even tried
I've been getting this error quite a bit. I've read back through the
listserv and have tried a few fixes, such as checking permissions and
such and they are all correct. Not sure where to proceed from here.
Date: 09/09/08 1:21 PM
Session ID: F6A7732E46BBAFA127FD87FBC5D5840F
-- URL Was:
I've configured the stats package. But every time I try to run the
package, I get an error
Failed to read input file
It's pointing to the proper log folder. I've checked and re-checked
everything and it all looks right to me. Any suggestions?
Jake
--
Jake Cameron, BCSc(UNB)
Technical
Hi Mark,
As you can see, stat-initial runs fine. All the files are owned by the
user dspace and I'm running the stat jobs as dspace as well.
My log files are located in /data/dspace/log and I've set that up as the
directory in dstat.cfg to pull the information from.
[xxx bin]$
-
From: Blanco, Jose [mailto:[EMAIL PROTECTED]
Sent: Friday, November 30, 2007 8:19 AM
To: Claudia Juergen; Cameron, Jacob
Cc: dspace-tech@lists.sourceforge.net
Subject: RE: [Dspace-tech] Advance search oddity
When I make a change to the Message.properties file I change the one in
[dspace]/config
I've made the proper edits to [dspace-source]/config/dspace.cfg
search.index.13 = type:dc.type
And all of the changes to [dspace-source]/jsp/local/search/advanced.jsp
select name=field1 id=tfield1
option value=type %= field1.equals(type) ?
selected=fmt:message
Hi Shane,
It sounds like a problem we’re having here were DSpace is causing some
characters to become encoded ( %3A = : ), so your URL is becoming
http%3A//creativecommons.org/licenses/by-nc-nd/3.0 instead of HYPERLINK
Is it possible to turn off the escape characters for %, ( and ) in the
advanced search? It is causing us some problems and I've not been able
to find a way to prevent this.
It is causing my URL's to get %25's in them, which is resulting in all
of our searches ending with no results.
Jake
--
Hey everyone,
Has anyone ever used a java script to auto focus on the email address
field on login-form.jsp? I've included the java script, but it doesn't
appear to be working.
e.g. script language=JavaScript
type=text/javascriptdocument.application.tlogin_email.focus();/scrip
t
Jake
--
Jake
PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Cameron,
Jacob
Sent: Friday, July 06, 2007 2:20 PM
To: dspace-tech@lists.sourceforge.net
Subject: [Dspace-tech] Auto Focus Script for Login
Hey everyone,
Has anyone ever used a java script to auto focus on the email address
field on login-form.jsp
Hi all,
I know what this error means, but I don't know why I am getting it. The
file works fine, it is completely there, but when I run filter-media it
finds an error here.
ERROR filtering, skipping bitstream #452
java.lang.ArrayIndexOutOfBoundsException: 4
Any ideas or is it something that
: [Dspace-tech] Moving postgres database
On Wed, May 02, 2007 at 11:15:55AM -0600, Cameron, Jacob wrote:
Rather than totally mess up what I have, I figured it'd be quicker to
ask here. I have to move my postgres database for DSpace to another
data disk and I don't want to lose the data. Can
Hi all,
2 quick questions.
1) Where do I change the timeout time in DSpace? We want to adjust it
so you don't logout for 30 minutes.
2) How come every time a new dspace.log file gets created, it is made
under root instead of my dspace user, I did the whole install as my
dspace user.
Jake
--
: (403) 329-2756
Office: L1110C
Email: [EMAIL PROTECTED]
-Original Message-
From: Stuart Lewis [sdl] [mailto:[EMAIL PROTECTED]
Sent: Monday, March 26, 2007 9:01 AM
To: Cameron, Jacob; dspace-tech@lists.sourceforge.net
Subject: RE: [Dspace-tech] Lucene error
Hi Jacob,
Have you been able
Is media filter able to pull any text out of the straight image-based
PDF's (like the ones Library and Archives Canada returns to people)?
Most of these pdfs were taken from microfilm from LAC and I have a
sneaking suspicion that the answer will probably be no.
Jake
--
Jake Cameron, BCSc(UNB)
]
-Original Message-
From: Claudia Jürgen [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 20, 2007 7:24 AM
To: Cameron, Jacob
Subject: Re: [Dspace-tech] Changing headers
Hi Jacob,
please do use the mailing lists for DSpace related questions, as
anything else is lost to the DSpace community
Hi Everyone,
Can anyone give me any help setting up DSpace using only Tomcat? I have
Tomcat up and running and PostgreSQL installed and running. I just need
a few pointers on getting the rest working. We don't want to do it with
Apache.
Jake
--
Jake Cameron, BCSc(UNB)
Technical Specialist
33 matches
Mail list logo
