On May 25, 2010, at 9:34 AM, w0rmt wrote:
Greetings all-
This morning I noticed an issue with the ID800H in my truck. When
transmitting on high power (into port B of W0CDS), the unit cuts out and
gives four long beeps. I initially thought it was a high SWR safety feature,
but when
Greetings all-
This morning I noticed an issue with the ID800H in my truck. When transmitting
on high power (into port B of W0CDS), the unit cuts out and gives four long
beeps. I initially thought it was a high SWR safety feature, but when
transmitting on high on other frequencies near this
Of w0rmt
Sent: Tuesday, May 25, 2010 11:35 AM
To: dstar_digital@yahoogroups.com
Subject: [DSTAR_DIGITAL] ID800 High power DV transmit issue
Greetings all-
This morning I noticed an issue with the ID800H in my truck. When transmitting
on high power (into port B of W0CDS), the unit cuts out
Hi
Sounds like a very similar thing that happened with my ID-80 HT. It
was because external DC voltage supplied was a bit high and adjusting
it to 13.5 fixed the problem.
JI1BQW
Kay
On 2010/05/26, at 0:34, w0rmt w0...@arrl.net wrote:
Greetings all-
This morning I noticed an issue with
I had this identical problem, a few times. I was using my ID-800 as a base
station. I was transmitting on 441.0 MHz and heard the beeps and the radio
stopped transmitting. Never happened on any other frequency. I mentioned it
to one of the Icom Tech. guys. He had no comments. I dunno...
Buddy
I suspect a weak power supply or resistive fuse - does the voltage sag
noticeably under load ? steve
On Tue, May 25, 2010 at 10:34 AM, w0rmt w0...@arrl.net wrote:
Greetings all-
This morning I noticed an issue with the ID800H in my truck. When
transmitting on high power (into port B of