Just got a new Kenwood TS 590 and liking it very much. Can't get DX4WIN to
see it.. Have tried all Kenwood selections and baud rates but no luck..
Know cables, etc work as have it working fine with Write Log.
Any help appreciated... Running DX4WIN 7.02
Thanks Mike
___
no I have not made any changes to any files.
On 2/4/2011 6:38 PM, Bud Semon N7CW wrote:
> Kirk,
>
> Have you ever made any changes to the rig control files? I changed the baud
> rate in the rig control file (in 8.04) and when I updated to 8.05, I didn't
> copy the new rig control file, so the rad
One other item of note.
It is not reading the mode correct either.
KK
On 2/4/2011 6:55 PM, N0KK,Kirk wrote:
> My preferences under the radio tab are as follows. (It is what they have
> been for years)
>
> Type: ICOM 756 PRO III
> Address: 6E
> Baud: 9600
> Both the "default" boxes are checked. Tho
My preferences under the radio tab are as follows. (It is what they have
been for years)
Type: ICOM 756 PRO III
Address: 6E
Baud: 9600
Both the "default" boxes are checked. Though this has no effect on operation
Com port settings are correct. Radio 1 is com 3, radio 2 is com 7.
Poll rate is curre
Would help if you mentioned the radio. All drivers are not the same.
On 2011-02-04 19:28, N0KK,Kirk wrote:
> I upgrade to 8.04 I also switched PC's.
>
> Pulled all ini files etc to new PC all is working well...rotor controls,
> internet etc. Where I'm running into conflict is in the radio control
Hi Jim.
The updates never overwrite the previous version.
Jim, AD1C, has the procedure explained here:
http://dx4win.ad1c.us/appnotes/upgrade.htm
Took me about 5 minutes. Only outstanding issues were to relocate the
main and logging window and setup the map options again.
On 2011-02-04 17:15,
Kirk,
Check your radio settings in Preferences. For whatever reason, importing
a previously saved ini file does NOT set these settings. They're all
"default" - even after an import.
Steve
In a message dated 2/4/2011 6:29:01 P.M. Central Standard Time,
n...@usfamily.net writes:
I u
Kirk,
Have you ever made any changes to the rig control files? I changed the baud
rate in the rig control file (in 8.04) and when I updated to 8.05, I didn't
copy the new rig control file, so the radio didn't work. Good luck.
73, Bud N7CW
-Original Message-
From: dx4win-boun...@mail
I upgrade to 8.04 I also switched PC's.
Pulled all ini files etc to new PC all is working well...rotor controls,
internet etc. Where I'm running into conflict is in the radio control.
Let me preface this by saying the rig control is working as it should in
all other programs I use. Writelog, M
For Guy, ON4AOI and others:
I have downloaded DX4WIN 8.05 from Guy's website. I could not get it from
the DX4WIN website. Is there a reason for this, such as still being in Beta
testing?
I have found that 8.05 does not overwrite the existing DX4WIN as other
updates did. Is there a reason for t
My 8.04 version has worked with NO problems.until today.
I had a crash in my PC and then when trying to open the COUNTRY window, this
message came along:
ERROR
An exception occurred
Fixed column count must be less than column count
Also I have all spots in grey colour..is this due to pro
Steve you can open a separate mmtty window outside dx4win.
I have installed another mmtty copy named mmttyrightchannel.
So i have chosen the right shannel there and when i open this mmtty, it
decodes the right channel. It is not needed to have it running isnide
dx4win. Just arrange dx4win windows
How can you tell if the new Unzip utility is working? I installed it and
reran the Update utility. Everything worked, but can't tell if the Unzip
utility worked.
Dave, N4QS
- Original Message -
From: "Wayne"
To: "Jim Reisert AD1C" ; "DX4WIN"
Sent: Thursday, February 03, 2011 1:08
Is it possible to (somehow?) open a 2nd MMTTY window with DX4WIN, such that
the B-VFO can be used to simultaneously monitor another frequency (think:
split frequency working on RTTY).
Using 8.04, FTDX5000MP & microHAM MK2R+
Thanks
Steve
GW4BLE
Just upgraded my CTY files with the latest Feruary 2011 version. But I still
didn't have the contact status with 7Z1SJ call as Worked (in Summary Report)
nor in DXCC Listing. the "L" (=Labelled) mark appears in HZ listing.
Using v 8.04.
Please help. Tnx es 73 de Jo, YC0LOW
___
15 matches
Mail list logo
