[Dx4win] DX4Win and FT1000MP
Hello, I am just configuring my DX4Win software to connect to the radio and TNC modem. Could someone tell me which parameters should be used in a case of FT1000MP? I know the baud rate should be 4800, and the COM field is also correct. However, the radio does not work. What about the 'address field at 'File/preferences/radio'? Hopre for your help. yl Wanda SP7IWA
[Dx4win] DX4Win and FT1000MP
Hi Wanda, Mine is setup like this... Type: Yaesu FT1000MP Address: 00 Baudrate: 4800 Both default boxes are checked COM Port: COM1 Poll rate: 500 ms MAX: 5 DTR High is checked RTS High is NOT checked Hope this helps. 73 - Ted - W8TTS Wanda_Jak wrote: Hello, I am just configuring my DX4Win software to connect to the radio and TNC modem. Could someone tell me which parameters should be used in a case of FT1000MP? I know the baud rate should be 4800, and the COM field is also correct. However, the radio does not work. What about the 'address field at 'File/preferences/radio'? Hopre for your help. yl Wanda SP7IWA ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win This message has been processed by Firetrust Benign. From [EMAIL PROTECTED] Wed Nov 24 06:35:22 2004 From: [EMAIL PROTECTED] (ARS NZ3O (Byron) FM29fx) Date: Wed Nov 24 06:41:45 2004 Subject: [Dx4win] Re: DX4WIN and Linux In-Reply-To: [EMAIL PROTECTED] References: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Not sure why you feel it is off-topic here, Philippe, but I'd love to hear if you have any success. If I could get WRITElog and DX4WIN running on LINUX I would retire these WIN machines in 72 hours. 73, Byron At 04:01 AM 11/24/2004, Philippe wrote: I tried last year with Fedora Core 1 and Wine. Dx4Win 6.03 is apparently checking I/O at start and then issue an error and quit. I remember having tried older versions without this behavior but was not successful even if it loads OK (don't remember excaly why but probably beacause of fonts display, but not sure :-) I completely switched to Linux last year and I still keep a Windows machine only for Dx4Win. I will try again probably with Fedora Core 3 and again Wine and maybe also QEmu but I don't know when (FYI : I 'm trying only with Open Source emulators, no Win4Lin, VMWare, ...) If and when I will have positive results I will surely post on the list. I'm still dreaming about a Dx4Win Linux version ;-) As this is mostly off topic here, I will not post anymore about Linux, only via private mail.
[Dx4win] Re: DX4WIN and Linux
Not sure why you feel it is off-topic here, Philippe, but I'd love to hear if you have any success. If I could get WRITElog and DX4WIN running on LINUX I would retire these WIN machines in 72 hours. Amen! Add me to the list of Linux-interested parties! - John, WA9ALS, only stuck in Windows for a few ham apps!
[Dx4win] DX4Win and FT1000MP
I have my Yaesu FT-1000MP MKV and DX4win set up the same way; however, I'm using a USB to RS232 adapter. Everything works fine but slow. When I did use the one (1) com port I do have on my computer instead of the adapter response was much, much faster. 73, John, KC9JS Twin Lakes, Wisconsin -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ted Sarah - W8TTS Sent: Wednesday, November 24, 2004 5:33 AM To: Wanda_Jak Cc: Dx4win@mailman.qth.net Subject: Re: [Dx4win] DX4Win and FT1000MP Hi Wanda, Mine is setup like this... Type: Yaesu FT1000MP Address: 00 Baudrate: 4800 Both default boxes are checked COM Port: COM1 Poll rate: 500 ms MAX: 5 DTR High is checked RTS High is NOT checked Hope this helps. 73 - Ted - W8TTS Wanda_Jak wrote: Hello, I am just configuring my DX4Win software to connect to the radio and TNC modem. Could someone tell me which parameters should be used in a case of FT1000MP? I know the baud rate should be 4800, and the COM field is also correct. However, the radio does not work. What about the 'address field at 'File/preferences/radio'? Hopre for your help. yl Wanda SP7IWA ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win This message has been processed by Firetrust Benign. ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] DX4Win and FT1000MP
That's one of the reasons that my new computer was built with multiple com ports and usb ports. 73 - Ted - W8TTS John, KC9JS wrote: I have my Yaesu FT-1000MP MKV and DX4win set up the same way; however, I'm using a USB to RS232 adapter. Everything works fine but slow. When I did use the one (1) com port I do have on my computer instead of the adapter response was much, much faster. 73, John, KC9JS Twin Lakes, Wisconsin -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ted Sarah - W8TTS Sent: Wednesday, November 24, 2004 5:33 AM To: Wanda_Jak Cc: Dx4win@mailman.qth.net Subject: Re: [Dx4win] DX4Win and FT1000MP Hi Wanda, Mine is setup like this... Type: Yaesu FT1000MP Address: 00 Baudrate: 4800 Both default boxes are checked COM Port: COM1 Poll rate: 500 ms MAX: 5 DTR High is checked RTS High is NOT checked Hope this helps. 73 - Ted - W8TTS Wanda_Jak wrote: Hello, I am just configuring my DX4Win software to connect to the radio and TNC modem. Could someone tell me which parameters should be used in a case of FT1000MP? I know the baud rate should be 4800, and the COM field is also correct. However, the radio does not work. What about the 'address field at 'File/preferences/radio'? Hopre for your help. yl Wanda SP7IWA ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win This message has been processed by Firetrust Benign. ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win This message has been processed by Firetrust Benign. From [EMAIL PROTECTED] Wed Nov 24 10:06:36 2004 From: [EMAIL PROTECTED] (Bud Governale) Date: Wed Nov 24 10:13:03 2004 Subject: [Dx4win] QSL Manager Addresses Message-ID: [EMAIL PROTECTED] I lost all QSL manager addresses after updating to release 9 of DX4WIN country files. I followed the procedure for exporting/importing QSL manager data and all QSL managers were successfully preserved but are blank for addresses. How can I get them back so that I can print out labels for stored up unsent QSL's and preserve known good addresses? I suspect a missing step in the Country File update procedure is to also export/save/import QSL manager addresses. 73, Bud W3LL [EMAIL PROTECTED]
[Dx4win] Linking to DXTELNET
I am setting up a new computer and I cannot find my information about how to link DX4WIN and DXTELNET. Any help appreciated. Thanks and 73 de Joe, W6RLL
[Dx4win] Config 2 monitors??
Mostly likely this question pulls ...further...away from DX4WIN; but: Two separate monitors for those app's; that sounds really neat. Ok; using a second graphics card and monitor; how would I configure this, in my case, under Win2000?? Mike Bragassa, K5UO Message: 5 Date: Tue, 23 Nov 2004 16:39:27 -0600 From: L. Sica [EMAIL PROTECTED] Subject: Re: [Dx4win] Integration with DX Atlas To: dx4win@mailman.qth.net Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; charset=iso-8859-1 I wonder if Paul has considered the possibility of designing hooks into DX4WIN so that it can integrate with VE3NEA's DXAtlas, Ionoscope and Band Master (www.dxatlas.com)? This one has been on my gee-whiz-maybe-someday wish list for a while, too there may ...be problems with screen real estate 2nd video card costs $10, and people are GIVING 14 monitors away. I run VE3NEA's Hamscope and DXAtlas on the 2nd screen, with DX4Win taking up all the screen-estate on the first one. Works very well. It'd be even better if they worked automatically with each other (prefix lookup on the DXAtlas map using DXAtlas's superb lookup, and even rotator control...)
[Dx4win] Linking to DXTELNET
I am setting up a new computer and I cannot find my information about how to link DX4WIN and DXTELNET. Any help appreciated. Thanks and 73 de Joe, W6RLL
[Dx4win] Config 2 monitors??
Mike, I did this with my computer, I use windows XP, so I guess (??) it aint far off with Win2000? It involved installing a second video card. Then after it has been installed if you go to control panel, check under displays you will see that windows has configured two monitors. You can then select which is right or left hand monitor ( or top and bottom). Its really good when used, I have all the amateur radio icons on the right screen and all the normal (non radio) icons on the left screen. When you open the software you can then decide which window (or windows) you want on which screen, windows will remember their position (you have to check a box in control panel) and each time you switch on the software, the windows are installed on the correct monitor. You can make it 3 monitors if you want! My new video card had two video outputs, so combined with the one already on the computer makes 3. However you need a lot of desk space! Good luck, its easy to do, cheap and great results! 73's de Tony G8DQZ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Bragassa Sent: 24 November 2004 15:44 To: dx4win@mailman.qth.net Subject: [Dx4win] Config 2 monitors?? Mostly likely this question pulls ...further...away from DX4WIN; but: Two separate monitors for those app's; that sounds really neat. Ok; using a second graphics card and monitor; how would I configure this, in my case, under Win2000?? Mike Bragassa, K5UO Message: 5 Date: Tue, 23 Nov 2004 16:39:27 -0600 From: L. Sica [EMAIL PROTECTED] Subject: Re: [Dx4win] Integration with DX Atlas To: dx4win@mailman.qth.net Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; charset=iso-8859-1 I wonder if Paul has considered the possibility of designing hooks into DX4WIN so that it can integrate with VE3NEA's DXAtlas, Ionoscope and Band Master (www.dxatlas.com)? This one has been on my gee-whiz-maybe-someday wish list for a while, too there may ...be problems with screen real estate 2nd video card costs $10, and people are GIVING 14 monitors away. I run VE3NEA's Hamscope and DXAtlas on the 2nd screen, with DX4Win taking up all the screen-estate on the first one. Works very well. It'd be even better if they worked automatically with each other (prefix lookup on the DXAtlas map using DXAtlas's superb lookup, and even rotator control...) ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Linking to DXTELNET
Joe, When you installed DXTELNET it created a sub-directory called DXT4WIN. The instructions are there. 73, Alan N5NA Joe Young wrote: I am setting up a new computer and I cannot find my information about how to link DX4WIN and DXTELNET. Any help appreciated. Thanks and 73 de Joe, W6RLL ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win From [EMAIL PROTECTED] Wed Nov 24 11:36:48 2004 From: [EMAIL PROTECTED] (Joe - =?iso-8859-1?Q?WD=D8M?=) Date: Wed Nov 24 11:43:46 2004 Subject: [Dx4win] External database verses qrz.com on the internet. In-Reply-To: [EMAIL PROTECTED] References: [EMAIL PROTECTED] [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] A, but if you take a look at Logger 32, a freeware logging program, you'll see that it automatically looks up a callsign on the internet through QRZ.com and places it in your logging fields - automatically - no intervention required other than entering the callsign. Magic. Wish that would happen in DX4WIN. No CDROM, no steps required - just enter the callsignand it's free. 73, Joe WD?M At 12:39 PM 11/23/2004, Jim Reisert AD1C wrote: --- Jerry Dorsky [EMAIL PROTECTED] wrote: I am a newbie to DX4win. Could someone please tell me if there is an advantage to using an external database cd rom over qrz.com on the internet to pull up names and addresses? 1. The CDROM data is better integrated into DX4WIN. Using QRZ.COM takes too lookups vs one. 2. If the Internet is down, you're stuck! 3. By buying the data, you support the people who maintain it. 4. If you have the disk space, copy the CDROM data to your hard drive, and lookups will be FAST. You can open the F3 window and step from QSO to QSO and the data is updated instantaneously. 73 - Jim AD1C = Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.com ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] DX4Win and FT1000MP
Thanks to everybody who answered. My connection does not work yet, but w'll see soon. Something in my computer have to be configured in a wrong way. Best 73/88 yl Wanda SP7IWA
[Dx4win] Re: DX4WIN and Linux
I've got Windows only for DX4WIN and other little things. I've migrated quite all to Linux Box but... Why don't make a DX4LIN version? How do you thik about it, Paul? 73s de Leo, IZ5FSA PS: DX4LIN don't necessary mean for free, isn't it? - Original Message - From: John Fleming [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Wednesday, November 24, 2004 1:03 PM Subject: Re: [Dx4win] Re: DX4WIN and Linux Not sure why you feel it is off-topic here, Philippe, but I'd love to hear if you have any success. If I could get WRITElog and DX4WIN running on LINUX I would retire these WIN machines in 72 hours. Amen! Add me to the list of Linux-interested parties! - John, WA9ALS, only stuck in Windows for a few ham apps! ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Post-5BDXCC submissions
I have hundreds of confirmed QSOs to submit to the DXCC desk, some of which comprise a 30 meter DXCC and the rest are just for the Challenge. Never thought about the mechanics of how to prepare the submission list with DX4WIN, so am asking for your ideas. It appears that the best thing to do is to manually set the group field to the same new value for all the QSOs to be submitted, then produce a custom report based on that. Is there a better way to handle this? 73, Floyd - K8AC
[Dx4win] Linking to DXTELNET
I am setting up a new computer and I cannot find my information about how to link DX4WIN and DXTELNET. Any help appreciated. Thanks and 73 de Joe, W6RLL http://www.qsl.net/wa9als/dxtelnet.htm
[Dx4win] DX4Win and FT1000MP
Be absolutely certain that you have the CORRECT serial cable connecting your computer to the FT1000MP. I do not have the manual here since I moved, but it is a non-standard cable. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wanda_Jak Sent: Wednesday, November 24, 2004 10:45 AM To: Dx4win@mailman.qth.net Subject: Re: [Dx4win] DX4Win and FT1000MP Thanks to everybody who answered. My connection does not work yet, but w'll see soon. Something in my computer have to be configured in a wrong way. Best 73/88 yl Wanda SP7IWA ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
