[Dx4win] DX4WIN8-MAS2 files
Hi All, I updated my webpage with different MAS2 files. I made a few that I think are good starters for the moment. Don´t ask me to make more or tell me that there are a few calls Missing because everyday these listings grow... After everybody has read the manual about how to create there Own Specific members list they will be removed from my page And replaced with listings that can be used to create your own. Users that have member-lists (preferable in standard TXT format) That can be used by ALL DX4WIN USERS can always send them to me. Available MAS2 files LoTW members only LoTW eQSL members LoTW eQSL DIG members LoTW eQSL DIG HSCW members LoTW DIG FOC HSCW members LoTW eQSL FOC HSCW members Guy ON4AOI http://www.on4aoi.be __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Bandmap radio frequency update speed v8.01
Any solution to speed up the bandmap ? I am Using IC-756PROIII with 19200bd and com port poll rate 1ms with microham microkeyer. Bandmap seems to be quite slow compared to ones I am used to ( win-test and N1MM ) Otherwise this bandmap is excellent update for DX4WIN, very readable and informative with colour coding B.R Olli OH6CT __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Bandmap radio frequency update speed v8.01
Speaking of the band map. After I saw it mentioned, I searched around trying to activate the band map. After an extended period, I finally figured out that I had to right click on the packet spots window to find the band map menu item. Ernie W8EH __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] DX4WIN.MAS2
Hey, I am trying to ad this file, and I am not getting it to stick. I must be doing something dumb with it. I believe I am following the directions in the help file, but something isn't working. Thanks from Brain Dead here. 73 John W9RPM EMAIL: j...@w9rpm.com WEBPAGE: http://www.w9rpm.com/ DX and CONTEST CLUB: http://www.w9idx.com/ AOL IM: W9RPM YAHOO: W9RPM __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] DX cluster hookup?
Hello all, This questions is regarding automatic hookup to a DX cluster like AR User by VE7CC? Right now when I bring up dx4win I have to click the connect button at the bottom of some window and then select which dx cluster I want to look at from a very long list and then enter my call, hit enter then click on SH/DX to see the DX. dx4win knows my call sign, my name, my qth, I can tell it what cluster I want, but maybe it already do this and I just don't know how to use this feature?? So is there an automatic way to just bring up dx4win and have it automatically connect to VE7CC ( or what ever dx cluster I previously select)?? Thanks in advance for any help. Dennis, k0eoo __ Information from ESET NOD32 Antivirus, version of virus signature database 4317 (20090808) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] DXCC summary report
Hello All I do have version 8 working, and I'm very pleased. But I do have one problem. First thing I did, see if my DXCC totals are correct. In Mixed it looks ok. But doing a check on Reports|DXCC|Summary and then mode PHO or CW, it gives the result for Mixed, not the mode I selected. Is this a bug? or do I miss something? 73 de Dick PA3FQA __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DXCC summary report
It's a bug, Paul will fix it. 73 - Jim AD1C On 8/8/2009 9:07 AM, Dick Grolleman wrote: Hello All I do have version 8 working, and I'm very pleased. But I do have one problem. First thing I did, see if my DXCC totals are correct. In Mixed it looks ok. But doing a check on Reports|DXCC|Summary and then mode PHO or CW, it gives the result for Mixed, not the mode I selected. Is this a bug? or do I miss something? 73 de Dick PA3FQA -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Bandmap radio frequency update speed v8.01
No. D4W requires polling and 1ms is impossible... an Icom radio cannot respond that quickly. About 500ms - 1000 ms seems to be ideal for most Icoms. Older radios should be even slower. Also I notice that there are issues with invalid data being picked up by the band-map if C-IV transceive is on. You must turn it off. Perhaps one day Paul will support asynchronous updates with Icom allowing the use of C-IV transceive... but for now we have to poll. With Async communications, bandmap updates could be much quicker... though I'm not really sure why it's important. Mel, VE2DC Olli Tuppurainen wrote: Any solution to speed up the bandmap ? I am Using IC-756PROIII with 19200bd and com port poll rate 1ms with microham microkeyer. Bandmap seems to be quite slow compared to ones I am used to ( win-test and N1MM ) Otherwise this bandmap is excellent update for DX4WIN, very readable and informative with colour coding B.R Olli OH6CT __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 Won't Key K3
1. The radio is a K3. The DX4WIN radio selection in preferences is Elecraft K3 X4. DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and RTS are checked. 2. I unchecked DX4WIN Radio Preference DTR and RTS and selected PSK31 PTT control setting. Still not keying the transmitter. 3. DX4WIN CW is set for COM 5, DTR Line CW Keying, RTS Line PTT Control. This setting works for sending CW. In PSK31 Settings I have keying line set to DTR and PTT set to PTT control. No transmitter keying with this setup. If I change PSK31 PTT to Com 5 I get the device already open error. I think this produces a conflict with DX4WIN claiming Com 5 and PSK31 also trying to claim Com 5. This is just a guess by me. I still don't know how to key the K3 transmitter in PSK31. Bud W3LL w...@arrl.net - Original Message - From: ON4AOI on4...@skynet.be To: 'Bud Governale, W3LL' w...@arrl.net Sent: Saturday, August 08, 2009 10:11 AM Subject: RE: [Dx4win] PSK31 Won't Key K3 1 what radio do you have ? If not needed uncheck DTR and RTS Select ptt control in psk31 setting Setup dx4win-cw via same port like radio is With correct setting of keyline and ptt for dtr and rts Guy -Oorspronkelijk bericht- Van: Bud Governale, W3LL [mailto:w...@arrl.net] Verzonden: zaterdag 8 augustus 2009 15:58 Aan: ON4AOI Onderwerp: Re: [Dx4win] PSK31 Won't Key K3 Guy, Thanks for the suggestion. The PSK31 com port was set on VOX. I changed it to the radio com port which is com 5. When I did this I get the following message: An exception occurred device is already open. DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and RTS are checked. I think we now have a conflict with DX4WIN claiming Com 5 and PSK31 also trying to claim Com 5. This is just a guess by me. What do I do to fix this? 73, Bud W3LL w...@arrl.net - Original Message - From: ON4AOI on4...@skynet.be To: 'Bud Governale, W3LL' w...@arrl.net Cc: dx4win@mailman.qth.net Sent: Saturday, August 08, 2009 1:26 AM Subject: RE: [Dx4win] PSK31 Won't Key K3 Make sure you set the correct comport for PSK31 Right click in psk31 window next to the shortcuts and there you can change the settings Guy ON4AOI -Oorspronkelijk bericht- Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- boun...@mailman.qth.net] Namens Bud Governale, W3LL Verzonden: zaterdag 8 augustus 2009 3:03 Aan: dx4win@mailman.qth.net Onderwerp: [Dx4win] PSK31 Won't Key K3 I'm trying to setup PSK31 using DX4WIN Version 7.07.02. When I hit the TX button I hear the tones but the K3 does not go into transmit. DX4WIN works perfectly in both MMTTY and CW. It keys and sends in both of those modes. What do I need to do to get DX4WIN PSK31 to key the K3? 73, Bud W3LL w...@arrl.net __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Bandmap radio frequency update speed v8.01
The radio shouldn't have anything to do with the updating of the bandmap. It all comes from the cluster connection. I have a PC in my office, no radio, bandmap works fine. Keeps me updated on that pesky DX! 73, Art W6KY - Original Message From: Olli Tuppurainen oh...@oh2u.com To: dx4win@mailman.qth.net Sent: Saturday, August 8, 2009 5:50:34 AM Subject: [Dx4win] Bandmap radio frequency update speed v8.01 Any solution to speed up the bandmap ? I am Using IC-756PROIII with 19200bd and com port poll rate 1ms with microham microkeyer. Bandmap seems to be quite slow compared to ones I am used to ( win-test and N1MM ) Otherwise this bandmap is excellent update for DX4WIN, very readable and informative with colour coding B.R Olli OH6CT __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DX cluster hookup?
Hi Dennis, Jim all; I raised this point a while ago (again!!); and am happily hooked up top AR Cluster, which I have configured to my home node. I still think that this is too many key strokes and ops; and my opinion is still that it should be automated, just like running Win Test. Here; once set up, it can be forgotten about; it just runs in a Telnet window. Mine is just an opinion, I am not the software writer; guess I know what I like and what I find a bit of a drag... Still to get round to updating to V8; been very busy, so am happy to let the dust settle for the moment. and then jump in.. 73 Dave G3NKC -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]on Behalf Of Jim Reisert AD1C Sent: 08 August 2009 16:17 To: Dennis Petrich Cc: DX4WIN Subject: Re: [Dx4win] DX cluster hookup? In 8.01, whatever node you select gets moved to the top of the list for next time. There is no way to do an automatic connect. You still have to enter your call. Please see the section called Tips here: http://dx4win.ad1c.us/cluster/index.htm#tips 73 - Jim AD1C On 8/8/2009 9:01 AM, Dennis Petrich wrote: Hello all, This questions is regarding automatic hookup to a DX cluster like AR User by VE7CC? Right now when I bring up dx4win I have to click the connect button at the bottom of some window and then select which dx cluster I want to look at from a very long list and then enter my call, hit enter then click on SH/DX to see the DX. dx4win knows my call sign, my name, my qth, I can tell it what cluster I want, but maybe it already do this and I just don't know how to use this feature?? So is there an automatic way to just bring up dx4win and have it automatically connect to VE7CC ( or what ever dx cluster I previously select)?? Thanks in advance for any help. Dennis, k0eoo -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DX cluster hookup?
I raised this issue several years ago and got a nasty rejection from the DX4WIN email support. Soured me on DX4WIN for years. In my opinion it is programming not worthy of a commercial product. The BandMap and moving the last used cluster to the top of the list are improvements. Starting the cluster in DX4WIN is a chore that shouldn't have remained for so many years. Apparently the DX cluster facility in DX4WIN is a very low priority. There are free DX Cluster programs available with more features and a better interface. And yes, I do use other programs for the DX Cluster. Bert N8NN -Original Message- From: Dave Sharred g3...@yahoo.co.uk Sent: Aug 8, 2009 1:48 PM To: Jim Reisert AD1C jjreis...@alum.mit.edu, Dennis Petrich radio...@frontiernet.net Cc: DX4WIN dx4win@mailman.qth.net Subject: Re: [Dx4win] DX cluster hookup? Hi Dennis, Jim all; I raised this point a while ago (again!!); and am happily hooked up top AR Cluster, which I have configured to my home node. I still think that this is too many key strokes and ops; and my opinion is still that it should be automated, just like running Win Test. Here; once set up, it can be forgotten about; it just runs in a Telnet window. Mine is just an opinion, I am not the software writer; guess I know what I like and what I find a bit of a drag... Still to get round to updating to V8; been very busy, so am happy to let the dust settle for the moment. and then jump in.. 73 Dave G3NKC -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]on Behalf Of Jim Reisert AD1C Sent: 08 August 2009 16:17 To: Dennis Petrich Cc: DX4WIN Subject: Re: [Dx4win] DX cluster hookup? In 8.01, whatever node you select gets moved to the top of the list for next time. There is no way to do an automatic connect. You still have to enter your call. Please see the section called Tips here: http://dx4win.ad1c.us/cluster/index.htm#tips 73 - Jim AD1C On 8/8/2009 9:01 AM, Dennis Petrich wrote: Hello all, This questions is regarding automatic hookup to a DX cluster like AR User by VE7CC? Right now when I bring up dx4win I have to click the connect button at the bottom of some window and then select which dx cluster I want to look at from a very long list and then enter my call, hit enter then click on SH/DX to see the DX. dx4win knows my call sign, my name, my qth, I can tell it what cluster I want, but maybe it already do this and I just don't know how to use this feature?? So is there an automatic way to just bring up dx4win and have it automatically connect to VE7CC ( or what ever dx cluster I previously select)?? Thanks in advance for any help. Dennis, k0eoo -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DX cluster hookup?
Hmmm, It takes three clicks with the mouse to connect to your favorite cluster. I cannot see any big human energy savings if it is done automatically. And then it will be much more difficult to choose another cluster. I am lazy, too, but not THAT lazy. 73 Erkki OH2BF -Alkuperäinen viesti- Lähettäjä: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] Puolesta N8NN Lähetetty: 8. elokuuta 2009 21:16 Vastaanottaja: Dave Sharred; Jim Reisert AD1C; Dennis Petrich Kopio: DX4WIN Aihe: Re: [Dx4win] DX cluster hookup? I raised this issue several years ago and got a nasty rejection from the DX4WIN email support. Soured me on DX4WIN for years. In my opinion it is programming not worthy of a commercial product. The BandMap and moving the last used cluster to the top of the list are improvements. Starting the cluster in DX4WIN is a chore that shouldn't have remained for so many years. Apparently the DX cluster facility in DX4WIN is a very low priority. There are free DX Cluster programs available with more features and a better interface. And yes, I do use other programs for the DX Cluster. Bert N8NN -Original Message- From: Dave Sharred g3...@yahoo.co.uk Sent: Aug 8, 2009 1:48 PM To: Jim Reisert AD1C jjreis...@alum.mit.edu, Dennis Petrich radio...@frontiernet.net Cc: DX4WIN dx4win@mailman.qth.net Subject: Re: [Dx4win] DX cluster hookup? Hi Dennis, Jim all; I raised this point a while ago (again!!); and am happily hooked up top AR Cluster, which I have configured to my home node. I still think that this is too many key strokes and ops; and my opinion is still that it should be automated, just like running Win Test. Here; once set up, it can be forgotten about; it just runs in a Telnet window. Mine is just an opinion, I am not the software writer; guess I know what I like and what I find a bit of a drag... Still to get round to updating to V8; been very busy, so am happy to let the dust settle for the moment. and then jump in.. 73 Dave G3NKC -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]on Behalf Of Jim Reisert AD1C Sent: 08 August 2009 16:17 To: Dennis Petrich Cc: DX4WIN Subject: Re: [Dx4win] DX cluster hookup? In 8.01, whatever node you select gets moved to the top of the list for next time. There is no way to do an automatic connect. You still have to enter your call. Please see the section called Tips here: http://dx4win.ad1c.us/cluster/index.htm#tips 73 - Jim AD1C On 8/8/2009 9:01 AM, Dennis Petrich wrote: Hello all, This questions is regarding automatic hookup to a DX cluster like AR User by VE7CC? Right now when I bring up dx4win I have to click the connect button at the bottom of some window and then select which dx cluster I want to look at from a very long list and then enter my call, hit enter then click on SH/DX to see the DX. dx4win knows my call sign, my name, my qth, I can tell it what cluster I want, but maybe it already do this and I just don't know how to use this feature?? So is there an automatic way to just bring up dx4win and have it automatically connect to VE7CC ( or what ever dx cluster I previously select)?? Thanks in advance for any help. Dennis, k0eoo -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DX cluster hookup?
Erkki you can spare some energy when you use both hands .. click with left hand in packetscreen and enter enter with right hand Guy -Oorspronkelijk bericht- Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- boun...@mailman.qth.net] Namens Erkki Heikkinen Verzonden: zaterdag 8 augustus 2009 20:31 Aan: 'N8NN'; 'Dave Sharred'; 'Jim Reisert AD1C'; 'Dennis Petrich' CC: 'DX4WIN' Onderwerp: Re: [Dx4win] DX cluster hookup? Hmmm, It takes three clicks with the mouse to connect to your favorite cluster. I cannot see any big human energy savings if it is done automatically. And then it will be much more difficult to choose another cluster. I am lazy, too, but not THAT lazy. 73 Erkki OH2BF -Alkuperäinen viesti- Lähettäjä: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] Puolesta N8NN Lähetetty: 8. elokuuta 2009 21:16 Vastaanottaja: Dave Sharred; Jim Reisert AD1C; Dennis Petrich Kopio: DX4WIN Aihe: Re: [Dx4win] DX cluster hookup? I raised this issue several years ago and got a nasty rejection from the DX4WIN email support. Soured me on DX4WIN for years. In my opinion it is programming not worthy of a commercial product. The BandMap and moving the last used cluster to the top of the list are improvements. Starting the cluster in DX4WIN is a chore that shouldn't have remained for so many years. Apparently the DX cluster facility in DX4WIN is a very low priority. There are free DX Cluster programs available with more features and a better interface. And yes, I do use other programs for the DX Cluster. Bert N8NN -Original Message- From: Dave Sharred g3...@yahoo.co.uk Sent: Aug 8, 2009 1:48 PM To: Jim Reisert AD1C jjreis...@alum.mit.edu, Dennis Petrich radio...@frontiernet.net Cc: DX4WIN dx4win@mailman.qth.net Subject: Re: [Dx4win] DX cluster hookup? Hi Dennis, Jim all; I raised this point a while ago (again!!); and am happily hooked up top AR Cluster, which I have configured to my home node. I still think that this is too many key strokes and ops; and my opinion is still that it should be automated, just like running Win Test. Here; once set up, it can be forgotten about; it just runs in a Telnet window. Mine is just an opinion, I am not the software writer; guess I know what I like and what I find a bit of a drag... Still to get round to updating to V8; been very busy, so am happy to let the dust settle for the moment. and then jump in.. 73 Dave G3NKC -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]on Behalf Of Jim Reisert AD1C Sent: 08 August 2009 16:17 To: Dennis Petrich Cc: DX4WIN Subject: Re: [Dx4win] DX cluster hookup? In 8.01, whatever node you select gets moved to the top of the list for next time. There is no way to do an automatic connect. You still have to enter your call. Please see the section called Tips here: http://dx4win.ad1c.us/cluster/index.htm#tips 73 - Jim AD1C On 8/8/2009 9:01 AM, Dennis Petrich wrote: Hello all, This questions is regarding automatic hookup to a DX cluster like AR User by VE7CC? Right now when I bring up dx4win I have to click the connect button at the bottom of some window and then select which dx cluster I want to look at from a very long list and then enter my call, hit enter then click on SH/DX to see the DX. dx4win knows my call sign, my name, my qth, I can tell it what cluster I want, but maybe it already do this and I just don't know how to use this feature?? So is there an automatic way to just bring up dx4win and have it automatically connect to VE7CC ( or what ever dx cluster I previously select)?? Thanks in advance for any help. Dennis, k0eoo -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email
Re: [Dx4win] DX cluster hookup?
Oh for crying out loud! It's NOT a lot of work to connect. But after you have done it many thousands of times it DOES get irritating. Every other logging program I have used takes care of this little detail... why can't DX4Win? It's not something that needs to be done right now... but it is a small detail that Paul should look at... and I suspect its somewhere on his list. Erkki Heikkinen wrote: Hmmm, It takes three clicks with the mouse to connect to your favorite cluster. I cannot see any big human energy savings if it is done automatically. And then it will be much more difficult to choose another cluster. I am lazy, too, but not THAT lazy. 73 Erkki OH2BF -Alkuperäinen viesti- Lähettäjä: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] Puolesta N8NN Lähetetty: 8. elokuuta 2009 21:16 Vastaanottaja: Dave Sharred; Jim Reisert AD1C; Dennis Petrich Kopio: DX4WIN Aihe: Re: [Dx4win] DX cluster hookup? I raised this issue several years ago and got a nasty rejection from the DX4WIN email support. Soured me on DX4WIN for years. In my opinion it is programming not worthy of a commercial product. The BandMap and moving the last used cluster to the top of the list are improvements. Starting the cluster in DX4WIN is a chore that shouldn't have remained for so many years. Apparently the DX cluster facility in DX4WIN is a very low priority. There are free DX Cluster programs available with more features and a better interface. And yes, I do use other programs for the DX Cluster. Bert N8NN -Original Message- From: Dave Sharred g3...@yahoo.co.uk Sent: Aug 8, 2009 1:48 PM To: Jim Reisert AD1C jjreis...@alum.mit.edu, Dennis Petrich radio...@frontiernet.net Cc: DX4WIN dx4win@mailman.qth.net Subject: Re: [Dx4win] DX cluster hookup? Hi Dennis, Jim all; I raised this point a while ago (again!!); and am happily hooked up top AR Cluster, which I have configured to my home node. I still think that this is too many key strokes and ops; and my opinion is still that it should be automated, just like running Win Test. Here; once set up, it can be forgotten about; it just runs in a Telnet window. Mine is just an opinion, I am not the software writer; guess I know what I like and what I find a bit of a drag... Still to get round to updating to V8; been very busy, so am happy to let the dust settle for the moment. and then jump in.. 73 Dave G3NKC -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]on Behalf Of Jim Reisert AD1C Sent: 08 August 2009 16:17 To: Dennis Petrich Cc: DX4WIN Subject: Re: [Dx4win] DX cluster hookup? In 8.01, whatever node you select gets moved to the top of the list for next time. There is no way to do an automatic connect. You still have to enter your call. Please see the section called Tips here: http://dx4win.ad1c.us/cluster/index.htm#tips 73 - Jim AD1C On 8/8/2009 9:01 AM, Dennis Petrich wrote: Hello all, This questions is regarding automatic hookup to a DX cluster like AR User by VE7CC? Right now when I bring up dx4win I have to click the connect button at the bottom of some window and then select which dx cluster I want to look at from a very long list and then enter my call, hit enter then click on SH/DX to see the DX. dx4win knows my call sign, my name, my qth, I can tell it what cluster I want, but maybe it already do this and I just don't know how to use this feature?? So is there an automatic way to just bring up dx4win and have it automatically connect to VE7CC ( or what ever dx cluster I previously select)?? Thanks in advance for any help. Dennis, k0eoo -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help:
Re: [Dx4win] Ver 8.01 issues
It does not work this way Guy! I am also in trouble with the delimiter as I have used space between name and QTH. I have been trying to find way to export the log to change the delimiter but it is impossible with DXQ-QXN export-import because the Notes for This Call gets doubled! Meaning the old values are not replaced whatever you do but anything you import on top of them are added with /. Even if you export your log, delete ALL QSOs after that and import all the QSOs back then your Notes for This Call get multiplied by two with / in between. Crazy. And it is not possible to open a new log file (thus getting rid of the old Notes... data) and import all QSOs there because then you also lose all the Groups list. Thus as far as I have no idea how do change delimiter automatically in ADIF file with my domestic tools like excel etc I don't see any way to accomplish this task without the program being modified to let the user choose the delimiter, better yet logic similar to Excel Text to Columns. What I really need is to be able to split at the first space. As there are often spaces in QTH description (like near Rome or alike). 73 Tonno ES5TV -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of ON4AOI Sent: Tuesday, August 04, 2009 6:27 PM To: 'Mel' Cc: dx4win@mailman.qth.net Subject: Re: [Dx4win] Ver 8.01 issues Thats normally fixed in a few minutes In version 7 Export your log DX4WIN6 THE *.DXN file contains the name and qth, change the delimiter with textpad or similar to IN Save and import Guy ON4AOI -Oorspronkelijk bericht- Van: Mel [mailto:ve...@videotron.ca] Verzonden: dinsdag 4 augustus 2009 17:18 Aan: ON4AOI Onderwerp: Re: [Dx4win] Ver 8.01 issues very nice... but I have 25,000 QSOs not formatted that way Guy ;-) ON4AOI wrote: Mel and others The delimiter in or IN works perfect So MEL IN STE-MARTINE works 100 % And will populate Name = MEL and QTH= STE-MARTINE When you do multiple QSO´s operations - Set Name and Qth Guy ON4AOI -Oorspronkelijk bericht- Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- boun...@mailman.qth.net] Namens Mel Verzonden: dinsdag 4 augustus 2009 17:07 Aan: David, K2DBK CC: DX4WIN Onderwerp: Re: [Dx4win] Ver 8.01 issues I would suggest that you not use DX4Win to populate the name and QTH fields then. If Paul doesn't allow a specified delimiter (, or | or in) then either Jim will modify one of his programs or I will write a new one. I already have a program than could do this (To recognize a , as well as | is a one line change) but it works with ADIF which doesn't preserve LotW status for example. I used it to transfer DX4Win data to another logger I was testing (D4W was better). Jim's programs work with DXQ which is preferable... so I'm hoping that he might hack one of his programs if we ask him really nicely ;-) Mel...VE2DC David, K2DBK wrote: I'd been using , (such as David, River Vale) but I can live with it. I suppose the optimal solution would be to have the user specify the delimiter, but if I really feel the need I can export my log, massage the data, and re-import it. I'm just happy to have the new version out, and am anxiously awaiting my version 8 key. :-) Mel wrote: Perhaps he could also delimit on |... I don't believe I am the only one using this convention. re MFSK ... conversion to MFSK16 should be OK as I don't think MFSK8 is used a lot not really an issue here as I can change the few QSOS involved manually in less time than it took me to complain about it ;-) I exported in DX4Win ver 6.03 format. I'll send you the file if you like Jim. Maybe you could make your program QSX Name fix... I already wrote a program to do this and it works fine... but it works on the ADIF file. If I export/import ADIF I will lose information. I will send file direct. Jim Reisert AD1C wrote: Regarding name, etc. If you read the on-line help, you'll see that DX4WIN looks for: name in QTH MFSK is not a real mode. Neither is PSK. PSK was removed from this release, QSOs should automatically convert to PSK31. For QSOs where the Frequency string was Frequency=N,NNNKHz) the Frequency= was left in the notes field instead of being supressed. Since that's from an import, Paul can (hopefully) fix this. I can modify my qsxfix program to deal with this. I'm curious about the Satellite QSOs. What export/import format did you use? Would you be willing to send me the file you tried to import (please ZIP it first)? 73 - Jim AD1C On Tue, Aug 4, 2009 at 8:05 AM, Melve...@videotron.ca wrote: I exported my ver data and imported it into ver 8 to verify the data converts properly. Issues... I had a few rejects where the mode was MFSK... should probably convert to
Re: [Dx4win] DX cluster hookup?
Here Here Mel ! There are many features that if you analysed it you could do with just a few mouse clicks; and they all add up. - rig control / mode selection - is a nice to have in a logging programme; but we accept that the user is not lazy for wanting it (I bet someone used Erkki's argument 15 years ago ! - Rotator control - entering time automatically What about in DX4WIN operator preferences - they save you having to configure the programme every time you use it; for your laziness! We accept these niceties; and the same should be true of other features that would enhance the programme! In Win Test, which was the example I used, the choice of which cluster to use etc is still down to the user; it is merely anther preference that he sets up. I think about it as operator convenience; rather than laziness. I have enough things to do with my PC before I want to operate! 73 Dave G3NKC -Original Message- From: Mel [mailto:ve...@videotron.ca] Sent: 08 August 2009 20:08 To: Erkki Heikkinen Cc: 'N8NN'; 'Dave Sharred'; 'Jim Reisert AD1C'; 'Dennis Petrich'; 'DX4WIN' Subject: Re: [Dx4win] DX cluster hookup? Oh for crying out loud! It's NOT a lot of work to connect. But after you have done it many thousands of times it DOES get irritating. Every other logging program I have used takes care of this little detail... why can't DX4Win? It's not something that needs to be done right now... but it is a small detail that Paul should look at... and I suspect its somewhere on his list. Erkki Heikkinen wrote: Hmmm, It takes three clicks with the mouse to connect to your favorite cluster. I cannot see any big human energy savings if it is done automatically. And then it will be much more difficult to choose another cluster. I am lazy, too, but not THAT lazy. 73 Erkki OH2BF __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DX4WIN.MAS2
John, Place the downloaded master file list into your DX4WIN folder. Load DX4win and click on Window then Master Calls. Right click on the Master Lookup window and select Convert. The Open window will display your DX4win folder. Select the file MASTER.DTA by double clicking on it and DX4win will open the file, convert it for use with DX4win and display another window, Information, which will indicate Conversion finished 44927 Calls. The first time you enter a Callsign you will see the MasterLookup window display a list of similar callsigns. Hope this helps you. - Tony, N3ME - -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of W9RPM Sent: Saturday, August 08, 2009 15:41 PM To: DX4WIN Subject: [Dx4win] DX4WIN.MAS2 Hey, I am trying to ad this file, and I am not getting it to stick. I must be doing something dumb with it. I believe I am following the directions in the help file, but something isn't working. Thanks from Brain Dead here. 73 John W9RPM EMAIL: j...@w9rpm.com WEBPAGE: http://www.w9rpm.com/ DX and CONTEST CLUB: http://www.w9idx.com/ AOL IM: W9RPM YAHOO: W9RPM __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.406 / Virus Database: 270.13.47/2290 - Release Date: 08/08/09 06:10:00 __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Use of F8 problem.
??? F8 works fine with the new version. There is no difference between a new QSO and an old QSO. Did you open the correct file? Ing. Miloš Prostecký wrote: After upgrading to 8.01 it is not possible to find new calls by F8 key which was add to log. What is wrong? All old contact are correct. 73, Milos, OK1MP No virus found in this outgoing message. Checked by AVG - www.avg.com Version: 8.5.406 / Virus Database: 270.13.47/2289 - Release Date: 08/07/09 18:37:00 __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Ver 8.01 issues
When you re-import you log into an empty file from a DXQ/DXN set... it should not double up... I tried Guy's solution also. I had been using | as a separator... but I also had many records with 3 fields... result was a 6 solid hours of fixup... not something I ever want to do again! Tonno Vahk wrote: It does not work this way Guy! I am also in trouble with the delimiter as I have used space between name and QTH. I have been trying to find way to export the log to change the delimiter but it is impossible with DXQ-QXN export-import because the Notes for This Call gets doubled! Meaning the old values are not replaced whatever you do but anything you import on top of them are added with /. Even if you export your log, delete ALL QSOs after that and import all the QSOs back then your Notes for This Call get multiplied by two with / in between. Crazy. And it is not possible to open a new log file (thus getting rid of the old Notes... data) and import all QSOs there because then you also lose all the Groups list. Thus as far as I have no idea how do change delimiter automatically in ADIF file with my domestic tools like excel etc I don't see any way to accomplish this task without the program being modified to let the user choose the delimiter, better yet logic similar to Excel Text to Columns. What I really need is to be able to split at the first space. As there are often spaces in QTH description (like near Rome or alike). 73 Tonno ES5TV -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of ON4AOI Sent: Tuesday, August 04, 2009 6:27 PM To: 'Mel' Cc: dx4win@mailman.qth.net Subject: Re: [Dx4win] Ver 8.01 issues Thats normally fixed in a few minutes In version 7 Export your log DX4WIN6 THE *.DXN file contains the name and qth, change the delimiter with textpad or similar to IN Save and import Guy ON4AOI -Oorspronkelijk bericht- Van: Mel [mailto:ve...@videotron.ca] Verzonden: dinsdag 4 augustus 2009 17:18 Aan: ON4AOI Onderwerp: Re: [Dx4win] Ver 8.01 issues very nice... but I have 25,000 QSOs not formatted that way Guy ;-) ON4AOI wrote: Mel and others The delimiter in or IN works perfect So MEL IN STE-MARTINE works 100 % And will populate Name = MEL and QTH= STE-MARTINE When you do multiple QSO´s operations - Set Name and Qth Guy ON4AOI -Oorspronkelijk bericht- Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- boun...@mailman.qth.net] Namens Mel Verzonden: dinsdag 4 augustus 2009 17:07 Aan: David, K2DBK CC: DX4WIN Onderwerp: Re: [Dx4win] Ver 8.01 issues I would suggest that you not use DX4Win to populate the name and QTH fields then. If Paul doesn't allow a specified delimiter (, or | or in) then either Jim will modify one of his programs or I will write a new one. I already have a program than could do this (To recognize a , as well as | is a one line change) but it works with ADIF which doesn't preserve LotW status for example. I used it to transfer DX4Win data to another logger I was testing (D4W was better). Jim's programs work with DXQ which is preferable... so I'm hoping that he might hack one of his programs if we ask him really nicely ;-) Mel...VE2DC David, K2DBK wrote: I'd been using , (such as David, River Vale) but I can live with it. I suppose the optimal solution would be to have the user specify the delimiter, but if I really feel the need I can export my log, massage the data, and re-import it. I'm just happy to have the new version out, and am anxiously awaiting my version 8 key. :-) Mel wrote: Perhaps he could also delimit on |... I don't believe I am the only one using this convention. re MFSK ... conversion to MFSK16 should be OK as I don't think MFSK8 is used a lot not really an issue here as I can change the few QSOS involved manually in less time than it took me to complain about it ;-) I exported in DX4Win ver 6.03 format. I'll send you the file if you like Jim. Maybe you could make your program QSX Name fix... I already wrote a program to do this and it works fine... but it works on the ADIF file. If I export/import ADIF I will lose information. I will send file direct. Jim Reisert AD1C wrote: Regarding name, etc. If you read the on-line help, you'll see that DX4WIN looks for: name in QTH MFSK is not a real mode. Neither is PSK. PSK was removed from this release, QSOs should automatically convert to PSK31. For QSOs where the Frequency string was Frequency=N,NNNKHz) the Frequency= was left in the notes field instead of being supressed. Since that's from an import, Paul can (hopefully) fix this. I can modify my qsxfix program to deal with this. I'm curious about the Satellite QSOs. What export/import format did you use? Would you be willing to send me the file you tried to import (please ZIP it first)? 73 - Jim AD1C On
Re: [Dx4win] Use of F8 problem.
Milos, I think (I'm guessing) that it has to do with the number notation. When you start a filter, and do not want to enter a value for the frequency, the field shows up as 0.0 and is therefore ignored. This also means you cannot search for the value 0.0 either, but that is another problem. When your international setup is for the period as the separator, the F8 works fine. When it is a comma (in your case I guess) the 0,0 is not seen as zero and becomes part of the search value(s) making the search fail. Another thing todo! --73, Paul, KK4HD Ing. Miloš Prostecký wrote: After upgrading to 8.01 it is not possible to find new calls by F8 key which was add to log. What is wrong? All old contact are correct. 73, Milos, OK1MP No virus found in this outgoing message. Checked by AVG - www.avg.com Version: 8.5.406 / Virus Database: 270.13.47/2289 - Release Date: 08/07/09 18:37:00 __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.392 / Virus Database: 270.13.47/2290 - Release Date: 08/08/09 06:10:00 __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Ver 8.01 issues
Mel (and others) Or you can wait doing this until I come up with a smarter algorithm! --Paul, KK4HD Mel wrote: When you re-import you log into an empty file from a DXQ/DXN set... it should not double up... I tried Guy's solution also. I had been using | as a separator... but I also had many records with 3 fields... result was a 6 solid hours of fixup... not something I ever want to do again! Tonno Vahk wrote: It does not work this way Guy! I am also in trouble with the delimiter as I have used space between name and QTH. I have been trying to find way to export the log to change the delimiter but it is impossible with DXQ-QXN export-import because the Notes for This Call gets doubled! Meaning the old values are not replaced whatever you do but anything you import on top of them are added with /. Even if you export your log, delete ALL QSOs after that and import all the QSOs back then your Notes for This Call get multiplied by two with / in between. Crazy. And it is not possible to open a new log file (thus getting rid of the old Notes... data) and import all QSOs there because then you also lose all the Groups list. Thus as far as I have no idea how do change delimiter automatically in ADIF file with my domestic tools like excel etc I don't see any way to accomplish this task without the program being modified to let the user choose the delimiter, better yet logic similar to Excel Text to Columns. What I really need is to be able to split at the first space. As there are often spaces in QTH description (like near Rome or alike). 73 Tonno ES5TV -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of ON4AOI Sent: Tuesday, August 04, 2009 6:27 PM To: 'Mel' Cc: dx4win@mailman.qth.net Subject: Re: [Dx4win] Ver 8.01 issues Thats normally fixed in a few minutes In version 7 Export your log DX4WIN6 THE *.DXN file contains the name and qth, change the delimiter with textpad or similar to IN Save and import Guy ON4AOI -Oorspronkelijk bericht- Van: Mel [mailto:ve...@videotron.ca] Verzonden: dinsdag 4 augustus 2009 17:18 Aan: ON4AOI Onderwerp: Re: [Dx4win] Ver 8.01 issues very nice... but I have 25,000 QSOs not formatted that way Guy ;-) ON4AOI wrote: Mel and others The delimiter in or IN works perfect So MEL IN STE-MARTINE works 100 % And will populate Name = MEL and QTH= STE-MARTINE When you do multiple QSO´s operations - Set Name and Qth Guy ON4AOI -Oorspronkelijk bericht- Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- boun...@mailman.qth.net] Namens Mel Verzonden: dinsdag 4 augustus 2009 17:07 Aan: David, K2DBK CC: DX4WIN Onderwerp: Re: [Dx4win] Ver 8.01 issues I would suggest that you not use DX4Win to populate the name and QTH fields then. If Paul doesn't allow a specified delimiter (, or | or in) then either Jim will modify one of his programs or I will write a new one. I already have a program than could do this (To recognize a , as well as | is a one line change) but it works with ADIF which doesn't preserve LotW status for example. I used it to transfer DX4Win data to another logger I was testing (D4W was better). Jim's programs work with DXQ which is preferable... so I'm hoping that he might hack one of his programs if we ask him really nicely ;-) Mel...VE2DC David, K2DBK wrote: I'd been using , (such as David, River Vale) but I can live with it. I suppose the optimal solution would be to have the user specify the delimiter, but if I really feel the need I can export my log, massage the data, and re-import it. I'm just happy to have the new version out, and am anxiously awaiting my version 8 key. :-) Mel wrote: Perhaps he could also delimit on |... I don't believe I am the only one using this convention. re MFSK ... conversion to MFSK16 should be OK as I don't think MFSK8 is used a lot not really an issue here as I can change the few QSOS involved manually in less time than it took me to complain about it ;-) I exported in DX4Win ver 6.03 format. I'll send you the file if you like Jim. Maybe you could make your program QSX Name fix... I already wrote a program to do this and it works fine... but it works on the ADIF file. If I export/import ADIF I will lose information. I will send file direct. Jim Reisert AD1C wrote: Regarding name, etc. If you read the on-line help, you'll see that DX4WIN looks for: name in QTH MFSK is not
Re: [Dx4win] PSK31 Won't Key K3
Bud, If someone helps your or you finally master the problem, please share as I am experiencing the same and cannot figure it out. I have tried to suggested software, which supposedly supports multiple software programs all using the same COM port with no success thus far. Previously, (Kenwood 570D) I used a Rigblaster pro and that allowed everything to work with a single COM port (CW, PSK, SSB and RTTY). Thus far I am making slow progress with K3 (wonderful radio). - Tony , N3ME - -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Bud Governale, W3LL Sent: Saturday, August 08, 2009 16:55 PM To: dx4win@mailman.qth.net Subject: [Dx4win] PSK31 Won't Key K3 1. The radio is a K3. The DX4WIN radio selection in preferences is Elecraft K3 X4. DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and RTS are checked. 2. I unchecked DX4WIN Radio Preference DTR and RTS and selected PSK31 PTT control setting. Still not keying the transmitter. 3. DX4WIN CW is set for COM 5, DTR Line CW Keying, RTS Line PTT Control. This setting works for sending CW. In PSK31 Settings I have keying line set to DTR and PTT set to PTT control. No transmitter keying with this setup. If I change PSK31 PTT to Com 5 I get the device already open error. I think this produces a conflict with DX4WIN claiming Com 5 and PSK31 also trying to claim Com 5. This is just a guess by me. I still don't know how to key the K3 transmitter in PSK31. Bud W3LL w...@arrl.net - Original Message - From: ON4AOI on4...@skynet.be To: 'Bud Governale, W3LL' w...@arrl.net Sent: Saturday, August 08, 2009 10:11 AM Subject: RE: [Dx4win] PSK31 Won't Key K3 1 what radio do you have ? If not needed uncheck DTR and RTS Select ptt control in psk31 setting Setup dx4win-cw via same port like radio is With correct setting of keyline and ptt for dtr and rts Guy -Oorspronkelijk bericht- Van: Bud Governale, W3LL [mailto:w...@arrl.net] Verzonden: zaterdag 8 augustus 2009 15:58 Aan: ON4AOI Onderwerp: Re: [Dx4win] PSK31 Won't Key K3 Guy, Thanks for the suggestion. The PSK31 com port was set on VOX. I changed it to the radio com port which is com 5. When I did this I get the following message: An exception occurred device is already open. DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and RTS are checked. I think we now have a conflict with DX4WIN claiming Com 5 and PSK31 also trying to claim Com 5. This is just a guess by me. What do I do to fix this? 73, Bud W3LL w...@arrl.net - Original Message - From: ON4AOI on4...@skynet.be To: 'Bud Governale, W3LL' w...@arrl.net Cc: dx4win@mailman.qth.net Sent: Saturday, August 08, 2009 1:26 AM Subject: RE: [Dx4win] PSK31 Won't Key K3 Make sure you set the correct comport for PSK31 Right click in psk31 window next to the shortcuts and there you can change the settings Guy ON4AOI -Oorspronkelijk bericht- Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- boun...@mailman.qth.net] Namens Bud Governale, W3LL Verzonden: zaterdag 8 augustus 2009 3:03 Aan: dx4win@mailman.qth.net Onderwerp: [Dx4win] PSK31 Won't Key K3 I'm trying to setup PSK31 using DX4WIN Version 7.07.02. When I hit the TX button I hear the tones but the K3 does not go into transmit. DX4WIN works perfectly in both MMTTY and CW. It keys and sends in both of those modes. What do I need to do to get DX4WIN PSK31 to key the K3? 73, Bud W3LL w...@arrl.net __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.406 / Virus Database: 270.13.47/2290 - Release Date: 08/08/09 06:10:00 __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DX cluster hookup?
On Sat, Aug 8, 2009 at 12:15 PM, N8NNn...@earthlink.net wrote: Starting the cluster in DX4WIN is a chore that shouldn't have remained for so many years. Apparently the DX cluster facility in DX4WIN is a very low priority. Paul tried to do something shortly before 8.01 was released, but ran into a programming issue he could not solve. If you use the VE7CC user program between DX4WIN and your cluster node, then you don't even have to type in the callsign when connecting DX4WIN to the cluster. Plus the VE7CC program will do auto-reconnect if the connection is lost. -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DX4WIN.MAS2
Tony, those are instructions for the MAS1, or master callsign database. John is asking about the MAS2 file, the list of members which is new to DX4WIN 8. It's not a typo. 73 - Jim AD1C On Sat, Aug 8, 2009 at 12:45 PM, Tony McClennyn...@n3me.net wrote: John, Place the downloaded master file list into your DX4WIN folder. Load DX4win and click on Window then Master Calls. Right click on the Master Lookup window and select Convert. The Open window will display your DX4win folder. Select the file MASTER.DTA by double clicking on it and DX4win will open the file, convert it for use with DX4win and display another window, Information, which will indicate Conversion finished 44927 Calls. The first time you enter a Callsign you will see the MasterLookup window display a list of similar callsigns. Hope this helps you. - Tony, N3ME - -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of W9RPM Sent: Saturday, August 08, 2009 15:41 PM To: DX4WIN Subject: [Dx4win] DX4WIN.MAS2 Hey, I am trying to ad this file, and I am not getting it to stick. I must be doing something dumb with it. I believe I am following the directions in the help file, but something isn't working. Thanks from Brain Dead here. 73 John W9RPM EMAIL: j...@w9rpm.com WEBPAGE: http://www.w9rpm.com/ DX and CONTEST CLUB: http://www.w9idx.com/ AOL IM: W9RPM YAHOO: W9RPM -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] PSK31 Won't Key K3
Version 7.07.02 If both CW and Radio ports in DX4WIN Preferences are changed to None, then PSK31 can be set to Com 5 (the K3 port) and it will key the K3. However, this leaves no control of the radio (K3) and is not a viable solution. It test just proves, I think, that DX4WIN is not allowing itself and PSK31 to use the same radio port. Does anybody have PSK31 working with the K3 radio? If so, what am I doing wrong. Help please from anybody. 73, Bud W3LL w...@arrl.net - Original Message - From: Bud Governale, W3LL w...@arrl.net To: dx4win@mailman.qth.net Sent: Saturday, August 08, 2009 11:54 AM Subject: [Dx4win] PSK31 Won't Key K3 1. The radio is a K3. The DX4WIN radio selection in preferences is Elecraft K3 X4. DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and RTS are checked. 2. I unchecked DX4WIN Radio Preference DTR and RTS and selected PSK31 PTT control setting. Still not keying the transmitter. 3. DX4WIN CW is set for COM 5, DTR Line CW Keying, RTS Line PTT Control. This setting works for sending CW. In PSK31 Settings I have keying line set to DTR and PTT set to PTT control. No transmitter keying with this setup. If I change PSK31 PTT to Com 5 I get the device already open error. I think this produces a conflict with DX4WIN claiming Com 5 and PSK31 also trying to claim Com 5. This is just a guess by me. I still don't know how to key the K3 transmitter in PSK31. Bud W3LL w...@arrl.net - Original Message - From: ON4AOI on4...@skynet.be To: 'Bud Governale, W3LL' w...@arrl.net Sent: Saturday, August 08, 2009 10:11 AM Subject: RE: [Dx4win] PSK31 Won't Key K3 1 what radio do you have ? If not needed uncheck DTR and RTS Select ptt control in psk31 setting Setup dx4win-cw via same port like radio is With correct setting of keyline and ptt for dtr and rts Guy -Oorspronkelijk bericht- Van: Bud Governale, W3LL [mailto:w...@arrl.net] Verzonden: zaterdag 8 augustus 2009 15:58 Aan: ON4AOI Onderwerp: Re: [Dx4win] PSK31 Won't Key K3 Guy, Thanks for the suggestion. The PSK31 com port was set on VOX. I changed it to the radio com port which is com 5. When I did this I get the following message: An exception occurred device is already open. DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and RTS are checked. I think we now have a conflict with DX4WIN claiming Com 5 and PSK31 also trying to claim Com 5. This is just a guess by me. What do I do to fix this? 73, Bud W3LL w...@arrl.net - Original Message - From: ON4AOI on4...@skynet.be To: 'Bud Governale, W3LL' w...@arrl.net Cc: dx4win@mailman.qth.net Sent: Saturday, August 08, 2009 1:26 AM Subject: RE: [Dx4win] PSK31 Won't Key K3 Make sure you set the correct comport for PSK31 Right click in psk31 window next to the shortcuts and there you can change the settings Guy ON4AOI -Oorspronkelijk bericht- Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- boun...@mailman.qth.net] Namens Bud Governale, W3LL Verzonden: zaterdag 8 augustus 2009 3:03 Aan: dx4win@mailman.qth.net Onderwerp: [Dx4win] PSK31 Won't Key K3 I'm trying to setup PSK31 using DX4WIN Version 7.07.02. When I hit the TX button I hear the tones but the K3 does not go into transmit. DX4WIN works perfectly in both MMTTY and CW. It keys and sends in both of those modes. What do I need to do to get DX4WIN PSK31 to key the K3? 73, Bud W3LL w...@arrl.net __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Invalid value
I know that is not needed to import the DXL file from the version 7, just copy it to the SAVE directory and it is done, but... I exported the DXL file using the 7 version, opened the 8 version, created a brand new log file and imported the log from DXQ DXN files. Using the version 7 I need 3 countries in 20 meters, say: P5, FT5W and KP1. The version 8.01 said that I only need FT5 and KP1. I carefull checked the differences to find out that the I flag in the DXCC fields (Mixed, band and mode) were not flagged. Somehow, the importation procedure ignored the invalid value in the ValidDX field in the 7 version. To be sure about that I did generate a report, using the 7 version, producing 51 invalid QSOs; none of them does appear in the version 8. Of course I can manually enter the I value in the proper fields, which I will do, but I think there is a little problem to be fixed. -- 73 DX de PY2YP - Cesar __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Ver 8.01 issues
Mel, that is what I am saying - in that case it does not double but I cannot use it because importing into new empty log file does not bring the Groups along. All the Groups are missing and I don't know how to get them to come along from the old file. They are the same kind of hidden info like Notes for This Call. You have both or you have neither it seems... -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Mel Sent: Saturday, August 08, 2009 11:19 PM Cc: dx4win@mailman.qth.net Subject: Re: [Dx4win] Ver 8.01 issues When you re-import you log into an empty file from a DXQ/DXN set... it should not double up... I tried Guy's solution also. I had been using | as a separator... but I also had many records with 3 fields... result was a 6 solid hours of fixup... not something I ever want to do again! Tonno Vahk wrote: It does not work this way Guy! I am also in trouble with the delimiter as I have used space between name and QTH. I have been trying to find way to export the log to change the delimiter but it is impossible with DXQ-QXN export-import because the Notes for This Call gets doubled! Meaning the old values are not replaced whatever you do but anything you import on top of them are added with /. Even if you export your log, delete ALL QSOs after that and import all the QSOs back then your Notes for This Call get multiplied by two with / in between. Crazy. And it is not possible to open a new log file (thus getting rid of the old Notes... data) and import all QSOs there because then you also lose all the Groups list. Thus as far as I have no idea how do change delimiter automatically in ADIF file with my domestic tools like excel etc I don't see any way to accomplish this task without the program being modified to let the user choose the delimiter, better yet logic similar to Excel Text to Columns. What I really need is to be able to split at the first space. As there are often spaces in QTH description (like near Rome or alike). 73 Tonno ES5TV -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of ON4AOI Sent: Tuesday, August 04, 2009 6:27 PM To: 'Mel' Cc: dx4win@mailman.qth.net Subject: Re: [Dx4win] Ver 8.01 issues Thats normally fixed in a few minutes In version 7 Export your log DX4WIN6 THE *.DXN file contains the name and qth, change the delimiter with textpad or similar to IN Save and import Guy ON4AOI -Oorspronkelijk bericht- Van: Mel [mailto:ve...@videotron.ca] Verzonden: dinsdag 4 augustus 2009 17:18 Aan: ON4AOI Onderwerp: Re: [Dx4win] Ver 8.01 issues very nice... but I have 25,000 QSOs not formatted that way Guy ;-) ON4AOI wrote: Mel and others The delimiter in or IN works perfect So MEL IN STE-MARTINE works 100 % And will populate Name = MEL and QTH= STE-MARTINE When you do multiple QSO´s operations - Set Name and Qth Guy ON4AOI -Oorspronkelijk bericht- Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- boun...@mailman.qth.net] Namens Mel Verzonden: dinsdag 4 augustus 2009 17:07 Aan: David, K2DBK CC: DX4WIN Onderwerp: Re: [Dx4win] Ver 8.01 issues I would suggest that you not use DX4Win to populate the name and QTH fields then. If Paul doesn't allow a specified delimiter (, or | or in) then either Jim will modify one of his programs or I will write a new one. I already have a program than could do this (To recognize a , as well as | is a one line change) but it works with ADIF which doesn't preserve LotW status for example. I used it to transfer DX4Win data to another logger I was testing (D4W was better). Jim's programs work with DXQ which is preferable... so I'm hoping that he might hack one of his programs if we ask him really nicely ;-) Mel...VE2DC David, K2DBK wrote: I'd been using , (such as David, River Vale) but I can live with it. I suppose the optimal solution would be to have the user specify the delimiter, but if I really feel the need I can export my log, massage the data, and re-import it. I'm just happy to have the new version out, and am anxiously awaiting my version 8 key. :-) Mel wrote: Perhaps he could also delimit on |... I don't believe I am the only one using this convention. re MFSK ... conversion to MFSK16 should be OK as I don't think MFSK8 is used a lot not really an issue here as I can change the few QSOS involved manually in less time than it took me to complain about it ;-) I exported in DX4Win ver 6.03 format. I'll send you the file if you like Jim. Maybe you could make your program QSX Name fix... I already wrote a program to do this and it works fine... but it works on the ADIF file. If I export/import ADIF I will lose information. I will send file direct. Jim Reisert AD1C wrote: Regarding name, etc. If you read the on-line help, you'll see that DX4WIN looks
Re: [Dx4win] Use of F8 problem.
Dear Mel, that problem is given as in our setting in the number notation is comma and not a separator as informed me Paul KK4HD. Milos, OK1MP ??? F8 works fine with the new version. There is no difference between a new QSO and an old QSO. Did you open the correct file? Ing. Milo? Prosteck? wrote: After upgrading to 8.01 it is not possible to find new calls by F8 key which was add to log. What is wrong? All old contact are correct. 73, Milos, OK1MP No virus found in this outgoing message. Checked by AVG - www.avg.com Version: 8.5.406 / Virus Database: 270.13.47/2289 - Release Date: 08/07/09 18:37:00 __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Same station different operators and changed QTH
I have a problem and it is not new for version 8.01. I am QSL manager for a scout station and we work a lot of scout stations. They could have different operators and change QTH from year to year. For example, SK0XA. 1969 Lasse Stockholm 1972 Bengt Farsta 1975 Sten Huddinge 1984 Marie Farsta Operator changes are common with other club stations too and there are some examples of reissued old call signs. People move and change QTH but keep their callsign. If I add a new operator and a new QTH to an existing the new one overwrites the old. Is it possible to make the program suggest the old Name and QTH but if changed the old is still kept with the old contacts and the new is saved with the new name and QTH? If then the station is worked again the new operator and QTH will be suggested. Thanks for a very interesting update Mel - SM0MPV 8S0C - Contest Call _ Jag använder en gratisversion av SPAMfighter för privata användare. 367 spam har blivit blockerade hittills. Betalande användare har inte detta meddelande i sin e-post. Hämta gratis SPAMfighter http://www.spamfighter.com/lsv idag! __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DX cluster hookup?
One workaround could be to integrate the VE7CC module into DX4Win ? I imagine the same way that you call up Buckmaster or whatever - fire up an executable that is VE7CC ?? Just automate the workaround ! 73 Dave G3NKC -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]on Behalf Of Jim Reisert AD1C Sent: 08 August 2009 21:54 To: N8NN Cc: DX4WIN Subject: Re: [Dx4win] DX cluster hookup? On Sat, Aug 8, 2009 at 12:15 PM, N8NNn...@earthlink.net wrote: Starting the cluster in DX4WIN is a chore that shouldn't have remained for so many years. Apparently the DX cluster facility in DX4WIN is a very low priority. Paul tried to do something shortly before 8.01 was released, but ran into a programming issue he could not solve. If you use the VE7CC user program between DX4WIN and your cluster node, then you don't even have to type in the callsign when connecting DX4WIN to the cluster. Plus the VE7CC program will do auto-reconnect if the connection is lost. -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Ver 8.01 issues
I have ca 200 groups:) for every contest. Looks like we have to wait indeed:) tonno -Original Message- From: Mel [mailto:ve...@videotron.ca] Sent: Sunday, August 09, 2009 12:31 AM To: Tonno Vahk Cc: dx4win@mailman.qth.net Subject: Re: [Dx4win] Ver 8.01 issues Can you re-assign the groups? I was able to do that because I only a few groups that I could re-select and set by date. Perhaps your situation is more complex. I also ran into Cesar'a issue of Invalid QSOs not being flagged after conversion... might another small thing Paul overlooked. Again, in my case, I just listed them in V7 and set them manually. Just a few dozen. The smart thing to do is wait about a month to upgrade... but who wants to wait ;-) Tonno Vahk wrote: Mel, that is what I am saying - in that case it does not double but I cannot use it because importing into new empty log file does not bring the Groups along. All the Groups are missing and I don't know how to get them to come along from the old file. They are the same kind of hidden info like Notes for This Call. You have both or you have neither it seems... -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Mel Sent: Saturday, August 08, 2009 11:19 PM Cc: dx4win@mailman.qth.net Subject: Re: [Dx4win] Ver 8.01 issues When you re-import you log into an empty file from a DXQ/DXN set... it should not double up... I tried Guy's solution also. I had been using | as a separator... but I also had many records with 3 fields... result was a 6 solid hours of fixup... not something I ever want to do again! Tonno Vahk wrote: It does not work this way Guy! I am also in trouble with the delimiter as I have used space between name and QTH. I have been trying to find way to export the log to change the delimiter but it is impossible with DXQ-QXN export-import because the Notes for This Call gets doubled! Meaning the old values are not replaced whatever you do but anything you import on top of them are added with /. Even if you export your log, delete ALL QSOs after that and import all the QSOs back then your Notes for This Call get multiplied by two with / in between. Crazy. And it is not possible to open a new log file (thus getting rid of the old Notes... data) and import all QSOs there because then you also lose all the Groups list. Thus as far as I have no idea how do change delimiter automatically in ADIF file with my domestic tools like excel etc I don't see any way to accomplish this task without the program being modified to let the user choose the delimiter, better yet logic similar to Excel Text to Columns. What I really need is to be able to split at the first space. As there are often spaces in QTH description (like near Rome or alike). 73 Tonno ES5TV -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of ON4AOI Sent: Tuesday, August 04, 2009 6:27 PM To: 'Mel' Cc: dx4win@mailman.qth.net Subject: Re: [Dx4win] Ver 8.01 issues Thats normally fixed in a few minutes In version 7 Export your log DX4WIN6 THE *.DXN file contains the name and qth, change the delimiter with textpad or similar to IN Save and import Guy ON4AOI -Oorspronkelijk bericht- Van: Mel [mailto:ve...@videotron.ca] Verzonden: dinsdag 4 augustus 2009 17:18 Aan: ON4AOI Onderwerp: Re: [Dx4win] Ver 8.01 issues very nice... but I have 25,000 QSOs not formatted that way Guy ;-) ON4AOI wrote: Mel and others The delimiter in or IN works perfect So MEL IN STE-MARTINE works 100 % And will populate Name = MEL and QTH= STE-MARTINE When you do multiple QSO´s operations - Set Name and Qth Guy ON4AOI -Oorspronkelijk bericht- Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- boun...@mailman.qth.net] Namens Mel Verzonden: dinsdag 4 augustus 2009 17:07 Aan: David, K2DBK CC: DX4WIN Onderwerp: Re: [Dx4win] Ver 8.01 issues I would suggest that you not use DX4Win to populate the name and QTH fields then. If Paul doesn't allow a specified delimiter (, or | or in) then either Jim will modify one of his programs or I will write a new one. I already have a program than could do this (To recognize a , as well as | is a one line change) but it works with ADIF which doesn't preserve LotW status for example. I used it to transfer DX4Win data to another logger I was testing (D4W was better). Jim's programs work with DXQ which is preferable... so I'm hoping that he might hack one of his programs if we ask him really nicely ;-) Mel...VE2DC David, K2DBK wrote: I'd been using , (such as David, River Vale) but I can live with it. I suppose the optimal solution would be to have the user specify the delimiter, but if I really feel the need I can export my log, massage the data, and re-import it. I'm just happy to have the new version out, and am anxiously
Re: [Dx4win] Same station different operators and changed QTH
I can't speak for Paul... but the problem you identify is actually one of DX4Win's strengths... All the information is in one place. If you correct one occurrence, you correct them all. I would hate him to change that. What I do... and it works for me... If it is just a matter of recording the operator... I put Club or DXped or Spcl Envt in name depending on what is most appropriate... I put Op-name in the QSO Notes (Not Call Notes) In the situation where QTH is also variable... I think that's less common... also put QTH-location in the QSO notes. Just to review... Call notes (and now Name and QTH) are linked to a unique callsign... you change one and you have changed them all. QSO notes are unique to each Contact. Also, don't forget Ctrl-E opens up both notes into a multi-line memo... so you can store a lot of info. ...Mel The other situation I encounter... since I've been at this a while is the re-assigned call problem. In this case I put the Historical info into the CALL Notes (Not QSO Notes) and the new name and QTH in the appropriate fields. This instantly update ALL references to the same call. Claes Mel Carneheim wrote: I have a problem and it is not new for version 8.01. I am QSL manager for a scout station and we work a lot of scout stations. They could have different operators and change QTH from year to year. For example, SK0XA. 1969 Lasse Stockholm 1972 Bengt Farsta 1975 Sten Huddinge 1984 Marie Farsta Operator changes are common with other club stations too and there are some examples of reissued old call signs. People move and change QTH but keep their callsign. If I add a new operator and a new QTH to an existing the new one overwrites the old. Is it possible to make the program suggest the old Name and QTH but if changed the old is still kept with the old contacts and the new is saved with the new name and QTH? If then the station is worked again the new operator and QTH will be suggested. Thanks for a very interesting update Mel - SM0MPV 8S0C - Contest Call _ Jag använder en gratisversion av SPAMfighter för privata användare. 367 spam har blivit blockerade hittills. Betalande användare har inte detta meddelande i sin e-post. Hämta gratis SPAMfighter http://www.spamfighter.com/lsv idag! __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Ver 8.01 issues
That's about 195 more than I had... I see your problem ;-) For now... just convert your existing file and take care of the extracting names and frequencies when Paul has had a chance to refine the extraction process. ...Mel, VE2DC Tonno Vahk wrote: I have ca 200 groups:) for every contest. Looks like we have to wait indeed:) tonno -Original Message- From: Mel [mailto:ve...@videotron.ca] Sent: Sunday, August 09, 2009 12:31 AM To: Tonno Vahk Cc: dx4win@mailman.qth.net Subject: Re: [Dx4win] Ver 8.01 issues Can you re-assign the groups? I was able to do that because I only a few groups that I could re-select and set by date. Perhaps your situation is more complex. I also ran into Cesar'a issue of Invalid QSOs not being flagged after conversion... might another small thing Paul overlooked. Again, in my case, I just listed them in V7 and set them manually. Just a few dozen. The smart thing to do is wait about a month to upgrade... but who wants to wait ;-) Tonno Vahk wrote: Mel, that is what I am saying - in that case it does not double but I cannot use it because importing into new empty log file does not bring the Groups along. All the Groups are missing and I don't know how to get them to come along from the old file. They are the same kind of hidden info like Notes for This Call. You have both or you have neither it seems... -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Mel Sent: Saturday, August 08, 2009 11:19 PM Cc: dx4win@mailman.qth.net Subject: Re: [Dx4win] Ver 8.01 issues When you re-import you log into an empty file from a DXQ/DXN set... it should not double up... I tried Guy's solution also. I had been using | as a separator... but I also had many records with 3 fields... result was a 6 solid hours of fixup... not something I ever want to do again! Tonno Vahk wrote: It does not work this way Guy! I am also in trouble with the delimiter as I have used space between name and QTH. I have been trying to find way to export the log to change the delimiter but it is impossible with DXQ-QXN export-import because the Notes for This Call gets doubled! Meaning the old values are not replaced whatever you do but anything you import on top of them are added with /. Even if you export your log, delete ALL QSOs after that and import all the QSOs back then your Notes for This Call get multiplied by two with / in between. Crazy. And it is not possible to open a new log file (thus getting rid of the old Notes... data) and import all QSOs there because then you also lose all the Groups list. Thus as far as I have no idea how do change delimiter automatically in ADIF file with my domestic tools like excel etc I don't see any way to accomplish this task without the program being modified to let the user choose the delimiter, better yet logic similar to Excel Text to Columns. What I really need is to be able to split at the first space. As there are often spaces in QTH description (like near Rome or alike). 73 Tonno ES5TV -Original Message- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of ON4AOI Sent: Tuesday, August 04, 2009 6:27 PM To: 'Mel' Cc: dx4win@mailman.qth.net Subject: Re: [Dx4win] Ver 8.01 issues Thats normally fixed in a few minutes In version 7 Export your log DX4WIN6 THE *.DXN file contains the name and qth, change the delimiter with textpad or similar to IN Save and import Guy ON4AOI -Oorspronkelijk bericht- Van: Mel [mailto:ve...@videotron.ca] Verzonden: dinsdag 4 augustus 2009 17:18 Aan: ON4AOI Onderwerp: Re: [Dx4win] Ver 8.01 issues very nice... but I have 25,000 QSOs not formatted that way Guy ;-) ON4AOI wrote: Mel and others The delimiter in or IN works perfect So MEL IN STE-MARTINE works 100 % And will populate Name = MEL and QTH= STE-MARTINE When you do multiple QSO´s operations - Set Name and Qth Guy ON4AOI -Oorspronkelijk bericht- Van: dx4win-boun...@mailman.qth.net [mailto:dx4win- boun...@mailman.qth.net] Namens Mel Verzonden: dinsdag 4 augustus 2009 17:07 Aan: David, K2DBK CC: DX4WIN Onderwerp: Re: [Dx4win] Ver 8.01 issues I would suggest that you not use DX4Win to populate the name and QTH fields then. If Paul doesn't allow a specified delimiter (, or | or in) then either Jim will modify one of his programs or I will write a new one. I already have a program than could do this (To recognize a , as well as | is a one line change) but it works with ADIF which doesn't preserve LotW status for example. I used it to transfer DX4Win data to another logger I was testing (D4W was better). Jim's programs work with DXQ which is preferable... so I'm hoping that he might hack one of his programs if we ask him really nicely ;-) Mel...VE2DC David, K2DBK wrote: I'd been using , (such as
[Dx4win] 8.01 Group Selection - Date Filter
Under version 7 the Group Selection for a specific date range worked as: Group Selection Filter - Selection Click on the Add button, change the name, enter the start/end dates, click the Date Filter box, then Update, then OK. Now, under version 8.01, I can't get any further than 'change the name', I am Unable to enter start/end dates. Anyone else experience this? What I am ultimately trying to do is just export part of the log as ADIF for a specific date period. Steve GW4BLE __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] 8.01 Group Selection - Date Filter
Same as ver 7. You have to set Range in Preferences - QSO - Searching- QSO Date Steve GW4BLE wrote: Under version 7 the Group Selection for a specific date range worked as: Group Selection Filter - Selection Click on the Add button, change the name, enter the start/end dates, click the Date Filter box, then Update, then OK. Now, under version 8.01, I can't get any further than 'change the name', I am Unable to enter start/end dates. Anyone else experience this? What I am ultimately trying to do is just export part of the log as ADIF for a specific date period. Steve GW4BLE __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] 8.01 Group Selection - Date Filter
Mel, Could you just explain that please. I haven't changed anything in my Ini file from version 7 - i guess that's what you refer to ? Thanks. -Original Message- From: Mel [mailto:ve...@videotron.ca] Sent: 08 August 2009 23:44 To: Steve GW4BLE Cc: dx4win@mailman.qth.net Subject: Re: [Dx4win] 8.01 Group Selection - Date Filter Same as ver 7. You have to set Range in Preferences - QSO - Searching- QSO Date Steve GW4BLE wrote: Under version 7 the Group Selection for a specific date range worked as: Group Selection Filter - Selection Click on the Add button, change the name, enter the start/end dates, click the Date Filter box, then Update, then OK. Now, under version 8.01, I can't get any further than 'change the name', I am Unable to enter start/end dates. Anyone else experience this? What I am ultimately trying to do is just export part of the log as ADIF for a specific date period. Steve GW4BLE __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] 8.01 Group Selection - Date Filter
BTW... you are right. There does seem to be a problem creating permanent reusable filters. Steve GW4BLE wrote: Mel, Could you just explain that please. I haven't changed anything in my Ini file from version 7 - i guess that's what you refer to ? Thanks. -Original Message- From: Mel [mailto:ve...@videotron.ca] Sent: 08 August 2009 23:44 To: Steve GW4BLE Cc: dx4win@mailman.qth.net Subject: Re: [Dx4win] 8.01 Group Selection - Date Filter Same as ver 7. You have to set Range in Preferences - QSO - Searching- QSO Date Steve GW4BLE wrote: Under version 7 the Group Selection for a specific date range worked as: Group Selection Filter - Selection Click on the Add button, change the name, enter the start/end dates, click the Date Filter box, then Update, then OK. Now, under version 8.01, I can't get any further than 'change the name', I am Unable to enter start/end dates. Anyone else experience this? What I am ultimately trying to do is just export part of the log as ADIF for a specific date period. Steve GW4BLE __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] 60 Meters in Version 8.01
Finally got around to installing v 8.01 today. A bit more painful than most upgrades of DX4WIN for some reason. Guess I will need to look through the archives for some of my issues, but one I do not recall being mentioned so far: is anyone else having problems displaying 60 meter status in the WAZ and Country windows? It's also not in the Reports. I have 60m checked in the Station tab of the Preferences. Not sure what I am missing. Some strange things with the CW totals, too, but I haven't dug into that enough to ask an intelligent question. Larry Burke K5RK Brazoria County Texas __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] WPX window and WAS window
Hello all Does anyone use the WPX window or WAS window ? I haven't seen any posts on this about 8.01. I find that 1.the band box is no longer changing with incoming spots in the WAS window and data is not appearing as to what Ive worked. Also WAS = shows nothing in the title bar. 2. the WPX data is not appearing either though the band box does shift around with spots coming in. Also WPX= shows nothing in the title bar. A new spot comes in and where 6 and 7 automatically looked up where I had it worked and confirmed, it shows all the boxes for band and mode with nothing in them. I reinstalled 7.07.02 and it works properly. While this is going on, DXCC , WAZ and Field windows are working fine. The WPX colors in the spot window are fine in 8.01. Thanks -- Matt __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] DX cluster hookup?
I run a simple macro that requires one click to log into a cluster. It would be more elegant for DX4Win to do it. Howard..K2HK HK There is no way to do an automatic connect. You still have to enter your call. Please see the section called Tips here: http://dx4win.ad1c.us/cluster/index.htm#tips 73 - Jim AD1C __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] WPX window and WAS window
Normally I just display DXCC, Zone and VUCC and they work fine. I checked it here and I confirm what you have noted... WPX and State don't display based on Spot info. Mel Matt Cassarino wrote: Hello all Does anyone use the WPX window or WAS window ? I haven't seen any posts on this about 8.01. I find that 1.the band box is no longer changing with incoming spots in the WAS window and data is not appearing as to what Ive worked. Also WAS = shows nothing in the title bar. 2. the WPX data is not appearing either though the band box does shift around with spots coming in. Also WPX= shows nothing in the title bar. A new spot comes in and where 6 and 7 automatically looked up where I had it worked and confirmed, it shows all the boxes for band and mode with nothing in them. I reinstalled 7.07.02 and it works properly. While this is going on, DXCC , WAZ and Field windows are working fine. The WPX colors in the spot window are fine in 8.01. Thanks __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] 60 Meters in Version 8.01
Larry, 60M is disabled in the awrds (File | Awards | Select WAZ tab) (I don't think you can submit 60M for WAZ) --Paul Larry Burke wrote: Finally got around to installing v 8.01 today. A bit more painful than most upgrades of DX4WIN for some reason. Guess I will need to look through the archives for some of my issues, but one I do not recall being mentioned so far: is anyone else having problems displaying 60 meter status in the WAZ and Country windows? It's also not in the Reports. I have 60m checked in the Station tab of the Preferences. Not sure what I am missing. Some strange things with the CW totals, too, but I haven't dug into that enough to ask an intelligent question. Larry Burke K5RK Brazoria County Texas __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.392 / Virus Database: 270.13.47/2290 - Release Date: 08/08/09 06:10:00 __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Minor skin bug
Follow radio checkbox text not readable with MacOS and ITunes skins... Vista -- 96 dpi (default) - 1920x1200 resolution. mel, VE2DC __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] WPX window and WAS window
How can DX4WIN determine states from incoming spots, when there is no indication as to the state of the spotted station? I can confirm that WPX is not being updated. 73 - Jim AD1C On Sat, Aug 8, 2009 at 7:00 PM, Matt Cassarinow...@yccc.org wrote: Hello all Does anyone use the WPX window or WAS window ? I haven't seen any posts on this about 8.01. I find that 1.the band box is no longer changing with incoming spots in the WAS window and data is not appearing as to what Ive worked. Also WAS = shows nothing in the title bar. 2. the WPX data is not appearing either though the band box does shift around with spots coming in. Also WPX= shows nothing in the title bar. A new spot comes in and where 6 and 7 automatically looked up where I had it worked and confirmed, it shows all the boxes for band and mode with nothing in them. I reinstalled 7.07.02 and it works properly. While this is going on, DXCC , WAZ and Field windows are working fine. The WPX colors in the spot window are fine in 8.01. Thanks -- Matt __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] WPX window and WAS window
Matt, Found and fixed the WPX update problem; thanks for sending me the screen shots etc. --Paul Matt Cassarino wrote: Hello all Does anyone use the WPX window or WAS window ? I haven't seen any posts on this about 8.01. I find that 1.the band box is no longer changing with incoming spots in the WAS window and data is not appearing as to what Ive worked. Also WAS = shows nothing in the title bar. 2. the WPX data is not appearing either though the band box does shift around with spots coming in. Also WPX= shows nothing in the title bar. A new spot comes in and where 6 and 7 automatically looked up where I had it worked and confirmed, it shows all the boxes for band and mode with nothing in them. I reinstalled 7.07.02 and it works properly. While this is going on, DXCC , WAZ and Field windows are working fine. The WPX colors in the spot window are fine in 8.01. Thanks No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.392 / Virus Database: 270.13.47/2290 - Release Date: 08/08/09 06:10:00 __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Minor skin bug
Mel, Found and fixed, --Paul Mel wrote: Follow radio checkbox text not readable with MacOS and ITunes skins... Vista -- 96 dpi (default) - 1920x1200 resolution. mel, VE2DC __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.392 / Virus Database: 270.13.47/2290 - Release Date: 08/08/09 06:10:00 __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] WPX window and WAS window
My previous message may have been misleading; the WAS cannot update based on packet info, but should adjust the location of the band/mode selector. --Paul Matt Cassarino wrote: Hello all Does anyone use the WPX window or WAS window ? I haven't seen any posts on this about 8.01. I find that 1.the band box is no longer changing with incoming spots in the WAS window and data is not appearing as to what Ive worked. Also WAS = shows nothing in the title bar. 2. the WPX data is not appearing either though the band box does shift around with spots coming in. Also WPX= shows nothing in the title bar. A new spot comes in and where 6 and 7 automatically looked up where I had it worked and confirmed, it shows all the boxes for band and mode with nothing in them. I reinstalled 7.07.02 and it works properly. While this is going on, DXCC , WAZ and Field windows are working fine. The WPX colors in the spot window are fine in 8.01. Thanks No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.392 / Virus Database: 270.13.47/2290 - Release Date: 08/08/09 06:10:00 __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] WPX window and WAS window
Yes, I correct my message as well. The box does move in 7.07, but DX4WIN can't determine the state. I tried spotting both a previous QSO from my log (so DX4WIN would already know the state), and putting the state in the comments field. In either case, the title bar of the window did not name the state. Perhaps an improvement for some future version would be to cross-check the spotted station against the log, and try to determine the state, county, grid and IOTA, even if those are not in the spot itself. - Jim On Sat, Aug 8, 2009 at 10:39 PM, Paul van der Eijkpvandere...@cox.net wrote: My previous message may have been misleading; the WAS cannot update based on packet info, but should adjust the location of the band/mode selector. --Paul Matt Cassarino wrote: Hello all Does anyone use the WPX window or WAS window ? I haven't seen any posts on this about 8.01. I find that 1.the band box is no longer changing with incoming spots in the WAS window and data is not appearing as to what Ive worked. Also WAS = shows nothing in the title bar. 2. the WPX data is not appearing either though the band box does shift around with spots coming in. Also WPX= shows nothing in the title bar. A new spot comes in and where 6 and 7 automatically looked up where I had it worked and confirmed, it shows all the boxes for band and mode with nothing in them. I reinstalled 7.07.02 and it works properly. While this is going on, DXCC , WAZ and Field windows are working fine. The WPX colors in the spot window are fine in 8.01. Thanks -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Update QSO Button
Hamad, Thanks for reporting this; its fixed. --Paul PS I'm picking the 'easy' ones first :) Hamad 9K2HN wrote: Hi, I have just found that when you click on Update QSO Button located in external data window (RAC 2009 Summer) the name goes to the notes (like the earlier versions) instead of the name field. I use this button a lot during US pile-up's. de 9k2hn Hamad __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.392 / Virus Database: 270.13.47/2290 - Release Date: 08/08/09 06:10:00 __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html