Whenever upgrading, I merge the .ini file from the previous version to the new
version.
However I found new log entries were going to the .dxl file located in the
previous version folder and not to the
upgraded version.
As a work around, I uninstall and then reinstall the new version and not
I'm trying to setup PSK31 using DX4WIN Version 7.07.02.
When I hit the TX button I hear the tones but the K3 does not go into transmit.
DX4WIN works perfectly in both MMTTY and CW. It keys and sends in both of those
modes.
What do I need to do to get DX4WIN PSK31 to key the K3?
73,
Bud W3LL
Guy
-Oorspronkelijk bericht-
Van: Bud Governale, W3LL [mailto:w...@arrl.net]
Verzonden: zaterdag 8 augustus 2009 15:58
Aan: ON4AOI
Onderwerp: Re: [Dx4win] PSK31 Won't Key K3
Guy,
Thanks for the suggestion.
The PSK31 com port was set on VOX. I changed it to the radio com port
itself and PSK31 to
use
the same radio port.
Does anybody have PSK31 working with the K3 radio?
If so, what am I doing wrong.
Help please from anybody.
73,
Bud W3LL
w...@arrl.net
- Original Message -
From: Bud Governale, W3LL w...@arrl.net
To: dx4win@mailman.qth.net
Sent: Saturday
Here's what I did to see my county summary spreadsheet in Version 8.02:
ReportsawardcountyReport Action = SummaryAll ModesAll BandsMixed, Mode,
Band checked
Click on green checked OK button and get:
Access violation at address 00402D42 in module dx4win.exe. Read of address
.
I then get
I want to upload to eQSL.
When I select Set Upload Flag, I'm asked if I want to upload 65,409 QSL's.
I don't. I only want to upload less than 10K at a time.
I activate an F8 filter and put 01/01/1901 into the eQSL upload date and see
65409 QSO's listed as expected.
When I try to limit this to a
I'm getting ready to do a CQ DX Field Submission using V8.02
Since there are separate awards for Mixed, Phone, Digital and certain selected
bands, I put a check mark in Mixed, Band
and Mode in the CQ Field Award choices.
The Submission printouts for Mixed, Phone, Digital, 10M, 40M and 80M are
I expanded the QSO window using F5.
I have grid AH confirmed QSO's for SSB, Digital, and 10M.
I next made sure there were no award flags for any grid AH QSO - used F8 to
sort this.
I put S in the mode box for 5W0TR, a 15m ssb contact.
I put S in the band box for K8T, a 10M SSB contact.
I put
DX4WIN V 8.02 is consistently choosing the oldest QSL to confirm in a listing.
I opened Reports WPX Listing. I want to QSL all the Digital W's (Worked)
that I could find.
Here's an example. I click on a W in the WPX Listing.
The entry window shows the QSO.
I flag it for QSL direct.
I happen
...@alum.mit.edu
To: Bud Governale, W3LL w...@arrl.net
Cc: dx4win@mailman.qth.net
Sent: Thursday, November 12, 2009 8:11 PM
Subject: Re: [Dx4win] WPX QSL's Oldest Confirmed
On Thu, Nov 12, 2009 at 5:57 PM, Bud Governale, W3LL w...@arrl.net wrote:
DX4WIN V 8.02 is consistently choosing the oldest QSL
I completed a CQ Field Mixed Submission in V8.03
When I then try to do a PHO or DIG submission no QSO's are listed.
What am I doing wrong?
73,
Bud W3LL
w...@arrl.net
__
Dx4win mailing list
Home:
Governale, W3LL w...@arrl.net
Cc: dx4win@mailman.qth.net
Sent: Thursday, December 24, 2009 1:45 AM
Subject: Re: [Dx4win] CQ DX Field Submission
On Wed, Dec 23, 2009 at 6:01 PM, Bud Governale, W3LL w...@arrl.net wrote:
I completed a CQ Field Mixed Submission in V8.03
When I then try to do a PHO
Don't know what I did but all spots have been coming in grayed out.
Using version 8.04.
Bands, Modes, and Mode Groups are properly checked in Preferences Station Tab
Band/Mode not conf is checked in Preferences Packet 1
Packet 2 has not been changed
Packet 3 has all Bands and Modes checked
and merge in my .INI settings that I had saved
prior to the problem. I would not trust writing the .INI file
post-problem then merging into empty CFG file.
- Jim
On Fri, May 21, 2010 at 8:55 AM, Bud Governale, W3LL w...@arrl.net wrote:
Don't know what I did but all spots have been coming
I'm trying to get DX4WIN to key MMTTY on my IC-7000.
When clicking on a DX4WIN macro RTTY button, I can hear the tones playing but
the Icom IC-7000 is not being keyed.
I have the path to the MMTTY executable set in the DX4WIN RTTY preference
window.
I can open the MMTTY program and send RTTY
- Original Message -
From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: Bud Governale, W3LL w...@arrl.net
Cc: dx4win@mailman.qth.net
Sent: Saturday, June 19, 2010 1:16 AM
Subject: Re: [Dx4win] Keying MMTTY
Bud, have you read the MMTTY application note:
http://dx4win.ad1c.us/
If you
I saw the following statement when I uploaded QSO's to eQSL.
Is DX4WIN in compliance with the spec?
Logger not compliant with ADIF V2.1.9 specs due to invalid mode(s)
Logger identified as: DX4WIN
__
Dx4win mailing list
Home:
- Original Message -
From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: Bud Governale, W3LL w...@arrl.net
Cc: dx4win@mailman.qth.net
Sent: Sunday, August 22, 2010 9:49 PM
Subject: Re: [Dx4win] ADIF V2.19
On 8/22/2010 4:40 PM, Bud Governale, W3LL wrote:
I saw the following statement when I
Jim found the source of the ADIF problem.
It was NOT related to a fault in DX4WIN.
The source of the ADIF issue was the pass-thru program I used to automatically
populate grid, state, county, address,
etc. by looking up the information from QRZ.COM and saving a lot of tedious
work.
73,
Bud
Where is the spotted station in the audio passband spectrum window when I click
on a PSK-31 spot?
How do I find it amongst many other stations within the audio passband?
K3 radio is set to USB or PSK-D mode.
73,
Bud W3LL
w...@arrl.net
I ran DX4WLOTW and received three mismatches.
All three are marked X for LOTW and marked C for DX4WIN.
I've been unable to get the C's changed to X's. (Confirmed changed to Checked).
How do I do this?
73,
Bud W3LL
w...@arrl.net
__
ReportsWPXLISTING:
2D0 is listed as confirmed C for both Mixed and Phone.
When I click on either C I get a message saying: No matching QSO found
How do I fix this problem?
73,
Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home:
I uploaded to eQSL DX4WIN logbook contacts from the 160M SSB contest. DX4WIN
asked if I wanted to upload 496 contacts.
That was the correct number of contacts made so I said yes. I have the
generated .adi file which was uploaded to eQSL. A
few days after the contest I downloaded the eQSL
I like this easier method.
However, I looked all over but can't find where to set preferences to always
set the eQSL flag for new QSOs.
Also can this be setup for LOTW? Where?
73,
Bud W3LL
- Original Message -
From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: Bud Governale, W3LL w
All spots are now showing up grayed out.
Verified those that should not be grayed out are showing up in gray.
Preferences match DX4WIN running on other computers here with no grayed out
issues.
I haven't make any changes.
Been working properly with spot colors over the last few years.
Using V
Thanks Jim. That solved the problem.
I was in the Dayton Contest Dinner audience to see your induction into the CQ
Hall Of Fame.
Well deserved!
73,
Bud W3LL
- Original Message -
From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: Bud Governale, W3LL w...@arrl.net
Cc: dx4win
JT65 imports as RTTY – OK
FT8 imports to SSB - Not OK.
How do I fix this prior to making the import so that FT8 imports as RTTY?
73,
Bud W3LL
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help:
I imported the WSJT-X adi file containing my first QSO into DX4WIN. It went
perfectly. The DX4WIN log shows mode JT65. Perfect.
The WSJT-X adi file now has three qso’s including the first one.
DX4WIN rejected the import because of the one duplicate QSO.
How do I set DX4WIN to accept all
Hi Dan,
That worked. Didn't know that window had a dropdown.
Thanks!!
73,
Bud W3LL
-Original Message-
From: Dan Violette
Sent: Tuesday, July 04, 2017 9:23 PM
To: 'Bud Governale, W3LL' ; dx4win@mailman.qth.net
Subject: RE: [Dx4win] ADI Import Having Duplicates Rejected
Check
Hi Mike,
Nice hearing from you!!
That worked. Didn't know that window had a dropdown.
Thanks!!
73,
Bud W3LL
-Original Message-
From: Mike Cizek W0VTT
Sent: Tuesday, July 04, 2017 9:24 PM
To: 'Bud Governale, W3LL' ; dx4win@mailman.qth.net
Subject: RE: [Dx4win] ADI Import Having
My entry window is smaller in version 9.
Example: 3-1/2” wide by 4” high in Ver. 9.0.1
and 4-1/2” wide by 4” high in Ver. 8.05
All my other windows opened in their correct positions and size.
How do I fix this?
73,
Bud W3LL
w...@arrl.net
Each time I start 9.0.1 I get an error message:
Master file:
C\dx4w901\save\mstcals.dat
not found, no calls loaded.
How do I fix this?
73,
Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home:
In prior versions I always entered a callsign and pressed F8 to see logged
QSO’s with a specific station.
Now I get “not in the log”. Yet I find the callsign by scrolling the log and
finding the QSO’s I’m looking for.
What changed or what am I now doing wrong?
73,
Bud W3LL
w...@arrl.net
Reports>WAS
The last entry right after WY Wyoming is #1 in the St state column and W in the
State name column.
MIX, PHO, DIG, 160 and 80 columns each have a W in them.
Each W when clicked opens up to report in the entry window.
How does this erroneous State get fixed?
73,
Bud W3LL
Does V9 IOTA CHECK scan my logbook and enter the appropriate IOTA’s to those
that are missing from an appropriate DXCC entry?
Can I then go to REPORTS and send out QSL confirmations for all those with a W
added to the report?
73,
Bud W3LL
w...@arrl.net
-Original Message-
From: Jim Reisert AD1C
Sent: Monday, October 30, 2017 9:15 AM
To: Bud Governale, W3LL
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] Check IOTA
On Sun, Oct 29, 2017 at 4:20 PM, Bud Governale, W3LL asked:
Does V9 IOTA CHECK scan my logbook and enter the appropriate IOTA’s to
those
I switched from using the Flying Horse CD Rom in V8 to using QRZ.Com in V9.
I entered my user name and password in Preferences..
I’m now missing the street address line when using QRZ.COM with F3.
What do I need to do?
73,
Bud W3LL
w...@arrl.net
Message-
From: Mike Cizek W0VTT
Sent: Sunday, October 29, 2017 6:11 PM
To: 'Bud Governale, W3LL' ; dx4win@mailman.qth.net
Subject: RE: [Dx4win] QRZ.COM - Callsign Lookup Street Address Missing
Hello Bud,
You need to log in to QRZ first.
--
73,
Mike Cizek WØVTT
-Original Message
It's now working.
I needed a QRZ.COM renewal XML subscription.
73,
Bud W3LL
-Original Message-
From: Mike Cizek W0VTT
Sent: Sunday, October 29, 2017 6:11 PM
To: 'Bud Governale, W3LL' ; dx4win@mailman.qth.net
Subject: RE: [Dx4win] QRZ.COM - Callsign Lookup Street Address Missing
I imported my WSJT-X .adi file into V9.
Next I did a F8 search with FT8 entered in the Mode box.
The result was “No matching QSO’s Found”.
I looked at the WSJT-X log. It consisted of 434 FT8 QSO’s.
Why none found in the search?
What am I doing wrong?
73,
Bud W3LL
w...@arrl.net
It's now working.
Maybe a first time try glitch.
73,
Bud W3LL
-Original Message-
From: David Kozinn, K2DBK
Sent: Sunday, October 29, 2017 8:12 PM
To: Bud Governale, W3LL ; dx4win@mailman.qth.net
Subject: Re: [Dx4win] FT8 Mode Search
First, what option did you use on the Import
I can’t find adif.pmp file in dx4w805\SAVE\adif.pmp
I found it in a 2014 unzipped cty. file.
I copied it and pasted adif.pmp into dx4win\save directory.
Is this the correct thing to do?
73,
Bud W3LL
Message: 3
Date: Mon, 30 Oct 2017 11:55:28 -0600
From: Jim Reisert AD1C
My AD1C report shows one mismatch.
CW 3B7 LoTW: [*]DX4WIN: [C]
How do I change the C in DX4WIN to * ?
73,
Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help:
Hi Mike,
The only choices are:
--
S
C
I
There is no * as a choice.
Help.
73,
Bud W3LL
w...@arrl.net
-Original Message-
From: Mike Cizek W0VTT
Sent: Wednesday, June 27, 2018 4:40 PM
To: 'Bud Governale, W3LL' ; dx4win@mailman.qth.net
Subject: RE: [Dx4win] Change C to *
Hello Bud
The compare utility returns:
Z60A in Republic of Kosovo does not match any DXCC entity in DX4WIN
ERROR: Couldn’t find DXCC entity for prefix Z6.
This is confusing because DX4WIN itself lists in Reports>DXCC Listing in the
matrix: Z6 Republic of Kosovo. The DX4WIN matrix also shows credit on
After many years I messed up my DXCC listing.
Using AD1C Compare yesterday all was perfect.
Today Reports>Listing shows all my DXCC listings as C and not *.
AD1C Compare spits out 32 pages of mismatch.
LOTW has [*] and DX4WIN has [C].
How do I fix DX4WIN to convert [C] to [*]?
73,
Bud W3LL
ale, W3LL
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] Confirmed to Checked
On Fri, Jan 19, 2018 at 8:48 AM, Bud Governale, W3LL wrote:
After many years I messed up my DXCC listing.
Using AD1C Compare yesterday all was perfect.
Today Reports>Listing shows all my DXCC listings as C and not *.
AD1C C
How do I export my DX4WIN log into WSJT-X so that JT Alert knows what DXCC I
need?
73,
Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post:
Was version 9 of DX4WIN adi updated to ADIF Version 3.0.7, updated 2017/09/29?
73,
Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post:
How do I create an award submission which includes one CSV file for all
mediums, not just QSL Card or eQSL?
For WPX award submission both QSL Card and eQSL are selected in the Award Setup
for WPX since both are acceptable for confirmations.
But I’m forced to choose one or the other in the
After the last listing of WY counties is an entry with the State blank and the
County is Chinese writing and a W for worked.
Reports>County>Listing
I can’t delete it.
The Reports>Summary shows a 1 in the worked column.
I waste a lot of time looking for the W in the reports pull down Listing.
In Reports>VUCC Grid listing I have two grids with no association.
How do I remove these two grids from the drop down listing?
73,
Bud W3LL
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help:
Thanks to Paul for removing the erroneous DC county from the county listing.
This fix removed the gibberish county.
73,
Bud W3LL
Message: 3
Date: Mon, 9 Jul 2018 14:32:14 -0400
From: "Bud Governale, W3LL"
To:
Subject: [Dx4win] Gibberish In County Listing
Message-ID:
Content-Type:
ked on the blank I got something that said no
association. Can't remember today exactly what it said..
Today I restarted DX4WIN and all is OK.
73,
Bud W3LL
From: Bud Governale, W3LL
Sent: Saturday, July 07, 2018 2:57 PM
To: dx4win@mailman.qth.net
Subject: VUCC Grid Listing
In Reports>VUC
I want to export the last year of my log to a file, not 258,000+ entries over
many years.
How do I do this?
73,
Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help:
you use. Probably
are unchecked.
73 Kostas SV1DPI
12/9/2018 21:22, ? Bud Governale, W3LL ??:
> I noticed my 30M WAS count was low.
> Reports>WAS>Summary. Band, Mode, Mixed, All modes, All Bands selected.
> Summary shows 1 Worked and 3 Confirmed on 30M.
> Reports>WA
I noticed my 30M WAS count was low.
Reports>WAS>Summary. Band, Mode, Mixed, All modes, All Bands selected.
Summary shows 1 Worked and 3 Confirmed on 30M.
Reports>WAS>Listing shows the same as the Summary.
So I worked many states on 30M over the past few days on FT8
using WSJT-X with JTAlert.
I
others.
Thanks for your reply and sorry for my mistake.
Message: 2
Date: Wed, 12 Sep 2018 16:59:43 -0400
From: "Bud Governale, W3LL"
To:
Subject: [Dx4win] WAS Not Showing All States Worked
Message-ID:
Content-Type: text/plain; charset="Windows-1252"
This was not the solutio
58 matches
Mail list logo
