[Dx4win] WAS Not Showing All States Worked

[Bud Governale, W3LL]

The fault was mine regarding WAS Not Showing All States Worked
The last entry in the imported ADIF file showed the state but not in the 
other qso’s.
I didn’t look at all entries and assumed they all had the state included.
DX4WIN was correct in showing the one state as worked ( W ) but not any 
others.
Thanks for your reply and sorry for my mistake.



Message: 2
Date: Wed, 12 Sep 2018 16:59:43 -0400
From: "Bud Governale, W3LL" 
To: 
Subject: [Dx4win] WAS Not Showing All States Worked
Message-ID: 
Content-Type: text/plain; charset="Windows-1252"

This was not the solution:
Go to File>Awards and check in the WAS tab the modes you use. Probably 
are unchecked.



In File>Awards>WAS Tab:
1.In the Mode Group all four modes are checked
2.In the Awards all three awards are checked
3.In the Valid Modes all fifty modes are checked including FT8.
4.In the Valid Bands 30M is checked along with others.
5.In the Award Bands 30M is checked along with others
6.No dates are entered in the Start Dates Confirmation boxes and never have 
been.

Need help.

73,

Bud W3LL
w...@arrl.net



Message: 4
Date: Wed, 12 Sep 2018 21:45:48 +0300
From: kostas sv1dpi 
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] WAS Not Showing All States Worked
Message-ID: <0ef2610d-b848-d768-e154-cb38eb29e...@otenet.gr>
Content-Type: text/plain; charset=UTF-8; format=flowed

Go to File>Awards and check in the WAS tab the modes you use. Probably 
are unchecked.

73 Kostas SV1DPI

???? 12/9/2018 21:22, ? Bud Governale, W3LL ??:
> I noticed my 30M WAS count was low.
> Reports>WAS>Summary. Band, Mode, Mixed, All modes, All Bands selected.
> Summary shows 1 Worked and 3 Confirmed on 30M.
> Reports>WAS>Listing shows the same as the Summary.
>
> So I worked many states on 30M over the past few days on FT8
> using WSJT-X with JTAlert.
>
> I take the JTAlert log.adi and run it thru ADIFLOOKUP.
> This utility uses QRZ.COM to wash thru all the logged contacts thru QRZ.COM 
> database, adding the missing info such as name, address, State, County, 
> Country etc etc.
> I then take the ADI output from ADIFLOOKUP and import it into DX4WIN.
> Been doing this for at least the past 10 years. The utility is worth its 
> weight in gold, especially for 1,000+ weekend contests.
>
> I then looked at the last 10 entries from the log in the QSO window.
> The info was all there including State and County etc.
>
> I then selected the last contact in the log.
> W3IH. The QSO window shows:
> State NM
> County Sierra
>
> I did this check for about the last 20 contacts in the log worked on 30M.
>
> When I look in
> Reports>WAS>Summary. Band, Mode, Mixed, All modes, All Bands selected
> The Summary STILL shows 1 Worked and 3 Confirmed on 30M.
> Reports>WAS>Listing shows STILL the same as the Summary.
>
> I looked at the .ADI file that was imported and all the info was there.
> That?s why the QSO window has all the info in it for State, County etc.
>
> BUT
>
> Why is
> Reports>WAS>Summary. Band, Mode, Mixed, All modes, All Bands selected
> and
> Reports>WAS>Listing
> NOT being updated?
>
> 73,
>
> Bud W3LL


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] WAS Not Showing All States Worked

[Bud Governale, W3LL]

This was not the solution:
Go to File>Awards and check in the WAS tab the modes you use. Probably 
are unchecked.



In File>Awards>WAS Tab:
1.In the Mode Group all four modes are checked
2.In the Awards all three awards are checked
3.In the Valid Modes all fifty modes are checked including FT8.
4.In the Valid Bands 30M is checked along with others.
5.In the Award Bands 30M is checked along with others
6.No dates are entered in the Start Dates Confirmation boxes and never have 
been.

Need help.

73,

Bud W3LL
w...@arrl.net



Message: 4
Date: Wed, 12 Sep 2018 21:45:48 +0300
From: kostas sv1dpi 
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] WAS Not Showing All States Worked
Message-ID: <0ef2610d-b848-d768-e154-cb38eb29e...@otenet.gr>
Content-Type: text/plain; charset=UTF-8; format=flowed

Go to File>Awards and check in the WAS tab the modes you use. Probably 
are unchecked.

73 Kostas SV1DPI

 12/9/2018 21:22, ? Bud Governale, W3LL ??:
> I noticed my 30M WAS count was low.
> Reports>WAS>Summary. Band, Mode, Mixed, All modes, All Bands selected.
> Summary shows 1 Worked and 3 Confirmed on 30M.
> Reports>WAS>Listing shows the same as the Summary.
>
> So I worked many states on 30M over the past few days on FT8
> using WSJT-X with JTAlert.
>
> I take the JTAlert log.adi and run it thru ADIFLOOKUP.
> This utility uses QRZ.COM to wash thru all the logged contacts thru QRZ.COM 
> database, adding the missing info such as name, address, State, County, 
> Country etc etc.
> I then take the ADI output from ADIFLOOKUP and import it into DX4WIN.
> Been doing this for at least the past 10 years. The utility is worth its 
> weight in gold, especially for 1,000+ weekend contests.
>
> I then looked at the last 10 entries from the log in the QSO window.
> The info was all there including State and County etc.
>
> I then selected the last contact in the log.
> W3IH. The QSO window shows:
> State NM
> County Sierra
>
> I did this check for about the last 20 contacts in the log worked on 30M.
>
> When I look in
> Reports>WAS>Summary. Band, Mode, Mixed, All modes, All Bands selected
> The Summary STILL shows 1 Worked and 3 Confirmed on 30M.
> Reports>WAS>Listing shows STILL the same as the Summary.
>
> I looked at the .ADI file that was imported and all the info was there.
> That?s why the QSO window has all the info in it for State, County etc.
>
> BUT
>
> Why is
> Reports>WAS>Summary. Band, Mode, Mixed, All modes, All Bands selected
> and
> Reports>WAS>Listing
> NOT being updated?
>
> 73,
>
> Bud W3LL
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] WAS Not Showing All States Worked

[Bud Governale, W3LL]

I noticed my 30M WAS count was low.
Reports>WAS>Summary. Band, Mode, Mixed, All modes, All Bands selected. 
Summary shows 1 Worked and 3 Confirmed on 30M.
Reports>WAS>Listing shows the same as the Summary.

So I worked many states on 30M over the past few days on FT8
using WSJT-X with JTAlert.

I take the JTAlert log.adi and run it thru ADIFLOOKUP.
This utility uses QRZ.COM to wash thru all the logged contacts thru QRZ.COM 
database, adding the missing info such as name, address, State, County, Country 
etc etc.
I then take the ADI output from ADIFLOOKUP and import it into DX4WIN.
Been doing this for at least the past 10 years. The utility is worth its weight 
in gold, especially for 1,000+ weekend contests.

I then looked at the last 10 entries from the log in the QSO window. 
The info was all there including State and County etc.

I then selected the last contact in the log.
W3IH. The QSO window shows:
State NM
County Sierra

I did this check for about the last 20 contacts in the log worked on 30M.

When I look in 
Reports>WAS>Summary. Band, Mode, Mixed, All modes, All Bands selected
The Summary STILL shows 1 Worked and 3 Confirmed on 30M.
Reports>WAS>Listing shows STILL the same as the Summary.

I looked at the .ADI file that was imported and all the info was there.
That’s why the QSO window has all the info in it for State, County etc.

BUT

Why is
Reports>WAS>Summary. Band, Mode, Mixed, All modes, All Bands selected
and
Reports>WAS>Listing 
NOT being updated?

73,

Bud W3LL

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Export A Portion of The Log

[Bud Governale, W3LL]

I want to export the last year of my log to a file, not 258,000+ entries over 
many years.

How do I do this?

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Award Submission

[Bud Governale, W3LL]

How do I create an award submission which includes one CSV file for all 
mediums, not just QSL Card or eQSL?

For WPX award submission both QSL Card and eQSL are selected in the Award Setup 
for WPX since both are acceptable for confirmations.

But I’m forced to choose one or the other in the Submission Medium box. Not 
both (or all) is available as a choice.

I need to send CSV files for Mixed, Phone, CW and Digital files that include 
all acceptable mediums in each Mixed, Phone, CW and Digital file.
Otherwise I’d be sending twice the files. 
Four eQSL files and four QSL Card files. The award manager would then need to 
combine the respective QSL Card and EQSL CSV files.

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Gibberish In County Listing

[Bud Governale, W3LL]

Thanks to Paul for removing the erroneous DC county from the county listing.
This fix removed the gibberish county.

73,

Bud W3LL


Message: 3
Date: Mon, 9 Jul 2018 14:32:14 -0400
From: "Bud Governale, W3LL" 
To: 
Subject: [Dx4win] Gibberish In County Listing
Message-ID: 
Content-Type: text/plain; charset="Windows-1252"

After the last listing of WY counties is an entry with the State blank and the 
County is Chinese writing and a W for worked.
Reports>County>Listing

I can?t delete it. 

The Reports>Summary shows a 1 in the worked column.
I waste a lot of time looking for the W in the reports pull down Listing.

How do we fix this?

73,

Bud W3LL
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Gibberish In County Listing

[Bud Governale, W3LL]

After the last listing of WY counties is an entry with the State blank and the 
County is Chinese writing and a W for worked.
Reports>County>Listing

I can’t delete it. 

The Reports>Summary shows a 1 in the worked column.
I waste a lot of time looking for the W in the reports pull down Listing.

How do we fix this?

73,

Bud W3LL
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] VUCC Grid Listing

[Bud Governale, W3LL]

Sorry, false alarm.

Background:
I removed a grid for a contact. That grid was included in the Reports>VUCC 
LISTING.
When I removed the grid with the only QSO associated with that grid the grid 
remained in the listing with a blank under 6M, 2M and 432. - all blank for 
that grid. If I clicked on the blank I got something that said no 
association. Can't remember today exactly what it said..

Today I restarted DX4WIN and all is OK.

73,

Bud W3LL


From: Bud Governale, W3LL 
Sent: Saturday, July 07, 2018 2:57 PM
To: dx4win@mailman.qth.net 
Subject: VUCC Grid Listing

In Reports>VUCC Grid listing I have two grids with no association.
How do I remove these two grids from the drop down listing?

73,

Bud W3LL

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] VUCC Grid Listing

[Bud Governale, W3LL]

In Reports>VUCC Grid listing I have two grids with no association.
How do I remove these two grids from the drop down listing?

73,

Bud W3LL

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Change C to *

[Bud Governale, W3LL]

Hi Mike,

The only choices are:

--
S
C
I

There is no * as a choice.

Help.

73,

Bud W3LL
w...@arrl.net



-Original Message- 
From: Mike Cizek W0VTT

Sent: Wednesday, June 27, 2018 4:40 PM
To: 'Bud Governale, W3LL' ; dx4win@mailman.qth.net
Subject: RE: [Dx4win] Change C to *

Hello Bud, in the QSO window for that QSO.  Click on the little box and
change the C to a * for either band, mode, or mixed, whatever is not
matched.

--
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Bud Governale, W3LL
Sent: Wednesday, June 27, 2018 15:22
To: dx4win@mailman.qth.net
Subject: [Dx4win] Change C to *

My AD1C report shows one mismatch.

CW 3B7   LoTW: [*]DX4WIN: [C]

How do I change the C in DX4WIN to *  ?

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Change C to *

[Bud Governale, W3LL]

My AD1C report shows one mismatch.

CW 3B7   LoTW: [*]DX4WIN: [C]

How do I change the C in DX4WIN to *  ?

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Compare DX4WIN DXCC Credit Status With LOTW Utility

[Bud Governale, W3LL]

The compare utility returns:

Z60A in Republic of Kosovo does not match any DXCC entity in DX4WIN

ERROR: Couldn’t find DXCC entity for prefix Z6.


This is confusing because DX4WIN itself lists in Reports>DXCC Listing in the 
matrix: Z6 Republic of Kosovo. The DX4WIN matrix also shows credit on various 
bands. 
DX4WIN also gives me credit both direct and via LOTW.

It appears to not be a DX4WIN issue but maybe one with the compare utility.

How do I fix this?

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Confirmed to Checked

[Bud Governale, W3LL]

Hi Jim,

Thanks.

I had on a backup computer with my log.
I normally update this each nite by copying the station log into the backup 
computer but forgot last night.


When loaded the backup log into my station computer all is ok.
Only missing was SV9CVY on 160M FT8 from last night.
Fortunately I wrote the info on a scratch pad when he was worked.

Still don't know what I did to change all [*] to [C] in the DXCC Report>List 
file.

Hope to never do that again.

73,

Bud W3LL



-Original Message- 
From: Jim Reisert AD1C

Sent: Friday, January 19, 2018 5:05 PM
To: Bud Governale, W3LL
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] Confirmed to Checked

On Fri, Jan 19, 2018 at 8:48 AM, Bud Governale, W3LL wrote:


After many years I messed up my DXCC listing.
Using AD1C Compare yesterday all was perfect.

Today Reports>Listing shows all my DXCC listings as C and not *.
AD1C Compare spits out 32 pages of mismatch.

LOTW has [*] and DX4WIN has [C].

How do I fix DX4WIN to convert [C] to [*]?


This may seem like a dumb question, but

How long ago did you mess things up?  Do you have a recent backup of
your log from*before* that?  Start with the old log, and Use File |
Import then File | Merge DX4WIN log and use your current (new) log for
that.  Make sure to select "Duplicates are Ignored".

This will add all your new QSOs (since the backup) to the log with the
good DXCC status.  If you have confirmed QSOs since that backup, you
will have to do those again.

--
Jim Reisert AD1C, <jjreis...@alum.mit.edu>, http://www.ad1c.us 


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Confirmed to Checked

[Bud Governale, W3LL]

After many years I messed up my DXCC listing.
Using AD1C Compare yesterday all was perfect.

Today Reports>Listing shows all my DXCC listings as C and not *.
AD1C Compare spits out 32 pages of mismatch.

LOTW has [*] and DX4WIN has [C].

How do I fix DX4WIN to convert [C] to [*]?

73,

Bud W3LL
w...@arrl.net

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Version 9 DX4WIN ADIF Version

[Bud Governale, W3LL]

Was version 9 of DX4WIN adi updated to ADIF Version 3.0.7, updated 2017/09/29?

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Export DX4WIN Log To WSJT-X

[Bud Governale, W3LL]

How do I export my DX4WIN log into WSJT-X so that JT Alert knows what DXCC I 
need?

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] WAS Reports Error

[Bud Governale, W3LL]

Reports>WAS

The last entry right after WY Wyoming is #1 in the St state column and W in the 
State name column. 
MIX, PHO, DIG, 160 and 80 columns each have a W in them.
Each W when clicked opens up to report in the entry window.

How does this erroneous State get fixed?

73,

Bud W3LL
w...@arrl.net

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] F8 Lookup Specific QSO by Callsign

[Bud Governale, W3LL]

In prior versions I always entered a callsign and pressed F8 to see logged 
QSO’s with a specific station.

Now I get “not in the log”. Yet I find the callsign by scrolling the log and 
finding the QSO’s I’m looking for.

What changed or what am I now doing wrong? 

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] ADIF.PMP File

[Bud Governale, W3LL]

I can’t find adif.pmp file in dx4w805\SAVE\adif.pmp  

I found it in a 2014 unzipped cty. file.

I copied it and pasted adif.pmp into dx4win\save directory.

Is this the correct thing to do?

73,

Bud W3LL



Message: 3
Date: Mon, 30 Oct 2017 11:55:28 -0600
From: Jim Reisert AD1C 
To: DX4WIN Reflector 
Subject: [Dx4win] DX4WIN 9.01 and "Compare DX4WIN Award Credit Status
with LoTW"
Message-ID:

Re: [Dx4win] Check IOTA

[Bud Governale, W3LL]

Hi Jim,

1.I checked item 1 by going thru the DXCC window and choosing the more 
rare entities. I found all to have IOTA's assigned.


2.Yes this is true for single island entities.

3.Yes the double back check is understood.

4.OK, it will not correct any previously entered wrong IOTA's.

5.I ran the CHECK IOTAs and saw a message window open.
One IOTA was set.
I don't know which one and so don't know where to find IOTAMSG in WHICH QSO 
notes.
My message was not specific like yours which pointed you to a callsign and 
the PA QSO issue.


6..The remainder of your email has great insight into the what and how. 
Thanks.


No issues to report.

Was just hoping for some magic in finding any QSO's with IOTAs that I failed 
to enter from more obscure places listed in the IOTA site listing.


Again thanks for your help. Always appreciated.

73,

Bud W3LL



-Original Message- 
From: Jim Reisert AD1C

Sent: Monday, October 30, 2017 9:15 AM
To: Bud Governale, W3LL
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] Check IOTA

On Sun, Oct 29, 2017 at 4:20 PM, Bud Governale, W3LL asked:

Does V9 IOTA CHECK scan my logbook and enter the appropriate IOTA’s to 
those that are missing from an appropriate DXCC entry?
Can I then go to REPORTS and send out QSL confirmations for all those with 
a W added to the report?


Bud, please re-read this and see if it makes sense:

http://mailman.qth.net/pipermail/dx4win/2017-October/023026.html

The answer is basically yes.  But it's not going to assign any obscure 
IOTAs.


--
Jim Reisert AD1C, <jjreis...@alum.mit.edu>, http://www.ad1c.us 


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] FT8 Mode Search

[Bud Governale, W3LL]

It's now working.
Maybe a first time try glitch.

73,

Bud W3LL



-Original Message- 
From: David Kozinn, K2DBK

Sent: Sunday, October 29, 2017 8:12 PM
To: Bud Governale, W3LL ; dx4win@mailman.qth.net
Subject: Re: [Dx4win] FT8 Mode Search

First, what option did you use on the Import as the option for
duplicates? If you used "Imported QSO is ignored" and you already had
those QSOs in your log, you'd need to pay attention to the display that
comes up that says how many were actually imported and how many were
ignored. For example, I just read in the WSJT-X ADIF file which has 866
QSOs in it and it said:

Import Finished

866 QSOs were read
[A bunch of other stuff]
866 Duplicate QSOs were processed

In that case, it didn't import anything because they were already there.

If you hadn't previously imported or otherwise entered them, I'd suggest
that you look at one QSO that you know is in there and see what the mode
is set to, we can then figure it out from there.


On 10/29/2017 7:44 PM, Bud Governale, W3LL wrote:

I imported my WSJT-X .adi file into V9.

Next I did a F8 search with FT8 entered in the Mode box.

The result was “No matching QSO’s Found”.

I looked at the WSJT-X log. It consisted of 434 FT8 QSO’s.

Why none found in the search?

What am I doing wrong?

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to k2...@arrl.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


--
73,
David, K2DBK
http://k2dbk.blogspot.com
http://k2dbk.com
twitter: @k2dbk

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] FT8 Mode Search

[Bud Governale, W3LL]

I imported my WSJT-X .adi file into V9.

Next I did a F8 search with FT8 entered in the Mode box.

The result was “No matching QSO’s Found”.

I looked at the WSJT-X log. It consisted of 434 FT8 QSO’s.

Why none found in the search?

What am I doing wrong?

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] QRZ.COM - Callsign Lookup Street Address Missing

[Bud Governale, W3LL]

It's now working.

I needed a QRZ.COM renewal XML subscription.

73,

Bud W3LL



-Original Message- 
From: Mike Cizek W0VTT

Sent: Sunday, October 29, 2017 6:11 PM
To: 'Bud Governale, W3LL' ; dx4win@mailman.qth.net
Subject: RE: [Dx4win] QRZ.COM - Callsign Lookup Street Address Missing

Hello Bud,

You need to log in to QRZ first.

--
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Bud Governale, W3LL
Sent: Sunday, October 29, 2017 17:07
To: dx4win@mailman.qth.net
Subject: [Dx4win] QRZ.COM - Callsign Lookup Street Address Missing

I switched from using the Flying Horse CD Rom in V8 to using QRZ.Com in V9.
I entered my user name and password in Preferences..

I’m now missing the street address line when using QRZ.COM with F3.

What do I need to do?

73,

Bud W3LL
w...@arrl.net

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] QRZ.COM - Callsign Lookup Street Address Missing

[Bud Governale, W3LL]

I'm already logged into QRZ.COM. Never logout. When I go to QRZ.COM website 
my callsign is in the right hand corner. From there I can go to Account etc.


I closed DX4WIN and reopened it.
Still no address line show in the Callsign/MGR Lookup window.

73,

Bud W3LL
w...@arrl.net



-Original Message- 
From: Mike Cizek W0VTT

Sent: Sunday, October 29, 2017 6:11 PM
To: 'Bud Governale, W3LL' ; dx4win@mailman.qth.net
Subject: RE: [Dx4win] QRZ.COM - Callsign Lookup Street Address Missing

Hello Bud,

You need to log in to QRZ first.

--
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Bud Governale, W3LL
Sent: Sunday, October 29, 2017 17:07
To: dx4win@mailman.qth.net
Subject: [Dx4win] QRZ.COM - Callsign Lookup Street Address Missing

I switched from using the Flying Horse CD Rom in V8 to using QRZ.Com in V9.
I entered my user name and password in Preferences..

I’m now missing the street address line when using QRZ.COM with F3.

What do I need to do?

73,

Bud W3LL
w...@arrl.net

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Check IOTA

[Bud Governale, W3LL]

Does V9 IOTA CHECK scan my logbook and enter the appropriate IOTA’s to those 
that are missing from an appropriate DXCC entry?
Can I then go to REPORTS and send out QSL confirmations for all those with a W 
added to the report? 

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] QRZ.COM - Callsign Lookup Street Address Missing

[Bud Governale, W3LL]

I switched from using the Flying Horse CD Rom in V8 to using QRZ.Com in V9. 
I entered my user name and password in Preferences..

I’m now missing the street address line when using QRZ.COM with F3.

What do I need to do?

73,

Bud W3LL
w...@arrl.net

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MSTCALS.DAT Not Found

[Bud Governale, W3LL]

Each time I start 9.0.1 I get an error message:

Master file:
C\dx4w901\save\mstcals.dat
not found, no calls loaded.

How do I fix this?

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Entry Window Smaller In VErsion 9.0.1

[Bud Governale, W3LL]

My entry window is smaller in version 9.

Example: 3-1/2” wide by 4” high in Ver. 9.0.1

and 4-1/2” wide by 4” high in Ver. 8.05

All my other windows opened in their correct positions and size.

How do I fix this?

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] FT8 Mode Imports As SSB

[Bud Governale, W3LL]

JT65 imports as RTTY – OK

FT8 imports to SSB  - Not OK.

How do I fix this prior to making the import so that FT8 imports as RTTY?

73,

Bud W3LL

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] ADI Import Having Duplicates Rejected

[Bud Governale, W3LL]

Hi Mike,

Nice hearing from you!!

That worked. Didn't know that window had a dropdown.

Thanks!!

73,

Bud W3LL



-Original Message- 
From: Mike Cizek W0VTT

Sent: Tuesday, July 04, 2017 9:24 PM
To: 'Bud Governale, W3LL' ; dx4win@mailman.qth.net
Subject: RE: [Dx4win] ADI Import Having Duplicates Rejected

Hello Bud,

You have several options when importing QSOs.  When you select a file for
import, a window opens up entitled "Options for duplicate QSOs".  It has a
drop down menu and the default option is "Issue warning and stop".The
next two options are "Imported QSO replaces existing QSO" and "Imported QSO
is ignored".  Simply select whichever one of these you like and the import
will proceed.  GL.

73,
Mike W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Bud Governale, W3LL
Sent: Tuesday, 04 July, 2017 20:13
To: dx4win@mailman.qth.net
Subject: [Dx4win] ADI Import Having Duplicates Rejected

I imported the WSJT-X adi file containing my first QSO into DX4WIN. It went
perfectly. The DX4WIN log shows mode JT65. Perfect.

The WSJT-X adi file now has three qso's including the first one.

DX4WIN rejected the import because of the one duplicate QSO.

How do I set DX4WIN to accept all duplicates in the adi file?

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] ADI Import Having Duplicates Rejected

[Bud Governale, W3LL]

Hi Dan,

That worked. Didn't know that window had a dropdown.

Thanks!!

73,

Bud W3LL



-Original Message- 
From: Dan Violette

Sent: Tuesday, July 04, 2017 9:23 PM
To: 'Bud Governale, W3LL' ; dx4win@mailman.qth.net
Subject: RE: [Dx4win] ADI Import Having Duplicates Rejected

Check the options in the drop down list when you are ready to import. 
"Issue Warning and Stop" is not the only choice, only the default.  Dan KI6X


-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] 
On Behalf Of Bud Governale, W3LL

Sent: Tuesday, July 4, 2017 6:13 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] ADI Import Having Duplicates Rejected

I imported the WSJT-X adi file containing my first QSO into DX4WIN. It went 
perfectly. The DX4WIN log shows mode JT65. Perfect.


The WSJT-X adi file now has three qso’s including the first one.

DX4WIN rejected the import because of the one duplicate QSO.

How do I set DX4WIN to accept all duplicates in the adi file?

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] ADI Import Having Duplicates Rejected

[Bud Governale, W3LL]

I imported the WSJT-X adi file containing my first QSO into DX4WIN. It went 
perfectly. The DX4WIN log shows mode JT65. Perfect.

The WSJT-X adi file now has three qso’s including the first one.

DX4WIN rejected the import because of the one duplicate QSO.

How do I set DX4WIN to accept all duplicates in the adi file?

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] All Spots are Grayed Out

[Bud Governale, W3LL]

Thanks Jim. That solved the problem.

I was in the Dayton Contest Dinner audience to see your induction into the CQ 
Hall Of Fame.
Well deserved!

73,

Bud W3LL



- Original Message - 
From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: Bud Governale, W3LL w...@arrl.net
Cc: dx4win@mailman.qth.net
Sent: Tuesday, May 22, 2012 10:14 PM
Subject: Re: [Dx4win] All Spots are Grayed Out


On Tue, May 22, 2012 at 9:15 AM, Bud Governale, W3LL w...@arrl.net wrote:

 All spots are now showing up grayed out.

It sounds like your configuration file may be corrupt.

Exit DX4WIN

Delete DX4WIN.CFG from your SAVE directory

Start DX4WIN

See if this fixes the problem. If not, exit DX4WIN, delete DX4WIN.PUT
from your SAVE directory, and restart.

I hope you saved your preferences in an .INI file that you can merge
into your now-empty preferences.

- Jim

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] All Spots are Grayed Out

[Bud Governale, W3LL]

All spots are now showing up grayed out.
Verified those that should not be grayed out are showing up in gray.
Preferences match DX4WIN running on other computers here with no grayed out 
issues.

I haven't make any changes.
Been working properly with spot colors over the last few years.

Using V 8.05 since it was introduced.

Any help appreciated.

73,

Bud W3LL
w...@arrl.net

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] eQSL Confirmations

[Bud Governale, W3LL]

I like this easier method.

However, I looked all over but can't find where to set preferences to always 
set the eQSL flag for new QSOs.
Also can this be setup for LOTW? Where?

73,

Bud W3LL


- Original Message - 
From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: Bud Governale, W3LL w...@arrl.net
Cc: dx4win@mailman.qth.net
Sent: Wednesday, February 29, 2012 11:18 AM
Subject: Re: [Dx4win] eQSL Confirmations


On Wed, Feb 29, 2012 at 7:31 AM, Bud Governale, W3LL w...@arrl.net wrote:

 1. I do that - but select a date range in DX4WIN

If you have your preferences set up to always set the eQSL flag for
new QSOs, you don't need to set a date range.  Export to eQSL will
only export those new QSOs.  When done exporting, let it clear the
upload flag and set the upload date.

 6. I now do your step 5 - Import from eQSL, selecting the file that was 
 downloaded.

 What could be wrong?

Don't know, I haven't downloaded from eQSL in a while. I'll try maybe
next week if I get some free time.

- Jim

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] eQSL Confirmations

[Bud Governale, W3LL]

I uploaded to eQSL DX4WIN logbook contacts from the 160M SSB contest. DX4WIN 
asked if I wanted to upload 496 contacts. 
That was the correct number of contacts made so I said yes. I have the 
generated .adi file which was uploaded to eQSL. A 
few days after the contest I downloaded the eQSL report (which I have) and 
imported it into DX4WIN. I was surprised to 
see all 496 contacts were confirmed.
I then went into eQSL to see who was confirmed. Only saw about 40 confirmations 
on eQSL.

This phenomenon also happened during the last contest. I also read about 
someone reporting the phenomenal success rate 
after that previous contest.

It appears that I must be doing something wrong - although I've been uploading 
to both LOTW and eQSL via DX4WIN for 
quite some time.
(BTW, DX4WIN showed 17 confirmations from LOTW which is correct. So no issue 
with LOTW).

I now need a way to purge all the bogus eQSL confirmations and find out how to 
fix the confirmation issue.

It doesn't appear to be an eQSL issue since eQSL doesn't show everything 
confirmed. It may be an issue with the DX4WIN 
generated .adi upload and/or .adi down load files - but I can't read .adi. Just 
guessing.

Looking for help.

73,

Bud W3LL
w...@arrl.net


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Removing a Bad Prefix

[Bud Governale, W3LL]

ReportsWPXLISTING:

2D0 is listed as confirmed C for both Mixed and Phone.
When I click on either C I get a message saying: No matching QSO found

How do I fix this problem?

73,

Bud W3LL
w...@arrl.net
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Change Confirmed to Checked

[Bud Governale, W3LL]

I ran DX4WLOTW and received three mismatches.
All three are marked X for LOTW and marked C for DX4WIN.

I've been unable to get the C's changed to X's. (Confirmed changed to Checked).

How do I do this?

73,

Bud W3LL
w...@arrl.net
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] PSK-31 Spot Frequency

[Bud Governale, W3LL]

Where is the spotted station in the audio passband spectrum window when I click 
on a PSK-31 spot? 

How do I find it amongst many other stations within the audio passband?

K3 radio is set to USB or PSK-D mode. 

73,

Bud W3LL
w...@arrl.net
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] ADIF V2.19

[Bud Governale, W3LL]

The upload modes were a combination of RTTY and SSB. The version of DX4WIN was 
8.04.

I had no trouble with the upload. It appeared to go well.

I was just curious about the eQSL upload statement at the bottom of the  
results page about the ADIF version spec non 
compliance.

73,

Bud W3LL

- Original Message - 
From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: Bud Governale, W3LL w...@arrl.net
Cc: dx4win@mailman.qth.net
Sent: Sunday, August 22, 2010 9:49 PM
Subject: Re: [Dx4win] ADIF V2.19


On 8/22/2010 4:40 PM, Bud Governale, W3LL wrote:

 I saw the following statement when I uploaded QSO's to eQSL.
 Is DX4WIN in compliance with the spec?

 Logger not compliant with ADIF V2.1.9 specs due to invalid mode(s)
 Logger identified as: DX4WIN

What was the mode that it complained about, and what version of DX4WIN
were you using?  I have had NO trouble uploading to LoTW and eQSL using
7.07 and 8.0x.  Note that PSK is *not* an ADIF mode, you must choose
PSK31 (or PSK63 if it's available).  This is a common mistake.

73 - Jim AD1C

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] ADIF V2.19

[Bud Governale, W3LL]

Jim found the source of the ADIF problem.

It was NOT related to a fault in DX4WIN.

The source of the ADIF issue was the pass-thru program I used to automatically 
populate grid, state, county, address, 
etc. by looking up the information from QRZ.COM and saving a lot of tedious 
work.

73,

Bud W3LL


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] ADIF V2.19

[Bud Governale, W3LL]

I saw the following statement when I uploaded QSO's to eQSL.
Is DX4WIN in compliance with the spec?

Logger not compliant with ADIF V2.1.9 specs due to invalid mode(s)
Logger identified as: DX4WIN

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Keying MMTTY

[Bud Governale, W3LL]

Hi Jim,

I forgot to look at your outstanding Application Notes.

I spent hours trying to get this to work and in two minutes after reading your 
Application Note it was working.
I didn't know about Alt S to set up the PTT Key Line.

Thanks for all your contributions!

73,

Bud W3LL
w...@arrl.net


- Original Message - 
From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: Bud Governale, W3LL w...@arrl.net
Cc: dx4win@mailman.qth.net
Sent: Saturday, June 19, 2010 1:16 AM
Subject: Re: [Dx4win] Keying MMTTY


Bud, have you read the MMTTY application note:

http://dx4win.ad1c.us/

If you have MMTTY working stand-alone, you're half-way there.  Make
sure the COM port you are using for PTT/FSK isn't being used by
anything else (check your preferences).

73 - Jim AD1C

On Fri, Jun 18, 2010 at 10:50 PM, Bud Governale, W3LL w...@arrl.net wrote:
 I'm trying to get DX4WIN to key MMTTY on my IC-7000.
 When clicking on a DX4WIN macro RTTY button, I can hear the tones playing but 
 the Icom IC-7000 is not being keyed.

 I have the path to the MMTTY executable set in the DX4WIN RTTY preference 
 window.

 I can open the MMTTY program and send RTTY FSK directly from MMTTY. This 
 indicates that the two transistor FSK keying
 cable (PTT and FSK) is functioning properly thru its com port.
 If DX4WIN is open at the same time then the MMTTY program cannot open its com 
 port. I have to close DX4WIN to use 
 MMTTY
 as a stand alone program.

 I can send CW properly in DX4WIN thru the FSK keying cable com port.
 I don't understand why DX4WIN cannot key MMTTY.

 What am I doing wrong?

 73,

 Bud W3LL
 w...@arrl.net

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Keying MMTTY

[Bud Governale, W3LL]

I'm trying to get DX4WIN to key MMTTY on my IC-7000.
When clicking on a DX4WIN macro RTTY button, I can hear the tones playing but 
the Icom IC-7000 is not being keyed.

I have the path to the MMTTY executable set in the DX4WIN RTTY preference 
window.

I can open the MMTTY program and send RTTY FSK directly from MMTTY. This 
indicates that the two transistor FSK keying 
cable (PTT and FSK) is functioning properly thru its com port.
If DX4WIN is open at the same time then the MMTTY program cannot open its com 
port. I have to close DX4WIN to use MMTTY 
as a stand alone program.

I can send CW properly in DX4WIN thru the FSK keying cable com port.
I don't understand why DX4WIN cannot key MMTTY.

What am I doing wrong?

73,

Bud W3LL
w...@arrl.net


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] All Spots Greyed Out

[Bud Governale, W3LL]

Don't know what I did but all spots have been coming in grayed out.

Using version 8.04.

Bands, Modes, and Mode Groups are properly checked in Preferences Station Tab

Band/Mode not conf is checked in Preferences Packet 1

Packet 2 has not been changed

Packet 3 has all Bands and Modes checked

What could be causing this?

I'm on digest so also send direct.

73,

Bud W3LL
w...@arrl.net
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] All Spots Greyed Out

[Bud Governale, W3LL]

Jim,

Your solution worked! I would not have found it without your help.

In retrospect I also inadvertently tried to start DX4WIN twice at the same 
time. 
I didn't associate this to my problem. 

73,

Bud W3LL



- Original Message - 
From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: Bud Governale, W3LL w...@arrl.net
Cc: dx4win@mailman.qth.net
Sent: Friday, May 21, 2010 12:56 PM
Subject: Re: [Dx4win] All Spots Greyed Out


Bud, I had this problem recently (tried to start DX4WIN twice at the
same time, .CFG got corrupted).  The only way to fix it was to delete
the DX4WIN.CFG file and merge in my .INI settings that I had saved
prior to the problem.  I would not trust writing the .INI file
post-problem then merging into empty CFG file.

- Jim

On Fri, May 21, 2010 at 8:55 AM, Bud Governale, W3LL w...@arrl.net wrote:

 Don't know what I did but all spots have been coming in grayed out.

 Using version 8.04.

 Bands, Modes, and Mode Groups are properly checked in Preferences Station Tab

 Band/Mode not conf is checked in Preferences Packet 1

 Packet 2 has not been changed

 Packet 3 has all Bands and Modes checked

 What could be causing this?

 I'm on digest so also send direct.

 73,


-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] CQ DX Field Submission

[Bud Governale, W3LL]

Thanks Jim, you found what I was doing wrong. 
I got tripped up going to 8.03 and not checking if those boxes were still 
checked.

Merry Christmas and a Happy New Year to you and your family!

73,

Bud W3LL


- Original Message - 
From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: Bud Governale, W3LL w...@arrl.net
Cc: dx4win@mailman.qth.net
Sent: Thursday, December 24, 2009 1:45 AM
Subject: Re: [Dx4win] CQ DX Field Submission


On Wed, Dec 23, 2009 at 6:01 PM, Bud Governale, W3LL w...@arrl.net wrote:

 I completed a CQ Field Mixed Submission in V8.03

 When I then try to do a PHO or DIG submission no QSO's are listed.
 What am I doing wrong?

In the Award Manager, are the boxes checked for Mode awards?

- Jim

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] CQ DX Field Submission

[Bud Governale, W3LL]

I completed a CQ Field Mixed Submission in V8.03

When I then try to do a PHO or DIG submission no QSO's are listed.
What am I doing wrong? 

73,

Bud W3LL
w...@arrl.net

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] WPX QSL's Oldest Confirmed

[Bud Governale, W3LL]

DX4WIN V 8.02 is consistently choosing the oldest QSL to confirm in a listing.

I opened Reports  WPX  Listing. I want to QSL all the Digital W's (Worked) 
that I could find.

Here's an example. I click on a W in the WPX Listing. 
The entry window shows the QSO. 
I flag it for QSL direct.
I happen to have the Same Call window open and notice that I have 32 RTTY Q's 
with this call. 
DX4WIN selected the oldest one. It was from 2002. It should have selected the 
latest one from 2009.
Traditionally DX4WIN selects the latest confirmed QSL.

What do I have set up incorrectly?

73,

Bud W3LL
w...@arrl.net



__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] WPX QSL's Oldest Confirmed

[Bud Governale, W3LL]

Hi Jim,

Thanks for getting back to me.

I wasn't trying to create a submission.
I was trying to catch up on my QSLing of Digital QSO's that count for the new 
Digital WPX award.

This is how I've done it in the past for DXCC Countries, the Challenge, 
Counties, etc. that count for the award but not 
QSL'd.

I'm not yet ready for a submission. I need to QSL them first.

What do I need to do differently in V8.02 to accomplish this objective of 
QSLing the latest and not the oldest contacts?

73,

Bud W3LL
w...@arrl.net


- Original Message - 
From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: Bud Governale, W3LL w...@arrl.net
Cc: dx4win@mailman.qth.net
Sent: Thursday, November 12, 2009 8:11 PM
Subject: Re: [Dx4win] WPX QSL's Oldest Confirmed


On Thu, Nov 12, 2009 at 5:57 PM, Bud Governale, W3LL w...@arrl.net wrote:

 DX4WIN V 8.02 is consistently choosing the oldest QSL to confirm in a listing.

 I opened Reports  WPX  Listing. I want to QSL all the Digital W's 
 (Worked) that I could find.

 Here's an example. I click on a W in the WPX Listing.
 The entry window shows the QSO.
 I flag it for QSL direct.
 I happen to have the Same Call window open and notice that I have 32 RTTY Q's 
 with this call.
 DX4WIN selected the oldest one. It was from 2002. It should have selected the 
 latest one from 2009.
 Traditionally DX4WIN selects the latest confirmed QSL.

Hi Bud,

When creating a submission, DX4WIN selects the most recent eligible
confirmed QSO.

When do you what you are doing, you are creating a filter.  A filter
in DX4WIN always finds the oldest matching QSO.

Maybe you got the two confused

73 - Jim AD1C

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] CQ DX Field Submittal

[Bud Governale, W3LL]

I'm getting ready to do a CQ DX Field Submission using V8.02
Since there are separate awards for Mixed, Phone, Digital and certain selected 
bands, I put a check mark in Mixed, Band
and Mode in the CQ Field Award choices.

The Submission printouts for Mixed, Phone, Digital, 10M, 40M and 80M are all ok 
with one entry for each grid.

However, I now want to choose specific QSL's to make the submission easier.
If countries located within a single grid field are selected (identified in the 
application literature) and they are
confirmed by a national organization (such as LOTW) then a submitted QSL is not 
required.

Here's an example of my problem:

Grid AG is only confirmed by two QSO's with ZL8R. One for 40M SSB and one for 
15M RTTY.

In the ZL8R 40M SSB QSO window, in the CQFld column, I put an S (submitted) in 
the Mode column (for SSB) and one S in
the Band column (for 40M).

In the ZL8R 15M RTTY QSO window, in the CQFld column, I put an S in the Mixed 
column ( RTTY now adds a Mixed mode to the
previous SSB QSO) and one in the Mode column (for RTTY).

Problem: Now when I print out the mixed submission listing (selecting award CQ 
DX Field, Checking only Mixed award,
Selecting All Bands and All Modes) the printout has two entries for Grid AG. 
One for SSB and one for RTTY QSO's. Only
one entry should be listed for each of the Grids for the mixed mode submission. 
In this case only the RTTY QSO should
have been listed since it was the only one selected (S) for Mixed Mode.

The above is just one example. I've done this for other grids that have the 
similar QSO combinations. Now my Mixed
submission printout has many duplicate grid confirmations in it.

How am I supposed to accomplish this?

73,

Bud W3LL
w...@arrl.net





__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] CQ DX Field Submittal

[Bud Governale, W3LL]

I expanded the QSO window using F5.

I have grid AH confirmed QSO's for SSB, Digital, and 10M.

I next made sure there were no award flags for any grid AH QSO - used F8 to 
sort this.

I put S in the  mode box for  5W0TR, a 15m ssb contact.
I put S in the band box for K8T, a 10M SSB contact.
I put S in the mode box for 5W0DP, a 17M RTTY contact.

I confirmed that no other qso with a grid of AH had any set flags in the CQ DX 
Field submissions box.

I deselected in the Award box the checkmarks for both Band and Mode but left 
the checkmark next to Mixed so that I would
print out only a Mixed submission.

I next printed the mixed submittal and darn it but there were three duplicate 
entries for grid AH Mixed. All three of
the above QSO's, where I put an S, showed up counting for Grid AH Mixed. Only 
one should have shown up in this Mixed
Award printout. Note that none of the three had an S flag in the Mixed column.

I next wanted to see what would appear in the SSB mode printout.

I selected only Mode in the Award box. I selected PHO in the Modes box and All 
Bands in the Bands box.

The Phone printout had two entries for GRID AH. They were the two SSB contacts 
above having an S in the award flag for
mode. One was intended for SSB mode and the other intended to count for 10M.

I've done these submittals many times in the past with earlier versions of 
DX4WIN. This one is not working correctly.
Or, I'm not doing something correctly for this version. I cannot go any further 
with this Submission until I know how to
use it properly.

It works perfectly if I don't try to select specific Grid QSO's. But I need to 
do that because some QSO's that DX4WIN
selected are near the boundaries of two Grids and the QSL doesn't give a LAT or 
LON or Grid location. I have alternate
QSL's that are clearly within the boundaries of a grid or so state that on the 
QSL card. But DX4WIN won't let me make
any changes and still print out properly without having more than one entry per 
mode or band.

I tried to give my exact procedure above and in my prior email. What am I doing 
wrong?

Thanks for your patience and help!

73,

Bud W3LL
w...@arrl.net






__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] V8.02 County Summary Report Access Violation

[Bud Governale, W3LL]

Here's what I did to see my county summary spreadsheet in Version 8.02:

ReportsawardcountyReport Action = SummaryAll ModesAll BandsMixed, Mode, 
Band checked
Click on green checked OK button and get:

Access violation at address 00402D42 in module dx4win.exe. Read of address 
.
I then get a blank county summary page.

What happened? What's wrong?

It works properly for Listing, Listing Worked and Needed Listing.   
I need to see the summary sheet.

73,

Bud W3LL
w...@arrl.net

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] eQSL Limited QSO Upload

[Bud Governale, W3LL]

I want to upload to eQSL.

When I select Set Upload Flag, I'm asked if I want to upload 65,409 QSL's.
I don't. I only want to upload less than 10K at a time.

I activate an F8 filter and put 01/01/1901 into the eQSL upload date and see 
65409 QSO's listed as expected.
When I try to limit this to a date giving less than 10K QSO's I get No 
Matching QSO Found for any date other than 
01/01/1901.
Why?

How do I accomplish limiting the upload to less than 10K QSO's? 


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] PSK31 Won't Key K3

[Bud Governale, W3LL]

1. The radio is a K3. The DX4WIN radio selection in preferences is Elecraft K3 
X4.

DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and RTS 
are checked.

2. I unchecked DX4WIN Radio Preference DTR and RTS and selected PSK31 PTT 
control setting.
Still not keying the transmitter.

3. DX4WIN CW is set for COM 5, DTR Line CW Keying, RTS Line PTT Control.
This setting works for sending CW.

In PSK31 Settings I have keying line set to DTR and PTT set to PTT control.
No transmitter keying with this setup.

If I change PSK31 PTT to Com 5 I get the device already open error.
I think this produces a conflict with DX4WIN claiming Com 5 and PSK31 also 
trying to claim Com 5. This is just a guess 
by
me.

I still don't know how to key the K3 transmitter in PSK31.

Bud W3LL
w...@arrl.net




- Original Message - 
From: ON4AOI on4...@skynet.be
To: 'Bud Governale, W3LL' w...@arrl.net
Sent: Saturday, August 08, 2009 10:11 AM
Subject: RE: [Dx4win] PSK31 Won't Key K3


1 what radio do you have ?
If not needed uncheck DTR and RTS
Select ptt control in psk31 setting
Setup dx4win-cw via same port like radio is
With correct setting of keyline and ptt for dtr and rts

Guy


 -Oorspronkelijk bericht-
 Van: Bud Governale, W3LL [mailto:w...@arrl.net]
 Verzonden: zaterdag 8 augustus 2009 15:58
 Aan: ON4AOI
 Onderwerp: Re: [Dx4win] PSK31 Won't Key K3

 Guy,

 Thanks for the suggestion.

 The PSK31 com port was set on VOX. I changed it to the radio com port
 which is com 5.

 When I did this I get the following message:

 An exception occurred device is already open.

 DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and
 RTS are checked.

 I think we now have a conflict with DX4WIN claiming Com 5 and PSK31
 also trying to claim Com 5. This is just a guess by
 me.

 What do I do to fix this?

 73,

 Bud W3LL
 w...@arrl.net


 - Original Message -
 From: ON4AOI on4...@skynet.be
 To: 'Bud Governale, W3LL' w...@arrl.net
 Cc: dx4win@mailman.qth.net
 Sent: Saturday, August 08, 2009 1:26 AM
 Subject: RE: [Dx4win] PSK31 Won't Key K3


 Make sure you set the correct comport for PSK31
 Right click in psk31 window next to the shortcuts
 and there you can change the settings

 Guy ON4AOI

  -Oorspronkelijk bericht-
  Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
  boun...@mailman.qth.net] Namens Bud Governale, W3LL
  Verzonden: zaterdag 8 augustus 2009 3:03
  Aan: dx4win@mailman.qth.net
  Onderwerp: [Dx4win] PSK31 Won't Key K3
 
  I'm trying to setup PSK31 using DX4WIN Version 7.07.02.
 
  When I hit the TX button I hear the tones but the K3 does not go into
  transmit.
 
  DX4WIN works perfectly in both MMTTY and CW. It keys and sends in
 both
  of those modes.
 
  What do I need to do to get DX4WIN PSK31 to key the K3?
 
  73,
 
  Bud W3LL
  w...@arrl.net
 
  __
  Dx4win mailing list
  Home: http://mailman.qth.net/mailman/listinfo/dx4win
  Help: http://mailman.qth.net/mmfaq.htm
  Post: mailto:Dx4win@mailman.qth.net
 
  This list hosted by: http://www.qsl.net
  Please help support this email list: http://www.qsl.net/donate.html





__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] PSK31 Won't Key K3

[Bud Governale, W3LL]

Version 7.07.02

If both CW and Radio ports in DX4WIN Preferences are changed to None,
then PSK31 can be set to Com 5 (the K3 port) and it will key the K3.

However, this leaves no control of the radio (K3) and is not a viable solution.

It test just proves, I think, that DX4WIN is not allowing itself and PSK31 to 
use
the same radio port.

Does anybody have PSK31 working with the K3 radio?
If so, what am I doing wrong.
Help please from anybody.

73,

Bud W3LL
w...@arrl.net

 
- Original Message - 
From: Bud Governale, W3LL w...@arrl.net
To: dx4win@mailman.qth.net
Sent: Saturday, August 08, 2009 11:54 AM
Subject: [Dx4win] PSK31 Won't Key K3


1. The radio is a K3. The DX4WIN radio selection in preferences is Elecraft K3 
X4.

DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and RTS 
are checked.

2. I unchecked DX4WIN Radio Preference DTR and RTS and selected PSK31 PTT 
control setting.
Still not keying the transmitter.

3. DX4WIN CW is set for COM 5, DTR Line CW Keying, RTS Line PTT Control.
This setting works for sending CW.

In PSK31 Settings I have keying line set to DTR and PTT set to PTT control.
No transmitter keying with this setup.

If I change PSK31 PTT to Com 5 I get the device already open error.
I think this produces a conflict with DX4WIN claiming Com 5 and PSK31 also 
trying to claim Com 5. This is just a guess 
by
me.

I still don't know how to key the K3 transmitter in PSK31.

Bud W3LL
w...@arrl.net




- Original Message - 
From: ON4AOI on4...@skynet.be
To: 'Bud Governale, W3LL' w...@arrl.net
Sent: Saturday, August 08, 2009 10:11 AM
Subject: RE: [Dx4win] PSK31 Won't Key K3


1 what radio do you have ?
If not needed uncheck DTR and RTS
Select ptt control in psk31 setting
Setup dx4win-cw via same port like radio is
With correct setting of keyline and ptt for dtr and rts

Guy


 -Oorspronkelijk bericht-
 Van: Bud Governale, W3LL [mailto:w...@arrl.net]
 Verzonden: zaterdag 8 augustus 2009 15:58
 Aan: ON4AOI
 Onderwerp: Re: [Dx4win] PSK31 Won't Key K3

 Guy,

 Thanks for the suggestion.

 The PSK31 com port was set on VOX. I changed it to the radio com port
 which is com 5.

 When I did this I get the following message:

 An exception occurred device is already open.

 DX4WIN in radio preferences has Com 5 set for the radio. Both DTR and
 RTS are checked.

 I think we now have a conflict with DX4WIN claiming Com 5 and PSK31
 also trying to claim Com 5. This is just a guess by
 me.

 What do I do to fix this?

 73,

 Bud W3LL
 w...@arrl.net


 - Original Message -
 From: ON4AOI on4...@skynet.be
 To: 'Bud Governale, W3LL' w...@arrl.net
 Cc: dx4win@mailman.qth.net
 Sent: Saturday, August 08, 2009 1:26 AM
 Subject: RE: [Dx4win] PSK31 Won't Key K3


 Make sure you set the correct comport for PSK31
 Right click in psk31 window next to the shortcuts
 and there you can change the settings

 Guy ON4AOI

  -Oorspronkelijk bericht-
  Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-
  boun...@mailman.qth.net] Namens Bud Governale, W3LL
  Verzonden: zaterdag 8 augustus 2009 3:03
  Aan: dx4win@mailman.qth.net
  Onderwerp: [Dx4win] PSK31 Won't Key K3
 
  I'm trying to setup PSK31 using DX4WIN Version 7.07.02.
 
  When I hit the TX button I hear the tones but the K3 does not go into
  transmit.
 
  DX4WIN works perfectly in both MMTTY and CW. It keys and sends in
 both
  of those modes.
 
  What do I need to do to get DX4WIN PSK31 to key the K3?
 
  73,
 
  Bud W3LL
  w...@arrl.net
 
  __
  Dx4win mailing list
  Home: http://mailman.qth.net/mailman/listinfo/dx4win
  Help: http://mailman.qth.net/mmfaq.htm
  Post: mailto:Dx4win@mailman.qth.net
 
  This list hosted by: http://www.qsl.net
  Please help support this email list: http://www.qsl.net/donate.html





__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] PSK31 Won't Key K3

[Bud Governale, W3LL]

I'm trying to setup PSK31 using DX4WIN Version 7.07.02.

When I hit the TX button I hear the tones but the K3 does not go into transmit.

DX4WIN works perfectly in both MMTTY and CW. It keys and sends in both of those 
modes.

What do I need to do to get DX4WIN PSK31 to key the K3?

73,

Bud W3LL
w...@arrl.net

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Log File Not Being Updated

[Bud Governale, W3LL]

Whenever upgrading, I merge the .ini file from the previous version to the new 
version.

However I found new log entries  were going to the .dxl file located in the 
previous version folder and not to the 
upgraded version.

As a work around, I uninstall and then reinstall the new version and not use 
the ini file from the previous version.
This places new entries into the log dxl file in the upgraded version folder.
Not being able to use the ini file from the previous version adds a lot of work 
to the upgrade process.

I noticed this happening for at least the last four upgrades in the 7 series.

What am I doing wrong?

Bud W3LL
w...@arrl.net 


___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win