[Dx4win] winkey2 support
works ok here (winkey usb ) com5 with dx4win 7.02.15 marc on4ma - Original Message - From: Mark [EMAIL PROTECTED] To: DX4WIN List Server DX4WIN@mailman.qth.net Sent: Monday, January 22, 2007 9:32 PM Subject: [Dx4win] winkey2 support I've had some problems with using my new WINKEY2 (USB) with DX4WIN. (works ok with the WINKEYER2) Would like to hear from someone who has been successful in using this. (and if it's possible to key alternate rigs using it within DX4WIN) Mark n2qt ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.17.5/645 - Release Date: 22/01/2007 16:10
[Dx4win] winkey2 support
Mark, Probably something is setup wrong in your PREFERENCES of DX4WIN Setup here is WINKEY (serial) connected via USB to SERIAL device Comport is 7 Check if the USB (comport) from Winkey2 is recognized in your Windozs settings. Guy ON4AOI -Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Mark Verzonden: Monday, January 22, 2007 10:33 PM Aan: DX4WIN List Server Onderwerp: [Dx4win] winkey2 support I've had some problems with using my new WINKEY2 (USB) with DX4WIN. (works ok with the WINKEYER2) Would like to hear from someone who has been successful in using this. (and if it's possible to key alternate rigs using it within DX4WIN) Mark n2qt ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] winkey2 support
I'm having the same problem. Just switched to 7.02.15, which I upgraded to from 6.03, largely because of Winkey support. It appears, however, that DX4WIN can't address the virtual serial ports created by the USB driver. I have set up COM7 for Winkey, but get no indication that they are communicating with each other. When I monitor the port, there is no indication of any data flow from DX4WIN to the Winkey. Can anyone confirm if this is a known limitation of the current release of DX4WIN? The virtual serial ports seem to work fine for rig control (using a MK2R+, which has an embedded Winkey 2). 73, Pete N4ZR At 04:32 PM 1/22/2007, Mark wrote: I've had some problems with using my new WINKEY2 (USB) with DX4WIN. (works ok with the WINKEYER2) Would like to hear from someone who has been successful in using this. (and if it's possible to key alternate rigs using it within DX4WIN) Mark n2qt ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] winkey2 support
I don't ever use my Winkey2 with DX4WIN but just checked it and it seems to work OK. I'm running DX4WIN 7.02.15. My virtual com port is set up as Com8. Alan N5NA Pete Smith wrote: I'm having the same problem. Just switched to 7.02.15, which I upgraded to from 6.03, largely because of Winkey support. It appears, however, that DX4WIN can't address the virtual serial ports created by the USB driver. I have set up COM7 for Winkey, but get no indication that they are communicating with each other. When I monitor the port, there is no indication of any data flow from DX4WIN to the Winkey. Can anyone confirm if this is a known limitation of the current release of DX4WIN? The virtual serial ports seem to work fine for rig control (using a MK2R+, which has an embedded Winkey 2). 73, Pete N4ZR At 04:32 PM 1/22/2007, Mark wrote: I've had some problems with using my new WINKEY2 (USB) with DX4WIN. (works ok with the WINKEYER2) Would like to hear from someone who has been successful in using this. (and if it's possible to key alternate rigs using it within DX4WIN) Mark n2qt From [EMAIL PROTECTED] Mon Jan 22 23:33:46 2007 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Mon Jan 22 23:35:29 2007 Subject: [Dx4win] FT-2000 radio file In-Reply-To: [EMAIL PROTECTED] References: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] At 09:47 AM 1/22/2007, KR4DA wrote: I still cannot read the QSX frequency from my FT-2000 I have to enter it manually. How is the FT-2000 working for you other guys who have one.. If it's working for you ANNOUNCE DX no probplem please email me direct... Did you try the .RIG file on http://dx4win.ad1c.us/ 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
[Dx4win] winkey2 support
At 05:22 PM 1/22/2007, Pete Smith wrote: I'm having the same problem. Just switched to 7.02.15, which I upgraded to from 6.03, largely because of Winkey support. It appears, however, that DX4WIN can't address the virtual serial ports created by the USB driver. I have set up COM7 for Winkey, but get no indication that they are communicating with each other. When I monitor the port, there is no indication of any data flow from DX4WIN to the Winkey. I am using a microHam microKEYER and the Winkey device keys perfectly in DX4WIN. It also works in Writelog. In the DX4WIN CW Preferences, I set Device type to Winkey and Port to COM7. All other boxes are None or 0. Make sure that the virtual COM port is for Winkey only, and is not used by any other device in DX4WIN. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
