Re: [Dx4win] IC-7610 x DX4Win
On Sun, Oct 29, 2023 at 10:22 AM Ricardo A. Rodrigues wrote: > Dear friends, I am having a lot of difficulty connecting my IC-7610 with > DX4Win. With the same parameters, the IC-7610 connects with the N1MM > without problems. Before updating the firmware I was able to connect using > the IC-7700 parameters. Can someone please give me a tip on where I'm going > wrong? Hi Dick, I'm sorry for your problems. What version of DX4WIN are you using? Is the baud rate set correctly? If it's a non-standard baud rate, you will have to uncheck the box in the Rig setup. What kind of interface are you using? The latest IC-7610 Rig driver for DX4WIN 9.x is here: https://ad1c.us/dx4win/radios/ Also make sure that the IC-7610 is running the latest firmware. If you need help, try here: https://groups.io/g/ic-7610 I have the same radio and it works very well with DX4WIN 9.x 73 - Jim AD1C -- Jim Reisert AD1C, , https://ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] ic-7610
Sorry i not change the title line to IC7800 Am 21.10.2018 um 09:11 schrieb Chris Sauvageot: Hello, what is the best RIG file for the Icom 7800 V3.10? Still i using "ICOM 7800_F210_500HZ" There 5 more but most of them Poll the 2. VFO (switch left to right and back) - that's not working for me. I not found any description what is the differ between these 6 files. I think nobody use the firmware 2.30 - since years V3.10 is the last version Any hint is welcome; maybe i can edit one of these files or any can share his file with me Tnx 73 Chris DL5NAM ch...@rf-kit.de __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to chris.sauvag...@gmx.de This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] ic-7610
Hello, what is the best RIG file for the Icom 7800 V3.10? Still i using "ICOM 7800_F210_500HZ" There 5 more but most of them Poll the 2. VFO (switch left to right and back) - that's not working for me. I not found any description what is the differ between these 6 files. I think nobody use the firmware 2.30 - since years V3.10 is the last version Any hint is welcome; maybe i can edit one of these files or any can share his file with me Tnx 73 Chris DL5NAM ch...@rf-kit.de __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] ic-7610
WOW... I guess I have not been paying attention. I did not realize the 7610 rig file had posted. (duh) Downloaded the zip file to the desk top and unzipped into dx4win "radio" folder and it works perfectly. *Many thanks for the heads up guys.* 73, Bob, K5BG On Fri, Oct 19, 2018 at 9:11 AM Jim Reisert AD1C wrote: > On Fri, Oct 19, 2018 at 8:06 AM steve sala K7AWB wrote: > > > There seems to be no rig file directly for the ICOM IC-7610 in my > current latest DX4WIN program. Yes, there are those who just say use > something similar. I bought the radio before I upgraded the program so I > thought someone would keep the program fresh with changes. I see there is > a 7610 rig file in AD1C’s website but when I clicked on it, up came > something that said I had a trial offer only; what is that about? It may > be to open the zip files? Once done, what do you do with them? > > Steve, you open the ZIP file and the .RIG file for the 7610 is inside > it. Then copy/save that RIG file to your DX4WINI "Radios" directory. > After that, start DX4WIN and go to Preferences | Radio tab, and find > the IC7610 selection. > > -- > Jim Reisert AD1C, , http://www.ad1c.us > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > Message delivered to k5b...@gmail.com > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] ic-7610
On Fri, Oct 19, 2018 at 8:06 AM steve sala K7AWB wrote: > There seems to be no rig file directly for the ICOM IC-7610 in my current > latest DX4WIN program. Yes, there are those who just say use something > similar. I bought the radio before I upgraded the program so I thought > someone would keep the program fresh with changes. I see there is a 7610 rig > file in AD1C’s website but when I clicked on it, up came something that said > I had a trial offer only; what is that about? It may be to open the zip > files? Once done, what do you do with them? Steve, you open the ZIP file and the .RIG file for the 7610 is inside it. Then copy/save that RIG file to your DX4WINI "Radios" directory. After that, start DX4WIN and go to Preferences | Radio tab, and find the IC7610 selection. -- Jim Reisert AD1C, , http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] IC-7610 Interface
__ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] IC-7610 Interface
On Tue, Mar 6, 2018 at 6:57 AM, Dan N8VV wrote: > > Jim sent a radio file to me to try. ZL3TE says it is working for him. > > > I set it up and when I click on QSO > Add Real Time the everything > locks up, the radio times out and I get the error message Radio > Time Out - Radio disabled. Did you set the baud rate correctly? Which interface are you using between the radio and the computer? Did you previously have a different ICOM radio that worked correctly with DX4WIN? In the 7610 menu settings for CI-V, I typically turn Transceive = OFF. I don't know if that will help in your case. Also remember that only ONE program can access the radio COM port at a time. -- Jim Reisert AD1C, , http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] IC-7610
On Mon, Mar 5, 2018 at 1:55 PM, Daniel Hardy N8VV wrote: > Has anyone come up with an INI file for the Icom IC-7610? For which version of DX4WIN? -- Jim Reisert AD1C, , http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] IC-7610 INI File
I'll be happy to write one if you'll ship me your radio. ;-) Try the 7600 as a starting point, see if that works, although I recall reading on the 7610 reflector that it may need a different default port number. If you're not comfortable doing that yourself, I can do it and send you the RIG file. If that does work, it won't be able to use all the features, but it'll be a starting point. On 12/8/2017 3:35 PM, Wes Printz W3SE / ZL3TE wrote: Trying in Plain Text - Sorry for the QRM On December 9, 2017 at 9:28 AM Wes Printz W3SE / ZL3TE wrote: Hello, I received my 7610 the other day. Latest DX4WIN update does not include the ini file yet. I presume one will be available soon? 73, Wes, W3SE / ZL3TE __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to k2...@arrl.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- 73, David, K2DBK http://k2dbk.blogspot.com http://k2dbk.com twitter: @k2dbk __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] IC-7610 INI file
__ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
