parts boxes.
73 de Ed, AA9OZ
-Original Message-
From: Dan Violette [dank...@socal.rr.com]
Date: 01/09/2013 09:29 PM
To: 'Ed Douglass' aa...@doorpi.net;, dx4win@mailman.qth.net
Subject: RE: [Dx4win] operating CW from keyboard and keyer without
unplugging
As others said, yes should work. Make
Ed,
I'm not Jim, but I've paralleled my keyer output and serial port
computer-generated CW for many years. Just make sure your keyer has an
isolated output, i.e., a relay (reed or solid state) rather than keying
directly via a transistor output.
Barry W2UP
On 1/9/2013 09:16, Ed Douglass
Not Jim, but I may have the answer: it shoudl be yes, with some caveats.
I assume that you have a good serial keying lead already ? I know nothing about
the Heathkit keyer.
the normal way is to get a jack plug Y adapter for your radio ; that is, 2
quarter inch jacks to one output that goes
: [Dx4win] operating CW from keyboard and keyer without unplugging
Ed,
I'm not Jim, but I've paralleled my keyer output and serial port
computer-generated CW for many years. Just make sure your keyer has an
isolated output, i.e., a relay (reed or solid state) rather than keying
directly via
As others said, yes should work. Make sure the small switch on the back of
the TS-850 is on manual keying (not using internal keyer). Since you are
using basically 2 external keyers (on/off keying of the line), either keying
will key the radio.
Dan KI6X
-Original Message-
From:
describing the modification.
73,
Blair
a...@aol.com
-Original Message-
From: Ed Douglass aa...@doorpi.net
To: dx4win dx4win@mailman.qth.net
Sent: Wed, Jan 9, 2013 11:00 pm
Subject: Re: [Dx4win] operating CW from keyboard and keyer without unplugging
Barry, Dave, Dan,
Thanks
6 matches
Mail list logo
