Serious question Bill. If you are not walking along a clear surface like a
sidewalk or in a play park, but are on the 'Trail', do you not have problems
with the counterpoise becoming tangled up in things, or do you only operate
when 'on the trail' while standing still after 'throwing out' the
On Tue, 2005-06-21 at 21:50 -0500, Bob Evans wrote:
Since I've now got the XV50 and XV144, it would sure be nice to see
the XV432 announced as being ready for shipment.
In the meantime you can build the XV222... :-)
___
Elecraft mailing list
Post to:
Gosh guyslooked at the link and came away
scratching my head! If you build a better mouse trap
you probably need to tell everyone that is is a better
mouse trap. No where did I find anything that told me
what value this is going to add to me in exhange for
my hard earned bucks. (i.e.
I agree the information is hard to find. The Web site assumes you came there
because you already know what the product is. However, I found good
information in the online manual, which I'll quote here:
Introduction
Every Elecraft K2 internal option kit includes some parts that need to be
Jim Wrote:
Gosh guyslooked at the link and came away
scratching my head! If you build a better mouse trap
you probably need to tell everyone that [it] is a better
mouse trap. No where did I find anything that told me
what value this is going to add to me in [exchange] for
my hard earned
Dear all,
this morning I have spoken with a german guy who is living on a greek
island (maybe with the sirene women?!?)
on 20m and was able to record my transmission and he replayed it to me.
So the first time I heard my own trasmission using the K2 and it is
realy very good!!! The K2 has a
Greetings DE KC9EHQ,
I am a little over 1/2 way through my KNB1 before I start on my anniversary
present (K1).
My lab is set up in our basement where I have my table in front of a window. I
do have a small oscillating fan blowing air out the window. Is that enough to
keep the solder
Michael Donna Heit [EMAIL PROTECTED] wrote :
Has anyone used the KX1 in the field with solar power ? If so, was
any info
sent on this list?
I am building a KX1 and was interested in using solar , or solar back
up
power for extended field use.
Thank you very much.
I do this all the
Martin: Gruess Gott!
Since I'll be using my K2 for this weekends Field Day for the SSB station I
figured I better start trying it out a bit more on SSB. So last night I
cranked it up on 40m and had several nice QSOs. Other than normal band
conditions that changed I got good audio reports
I've worked at locations that the folk who do soldering nearly their entire
shift have a fume hood to take care of that problem. Of course for 8 hours/day
5 days a week every week, that seems like a good thing to do, and may be
required by OSHA for all I know. I'm currently working at a small
On Wed, 2005-06-22 at 08:15 -0300, Brian Mury wrote:
In the meantime you can build the XV222... :-)
That might keep Bob going for a little while longer, but what about
guys that have all 3 transverters? . and all their option slots
stuffed full and a couple baluns. and a
Hi
There may be two different types out there or you may not have them in the
same intensity light. A Solar panel is a constant current generator. Its
current and open circuit voltage is dependent on the amount of light falling
on the panel. Each cell in the panel outputs about .5 volt in full
This is a follow up to my own problem for the sake of complete Elecraft
archives. :-)
A few weeks back I mentioned having slightly lower power on 30m. When
the power knob was at its max, I had 97 W while all other bands were
close to 120 W. What I forgot to mention is that on both 20 m and 30
How well does the T1 auto tuner remember frequencies within a band? I am
looking at making a vertical for 80m that will have a relatively small
bandwidth (say 30-40kHz). Therefore, I am wondering whether I could put a T1
auto tuner at the base of the vertical with a remote tune switch. I'll
I had problems with HI CUR on 14 18MHz, 3.6 and 3.7 Amps respectively.
Changing C80 C81 cured the problem, and I now have 2.9 and 2.4 Amps drawn.
73
Stewart G3RXQ
On Wed, 22 Jun 2005 10:36:20 -0400, Mike Markowski wrote:
This is a follow up to my own problem for the sake of complete Elecraft
Stewart Baker wrote:
I had problems with HI CUR on 14 18MHz, 3.6 and 3.7 Amps respectively.
Changing C80 C81 cured the problem, and I now have 2.9 and 2.4 Amps drawn.
What value did you change them to?
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
Folks,
I recently completed the KX1 and found a huge difference in the audio on 40M
(strong) versus 20M(weak). On 20M, I always need the AF gain turned up to max,
or close to it. Also, the s-meter does not function on 20M (it works on 40m). I
do not think this is an issue with the headphones
Vic Rosenthal wrote on 06/22/05 12:22 ET:
Stewart Baker wrote:
I had problems with HI CUR on 14 18MHz, 3.6 and 3.7 Amps respectively.
Changing C80 C81 cured the problem, and I now have 2.9 and 2.4 Amps
drawn.
What value did you change them to?
Apparently, all new kits will use 5600
Does anyone have a KAF2 they're not using? Please contact me off-list if
you do.
Tnx es 73,
ed - k9ew
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub
Did you redo an alignment of the KPA100 after, or you just changed the 2
caps ?
-Message d'origine-
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] De la part de Mike Markowski
Envoyé : 22 juin 2005 12:36
Cc : Elecraft Reflector
Objet : Re: [Elecraft] KPA100 power on 20m/30m, update
Vic
Paul, M1CNK asked:
How well does the T1 auto tuner remember frequencies within a band? I am
looking at making a vertical for 80m that will have a relatively small
bandwidth (say 30-40kHz). Therefore, I am wondering whether I could put a
T1 auto tuner at the base of the vertical with a remote
I have 2 Palm IIIc color handhelds and would like to trade one of them
for monochrome (non color) Palm. It comes with 8mb ram, hot-sync
cradle and charger. Model isn't important as long as it works.
--
Bob Baxter AA7EQ
Walnut Ridge, Ar.
___
Elecraft
Mike,
Absolutley, I use the feature all the time. Select the PLY on the menu and
press the tuning knob. The display will show P=0
73, KI4DGH
Chuck G.
From: mc [EMAIL PROTECTED]
Date: 2005/06/21 Tue PM 09:01:00 CDT
To: elecraft@mailman.qth.net
Subject: [Elecraft] KX1 turn off
is there
In a message dated 22/06/05 15:26:09 GMT Daylight Time, [EMAIL PROTECTED]
writes:
You can test the output current by connecting a 10 ohm 5 watt resistor
across the panel and measuring the output voltage
Reply: .
In practice you do not
I repeated the procedures that dealt with adjustments on the board, but
skipped over things like the temperature calibration and current limit
steps.
Mike AB3AP
Jean-François Ménard wrote on 06/22/05 12:56 ET:
Did you redo an alignment of the KPA100 after, or you just changed the 2
caps ?
Hi
Thanks for your input and this is exactly the method I use to check my
panels. I just suggest the resistor method because some DVM's do not have
current ranges and the possibility of damage to the current ranges if the
wrong range is used. Measuring current with a DVM is always a possible
Hi, Mike.
You're right. This is normal behaviour for the KX1.
The S meter is lower on 20m because it driven by an
audio derived AGC, and audio levels are lower on 20m
due to the design of the radio.
It does work though... with a 20-40 foot wire
vertically in a tree, in good solar
Completing the K2 set, last night I finished the KAT100 tuner! I have
an attic dipole (for bad wx use) and a classic 135' Zepp strung over to
the woods perfectly placed about 145' from the house. So when the ant
tuner was done I hooked up each antenna to its two connectors.
But I had no signal
Hello all!
Here are the covered bridge activators to date who plan to activate a
bridge sometime during this fun event:
Canada:VE1REC
CA:WA6BFH
GA:N2MC, K4AQ
OH:KI8I
PA:N3YMX, K3YTR, KC4OCE, WA3WSJ
IN:N9LAH
TN:KF4YUZ
If I missed anyone or
Hi Mike,
Reminds me of what I did last week checking my K2 mods. I was not
getting as much audio on 30 meters as I was getting on 20 M and 40 M. I
figured I messed up one of the mods. I finally realized that I wasn't
hearing many signals either, so propagation must have sucked as well.
On Wed, 2005-06-22 at 07:22 -0700, Gregory P. Daly wrote:
That might keep Bob going for a little while longer, but what about
guys that have all 3 transverters? . and all their option slots
stuffed full and a couple baluns. and a load we're running
out of stuff to build!
Today I completed the first Test Alignment of the KX1 # 00920. All tests went
exactly as the book calls for, and the building proceeds with no problems up to
this point.
I do have the KXPD1, KXB30,and the KXAT1 option kits as well; I was wondering
if it would be wiser to finish building the
K2 4993 with associated accessories (KPA100/DSP/etc..) showed up on my
doorstep this afternoon. Looks like a daunting task that I'm sure will take
several weeks to complete at the pace I'll be able to withstand. Thanks to
all for the words of encouragement and insight to building the K2.. I
NZ8J wrote:
K2 4993 with associated accessories (KPA100/DSP/etc..) showed up on my
doorstep this afternoon.
Looks like #5000 may have already been purchased and might be on it's
way to someone!
73 de Larry W2LJ
BTW - good luck, Tim!
___
Mike, KD7YLA, asked:
Today I completed the first Test Alignment of the KX1 # 00920. All tests
went exactly as the book calls for, and the building proceeds with no
problems up to this point.
I do have the KXPD1, KXB30,and the KXAT1 option kits as well; I was
wondering if it would be wiser to
Word has it that K2 #5000 might be headed to the Smithsonian!
73,
Tom N0SS
At 05:01 PM 6/22/2005, Larry Makoski W2LJ wrote:
NZ8J wrote:
K2 4993 with associated accessories (KPA100/DSP/etc..) showed up on my
doorstep this afternoon.
Looks like #5000 may have already been purchased and
Thanks to the groupe I was offered a knob.
All I need to do now is find an allen wrench that fits!
73
N2DH
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub,
Bill,
The allen wrench size for the FT-100 knob is metric and as I recall it is
2mm, I could be wrong (blame fuzzy memory), but it is very close to that
size - I do know 2.5 mm is too big. Ignore the US sizes when looking, none
of them will fit - I tried and had to go dig for my metric set.
For those that enjoy web based venues, the QRP forum has returned.
www.zerobeat.net/qrp/phpBB2/
Feel free to drop by, add some content, and/or make some suggestions for
topics.
73,Thom-k3hrn
www.zerobeat.net Home of QRP Web Ring, Drakelist home page,
Free Classified Ads for amateur radio,
Looks like #5000 may have already been purchased and might be on it's
way to someone!
73 de Larry W2LJ
*
I was the poster on May 25 who asked the question on who got or who
was going to get SN # 5000. Now that I have another K2 in route,
(thank you to W8IIE for that!) you
A trade has been made. Thanks to those who replied for their interest
Bob Baxter AA7EQ
On 6/22/05, Bob Baxter [EMAIL PROTECTED] wrote:
I have 2 Palm IIIc color handhelds and would like to trade one of them
for monochrome (non color) Palm. It comes with 8mb ram, hot-sync
cradle and charger.
41 matches
Mail list logo