Gary, just a possibility - have you checked the CONFIG:AF GAIN setting?
It can be HI or LO and the default is LO.
On 10/1/08 00:07, Gary Scott [EMAIL PROTECTED] sent:
Hi All
I have K3 #168 mounted /M in my 18 wheeler and with all the noise in the
cab,and my less than perfect hearing its
In a recent message, David Ferrington, M0XDF [EMAIL PROTECTED]
wrote ...
Gary, just a possibility - have you checked the CONFIG:AF GAIN setting?
It can be HI or LO and the default is LO.
This does not affect the sidetone level which is independent of the AF
gain setting.
73
--
David G4DMP
I have now completed my modification by installing the replacement power
module. The changes required to fit the new module are very simple, it is
just a matter of removing 2 links and one inductor and installing one link
and two resistors, plus the module.
Power output of 20W was achieved
Tony
very FB. a lot of us took the K2 plunge to enjoy the
building experience, and using a fine radio we built
afterwards. focus on getting the correct parts in
place and making good solder joints - and do the
intermediate checkouts. when part ID is confusing ask
for help. make sure your
All:
MANY responses - most like the idea, but do not like the additional current
draw. For a KX1, the current should be nil (if possible!); for the K1 (and K2
and K3), I (me-own-self) am willing to 'take the hit' of a few more mA. If it
is an *option* (like the KDSP2), you can add it - or not
Bob,
Those DC voltages are not significant to your problem.
The BFO signal is routed through the KSB2 board and for SSB it serves as
the carrier frequency for the balanced modulator while on CW the
components around Q3 route the BFO signal from P1 pin 12 , through Q3
and back out to P1 pin
Any configuration
email: fraz1 at bellsouth.net
73 John
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
Eric,
Great news your having the K3 wide-range TX mechanism implemented!
Do you have any information about the TX frequencies (or ranges of
frequencies) supported (or NOT supported, whichever is easier) when
operating the transmitter out-of-band? Even a rough idea would be very
helpful.
For
From: H. Cary III
Sent: Thursday, January 10, 2008 9:19 AM
To: 'elecraft@mailman.qth.net'
Subject: For Sale: Tilt Stand for K2 or EC2 Enclosure
I have an ETS15 matching tilt stand (measures 2.5) for K2 or KAT100 or EC2
Enclosure; never used, in original package. New it is $14; I will sell for
The tilt stand has been sold.
Cary, K4TM
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Hi, Tony:
I built my K2, SN 1289, in 1980 and have thoroughly enjoyed it ever since. I
was first licensed in 1952 and have always had an HF transmitter I built
myself, either from a kit or scratch. I was about to give up and go after my
first factory built rig when I ran into a guy using a K2 on
The Aptos-to-Rhode Island 2-day USPS Priority Mail pipeline still works.
K3/100 kit s/n 202 ordered the morning of 5/4 arrived in
today's(1/10/2007) mail.
Let the FUN begin!
73,
Ken K3IU
Portsmouth, RI
___
Elecraft mailing list
Post to:
Wonder if anyone is using a K3 to work the WSJT meteor-scatter and/or EME
digital modes on 6M. I'm just now starting to explore these modes with my
current crummy rig (TS-2000), and it's really cool to be able to work this band
with no ionospheric propagation. Additionally, MS will usually
I have a W9GR audio DSP kit that I built years ago. To give you an idea
how long ago, it uses a TI TMS320C10 DSP! (The invoice is dated
9/16/92.)
Despite that, and despite the fact that it uses only 8-bit digitization,
it works amazingly well. I found the LMS noise reduction works great on
Don ZZZ? Maybe a short daily nap at best... I have had this theory
concerning Don for some time!
Special thanks to Don Wilhelm for nailing it. I don't think he ever
sleeps! ;-)
73,
Bob K5WA
___
Elecraft mailing list
Post to:
Mike N8XPQ wrote:
Has anyone in this weeks shipment received notice from the powers to be
that their prized package will be sent out this week? I haven't seen any
new posts regarding this. I am still anxiously awaiting to hear reference
my order.
Notice that my order for a K2/10 kit
My configuration...
have K3 ... don't need cash
73 de
Thomas, DM7TN
K3/100 #78
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of fraz1
Sent: Thursday, January 10, 2008 3:24 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Have CashWill Buy...K3
Ha, ha!!! I just got an in-box full of messages questioning my misstatement
about having built my K2 in 1980 instead of 1990.
Now everyone can ask you if K2 orders are really as backed up as K3
orders...
What a difference a keystroke makes!
Ron AC7AC
-Original Message-
Mike N8XPQ
Anyone care to sell their KPA 100 plus KAT 100 in an EC2 enclosure?
Otherwise would think about the KPA 100 top cover and separate KAT100 ATU.
Deni, F5VJC
K21188
-
73, Deni F5VJC
Yes I'm waiting for my K3 too...:confused:
--
View this message in context:
My wife says I sleep too late!! She is an early riser.
Actually I awake in the vicinity of 8AM most days, but am not fully
functional until about 10 - I don't believe the human body was intended
to be shocked awake - I put away the alarm clock after I retired.
Bedtime is shortly after the 11PM
An admirable lifestyle if I may say so!
73 Stephen G4SJP
On 10/1/08 21:26, Don Wilhelm [EMAIL PROTECTED] wrote:
My wife says I sleep too late!! She is an early riser.
Actually I awake in the vicinity of 8AM most days, but am not fully
functional until about 10 - I don't believe the human
Has anyone checked the real world stability of the K3 WITHOUT the TCXO option
installed? At room temps.
--
View this message in context:
http://www.nabble.com/Frequency-stability-W-O-TCXO-option-tp14745795p14745795.html
Sent from the Elecraft mailing list archive at Nabble.com.
Ron D'Eau Claire wrote:
Ha, ha!!! I just got an in-box full of messages questioning my
misstatement
about having built my K2 in 1980 instead of 1990.
Now everyone can ask you if K2 orders are really as backed up as K3
orders...
What a difference a keystroke makes!
I didn't even
Ah, ok, my mistake
On 10/1/08 08:47, David Pratt [EMAIL PROTECTED] sent:
In a recent message, David Ferrington, M0XDF [EMAIL PROTECTED]
wrote ...
Gary, just a possibility - have you checked the CONFIG:AF GAIN setting?
It can be HI or LO and the default is LO.
This does not affect the
The stock K3 has a TCXO already, so the question needs to be more
specific (but we know what you mean).
The stock TCXO is rated at 5 ppm while the optional TCXO is rated at 1 ppm.
In a normal controlled temperature environment, I personally see no need
for the high stability option, but for
Hello,
HRD runs fine remotely over my LAN. The host (server) PC is connected
(via COM1) to the K3.
But ...
Minor detail escapes me: the K3 audio isn't getting to me at the remote PC.
Audio output from the K3 goes into the host PC sound card, then comes
out to a couple speakers local to the
Hello Tony:
I am a little ahead of you, just getting ready to go through the second set
of testing and tuning the receiver. I second what the others have said
about using a visor with several interchangeable magnifying lenses. Also
make sure that you match parts to their pictures and don't be
Ron and All,
I don't think 1990 is right either! I built one of the first 100, and it
sure wasn't in 1990!
Dave
- Original Message -
From: Ron D'Eau Claire [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Thursday, January 10, 2008 1:43 PM
Subject: RE: [Elecraft] Notice of
Field Test shipment of the first 100 K2's was Feb of 1989. :-)
9 years ago - Wow!
73, Eric
David Yarnes wrote:
Ron and All,
I don't think 1990 is right either! I built one of the first 100, and
it sure wasn't in 1990!
- Original Message - From: Ron D'Eau Claire [EMAIL
Eric and All,
Now Eric has gone blank! C'mon you guys! It was 1999! Not 1989, or
1980!! Good grief--you are trying to make me older than I already am!
Dave W7AQK
- Original Message -
From: Eric Swartz - WA6HHQ, Elecraft [EMAIL PROTECTED]
To: David Yarnes [EMAIL PROTECTED]
Lng day here in Aptos!
1999... (But feels like we've been doing this since '89 ;-)
73,
Eric
David Yarnes wrote:
Eric and All,
Now Eric has gone blank! C'mon you guys! It was 1999! Not 1989, or
1980!! Good grief--you are trying to make me older than I already
am!
Dave W7AQK
I have been using my K2 for over a year now...decided to recheck
the temp cal. It doesn't seem to work. It reads 0 and no VFO adj
effect. After about 2-3 sec I hear several relays click in quick
succession...audio is much diminished ... turning the unit off and
back on corrects the
Har, har!!!
Okay. Let me think. The invoice says 2000. I was thinking 1990 when I wrote
1980, but my watch is a decade slow.
One thing about getting a little older is that the years fly by faster than
I can turn pages on the calendar!
Ron AC7AC
-Original Message-
From: Eric Swartz -
Just did the 1.58 update and AUTOINF does not seem to show up in either of the
Menus. Am I missing something?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub,
Boy I wish people would change the subject. When I see NOTICE OF SHIPMENT
I get all excited until I realize that it isn't MY shipment that's being
referred to!
Tim
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to
On Thursday 10 January 2008 08:53:24 pm bill KE5KWE wrote:
Also
make sure that you match parts to their pictures and don't be hesitant of
calling the guys and girls at Elecraft, when a part does not quite match.
Turns out that certain parts have changed appearances by color or shape.
I
36 matches
Mail list logo
